Sharp Fast Fingernail Grind Sharpening Jig System
Grinding a fingernail edge profile on bowl gouges is a difficult task without a jig. The popular Wolverine Jig that is sold for use with a bench grinder has a fingernail grind attachment that works. However, without due diligence, the tang end of the jig can slip or jump about causing injury to the operator and/or the tool or grinding wheel. Now with the Sharp Fast jig you'll keep your gouge to the wheel, preventing accidental run off & better control the placement of the gouge, keeping to the center of the wheel. This is achieved with a swivel guide block at the end of the slide arm which securely houses the tang of the tool holder. The tool jig can swing the full arc for grinding, without fear of the pivot point of the tool jig moving.
The Jig System includes the tool guide, slide arm and a holding base that mounts below your grinder to accept the slide arm of the jig. The Basic Tool Guide consists of the tool holder and slide arm. If you don't already own a Wolverine grinding jig, you'll need the system. A spare holding base expands the system to both wheels of your grinder and makes a great second base for the V-arm of the Wolverine. The opening of the tool guide is large enough for 1" OD bowl gouges. Bench grinder and turning tool not included.
Notice to residents of California: Click here to view Proposition 65 warning