Waterlox is a reliable, easily applied tung oil-based varnish. Polymerized tung oil, ester gum, polymerized linseed oil, and a high ratio of phenolic resin allow it to build a tough surface film which resists scuffs and staining admirably. Waterlox Original Marine Finish is a clear, high gloss finish coat which penetrates wood, enabling it to resist moisture, the harmful UV rays of the sun, salt and fresh water exposure, and heat and cold. Waterlox Original Marine Finish is recommended for all exterior wood surfaces as a finish coat, such as marine furniture, paneling, all boat woodwork, exterior furniture, doors, railings, fences and decks. Apply by wiping, brushing, rolling, spraying or with lambswool pad; thin and clean up with mineral spirits or turpentine. Waterlox is tack-free and ready to recoat in 6-24 hours dependent on temperature, humidity and ventilation. Repair is easy: sand out the damage and recoat! Begin all exterior finishing projects with 1-2 coats of Waterlox Original Marine Sealer, followed by 1-2 coats of Waterlox Original Marine Finish. Coverage is around 400 square feet per gallon per coat; soft woods require more coats than very hard woods.