SEARCH our FREE online woodworking library

Woodworking Tool Manufacturers

Browse Categories

Bridge City HP-12 Dual Angle Bench Plane

Bridge City HP-12 Dual Angle Bench Plane
Bridge City HP-12 Dual Angle Bench PlaneBridge City HP-12 Dual Angle Bench PlaneBridge City HP-12 Dual Angle Bench PlaneBridge City HP-12 Dual Angle Bench PlaneBridge City HP-12 Dual Angle Bench PlaneBridge City HP-12 Dual Angle Bench Plane
on sale
Bridge City HP-12 Dual Angle Bench Plane
Highland Item # D308603
While supplies last.

Price : $799.99
Sale Price : $769.99
Only 1 available!

Confirm Details

* denotes required field


Detailed Description

Bridge City HP-12 Dual Angle Bench Plane

This tool has been in our display case since early November 2019 and has been very lightly used. It is in near-perfect condition. No blemishes or scratches. No nicks in the blade.
It has planed wood so the blade is not from-the-factory sharp, but it's still pretty great.
Only one available!

The HP-12 Low Angle Smoothing Plane, designed by John Economaki, founder of Bridge City Tool Works, is unlike any other smoother — past or present. The all metal front and rear totes, the symmetrically pierced sides, dual ground irons, a unique blade locking mechanism, and the ability to attach depth skids makes this plane one of the most versatile and usable planes you will ever own.

Breaking Tradition

The tradition of wedging an iron to a metal plane bed with a fulcrum lever has remained unchanged for hundreds of years. Although this retention method works fine, it does constrain the aesthetic possibilities for the plane body. It also makes it difficult to house an iron with dual grinds.

Several years ago, John Economaki, pioneered the use of a unique toggle lock mechanism in shoulder planes and expanded this concept to block planes. This mechanism allows for the sides of the plane body to be pierced (or skeletonized). These openings, designed specifically for your fingers, dramatically improve the ability to cant the iron in minute increments while reducing the overall weight of the plane. The result is a distinctive visual appeal unique to Bridge City Tool Works.

The Totes

Both totes of the HP-12 are metal. History suggests these two components (when made from wood) are the first to degrade, or fail, over time—typically rendering the tool to an uncertain and often unusable fate.

The front tote “mushroom” is turned from aluminum, bead blasted and anodized black. This shape is more hand friendly than the more common “balloon” totes. This tote is threaded into the throat plate allowing for precise adjustment of the mouth.

The rear tote is investment cast 304 stainless steel with the interior cavities painted black. Shaped to invoke the illusion of movement. The highly polished curved surfaces add a nice reflective contrast to the colors of the plane components. The gradated chamfer at the top of the tote ties in nicely with the graceful chamfers of the plane body. The angle of the tote is perpendicular to the iron edge directing the forward motion of the plane straight at the cutting edge. Both the rear and front totes will fit hands both large and small.

The Body

The symmetrical HP-12 plane body features an adjustable mouth also made from 304 stainless-steel. The body, twelve inches long (304.8 mm) heel to toe, features a twelve-degree bed, with all profiles CNC milled. The sides are CNC milled from 360 aluminum, anodized. Each side is press-fit to the sole with dowel pins and retained with cap screws. We are hopeful these material decisions will allow this plane to serve its owners for several hundred years.

The Blade Retaining System

Simply pull the sculpted “D” lever and the entire blade retention mechanism swings out of the way to facilitate iron removal. It is fast, fun, the pressure is adjustable, and you have never seen anything like it. There are no free parts—the mechanism is integrated into the body.

The Irons

The unique design of the HP-12 Low Angle Smoother allows for dual ground irons. Two irons are included for a total of four distinctly different grind angles. With the plane bed milled to twelve degrees, the following three attack angles are possible; 42, 47 and 60 degrees. Also included is a scrub grind, designed to be used for quick cross grain flattening of wavy or difficult grained stock. This plane, with these attack angle choices, may be the only smoothing plane you will ever use or need.

The robust irons (0.225"/5.7 mm thick) are a full two inches wide (50.8 mm) and are hardened to Rc 60-62 from A2 tool steel. They are lapped to a mirror finish—no flattening required.

When bedded, the non-business edge is protected with an aluminum blade guard. This guard is mandatory when sharpening to avoid injury. The guard attaches to the iron with rare earth magnets.

the Iron Depth Adjuster

The iron is engaged to the depth adjustor via a pin nut attached to a 0.5mm thread pitch lead screw. One full revolution of the lead screw increases the depth of cut by .1mm (0.004"). The lead screw is housed in a split pivot nut turned from solid brass and the result is a backlash free mechanism that is field adjustable by hand. This mechanism is as smooth as butter in use. Blade canting can be achieved by shifting the lead screw side to side but in practice this is not as preferable, or as fast, as canting with the fingers through the sides of the plane body.

Depth Skids

The single distinguishing feature of the HP-12 over any other plane made today is the ability to add depth skids; essentially turning your plane into a 2" thickness planer.

The ability to thickness plane to a precise thickness is an incredible benefit for box makers, for making louvers, models, musical instrument makers, inlay strips…and the list goes on.

To set the skids, you can use shop made shims or, as is our preference, pin gages. It is entirely possible, and easy, to make multiple components with a thickness that does not vary more than 0.003"!

The skids feature rounded soles which not only reduce friction but allow you to set them at different depths for creating tapered stock (louvers). Either straight or tapered, you cut until the plane no longer makes a shaving—it is fun and the accuracy is amazing. No sanding makes it even better.

  • Sole Length: 12" (304mm)
  • Sole Width: 2-3/4" (70mm)
  • A2 Iron Width: 2" (51mm)
  • Iron Thickness: 7/32" (5.7mm)
  • Maximum Thickness Planing Capacity: 1-3/4" (45mm)
  • Main Body Size: 12" x 2-3/4" x 5-1/4" (304 x 70 x 133mm)
  • Weight: 1.35 lbs (0.611kg)
  • Weight with Depth Skids = 4.80 lbs (2.175 kg)


HP-12 and HP-9v2 Planes from Bridge City Tools

Product Warnings


This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please read our Proposition 65 warning.
For more information, see

Related Products

Highland Woodworking Social Media
Shopping Cart
Your cart is empty.

Fine Woodworking Magazine Archive 1975-2019
SAVE 50% on the
Fine Woodworking Archive
while supplies last!

Woodworking Tool Catalog
FLIP thru our latest Woodworking Tool Catalog
The Highland Woodworker TV Show
Watch the Highland Woodworker TV Show

Woodworking Gift Certificate
Woodworking Tool Clearance

Search Shopping Lists
Enter name to search for wish list