The Fein Turbo III vacuum can actually make your woodworking more pleasant. A woodworker's life is noisy enough without a vacuum at your side screaming and whining excessively. For years Fein vacuums were already our favorite shop vacs because they run so much quieter than most other vacs. Now Fein has made them even quieter by adding Electronic Suction Control, which lets you adjust the power to fit the job while keeping noise to an absolute minimum. You can actually have a conversation while this vac is running!
Electronic Suction Control will also improve the performance of your random orbit sander by allowing you to apply the right amount of suction to extract dust without needlessly pulling the sanding pad down against your stock. The new model also features a wider tank footprint plus 6 swivel casters for extra stable portability.
The Turbo III is Fein's heavy duty workhorse with a 15 gallon dry capacity, rated at 126 CFM, a static pressure of 99" and decibel rating of 58. With a 10' x 2-1/4" hose, it'll handle heavy loads of floor trash and up to portable planer-sized tools. Its two-stage motor won't overheat even if the line becomes temporarily clogged. The Turbo III incorporates a tool-activated switch that turns the vac on automatically as soon as you trigger your tool's switch. Release the trigger and the vacuum turns off after a 3 second delay that clears the hose of debris.
Can be used wet with an optional filter. Includes the 10' x 2-1/4" hose and a 5 micron cloth motor filter.
An optional Tool Kit is available and includes: two 2-1/4" wands, crevice tool, brush, utility nozzle, floor sweep and wet filter.
Dry/Wet Volume: 15/12 gal.
Hose Dia./Length: 2-1/4"/10'
Cord Length: 16'
Static Pressure: 99"
CFM: 126
Weight: 36 lbs.
