Iwasaki Set of 2 Extreme Fine Cut 6" Wood Files includes:

• 6in Flat Extreme Fine Cut Carving File 7-3/4" overall length, 5-3/8" cutting length, 5/8" width, 5/32" thick
• 6in Half Round Extreme Fine Cut Carving File 7-5/8" overall length, 5-1/4" cutting length, 5/8" width, 1/8" thick
• One Wood Handle for each of the above

Referred to as joinery or plane maker floats, these files are a woodworkers dream for shaping, sculpting, easing hard edges & joinery tuning. They remove material quickly like a rasp, but leave a very clean surface finish like you'd get from a file.

The curved teeth are arranged like a single cut file, but with the face of each tooth shaped like a mini-chipbreaker. The wood shaving breaks off & is forced up & away from the face of the file so the teeth are less prone to clog. The tailings created are not dust, but ultra mini-shavings & look as if they came from a tiny plane! The teeth are sharp & hard for efficient cutting & long life. Besides cutting standard woods, they can be used on bamboo, OSB, MDF, plastics & resins. All files have safe edges (no teeth on the edges) & are perfect for detailing up to an adjacent surface you don't want to cut.

The half round file has teeth only on the convex side. The flat file has teeth on both sides. Each file in this set of 2 includes a wooden handle.

Note: All sizes are approximate due to metric conversions.

Notice to residents of California: Click here to view Proposition 65 warning