Czeck Edge Marking Knife

Czeck Edge Marking Knife

Czeck Edge Marking Knives are beautiful to the eye and a delight to use. With the back of the blade flat and the dual edge 40° bevels on the top of the blade, the knife registers snugly against a straight edge from both the left and right sides. The blade is bedded into a machined bronze ferrule with three turned grooves that provide a gentle resting place for your index finger. The graceful curves of the handle are easy to grip & give the hand stable, ergonomic control of the tool.

Czeck Edge marking knife handles are sanded through 2000 grit and finished with several coats of shellac. The blades are precision CNC milled and ground on all sides and edges.

Czeck Edge Marking Knives are Made in the USA.

Pattern Pilot Marking Knife

The Pattern Pilot Marking Knife has a 1-3/4" long x 3/8" wide x .060" thick blade with a 65° included angle forming the point. Blade is O-1 tool steel, hardened to RC59-60 (the whole blade, not just the tip). Overall length is 7-1/2".

Super Kadet II Marking Knife

The Super Kadet II Marking Knife has a 1-7/16" long x 5/16" wide x .029" thick blade with a 65° included angle forming the point. The blade is tungsten carbide, which should retain its edge almost indefinitely without sharpening. Overall length is 7-5/8".