With the most powerful motor on the market, this plate joiner is also the most versatile. The 7.5 amp motor turns the blade at 10,000 rpm for smooth, accurate cutting. Users can choose from seven different cutting operations for a variety of fasteners. Slots can be cut for the standard #0, #10, and #20 biscuits as well as #6 (Max) and an exclusive, full-thickness, FF biscuit for building cabinet face frames. The unit comes with a four-inch blade for standard cuts and the unique two-inch blade for cuts in stock as narrow as 1-1/2 inches. Two more settings are used for installing hinges and knockdown hardware.

Accuracy is ensured by the very advanced fence system of this joiner. A micro height-adjust knob allows perfect biscuit placement. The unique tilt system allows the fence to be adjusted to a wide range of angles from 0 to 135 degrees. By tilting the fence to 135 degrees, miter cuts are referenced from the outside or finished side, of the workpiece. This ensures proper alignment of the finished side of a mitered joint, even if the pieces being joined are of slightly different thicknesses, as with solid hardwoods and plywoods. Also, the pivot point for the fence is directly on the face of the tool so the height scale always reads true, no matter the angle. A fence plate is included for easily centering two-inch stock and for use as a spacer allowing a double-wide slot to be cut which can hold two biscuits for more reinforcement. Adding to the accuracy, the bail handle is attached directly to the fence allowing one hand to stabilize the fence during cutting operations while the other plunges the motor. Changing blades is easy with a keyhole-slotted blade cover and a spindle lock for one-wrench blade changes.