3M Scotch-Brite Hand Pad Holder

3M Scotch-Brite Hand Pad Holder

Use a hand pad holder with 3M Scotch-Brite hand pads to get the smoothest finish on flat surfaces. Cut the hand pad a little larger than the holder and press it on the bottom. The holder will keep the hand pad flat without marring your finish.

The 952 Heavy Duty Hand Pad Holder is 3-3/8" wide by 5-3/4" long. It can handle pads up to 4" by 6". The bottom of the heavy duty holder has short, stiff "bristles" mounted in a resin plate. The bristles slide into the mesh of Scotch-Brite pads and hold on tight.

The 961 Light Duty Hand Pad Holder is 3-1/4" wide by 4-5/8" long. It can handle pads up to 3-1/2" by 5". It uses 3M's Twist-Lok attachment system. The bottom of the holder has many small T-shaped hooks that grip the Scotch-Brite pad similar to hook and loop. Press it onto the pad and give it a little twist to grip the pad.