Bandrollers for 14" Taiwan Saws

Your bandsaw's lateral guides keep the blade from twisting as you begin cutting a curve. They also help damp out harmonic flutter and vibration, so your kerf is smoother, cleaner and as narrow as the blade allows. The guides keep the blade from deflecting easily under heavy feed pressure, and they also contribute to keeping straight cuts straight. The closer the guides are to the blade, the better the can carry out these essential chores.

That's where Bandrollers come in. Their high quality double-sealed ball bearings are virtually friction-free so they can be set in direct contact with a blade, leaving no gap at all for stray vibration or twist to sneak through. Unlike solid steel guides, they will not cause heating, wear or damage to the weld.

Bandrollers are very cleverly designed to slip right into your saw's 1/2" x 1/2" guide holders, with no new hardware required. They're available to fit Delta 14" bandsaws with one lower guide angled at 45°, and Taiwan-made clones with all four guides straight. You'll still want a set of Cool Blocks for scrolling with 1/8" and 1/16" blades, but all your blades 1/4" and wider will give you their very best performance when you put Bandrollers on your saw.

Notice to residents of California: Click here to view Proposition 65 warning