Festool TS 55 EQ Plunge Cut Circular Saw with CT26 Vacuum

Bring the accuracy of a panel saw to your shop with the Festool TS 55 Circular Saw & Guide Rail System. The cutting accuracy of this saw far exceeds that of standard circular saws. Not only can you cut precisely on your measured mark every time, your cuts will be virtually splinterfree on both sides of your work. Unlike conventional circular saws, Festool's design allows the saw blade to retract into the housing giving you the option to start and end the cut accurately anywhere on the material. A built-in retractable riving knife moves with the blade providing added safety. The saw can tilt up to 45° while on the guide rail, giving a level of accuracy for bevel cuts that is simply astounding. The dust extraction shroud with rear facing swivel port allows for a clear view of the cut even with a vac hose attached. A 10 amp, soft start motor provides constant speed under load with variable speed adjustment from 2,000-5,200 rpms. Motor has temperature and current-triggered overload protection. The 6-1/4" blade 48T carbide blade provides a cutting depth (when on the guide rail) of 1-15/16" at 90° & 1-7/16" at 45°. Weighs 9.92 lbs. TS55 includes 48T blade, 55" guide rail, plastic splinterguard and a Systainer 4 storage case.

Since most of Festool's power tools are engineered for efficient and simple shop-vac connectivity, it's no surprise that Festool would also make a highly innovative, full-featured shop vacuum. The CT 26 E HEPA Dust Extractor comes with HEPA filters that filter out particles down to .3 microns. Its 6.9 gallon container rolls smoothly on large wheels, is nearly impossible to tip over and has locking wheels for stability. The self-cleaning disposable filter bag resists caking - maintaining maximum suction. Tool triggered switch with smooth start-up and shut off delay, and adjustable electronic suction control make this the ultimate vac to connect to your hand power tools. The quiet (72db) 10 amp motor creates an impressive 137 CFM and 96" of static pressure. The open top design includes hose and cord storage and a carrying handle. The top also includes locking latches to securely attach the Festool Systainer® tool containers, keeping your power tools and accessories close at hand. Weighs 28.7 lbs. The CT26E comes with HEPA Filters, 11.5' anti-static hose and disposable filter bag. Measures 25" x 15" x 22" high.

Festool# P26561432 (Replaces P26561174)

Festool's 30-Day Money Back Guarantee

Buy with confidence. If you are not completely satisfied, return your tool within 30 days and you will receive a refund of either your purchase price or the lowest retail price at which the same item has been offered since your date of purchase. Freight charges are not refundable.

Festool's Three Year Warranty

Festool offers a 3 year limited warranty, one of the longest in the industry. This warranty is valid on the pre-condition that the tool is used and operated in compliance with the Festool operating instructions. Festool warrants that the specified tool will be free from defects in materials and workmanship for a term of 3 years from the date of purchase.

Conditions of 1 + 2 Limited Warranty

All customers receive a free extended limited warranty (1 year + 2 years = 3 Years) on new Festool power tools purchased from an authorized retailer. Festool is responsible for all shipping costs during the first year of the warranty. During the second and third year of the warranty the customer is responsible for shipping the tool to Festool. Festool will pay for return shipping to the customer using UPS Ground Service. All warranty service is valid 3 years from the date of purchase on your receipt or invoice. Proof of purchase may be required.

Due to Festool policy, Highland Woodworking cannot ship Festool products outside the U.S. Any Festool order that we ship requires a U.S. shipping address.

Notice to residents of California: Click here to view Proposition 65 warning