{"title":"Clifton Hand Planes","description":"\u003cdiv\u003e\n\u003c\/div\u003e\n\n\n\n\n","products":[{"product_id":"cliftonno3smoothplane","title":"Clifton No. 3 Smooth Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton No. 3 Smooth Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Clifton Bench Planes are highly attractive and functional tools that aim to give you an accurate and smooth finish. Ideal for the\n cabinet maker and discerning woodworker, both amateur and professional. These planes are ready to use from the box and do not need hours\n of flattening and fettling to make them fit for use (though we appreciate many woodworkers will prefer to hone the cutting iron themselves.)\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Clifton Bench Planes are made from the finest materials: the body and frog are made from accurately machined grey cast iron with their\n sides and sole fully ground. The walnut knob and handle are carefully shaped and sanded. The cutting iron is made from\n cryogenically treated 01 steel, hardened and tempered to 60-62 Rockwell C the precision ground and are 0.120″ thick (3mm). The Cap Iron\n has a single piece design to offer rigid clamping. The Frog locating pins and screws are made from ground stainless steel and are polished.\n The lever cap is made from grey iron casting polished. Both the screws and adjusting wheel are made from polished brass. The Y Lever is a\n solid one piece brass casting. The Adjusting Lever and some other components are made from polished stainless steel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The frog and frog seating in the body of these planes are based on the BEDROCK design, first seen on early Stanley planes, meaning the seating\n pad in the body is full face, fully machined to mate with an equivalent full face, fully machined underside of the Frog. This ensures absolute\n stability of the Frog, providing a firm and solid surface for the cutting iron, this again rests on a fully machined upper side of the Frog.\n When allied to the extra thick Clifton cutting iron and Clifton cap iron. This design has probably the most rigid and effective clamping\n mechanism of any Bench plane available.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The accuracy of this mechanism allows for the cutting iron to be advanced to give a virtually “zero” mouth opening, so allowing the finest\n shavings to be taken even on the most difficult of timbers. The BEDROCK design uniquely allows the mouth width to be adjusted without\n dismantling the Frog and iron assembly. To adjust the mouth width, the Frog should be moved backwards or forwards as required. To do\n this, loosen the outside two of the three screws located at the back of the Frog seating pad (underneath the adjusting wheel), then\n turn the central screw clockwise to close the mouth and anti-clockwise to open the mouth.\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\n\nThe Clifton No. 3 Smoothing Plane:\n\nThe Clifton Bench Planes are both highly attractive and functional tool that aim to give you an accurate and smooth finish. Ideal for the\n cabinet maker and discerning woodworker, both amateur and professional. These planes are ready to use from the box and do not need hours\n of flattening and fettling to make them fit for use (though we appreciate many woodworkers will prefer to hone the cutting iron themselves.)\n\nThe Clifton Bench Planes are made from the finest materials: the body and frog are made from accurately machined grey cast iron with their\n sides and sole fully ground. The Knob and handle are carefully shaped, sanded and sealed from Walnut. The Cutting Iron is made from\n cryogenically treated 01 steel, hardened and tempered to 60-62 Rockwell C the precision ground and are 0.120″ thick (3mm). The Cap Iron\n has a single piece design to offer rigid clamping. The Frog locating pins and screws are made from ground stainless steel and are polished.\n The Lever Cap are made from grey iron casting polished. Both the Screws and Adjusting Wheel are made from polished brass. The Y Lever is a\n solid one piece brass casting. The Adjusting Lever and some other components are made from polished stainless steel.\n\nThe frog and frog seating in the body of these planes are based on the BEDROCK design, first seen on early Stanley planes, meaning the seating\n pad in the body is full face, fully machined to mate with an equivalent full face, fully machined underside of the Frog. This ensures absolute\n stability of the Frog, providing a firm and solid surface for the cutting iron, this again rests on a fully machined upper side of the Frog.\n When allied to the extra thick Clifton cutting iron and Clifton cap iron. This design has probably the most rigid and effective clamping\n mechanism of any Bench plane available.\n\nThe accuracy of this mechanism allows for the cutting iron to be advanced to give a virtually “zero” mouth opening, so allowing the finest\n shavings to be taken even on the most difficult of timbers. The BEDROCK design uniquely allows the mouth width to be adjusted without\n dismantling the Frog and iron assembly. To adjust the mouth width, the Frog should be moved backwards or forwards as required. To do\n this, loosen the outside two of the three screws located at the back of the Frog seating pad (underneath the adjusting wheel), then\n turn the central screw clockwise to close the mouth and anti-clockwise to open the mouth.\n\nClifton Plane No. 3 has a cutter width of 1 .3\/4″ (44mm) and is used for smoothing.\n\n\nold copy\n\n\u003cp\u003eComparing Clifton bench planes to ordinary planes is akin to comparing a Mercedes to a Metro:  they both get you there,\n but along the way you're going to experience radical differences in solidity, control, comfort and performance.  You'll feel\n exactly that kind of difference the first time you put a Clifton plane to work.  The weight of the casting, the quality of\n its finish, the rigidity of the iron and chipbreaker assembly and the precision with which they are controlled makes for\n extraordinary planing performance.  Clifton's adoption of Stanley's Bed Rock design, together with real improvements in\n both the iron and the chipbreaker design, lets you adjust the planes' throat opening from wide open for heavy work to a\n gap of mere thousandths of an inch for the finest possible finishing, all with no loss of stability or control.\u003c\/p\u003e\n\n\u003cp\u003eThe seat for the frog is a solid surface milled flat and true all the way to a virtual knife-edge at the rear of the\n throat opening.  The frog itself, precision machined to match the seat, can be loosened, adjusted and retightened without\n removing the lever cap \u0026amp; iron assembly. Clifton's superb plane iron is a full 1\/8\" thick, hardened to ~Rc60 for superb\n edge retention and amazingly stable performance. Easily as heavy as the iron itself, Clifton's 2-piece chipbreaker lies flat\n on the back of the iron, distributing pressure all the way along its length and eliminating vibration between iron and frog.\n Clifton irons and 2-piece chipbreakers can upgrade any Bailey-pattern plane.\u003c\/p\u003e\n\n\u003cp\u003eAs specified in the original Bed Rock design, Clifton's castings are considerably heavier than ordinary planes (1\/4 to 1\/2 lb.\n more than comparable models), and machining is carried out to a higher standard.  Soles are flat \u0026 polished, and sides are square\n and likewise ground very fine.  In a bow to Leonard Bailey's inspired design, Clifton has retained the lovely full curve of the\n side rails, just as Stanley did on their earliest Bed Rock planes.  Top edges of the rails, and front \u0026 rear edges and bosses as\n well, have been gently rounded and buffed to a mirror gloss.  Lever cap lever \u0026 screw are polished brass\u0026mdash;accents as tasteful\n as they are beautiful.  In another distinctive touch, handles \u0026amp; knobs are nicely finished Bubinga.  We're proud to add these\n outstanding planes to our collection.\u003c\/p\u003e\n\n\u003cp\u003e(\u003ca href=\"http:\/\/www.tools-for-woodworking.com\/index.asp?PageAction=VIEWPROD\u0026ProdID=600\"\u003eClick here for replacement iron.\u003c\/a\u003e)\u003c\/p\u003e\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478088986,"sku":"431303","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431303-01D.jpg?v=1768338463"},{"product_id":"cliftonno400rabbetplane","title":"Clifton No. 400 Shoulder Plane","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   The 400 Shoulder Rebate Plane has a fine mouth for cabinetmakers and those more demanding woodworkers\n wanting fine shavings in their precision work. The body is machined from quality grey iron casting, accurately machined and precision ground on the sole\n and the sides. The cutting iron seats smoothly onto machined pads and fits snugly into the body of the plane and held in by a Walnut wedge. Adjustment of\n the cutting iron is done in the traditional manner by tapping the end of the cutting iron and locking the wedge in place. The finish is Bright Ground.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Cutter width  - 7\/16\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Cutter steel - oil hardened tool steel, Rockwell C Hardness 59-61\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Bevel - Primary 25°, secondary 30°\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Plane length - 3-1\/8\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight - .16kg (.34lbs)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Made in Sheffield, England\n  \u003c\/p\u003e\n\n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478154522,"sku":"431161","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431161-01d.jpg?v=1768338452"},{"product_id":"clifton400rabbetplanereplacementiron","title":"Clifton 400 Shoulder Plane Replacement Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton 400 Shoulder Plane Replacement Iron\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement iron for the\n   \u003ca data-prev-url=\"\/cliftonno400rabbetplane.aspx\" href=\"\/products\/cliftonno400rabbetplane\"\u003e\n    Clifton 400 Shoulder Plane\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478220058,"sku":"431162","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431162-01d.jpg?v=1768338456"},{"product_id":"cliftonno410rabbetplane","title":"Clifton No. 410 Shoulder Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton No. 410 Rabbet Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Clifton 410 Shoulder Rebate Plane fills the need for a narrow light and accurate shoulder plane. The body is machined from quality grey\n iron casting and precision ground on the sole and the sides. The lever arm is made of unbreakable malleable iron and fits snugly into the\n body of the plane. The cutting iron fits smoothly onto the machined pads in the body and can be finely adjusted by means of a screw. The\n finish is Bright Ground.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Cutter width  - 11\/16\" (18mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Cutter steel - oil hardened tool steel, Rockwell C Hardness 59-61\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Bevel - Primary 25\u0026amp;deg, secondary 30°\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Plane length - 5-1\/2\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight - .58kg (1.25lbs)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Made in Sheffield, England\n  \u003c\/p\u003e\n  \u003c!--\n\nmfg propaganda\n\nThe Clifton 410 Shoulder Rebate Plane fills the need for a narrow light and accurate shoulder plane. The body is machined from quality grey\n iron casting and precision ground on the sole and the sides. The lever arm is made of unbreakable malleable iron and fits snugly into the\n body of the plane. The cutting iron fits smoothly onto the machined pads in the body and can be finely adjusted by means of a screw. The\n finish is Bright Ground.\n\nSpecification:\nCutter: 11\/16″ (18mm) wide – High Quality Oil Hardened Tool Steel, 59-61 Rockwell “C” Hardness, cutting edge ground to 25 deg. Primary and 30 deg. Secondary.\nLength: 5.1\/2″ (138mm)\nApprox. Weight: 1.1\/4″lbs (0.58kg)\n\nold copy\n\n\u003cp\u003eClifton Tooling continues to create some of the finest steel rabbeting planes available.  These finely crafted tools feature carefully\n machined and polished castings with very narrow throat openings for absolutely minimal tearout.  Though these planes are likely to become\n even more valuable as collectors' items, their functional beauty will earn them a place in many a well-equipped hand tool shop.\u003c\/p\u003e\n\n\u003cp\u003eModel 410's sole is 5-3\/8\" long by 11\/16\" wide. It has a depth of cut adjustment screw and steel lever cap\/handle.\u003c\/p\u003e\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478285594,"sku":"431126","price":316.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431126-01d.jpg?v=1768338440"},{"product_id":"clifton410rabbetplanereplacementiron","title":"Clifton 410 Shoulder Plane Replacement Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton 410 Shoulder Plane Replacement Iron\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement iron for the\n   \u003ca data-prev-url=\"\/cliftonno410rabbetplane.aspx\" href=\"\/products\/cliftonno410rabbetplane\"\u003e\n    Clifton 410 Rabbet Plane\n   \u003c\/a\u003e\n   . Made from 01 Steel, hardened to 62 rockwell C and cryogenically treated.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Sheffield, England.\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\n\nClifton 410 Spare Cutter for the 410 Shoulder Rebate Plane. Made from 01 Steel, hardened to 62 rockwell C and cryogenically treated.\n\nMade in Sheffield.\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478351130,"sku":"431127","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431127-01d.jpg?v=1768338454"},{"product_id":"cliftonno420rabbetplane","title":"Clifton No. 420 Shoulder Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton No. 420 Shoulder Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Clifton 420 Shoulder Rebate Plane fills the need for a light accurate shoulder plane. The body is machined from quality grey iron\n casting and is precision ground on the sole and the sides. The lever arm in made of unbreakable malleable iron and fits snugly into the\n body of the plane. The cutting iron fits smoothly onto the machined pads in the body and can be adjusted by means of a screw.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Cutter width  - 3\/4\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Cutter steel - oil hardened tool steel, Rockwell C Hardness 59-61\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Bevel - Primary 25\u0026amp;deg, secondary 30°\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Plane length - 8\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight - 1.1kg (2.5lbs)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Made in Sheffield, England\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\n\nThe Clifton 420 Shoulder Rebate Plane fills the need for a light accurate shoulder plane. The body is machined from quality grey iron\n casting and is precision ground on the sole and the sides. The lever arm in made of unbreakable malleable iron and fits snugly into the\n body of the plant. The cutting iron fits smoothly onto the machined pads in the body and can be adjusted by means of a screw.\n\nSpecification:\nCutter: ¾” (19mm) wide – High Quality Oil Hardened Tool Steel, 59-61 Rockwell “C” Hardness, cutting edge ground to 25 deg. Primary and 30 deg. Secondary.\nLength: 8″ (200mm)\nApprox. Weight: 2\/1\/2″ (1.1kg)\n\nold copy\n\n\u003cp\u003eClifton Tooling continues to create some of the finest steel rabbeting planes available.  These finely crafted tools feature carefully machined and polished castings with very narrow throat openings\n for absolutely minimal tearout.  Though these planes are likely to become even more valuable as collectors' items, their functional beauty will earn them a place in many a well-equipped hand tool shop.\u003c\/p\u003e\n \n\u003cp\u003eModel 420 is 3\/4\u0026quot; wide by 8\u0026quot; long. It has a depth of cut adjustment screw and steel lever cap\/handle.\u003c\/p\u003e\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478416666,"sku":"431128","price":335.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431128-01d.jpg?v=1768338457"},{"product_id":"clifton420rabbetplanereplacementiron","title":"Clifton 420 Shoulder Plane Replacement Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton 420 Shoulder Plane Replacement Iron\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement iron for the\n   \u003ca data-prev-url=\"\/cliftonno420rabbetplane.aspx\" href=\"\/products\/cliftonno420rabbetplane\"\u003e\n    Clifton 420 Shoulder Plane\n   \u003c\/a\u003e\n   . Made from 01 steel hardened to 62 rockwell C and cryogenically treated.\n  \u003c\/p\u003e\n  \u003c!--\n\nmfg propaganda\n\nClifton 420 Spare Cutter for the Shoulder Plane. Made from 01 steel hardened to 62 rockwell C and cryogenically treated.\n\nMade in Sheffield.\n\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478482202,"sku":"431129","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431129-01d.jpg?v=1768338458"},{"product_id":"clifton3-in-1shoulderrabbetplane","title":"Clifton 3-in-1 Shoulder Rabbet Plane Model 3110","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton 3-in-1 Shoulder Rabbet Plane Model 3110\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Clifton 3110 Plane is an extremely versatile tool combining the features of shoulder rebate, chisel plane and adjustable mouth bull-nose plane.\n As a shoulder plane, the front extension piece is fitted as a chisel plane all nose pieces are removed; and as a bull-nose plane, the thinner nose\n piece is fitted in conjunction with one or both of the precision machined steel shims  to make the mouth size bigger (1\/32″ and 1\/64″) – or for\n very fine work, without either shim.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 3-in-1 plane is designed to perform the functions of three:  it can be used as a conventional rabbet plane (on rabbets up to 1-1\/8\" wide),\n as a bullnose plane for working close into flush corners, or as a chisel plane for working right up to an adjacent surface.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The body is machined from a quality grey iron casting and precision ground on the sole and sides. The lever arm is also of grey iron. The cutting\n iron fits smoothly onto the machined pads in the body and can be adjusted by means of the screw. Bright Ground finish.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Cutter width  - 1-1\/8\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Cutter steel - oil hardened tool steel, Rockwell C Hardness 59-61\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Bevel - Primary 25\u0026amp;deg, secondary 30°\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Plane length - 6\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight - .9kg (2 lbs)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Made in Sheffield, England\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\n\nThe Clifton 3110 Plane is an extremely versatile tool combining the features of shoulder rebate, chisel plane and adjustable mouth bull-nose plane.\n As a shoulder plane, the front extension piece is fitted as a chisel plane all nose pieces are removed; and as a bull-nose plane, the thinner nose\n piece is fitted in conjunction with one or both of the precision machined steel shims  to make the mouth size bigger (1\/32″ and 1\/64″) – or for\n very fine work, without either shim.\n\nThe body is machined from a quality grey iron casting and precision ground on the sole and sides. The lever arm is also of grey iron. The cutting\n iron fits smoothly onto the machined pads in the body and can be adjusted by means of the screw. Bright Ground finish.\n\nSpecification:\nCutter: 1.1\/8″ (29mm) wide – High Quality Oil Hardened Tool Steel, 59-61 Rockwell “C” Hardness, cutting edge ground to 25 deg. Primary and 30 deg. Secondary.\nLength: 6″ (152mm)\nApprox. Weight: 2lbs (0.9kg)\n\nold copy\n\u003cp\u003eClifton Tooling continues to create some of the finest steel rabbeting planes available. These finely crafted tools feature carefully machined\n and polished castings with very narrow throat openings for absolutely minimal tearout.  Though these planes are likely to become even more valuable\n as collectors' items, their functional beauty will earn them a place in many a well-equipped hand tool shop.\u003c\/p\u003e\n\n\u003cp\u003eThis popular plane is designed to perform the functions of three:  it can be used as a conventional rabbet plane (on rabbets up to 1-1\/8\" wide),\n as a bullnose plane for working close into flush corners, or as a chisel plane for working right up to an adjacent surface.\u003c\/p\u003e\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478547738,"sku":"431124","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431124-01d.jpg?v=1768338460"},{"product_id":"clifton3-in-1shoulderrabbetplanereplacementiron","title":"Blade for Clifton 3110 \u0026 770 Planes","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Blade for Clifton 3110 \u0026amp; 770 Planes\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement blade for\n   \u003ca data-prev-url=\"\/clifton3-in-1shoulderrabbetplane.aspx\" href=\"\/products\/clifton3-in-1shoulderrabbetplane\"\u003e\n    Clifton 3-in-1 3110 Shoulder Rabbet Plane\n   \u003c\/a\u003e\n   \u0026amp;\n   \u003ca data-prev-url=\"\/clifton-770-bullnose-plane.aspx\" href=\"\/products\/clifton-770-bullnose-plane\"\u003e\n    Clifton 770 Bullnose Plane\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003cp\u003e\n   1-1\/8\" wide.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478613274,"sku":"431125","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431125-01d.jpg?v=1768338460"},{"product_id":"clifton-770-bullnose-plane","title":"Clifton 770 Bullnose Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton 770 Bull Nose Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Clifton 770 Bull Nose plane is made to the exacting specifications as all the other Clifton planes,\n this will certainly be a great purchase for those who want a quality bullnose plane. The 770 fulfills the\n need for a straight-forward bull nose plane enabling the user to plane close to an abutting section of\n wood and avoiding tear-out. It is a light handy plane often used for cutting rebate stop shoulders. The\n body is machined from quality grey iron castings and is precision ground on the sole and sides. The lever\n arm is also made of grey iron. The cutting iron fits smoothly onto the machined pad in the body and can be\n finely adjusted by means of the screw. The finish is bright ground and all edges have been rounded over to\n fit comfortably in the hand.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Cutter width  - 1-1\/8\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Cutter steel - oil hardened tool steel, Rockwell C Hardness 59-61\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Bevel - Primary 25\u0026amp;deg, secondary 30°\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Plane length - 4\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight - .65kg (1.7lbs)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Made in Sheffield, England\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\n\nThe Clifton 770 Bull Nose plane is made to the exacting specifications as all the other Clifton planes, this\n will certainly be a great purchase for those who want a quality bullnose plane. The 770 fulfills the need\n for a straight-forward bull nose plane enabling the user to plane close to an abutting section of wood and\n avoiding tear-out. It is a light handy plane often used for cutting rebate stop shoulders. The body is\n machined from quality grey iron castings and is precision ground on the sole and sides. The lever arm is\n also made of grey iron. The cutting iron fits smoothly onto the machined pad in the body and can be finely\n adjusted by means of the screw. The finish is bright ground and all edges have been rounded over to fit\n comfortably in the hand.\n\nThis plane has a cutter width of 1 1\/8″ (29mm) and is made from high quality oil hardened tool steel, 59-61\n rockwell “C” hardness. The cutting edge is ground to 25 degrees primary and 30 degrees secondary.\n\nLength – 4″ (100mm)\nApprox. weight 1.7Ibs (.650kgs)\n\nMade in Sheffield\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50822109462810,"sku":"171925","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/171925-01d.jpg?v=1768343563"},{"product_id":"clifton-o1-cryo-plane-iron","title":"Clifton O1 Cryo Plane Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton O1 Cryo Plane Iron\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Clifton Bench Plane cutting irons are made from 01 steel that is now cryogenically treated. This cutting iron has a hardness of\n 60 to 62 Rockwell C hardness and the new cryogenic treatment means these blades will hold their edge for longer. This ensures that\n Clifton blades take an edge better than most other blades and hold it for a longer period of time.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   These blades are 3.6mm thick and so give it increased rigidity. They are then accurately ground, embossed with the brand name\n and then individually checked for hardness. Wiped with oil after use to protect from rust and finger marks, these blades will\n serve you some excellent planing work.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Fit\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   Clifton irons fit most common Bailey-pattern planes - Clifton, Stanley, Record and other brands\n  \u003c\/p\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    1-3\/4\" width (45mm) - fits #3 planes\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2\" width (50mm) - fits #4 \u0026amp; 5 planes\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2-3\/8\" width (60mm) - fits #4-1\/2, 5-1\/2, 6 \u0026amp; 7 planes\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003c!--\u003cp\u003eMade in Sheffield, England\u003c\/p\u003e--\u003e\n  \u003c!--\n\nmfg propaganda\n\nThe Clifton Bench Plane cutting irons are made from 01 steel that is now cryogenically treated. This cutting iron has a hardness of\n 60 to 62 Rockwell C hardness and the new cryogenic treatment means these blades will hold their edge for longer. This ensures that\n Clifton blades take an edge better than most other blades and hold it for a longer period of time. These blades are 3.6mm thick and\n so give it increased rigidity. They are then accurately ground, embossed with the brand name and then individually checked for\n hardness. Wiped with oil after use to protect from rust and finger marks, these blades will serve you some excellent planing work.\n\nAvailable in 3 sizes to fit your particular plane:\n\nPlane No. 3 – Size needed: 1 3\/4″ (45mm)\nPlane No. 4 \u0026 5 – Size needed: 2″ (50mm)\nPlane No. 4 1\/2, 5 1\/2, 6 \u0026 7 – Size needed: 2 3\/8″ (60mm)\n\n** Please note, we cannot accept returns on items honed\/sharpened after purchase. Returns are only on un-used items and items with manufacturing faults as per our terms and conditions **\n\n\n\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"1-3\/4 inch","offer_id":50822109626650,"sku":"171951","price":85.0,"currency_code":"USD","in_stock":true},{"title":"2 inch","offer_id":50822109659418,"sku":"171952","price":85.0,"currency_code":"USD","in_stock":true},{"title":"2-3\/8 inch","offer_id":50822109692186,"sku":"171953","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/clifton-cryogenic-bench-plane-blade-d.jpg?v=1768343563"}],"url":"https:\/\/www.highlandwoodworking.com\/collections\/clifton-hand-planes.oembed?page=2","provider":"Highland Woodworking","version":"1.0","type":"link"}