Every router table needs a power switch—it's unacceptably dangerous, not to mention awkward, to use the switch on the router itself, buried out of sight beneath the table. This ready-to-use accessory lets you mount a switched power outlet right where you need it at the front of your router table or other shop-made fixture. It's a lockable switch; if you have small children around the shop, just remove the toggle tip to make the router table safe from unauthorized start-up. The switch controls power to a built-in 110-volt receptacle which handles loads up to 15 amps—plenty for any 110-volt router on the market. Screw tabs allow easy surface mounting wherever convenient. 5-3/4" long x 2-1/2" wide x 3" deep. Comes with 5 ft. power cord.

NOTE: This switch does not mount completely flush. There is a small gap (approximately 3/16") between the box and the surface it is mounted on, due to the round head screws used on the back of the switch by the manufacturer. For a flush mount switch, see our Deluxe Router Table Switch (104907).