Masterpiece Wood Finish - single units

These products are designed to be used together in sequence.

The BASECOAT is made with special oils that penetrate to seal the wood and enhance its color and grain.

The MIDCOAT is a select blend of oils and waxes that continue to feed and build within the woods pores, protecting the wood and creating an affinity for the final topcoat of wax.

The TOPCOAT special paste wax provides additional sheen and luster to the finish.

CAUTIONS and NOTES – Do Not Use without Reading and Understanding:

• Not for use on tabletops or any surface where liquids are normally present.
• All applications of stain (if used), BASECOATs, MIDCOATs, and TOPCOATs must be completely dry to the touch before proceeding to the next application to get the desired results. Drying time is at least 24 hours and subject to many variables including thickness of application, temperature (ideal is 72 degrees), humidity, and other environmental factors.
• This product contains NUT OILS and may cause an allergic reaction. Use protective gloves, clothing, and eyewear. Clean all surfaces that come into contact with this product while in use.
• A prepared surface is one that has been sanded smooth with all defects removed. The required final sanding grit and or burnishing (ScotchbriteTM pads 0000) requirements are different for many species. If you are not sure, test to check results on prepared scrap surfaces.
• Properly dispose of all oily rags and applicators. They can cause spontaneous combustion.
• Do not ingest; follow instructions on MSDS if ingested.
• Flush eyes thoroughly with water if the finish gets in the eyes. Eye protection is recommended.

Additional Information

Masterpiece Wood Finish Instructions

Masterpiece Topcoat MSDS
Masterpiece Basecoat & Midcoat MSDS

Notice to residents of California: Click here to view Proposition 65 warning