Sharp Fast Holding Base
The Sharp Fast Holding Base mounts below your grinder to accept the slide arm of the Sharp Fast jig. Having multiple bases allows you to expand the Sharp Fast Fingernail Grinding system to both wheels of your grinder or makes a great second base for the V-arm of the Wolverine. Grinding a fingernail edge profile on bowl gouges is a difficult task without a jig. The popular Wolverine Jig that is sold for use with a bench grinder has a fingernail grind attachment that works. However, without due diligence, the tang end of the jig can slip or jump about causing injury to the operator and/or the tool or grinding wheel. Now with the Sharp Fast jig you'll keep your gouge to the wheel, preventing accidental run off & better control the placement of the gouge, keeping to the center of the wheel. This is achieved with a swivel guide block at the end of the slide arm which securely houses the tang of the tool holder. The tool jig can swing the full arc for grinding, without fear of the pivot point of the tool jig moving. This is an additional holding base only to be used with a complete Jig System which would include the tool guide, slide arm and a holding base . The Basic Tool Guide consists of the tool holder and slide arm is also available separately. If you already own a Wolverine grinding jig this base is compatible with the V-arm of the Wolverine. Sharp Fast Base only - holding jig, bench grinder and turning tool not included.
Notice to residents of California: Click here to view Proposition 65 warning