Oneway 1236SD Sit Down Lathe

Model 1236 offers 36" between centers, with 12" swing over the ways or 9" swing over the banjo (toolrest base).

Overall length is 46". The 1-5/8" diameter headstock spindle is mounted in four sealed-for-life ball bearings, and the inboard spindle nose is threaded 1"-8 tpi to accept a very wide variety of faceplates, chucks and accessories. The outboard end is threaded 3/4"-16 tpi for vacuum accessories. Both headstock and tailstock accept #2 Morse taper accessories. A 24-position indexing head is standard. Like a scaled-down version of Oneway's massive full-size lathes, Model 1224 is built on a heavy 4-1/2" diameter steel tube for almost perfect torsional rigidity. The ways are offset forward for easy access, allowing waste to fall through cleanly.

Model 1224 comes with a 1HP motor, which works on either 110 or 220 V and features a fully electronic variable speed switch with soft start, constant torque, and dynamic braking to a soft stop. A 2-step drive pulley lets you choose the speed range best suited to the diameter & length of the project at hand: 0-1200 or 0-4500 rpm. Standard equipment includes a steel stand, safety drive center, live tail center, 9" stainless steel toolrest & a 3" faceplate. Weighs 300 lbs.

An optional 24" bed extension (sold separately) bolts on in seconds, extending the length between centers to 48".

Notice to residents of California: Click here to view Proposition 65 warning