{"title":"Dovetail Saws \u0026 Carcass Saws","description":"\u003cdiv\u003e\n\u003cp\u003eAll Dovetail, Carcass and Gent Saws are types of backsaws, smaller than Tenon Saws, designed for specific joinery tasks. We offer a variety of these joinery saws, with both classic pistol grip or straight handles, that will fit a range of budgets.\u003c\/p\u003e\n\u003cp\u003e Dovetail Saws are generally designed with rip tooth sets, for cutting along the grain, as when cutting dovetail pins. Carcass Saws, with cross-cut sets, perform other general joinery work requiring cuts across the grain. Gent saws are typically shorter and smaller, available with cross-cut or rip sets for small-scale model work and fine dovetail joinery.\u003c\/p\u003e\n\u003cp\u003eHand cutting dovetails is probably the most feared and revered among joinery tasks, with many convinced there's no time to master the skill. Dovetails joints can be traced back to Egyptian times, so learning to hand cut dovetails with the fine dovetail saws available today should be a cinch!\u003c\/p\u003e\n\u003c\/div\u003e\n","products":[{"product_id":"lie-nielsencarcasssawmaple","title":"Lie-Nielsen Carcass Saw","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lie-Nielsen Carcass Saw\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Modeled on 19th century joinery saws, these are among the best you can buy for dovetailing \u0026amp; carcass joinery.\n Beveled brass backs lend perfect heft and stiffness, so they cut with virtually no added pressure from you.\n   \u003c!-- Generously proportioned handles are made from curly maple.--\u003e\n   The Carcass Saw blade is 0.020\" thick with a 14 ppi\n (crosscut) tooth and a very fine .003\" set per side. Usable blade is 14\" long by 2-1\/4\" to the brass\n back. Overall it's 19\" long by 4-7\/8\" high. Each saw comes with use and maintenance tips.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821484282138,"sku":"134370","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/459002d.jpg?v=1768339977"},{"product_id":"8straightdovetailsaw","title":"Crown Straight Dovetail Saw - 8 inch","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   This 8 inch Dovetail saw by Crown Tools of Sheffield is made for small scale general joinery work.  Teeth are filed crosscut, yet still work reasonably well for dovetail work, compared to other inexpensive saws we've seen.\n   \u003c!--Choose the 10 inch saw for general use; 8 inch \u0026#38; 6 inch sizes for small-scale work commensurate with their size.--\u003e\n   Blades are 16 tpi, 1-1\/2 inches deep to the brass back.  Exceptionally comfortable handles are dark-stained beechwood with brass ferrule.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Crown Hand Tools","offers":[{"title":"Default Title","offer_id":50821484347674,"sku":"431167","price":39.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431167d.jpg?v=1768339976"},{"product_id":"10straightdovetailsaw","title":"Crown Straight Dovetail Saw - 10 inch","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   This Dovetail Saw by Crown Tools of Sheffield is made for joinery work.\n Teeth are filed crosscut, yet still work reasonably well for dovetail work, compared to other inexpensive saws we've seen.\n   \u003c!--Choose the 10 inch saw for general use; 8 inch \u0026#38; 6 inch sizes for small-scale work commensurate with their size.--\u003e\n   Blades are 17 tpi, 1-1\/2 inches deep to the brass back.  Exceptionally comfortable handles are dark-stained beechwood with\n brass ferrule.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Crown Hand Tools","offers":[{"title":"Default Title","offer_id":50821484413210,"sku":"431168","price":41.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431168d.jpg?v=1768339977"},{"product_id":"8britishdovetailsaw","title":"Lynx British Dovetail Saw - 8 inch","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lynx British Dovetail Saw - 8 inch\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Thomas Flinn \u0026amp; Company's handsome Lynx dovetail saws made with alloy spring steel are held straight and rigid with a solid brass backer spine. Classic shaped, full-sized beech handles are a luxurious deep mahogany tone and accented with brass plated screw buttons. Teeth are filed for rip cutting, for clean and efficient cutting of dovetails. The 8\" saw has 20 tpi,\na depth of cut 2-1\/4\" and OAL of 13\". Made in Sheffield, England.\n  \u003c\/p\u003e\n  \u003c!--\n\nThe Lynx Dovetail with Beech is also made with the same ideals as the Handsaw and Tenon Saw with Beech handle and will provide excellent dovetailing results.\n Made using alloy spring steel with a brass back and brass plated screws fitted in the steamed beech handle. Individually packed in a wallet.\nAvaliable in either rip tooth (for cutting with the grain) and in crosscut tooth (for cutting across the grain).\n\nBlade depth is 2 1\/4\"\n\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821484577050,"sku":"456309","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/456309d.jpg?v=1768339978"},{"product_id":"japanesedovetailsaw","title":"Japanese Dovetail Saw","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Japanese Dovetail Saw\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Master craftsman Toshio Odate designed this 19\" Japanese Dovetail Saw specifically for cutting dovetails in hard wood, though it works equally well for softer woods and other kinds of fine joints.  This Dovetail Saw is a Kaeba saw, meaning \"changing blade\". It has a\n   \u003ca data-prev-url=\"\/japanesedovetailsawreplacementblade.aspx\" href=\"\/products\/japanesedovetailsawreplacementblade\" target=\"_blank\"\u003e\n    \u003cb\u003e\n     replaceable blade\n    \u003c\/b\u003e\n   \u003c\/a\u003e\n   with a steel stiffening back. The blade's cutting length is 7 inches, enough for an efficient stroke without drawing the hand too far from the work.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The blade has 23 tpi for extremely fine and smooth cuts.  Kerf width is a scant 1\/64th of an inch.  Blade height (depth of cut) tapers along the length of the blade.  At the heel of the blade it's 1-1\/2″ and at the toe 2″.  Lightweight wood handle is wrapped in rattan providing strength and a textured grip.  This saw cuts on the pull stroke.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The teeth on the blade can be re-sharpened with a file (or you can simply replace the blade when needed).\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Ikedame","offers":[{"title":"Default Title","offer_id":50821486149914,"sku":"456423","price":52.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/056423.jpg?v=1751675227"},{"product_id":"japanesedovetailsawreplacementblade","title":"Japanese Dovetail Saw Replacement Blade","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Japanese Dovetail Saw Replacement Blade\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement blade for our\n   \u003ca data-prev-url=\"\/japanesedovetailsaw.aspx\" href=\"\/products\/japanesedovetailsaw\" target=\"_blank\"\u003e\n    \u003cb\u003e\n     Japanese Dovetail Saw\n    \u003c\/b\u003e\n   \u003c\/a\u003e\n   designed by Toshio Odate.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Cutting length of blade is 7 inches.  23 teeth per inch.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Ikedame","offers":[{"title":"Default Title","offer_id":50821486215450,"sku":"456424","price":26.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/456424_v1d.jpg?v=1768339985"},{"product_id":"bahco1013tpiprofcutdovetailsaw","title":"Bahco 10 inch 13tpi ProfCut Dovetail Saw","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Bahco 10 inch 13tpi ProfCut Dovetail Saw\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   10\" Special-purpose dovetail saw for wood and plastic materials. Fine universal toothing with hardpoint teeth and light steel back for rigidity.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Blade Length — 250mm (~9-3\/4\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Blade Thickness — 0.5mm (0.19\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Kerf — 0.8mm (0.31\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Maximum Depth of Cut — 42mm (~1-5\/8\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Overall Blade Height — 60mm (~2-3\/8\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Overall Length \u0026amp;dash; 357mm (~14\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Tooth count — 15tpi, 16ppi\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   Features\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    For cutting wood and plastic materials\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Ideal for cutting plywood, laminates, timber, plastics, plaster\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Universal teething, hardpoint teeth for long lasting sharpness\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Light steel back for rigidity\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Straight wooden handle to allow flush cutting\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Wooden handle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Universal toothing, hardpoint teeth for long lasting sharpness\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Made in Sweden\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \n\u003c\/body\u003e","brand":"Bahco","offers":[{"title":"Default Title","offer_id":50821524881690,"sku":"451506","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/451506-01d.jpg?v=1768340281"},{"product_id":"veritas-dovetail-saw","title":"Veritas Dovetail \u0026 Small Crosscut Saws","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Dovetail \u0026amp; Small Crosscut Saws\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Veritas has merged modern materials and traditional design to create these well balanced, excellent cutting joinery saws. The 9-1\/4” blade is made of high-carbon steel and has a spine of high-pressure injection molded resin. The resin backer uses stainless steel powder \u0026amp; glass fibers to keep the blade straight \u0026amp; true. Patterned from antique saws with elegantly curved handles, the saw's hardwood handle nestles into your hand to give you exceptional cutting control. Its smooth cutting makes the Veritas Dovetail Saw another excellent saw for beginners and a versatile addition to any dovetail saw collection. Depth of cut is 1-9\/16\". OAL is 14\".\n  \u003c\/p\u003e\n  \u003cdiv id=\"right\"\u003e\n   \u003cimg alt=\"Veritas Small Saw Tooth\" data-prev-url=\"\/productimages\/handsaws\/veritas\/veritas-small-saws-01-225-250.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/handsaws\/veritas\/veritas-small-saws-01-225-250.jpg\" style=\"width:225px;height:250px;\"\u003e\n  \u003c\/div\u003e\n  \u003ch5\u003e\n   Dovetail Saw\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The standard\n   \u003cstrong\u003e\n    Dovetail Saw\n   \u003c\/strong\u003e\n   has 14 rip cut teeth per inch (TPI) with a 14° rake angle, 0.003\" of set and a 60° included angle. It is best used with stock thicker than 1\/2\".\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Fine Cut Dovetail Saw\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The\n   \u003cstrong\u003e\n    Fine-Cut Dovetail Saw\n   \u003c\/strong\u003e\n   has 20 rip cut teeth per inch (TPI) with a 14° rake angle, 0.003\" of set and a 60° included angle. It is best used with stock 1\/2\" and thinner.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Small Crosscut Saw\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The\n   \u003cstrong\u003e\n    Small Crosscut Saw\n   \u003c\/strong\u003e\n   has 16 teeth per inch (TPI) with a 15° rake \u0026amp; bevel angles and 0.003\" of set. The crosscut pattern teeth have alternating bevel to slice wood fibers cleanly when cutting across the grain. It will cut straighter and leave a much smoother finish in crosscuts than the dovetail saws. Use this saw when cutting tenon shoulders.\n  \u003c\/p\u003e\n  \u003cdiv style=\"text-align:center;\"\u003e\n   \u003cimg alt=\"Veritas Small Saw Tooth Diagram\" data-prev-url=\"\/productimages\/handsaws\/veritas\/veritas-small-saws-03-400-170.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/handsaws\/veritas\/veritas-small-saws-03-400-170.jpg\" style=\"width:400px;height:170px;\"\u003e\n  \u003c\/div\u003e\n  \u003c!--Fine cut\u003cp\u003eVeritas has merged modern materials and traditional design to create this well balanced, excellent cutting dovetail saw. The 9-1\/4\u0026rdquo; high-carbon steel blade has rip configured teeth @ 20 tpi,  with a rake angle of 14 deg (included angle of 60 deg). The blade\u0026#39;s spine is made from high-pressure injected molded resin, with stainless steel powder \u0026 glass fibers resulting in a strong and stiff backer that keeps the blade straight \u0026 true.  Patterned from antique saws with elegantly curved handles, the saw\u0026#39;s solid bubinga handle nestles into your hand to give you exceptional cutting control.  Depth of cut is 1-9\/16\u0026rdquo;. OAL is 14\u0026rdquo;.\u003c\/p\u003e--\u003e\n  \u003c!--Small Crosscut\u003cp\u003eVeritas has merged modern materials and traditional design to create this well balanced, excellent cutting crosscut saw. The 9-1\/4\u0026rdquo; high-carbon steel blade has crosscut configured teeth @ 16 tpi,  with a rake angle of 15 deg (included angle of 60 deg). The blade\u0026#39;s spine is made from high-pressure injected molded resin, with stainless steel powder \u0026 glass fibers resulting in a strong and stiff backer that keeps the blade straight \u0026 true.  Patterned from antique saws with elegantly curved handles, the saw\u0026#39;s solid bubinga handle nestles into your hand to give you exceptional cutting control. Depth of cut is 1-9\/16\u0026rdquo;. OAL is 14\u0026rdquo;.\u003c\/p\u003e--\u003e\n  \u003c!--mfg propaganda Veritas Dovetail SawsFor cuts with the grain, our rip-cut tooth pattern dovetail saws have blades in 14 or 20teeth per inch; the standard 14 tpi model is most efficient with stock thicker than 1\/2,while the less aggressive cut of the 20 tpi fine-tooth version is best for stock under 1\/2thick. Both are 91\/4 long and have 0.020 thick blades. The teeth, set0.003 per side, have a rake angle of 14\u0026deg;, and an included angle of60\u0026deg;. Cut depth is about 19\/16. 141\/4 long overall.Veritas Crosscut SawYou want a crosscut saw whenever cutting across or perpendicular to the grain, suchas when cutting tenon shoulders. A crosscut blade has teeth filed with alternatingbevel angles so it severs rather than tears wood fibers. It tracks better and leaves asmoother finish than would a rip-cut blade used across the grain. The91\/4 long, 0.020 thick blade has 16 teeth per inch, with 0.003 of setper side. The teeth have 15\u0026deg; rake and bevel angles. Cut depth is about1-9\/16\". 14-1\/4\" long overall.Veritas® Joinery SawsOur premium joinery saws are innovative blends oftradition and technology, incorporating critical characteristics of a classic fine joinery saw, yet executed usingmodern production processes and state-of-the-art materials. All share the same platform, with a revolutionaryspine injection molded from a mixture of stainless-steelpowder for weight, glass fiber for stiffness and a polymerresin binder. The high-carbon steel blade and stainlesssteel handle-mounting bolt are molded into the spine,creating a solid blade\/spine\/mount assembly. The sawshave excellent balance, cut easily and true, and have acomfortable hardwood grip that makes the saw feel as ifits an extension of your arm. Patented.--\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Dovetail Saw","offer_id":50821770412314,"sku":"177059","price":99.0,"currency_code":"USD","in_stock":true},{"title":"Dovetail Saw - Fine Cut","offer_id":50821770445082,"sku":"177060","price":99.0,"currency_code":"USD","in_stock":true},{"title":"Small Crosscut Saw","offer_id":50821770477850,"sku":"177061","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/177059.jpg?v=1751682880"},{"product_id":"veritas-crosscut-carcass-saw","title":"Veritas Carcass Saw","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Carcass Saw\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Veritas has merged modern materials and traditional design to create this well balanced, excellent cutting carcass saw. As you can tell from the name, carcass saws are used to cut furniture carcass pieces\n and elements of the framework like joints in drawer runners, dividers, and stretchers. Not quite as beefy as a tenon saw, the Veritas Carcass Saw is scaled for smaller work, yet maneuverable\n enough to cut dovetails. The 11” high-carbon steel blade is mounted in a composite resin spine for stiffness and strength.  The spine incorporates stainless steel powder for weight and glass fiber for strength. \n The elegantly curved hardwood handle fits your hand to give you exceptional cutting control.  Depth of cut is 2-3\/8\". Overall Length is 16-3\/8\".\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Tooth Patterns\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The\n   \u003cstrong\u003e\n    crosscut\n   \u003c\/strong\u003e\n   version of the Veritas Carcass Saw is 14 teeth per in (TPI) with a 15\u0026amp;deg rake angle and a 60° included angle.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The\n   \u003cstrong\u003e\n    rip\n   \u003c\/strong\u003e\n   version of the Veritas Carcass Saw is 12 teeth per in (TPI) with a 10\u0026amp;deg rake angle and a 60° included angle. The teeth are alternately filed at a 15° bevel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n  \u003c\/p\u003e\n  \u003cdiv style=\"text-align:center;\"\u003e\n   \u003cimg data-prev-url=\"\/productimages\/handsaws\/veritas\/veritas-carcass-saw-teeth-508-173.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/handsaws\/veritas\/veritas-carcass-saw-teeth-508-173.jpg\" style=\"width:508px; height:173px;\"\u003e\n  \u003c\/div\u003e\n  \u003c!--\n\n\u003cp\u003eVeritas has merged modern materials and traditional design to create this well balanced, excellent cutting carcass saw. The Veritas Rip Cut Carcass Saw is great for with the grain cuts like cutting tenons,\n yet maneuverable enough to cut large dovetails.The 11\u0026rdquo; high-carbon steel blade has rip configured teeth \u0026#64; 12 tpi,  with a rake angle of 10\u0026deg; (included angle of 60\u0026deg;). The blade\u0026#39;s spine is\n made from high-pressure injected molded resin, with stainless steel powder \u0026amp; glass fibers resulting in a strong and stiff backer that keeps the blade straight \u0026amp; true.  Patterned from antique saws\n with elegantly curved handles, the saw\u0026#39;s solid bubinga handle nestles into your hand to give you exceptional cutting control.  Depth of cut is 2-3\/8\u0026rdquo;. OAL is 16-3\/8\u0026rdquo;.\u003c\/p\u003e\n\n\n--\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Rip Carcass Saw","offer_id":50821831983386,"sku":"177065","price":103.0,"currency_code":"USD","in_stock":true},{"title":"Crosscut Carcass Saw","offer_id":50821832016154,"sku":"177066","price":103.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/177065d.jpg?v=1768341517"},{"product_id":"veritas-gents-saw","title":"Veritas Gent's Saw","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Veritas has merged modern materials and traditional design to create this well balanced, excellent cutting dovetail saw. Originally, the Gent's Saw, or “gentleman's saw”, was designed as a smaller\n version of a typical dovetail saw, making it easy to fit in a toolbox.  The 7-7\/8\" by 1-5\/8\" high-carbon steel blade is just .015\" thick, with .003\" set per side.  The blade's\n spine is made from high-pressure injected molded resin, with stainless steel powder \u0026amp; glass fibers resulting in a strong and stiff backer that keeps the blade straight \u0026amp; true.  Its 4-1\/4\"\n long hardwood handle is attached with a brass nut.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The  crosscut saw has 22tpi with a 15° rake angle, 60° included angle and alternating 15° bevel angles.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The  rip cut saw has 20tpi with a 14° rake angle and 60° included angle.\n  \u003c\/p\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    13-1\/2\" Overall length\n   \u003c\/li\u003e\n   \u003cli\u003e\n    7-7\/8\" Blade Length\n   \u003c\/li\u003e\n   \u003cli\u003e\n    4-1\/4\" Handle Length\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1-5\/8\" Cutting Depth\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Read additional details about Gent Saws and Veritas Gent Saws on the\n   \u003ca data-prev-url=\"\/woodworking-tips-1504apr\/toolreview\/veritas-gents-saw-tool-review.html\" href=\"https:\/\/info.highlandwoodworking.com\/woodworking-tips-1504apr\/toolreview\/veritas-gents-saw-tool-review.html\" target=\"_blank\"\u003e\n    \u003cb\u003e\n     Tool Review\n    \u003c\/b\u003e\n   \u003c\/a\u003e\n   page of our site.\n  \u003c\/p\u003e\n  \u003cbr\u003e\n  \u003cbr\u003e\n  \u003cbr\u003e\n  \u003cdiv style=\"text-align:center;\"\u003e\n   \u003cimg data-prev-url=\"\/ProductImages\/handsaws\/veritas\/veritas-gents-tooth-pattern-550-162.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/handsaws\/veritas\/veritas-gents-tooth-pattern-550-162.jpg\" style=\"width:600px; height:160px;\"\u003e\n  \u003c\/div\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Rip Cut - 20tpi","offer_id":50821840830746,"sku":"177072","price":69.0,"currency_code":"USD","in_stock":true},{"title":"Crosscut - 22tpi","offer_id":50821840863514,"sku":"177073","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/17707d.jpg?v=1768341598"},{"product_id":"lie-nielsen-tapered-saws","title":"Lie-Nielsen Tapered Saws","description":"\u003cp\u003eLie-Nielsen's Tapered Saws combine all of the best features they've developed in their other backsaws over the years. They use thin plates for fast, precise cuts with less effort. The tapered blade helps eliminate the frustration of cutting through your depth line on the back of the workpiece. When you reach the depth line on the front of your workpiece the tip of the saw should be above the line on the back.\u003c\/p\u003e\n\u003cp\u003eLie-Nielsen uses only the best materials and manufactures every part of their saws in-house. The polished Swedish steel blade is cut, set and mounted in a solid brass milled back. The completed blade is fitted with a beautiful handle. Finally, each saw is filed by hand and tested. All of this happens in one room at the Lie-Nielsen factory. We snapped pictures of the \u003ca data-prev-url=\"http:\/\/highlandwoodworking.com\/blasts2013\/LNfactorytour.html#saws\" href=\"https:\/\/info.highlandwoodworking.com\/blasts2013\/LNfactorytour.html\" title=\"Tapered Backsaws in production\"\u003e Tapered Backsaws in production\u003c\/a\u003e on one of our trips to the Lie-Nielsen factory. Regardless of which tapered backsaw you select, you can be confident with Lie Nielsen's lifetime guarantee against defects in materials or workmanship.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e The Dovetail Saw \u003c\/strong\u003e is based on a British saw made in 1930. Dovetailing is primarily a ripping operation, so Lie-Nielsen files the teeth of this saw in a rip configuration with 15 points per inch. This setup balances speed and cut quality. Overall height 4-1\/4\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e The Carcass Saw \u003c\/strong\u003e has 14 points per inch - filed for crosscut. It is used for cutting tenon shoulders and other crosscut operations. This is a good complement to the Dovetail Saw. Overall height 5\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e The Tenon Saw \u003c\/strong\u003e is based on a Henry Disston saw from the early 1900's. Like the Dovetail saw, it is configured for precise rip cuts. However, it has a wider blade and slightly coarser teeth so it can handle the deeper cuts required for tenons. The teeth are filed for a rip cut with 11 points per inch. Overall height 6\".\u003c\/p\u003e\n\u003c!--Modeled on 19th century joinery saws, these are the best you can buy for dovetailing \u0026 carcass joinery. Beveled brass backs\n lend perfect heft and stiffness, so they cut with virtually no added pressure from you. Generously proportioned handles\n are available in curly maple or cocobolo. The Carcass Saw has 14 tpi (crosscut) with very fine .003\" set per side.\n Usable blade is 11\" long by 2-5\/16\" to the brass back. Overall it's 16\" long by 4-7\/8\" high. Each saw comes with use\n and maintenance tips.--\u003e\n\u003ctable class=\"hwpt\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"2\"\u003eSaw\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eTooth\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ePPI\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eSet\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ePlate \u003cbr\u003eThickness\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eBlade \u003cbr\u003eLength\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eOAL\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eCut Depth\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeel\u003c\/th\u003e\n\u003cth\u003eToe\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDovetail\u003c\/td\u003e\n\u003ctd\u003eRip\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e.003\"\u003c\/td\u003e\n\u003ctd\u003e.015\"\u003c\/td\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003ctd\u003e15\"\u003c\/td\u003e\n\u003ctd\u003e1-5\/8\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarcass\u003c\/td\u003e\n\u003ctd\u003eCrosscut\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e.003\"\u003c\/td\u003e\n\u003ctd\u003e.015\"\u003c\/td\u003e\n\u003ctd\u003e14\"\u003c\/td\u003e\n\u003ctd\u003e19\"\u003c\/td\u003e\n\u003ctd\u003e2-1\/4\"\u003c\/td\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTenon\u003c\/td\u003e\n\u003ctd\u003eRip\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e.004\"\u003c\/td\u003e\n\u003ctd\u003e.020\"\u003c\/td\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003ctd\u003e21-1\/4\"\u003c\/td\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003ctd\u003e2-5\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Dovetail Saw - Cherry Handle","offer_id":50821885821210,"sku":"134366","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Carcass Saw - Cherry Handle","offer_id":50821885853978,"sku":"134367","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Tenon Saw - Maple Handle","offer_id":50821885886746,"sku":"134343","price":265.0,"currency_code":"USD","in_stock":true},{"title":"Tenon Saw - Cherry Handle","offer_id":50821885919514,"sku":"134368","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/LNTaperedSaws.png?v=1759352900"},{"product_id":"david-barron-magnetic-dovetail-saw-guide","title":"David Barron Magnetic Dovetail Saw Guide","description":"\u003cp\u003eMagnetic Dovetail Saw Guides make it easier than ever to achieve perfect dovetails with your handsaw. Using powerful rare earth magnets covered with a low friction membrane, these dovetail saw guides by David Barron securely hold the blade of your dovetail saw at the desired angle as you hand cut your dovetails. The guide enables you to cut closer to your layout lines, straight and true for each cut, which means you will spend less time having to pare away material with a chisel to obtain a good fit.\u003c\/p\u003e\n\u003cp\u003eThe jig lets you cut the pins and tails for both through and half-blind dovetails. Made in Canada from anodized aluminum, there are 5 models (angles) available. The steeper angles are often used with softwoods, while the shallow angles are for hardwoods, but in essence the angle (sometimes called slope) you choose is really just a personal preference.\u003c\/p\u003e\n\u003cp\u003eIn use, the guide stands 1-1\/8\" above your work and will reduce your saw's overall cutting depth ability accordingly. The guide works well with almost any type of backsaw with a large enough blade. In his video, David Barron recommends the smooth-cutting \u003ca data-prev-url=\"\/gyokucho-rip-dozuki-saw-372.aspx\" href=\"\/products\/gyokucho-rip-dozuki-saw-372\" target=\"_blank\"\u003e \u003cb\u003e Gyokucho 372 Japanese Dovetail Saw\u003c\/b\u003e\u003c\/a\u003e, which features impulse-hardened teeth for long-lasting sharpness.\u003c\/p\u003e\n\u003cp\u003eFive Dovetail Saw Guide models are available for cutting dovetails in your choice of angles:\u003c\/p\u003e\n\u003cul style=\"margin: -4px 0px 0px 0px;\"\u003e\n\u003cli\u003eModel 1:4\u003c\/li\u003e\n\u003cli\u003eModel 1:5\u003c\/li\u003e\n\u003cli\u003eModel 1:6 (most popular)\u003c\/li\u003e\n\u003cli\u003eModel 1:7\u003c\/li\u003e\n\u003cli\u003eModel 1:8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch5 style=\"background: #D6CBB5; padding: 2px 4px; margin: 20px 0px 0px 0px;\"\u003eAdditional Information\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6 style=\"font-weight: bold;\"\u003eMagnetic Dovetail Guide Instructions (included in the box with the guide)\u003c\/h6\u003e\n\u003cp\u003eThank you for purchasing one of my Dovetail Guides. This simple guide will enable you to cut straight, at the same angle and most importantly, square. To see the guide in action please visit www.youtube.com and search for ‘Hand Cut Dovetails Made Easy’. I have produced lots of other You Tube videos, which you may find interesting. The guides are produced in angles 1:4, 1:5, 1:6, 1:7 and 1:8 which should cover most people’s requirements. There is also a useful 90 degree guide.\u003c\/p\u003e\n\u003cp\u003eThe saw blade is guided by a recessed magnet which makes sure that the blade stays absolutely straight both horizontally as well as vertically. The jig is face with a special low friction material, which allows the saw to slide smoothly. Over time these pads may become scratched which shouldn’t affect accuracy but I've included a spare pair with each guide.\u003c\/p\u003e\n\u003cp\u003eThere are two strips of abrasive, which hold the saw in your chosen position, whilst allowing easy small adjustments. After much use you may wish to replace these, any coarse self-adhesive sand paper will work fine.\u003c\/p\u003e\n\u003cp\u003eThe guide will work with any saw with a good depth of cut, the guide will reduce a saws cutting depth by 28 mm (1 1\/8\"). The saw I recommend and sell, is made by Gyokucho and is model 372, this cuts hardwood effortlessly and the super hard steel blade will last a very long time. Japanese saws with cross cut teeth (as most are) will do the job but cut very much more slowly.\u003c\/p\u003e\n\u003cp\u003eThe following instructions are for cutting through dovetails although half blind or lapped dovetails can be cut just as easily. The process shows the tails being cut first but the guide works equally well for cutting the pins first (for all you old timers!).\u003c\/p\u003e\n\u003ch6 style=\"font-weight: bold; color: #660000;\"\u003eCutting the Tails\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eScribe a line all the way round to the thickness of the mating pin board. A good quality wheel-marking gauge is easiest and can be rolled round the corners.\u003c\/li\u003e\n\u003cli\u003eMark out the dovetails on both sides to your desired spacing (after some practice you will realize that only the square marks across the end grain are necessary).\u003c\/li\u003e\n\u003cli\u003eLine up the magnetic jig with the lines sloping from top right to bottom left and cut down to the scribe line (this is a natural stance for a right hander). Then turn the work in the vice and cut the remaining lines. Again the stance is comfortable and you can also see the cut made earlier.\u003c\/li\u003e\n\u003cli\u003eRemove the waste with a jewelers saw and pare down to the scribe line.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch6 style=\"font-weight: bold; color: #660000;\"\u003eCutting the Pins\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eScribe a line to the thickness of the tailpiece. Do both edges, not the sides.\u003c\/li\u003e\n\u003cli\u003ePosition the tailboard evenly over the pin board in the vice and carefully mark the pins with a sharp marking knife. In time you will realize that only the outer part of these lines is necessary as the jig takes care of the angle. A heavier cut with the knife on the corner will help to locate the saw.\u003c\/li\u003e\n\u003cli\u003eCut down to the scribe line on the waste side. Remove the waste with a jewellers saw and pare down to the scribe line.\u003c\/li\u003e\n\u003cli\u003eTest fit a short way down. If all is ok add glue and tap the joint home.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Veritas Tools","offers":[{"title":"1 to 4 - 14°","offer_id":50821937004826,"sku":"135751","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1 to 5 - 11°","offer_id":50821937037594,"sku":"135752","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1 to 6 - 9.5°","offer_id":50821937070362,"sku":"135753","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1 to 7 - 8°","offer_id":50821937135898,"sku":"135754","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1 to 8 - 7°","offer_id":50821937168666,"sku":"135755","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/135754_SawGuide_Action.png?v=1757276356"},{"product_id":"david-barron-magnetic-guide","title":"David Barron Magnetic Saw Guide","description":"\u003cp\u003eThese clever guides make it easier than ever to achieve perfect joinery cuts with your handsaw. The guides feature powerful magnets that secure your handsaw's blade at the proper angle while you are executing your cut. They're manufactured in Canada using rigid anodized aluminum and rare earth magnets.\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003e 90 Degree Guide \u003c\/b\u003e is designed to accurately control your cut when you wish to saw precisely at a right angle. It's excellent for cutting shoulders, tenon cheeks and finger joints.\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003e 45 Degree Guide \u003c\/b\u003e steers your saw blade correctly for miters, picture frames, moldings, trim, and wherever else you need a precise 45 degree cut.\u003c\/p\u003e","brand":"Veritas Tools","offers":[{"title":"90°","offer_id":50821937365274,"sku":"135757","price":50.0,"currency_code":"USD","in_stock":true},{"title":"45°","offer_id":50821937398042,"sku":"135758","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/135757d_3cb629ca-683e-489a-a182-ab0b11914134.jpg?v=1768342206"},{"product_id":"gyokucho-rip-dozuki-saw-372","title":"Gyokucho RazorSaw Rip Dozuki Saw - Model 372","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Gyokucho RazorSaw Rip Dozuki Saw - Model 372\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Gyokucho's Rip Dozuki Saw is great for all types of joinery. The thin blade has impulse hardened teeth for long life. You'll\n get a very thin kerf and a smooth cut even in very hard woods. The 372 saw has a traditional wooden handle with a cane wrap.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   19 tpi.  Blade thickness is 0.3mm (.012\").   Kerf is .018\".   Blade length is 240mm (9-7\/16\"). \n Overall length is 23-7\/8\".  Blade height (depth of cut) tapers along the length of the blade.  At the heel it measures \n44mm (1-3\/4\") and at the toe it's 57mm (2-1\/4\").  Weighs 8-1\/4 oz.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    This is the saw that David Barron recommends\n   \u003c\/b\u003e\n   for use with his\n   \u003ca data-prev-url=\"\/david-barron-magnetic-dovetail-saw-guide.aspx\" href=\"\/products\/david-barron-magnetic-dovetail-saw-guide\"\u003e\n    Magnetic Dovetail Saw Guides\n   \u003c\/a\u003e\n   and\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/david-barron-magnetic-guide.aspx\" href=\"\/products\/david-barron-magnetic-guide\"\u003e\n    Magnetic Saw Guides\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ci\u003e\n    The Gyokucho Rip Dozuki saw has impulse hardened teeth, which greatly increases the life of their sharp edges, but they cannot be resharpened.\n When the saw eventually dulls, you'll need to\n    \u003ca data-prev-url=\"\/gyokucho-rip-dozuki-saw-372-blade.aspx\" href=\"\/products\/gyokucho-rip-dozuki-saw-372-blade\" style=\"font-style:italic; color#660000;\"\u003e\n     replace the blade\n    \u003c\/a\u003e\n   \u003c\/i\u003e\n   .\n  \u003c\/p\u003e\n  \u003c!--\n  mfg propaganda with bad google translationThin blade series of pronouns Rezaso. The birth of the blade-type saw began from here. 0.3mm ultra-thin blade\n realize a cut that does not require is on the sharp sharpness and . Just a gem, is a product of virtuosity.Rezaso Shirube is a precision machining type.\n Until the general wood and plywood, laminated wood, bamboo is ideal for all finishing. Also width wide type you can cut the material of up to 2 cun angle.\n Vertical minced type is capable of finishing hard natural wood (ebony, rosewood, etc.).Rezaso Shirubeis the ultimate precision machining for the saw. You\n can go mad not finish cut an inch. Since long Sekin is fixed, while feeling the weight of the saw in hand, you beautiful cut with the speedy sharpness is\n obtained when the grind rhythmically. Up to a maximum of 35mm thickness is 0.3mm thickness of the thickness (width wide type is up to 2 cun angle position)\n is possible finishing of the plate of. Also verticalfor type will be able to choose the products that meet the demands can also be used for the finishing\n of hard natural wood (such as ebony, rosewood).http:\/\/www.gyokucho.co.jp\/products\/feature\/Display to compare the fineness of the eye of the saw blade. Our\n in is using a representation of what sheet and are two pitch \u0026 dimension.Pitch (mm)pitchOne blade of the eye of the size, refers to the distance from the\n tip of the Ichiha to the tip of the Tsugiha, as the number is less eye is fine, as the increase, will be rough.Sheet thickness (mm)What th DimensionAs\n basically a thin blade, suitable for crafted work, thick blade is suitable for fixtures. In addition, narrow eyes in the relatively thin blade, has become\n a rough eyes in thick blade.What th DimensionThe number of eyes between a certain distance (1 cun 30.3mm), the craftsman and the like than conventional,\n eyes some to the spacing of the sequence 1 cun of teeth have been using the display method of Sunshaku have teeth (blade) you are viewing the fineness.The\n shock hardening?Using ultra high frequency (27.12MHz), with impact energy only the surface of the saw blade, it is a heat treatment method for obtaining a\n cured layer by heating to the quenching temperature in the 0.003 to 0.005 seconds. Surface hardness, finish in Hv900 ~ 1200. (Hardness comparison:\n dressing file = Hv800 ~ 850)The secret of Yongkang out! There is here! Shock hardeningFirmly only the surface, the center is hardening a flexibleShock\n hardeningHere it is different! Our shock hardening!The Company, in order to finish the blade durable, uses the shock hardening machine that was developed\n in-house. Faithful to protect the \"hardening of once per position blade\", which is the basic of quenching, and one blade one blade surely quenching. In\n order to take advantage of the flexibility of the saw material, it has been subjected to a hardening only the surface.Indelible laser markingAll of the\n products are clearly stated name of product and plate thickness, blade length, blade part number. Products can be confirmed even if you lose your package\n has been used only to check the mark. Using the laser marking by laser irradiation in marking, it is considered so mark does not disappear.Laser marking\nSpecial surface treatmentThe Company adopted the electroless nickel plating.Strong special surface treatment to rustOn the saw blade surface by coating\n processing thin special metal, we observe the saw from rust.Saw blade, or sharpness becomes bad and rust, it can cause breakage eye.It does not have to\n worry about dirty the cutting material by rust.Wood tar has become less likely to adhere. It should be attached wood tar, washed off clean because it\n is washable, easy to care for.Specifications over the coastal areas and, to demonstrate the efficacy at the time of over-the-counter display.--\u003e\n \n\u003c\/body\u003e","brand":"Gyokucho RazorSaw","offers":[{"title":"Default Title","offer_id":50821944836378,"sku":"456468","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/456468-01d.jpg?v=1768342238"},{"product_id":"pax-1776-joinery-saws","title":"Pax 1776 Dovetail Saw - 10 inch","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   Thomas Flinn's PAX 1776 Dovetail Saw is the flagship of their joinery saw collection. It has a traditional folded brass back\n and a fine walnut handle.  The brass back keeps the blade under tension so it stays rigid and adds weight to help it cut smoothly.\n The walnut handle is finished with Danish oil and attached with solid brass split nuts. All saws are hand sharpened and tested\n before they leave the factory.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in the United Kingdom.\n  \u003c\/p\u003e\n\n  \u003cbr\u003e\n  \u003chr\u003e\n  \u003cbr\u003e\n  \u003ctable class=\"hwpt\"\u003e\n   \u003ctr\u003e\n    \u003cth\u003e\n     Saw\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Tooth\n    \u003c\/th\u003e\n    \u003cth\u003e\n     PPI\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Set\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Plate\n     \u003cbr\u003e\n     Thickness\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Blade\n     \u003cbr\u003e\n     Length\n    \u003c\/th\u003e\n    \u003cth\u003e\n     OAL\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Cut Depth\n    \u003c\/th\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     Dovetail\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Rip\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     21\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     .008\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     .020\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     10\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     14-1\/2\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     2\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     Dovetail\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Crosscut\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     21\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     .006\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     .020\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     10\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     14-1\/2\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     2\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/table\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Rip Cut Dovetail Saw - 21 ppi","offer_id":50822004670746,"sku":"159591","price":290.0,"currency_code":"USD","in_stock":true},{"title":"Cross Cut Dovetail Saw - 21 ppi","offer_id":50822004703514,"sku":"159592","price":290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/pax-1776-dovetail-d.jpg?v=1768342665"},{"product_id":"veritas-magnetic-saw-guide","title":"Veritas Magnetic Saw Guide","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Magnetic Saw Guide\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Veritas Magnetic Saw Guide come in 8\" and 14\" widths. These anodized aluminum magnetic guides helps to keep a saw square to the wood. They are especially beneficial for cutting tenon shoulders and cutting an accurate edge of a dado.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Veritas Magnetic Saw Guide can be held against the workpiece either by hand or secured with clamps (not included). The registration surface is about 1 1\/4\" tall, which helps maintain accuracy throughout the cut. The face of the saw guide has three embedded 1\/2\" dia. rare-earth magnets which are covered with low-friction UHMW tape to provide a smooth sliding surface. The bottom of the guide has two high-friction strips to help prevent the guide from slipping.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"8 inch","offer_id":50822024200474,"sku":"177076","price":35.0,"currency_code":"USD","in_stock":true},{"title":"14 inch","offer_id":50822024233242,"sku":"177077","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/177076d_e9aca03e-4f45-400a-9e75-aa33d916e447.jpg?v=1768342861"},{"product_id":"veritas-fine-crosscut-saw-22tpi","title":"Veritas Fine Crosscut Saw -22tpi","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Fine Crosscut Saw -22tpi\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Optimized for material 1\/2\" and thinner, the\n   \u003cb\u003e\n    Veritas Fine Crosscut Saw\n   \u003c\/b\u003e\n   is designed for fine joinery projects. The teeth are set at 0.003\" per side and are filed with a 15° rake and a 60° included angle. They also have alternating 15° bevels that act as small knives to sever wood fibers. This blade geometry provides a fluid starting cut, followed by a smooth and accurate final cut, with almost no tear-out.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made of high-carbon steel, the 22 tpi blade is 9-1\/4\" long and 0.020\" thick, with a cut depth of about 1-9\/16\". The molded spine incorporates stainless-steel powder for weight, glass fiber for stiffness, and an advanced polymer resin binder. The open-grip hardwood handle is comfortable in any hand, even small ones.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   14-1\/4\" long overall.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822044942618,"sku":"177152","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/177152d.jpg?v=1768343075"},{"product_id":"repl-slick-squares-for-barron-guides-pack-of-2","title":"Replacement Slick Squares for Barron Guides - Pack of 2","description":"\u003cp\u003eSlick Squares are the small pieces of slick plastic that sit over the magnet on Barron Saw Guides. Each saw guide uses two slick squares. They're easy to replace if you've accidentally damaged your slick squares with you saw. (We've all done it.)\u003c\/p\u003e\n\u003cp\u003eSlick Squares are self-adhesive. Pull off the blue backing and stick them on in place of your old ones.\u003c\/p\u003e\n\u003ch5\u003eSlick Sizes:\u003c\/h5\u003e\n\u003cul style=\"margin-top: -3px;\"\u003e\n\u003cli\u003eDovetail - 28 mm x 28 mm (1-1\/8\" x 1-1\/8\")\u003c\/li\u003e\n\u003cli\u003e90° - 28 mm x 68 mm (1-1\/8\" x 2-11\/16\")\u003c\/li\u003e\n\u003cli\u003e45° - 28 mm x 70 mm (1-1\/8\" x 2-3\/4\")\u003c\/li\u003e\n\u003cli\u003eSpline - 28 mm x 60 mm (1-1\/8\" x 2-3\/8\") \u003cbr\u003e\u003cspan style=\"font-style: italic; color: #660000;\"\u003e Please Note: We have sold out Slick Squares for the Spline Guide, \u003cbr\u003ebut you can use Slick Squares from either the 90° or 45° guides with a little trimming. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe picture shows the slick squares for the spline guide (28 mm x 60 mm).\u003c\/p\u003e","brand":"Veritas Tools","offers":[{"title":"Barron Dovetail Guides","offer_id":50822070665498,"sku":"135761","price":2.0,"currency_code":"USD","in_stock":true},{"title":"Barron 90° Guide","offer_id":50822070698266,"sku":"135762","price":4.0,"currency_code":"USD","in_stock":true},{"title":"Barron 45° Guide","offer_id":50822070731034,"sku":"135763","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/135761.png?v=1762449010"},{"product_id":"hand-cut-dovetail-starter-kit","title":"Hand Cut Dovetail Starter Kit","description":"\u003cp\u003eAre you interested in making hand cut dovetails? Intimidated by the vast array of possible tool choices? Our experts put together this tool set to help you get started at a reasonable price. You'll have quality tools for every part of the dovetailing process.\u003c\/p\u003e\n\u003cp\u003eNeed help getting started? David Barron's \u003ca href=\"#moreinfo\"\u003e instructions \u003c\/a\u003e for using his dovetail guides and \u003ca href=\"#videos\"\u003e two videos \u003c\/a\u003e demonstrating the technique are below.\u003c\/p\u003e\n\u003ch5\u003eTools in the Kit\u003c\/h5\u003e\n\u003cul style=\"margin-top: -2px;\"\u003e\n\u003cli\u003eBarron Dovetail Guide - 1:6\u003c\/li\u003e\n\u003cli\u003eGyokucho Model 372 Rip Dozuki Saw\u003c\/li\u003e\n\u003cli\u003eVeritas Wheel Marking Gauge\u003c\/li\u003e\n\u003cli\u003eNarex Spear Point Marking Knife\u003c\/li\u003e\n\u003cli\u003eNarex Premium Bevel Edge Chisels - one 6mm(1\/4\") and one 12mm(1\/2\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eBarron Guide\u003c\/h5\u003e\n\u003cp\u003e\u003ca data-prev-url=\"\/david-barron-magnetic-dovetail-saw-guide.aspx\" href=\"\/products\/david-barron-magnetic-dovetail-saw-guide\"\u003e David Barron's Magnetic Dovetail Saw Guide \u003c\/a\u003e makes it easier than ever to achieve perfect dovetails with your handsaw. Using powerful rare earth magnets covered with a low friction membrane, this dovetail saw guide securely holds the blade of your dovetail saw at the desired angle as you hand cut your dovetails. The guide enables you to cut closer to your layout lines, straight and true for each cut, which means you will spend less time having to pare away material with a chisel to obtain a good fit. It's perfect for cutting pins and tails for both through and half-blind dovetails. The starter kit includes one 1:6 (14°) guide. This is the most popular ratio for most hardwood dovetails.\u003c\/p\u003e\n\u003cp\u003eDavid Barron recommends the smooth-cutting Gyokucho 372 Japanese Dovetail Saw, which features impulse-hardened teeth for long-lasting sharpness.\u003c\/p\u003e\n\u003ch5\u003eGyokucho Razor Saw Rip Dozuki Saw\u003c\/h5\u003e\n\u003cp\u003e\u003ca data-prev-url=\"\/gyokucho-rip-dozuki-saw-372.aspx\" href=\"\/products\/gyokucho-rip-dozuki-saw-372\"\u003e Gyokucho's Rip Dozuki Saw \u003c\/a\u003e is great for all types of joinery. The thin blade has impulse hardened teeth for long life. You'll get a very thin kerf and a smooth cut even in very hard woods. The 372 saw has a traditional wooden handle with a cane wrap.\u003c\/p\u003e\n\u003cp\u003e19 tpi.  Blade thickness is 0.3mm (.012\").   Kerf is .018\".  Blade length is 240mm (9-7\/16\").  Overall length is 23-7\/8\".  Blade height (depth of cut) tapers along the length of the blade.  At the heel it measures 44mm (1-3\/4\") and at the toe it's 57mm (2-1\/4\").  Weighs 8-1\/4 oz.\u003c\/p\u003e\n\u003ch5\u003eVeritas Wheel Marking Gauge\u003c\/h5\u003e\n\u003cp\u003eThe cutting wheel on this \u003ca data-prev-url=\"\/veritaswheelmarkinggauge.aspx\" href=\"\/products\/veritaswheelmarkinggauge\"\u003e Veritas gauge \u003c\/a\u003e starts and marks smoothly, without having to worry about attack angle and without tearing during cross-grain marking. The hardened steel wheel is ground sharp with the bevel on the inside, so it naturally pulls the gauge tight against your stock and resists following uncooperative grain.\u003c\/p\u003e\n\u003ch5\u003eNarex Spear Point Marking Knife\u003c\/h5\u003e\n\u003cp\u003e\u003ca data-prev-url=\"\/narex-spear-point-marking-knife.aspx\" href=\"\/products\/narex-spear-point-marking-knife\"\u003e Narex Spear Point Marking Knife \u003c\/a\u003e has a stained hornbeam handle with Manganese Vanadium Steel blade hardened to Rc 61. The blade is beveled on both sides so you can use it on either the left or right side of your rule.\u003c\/p\u003e\n\u003ch5\u003eNarex Premium Bench Chisels\u003c\/h5\u003e\n\u003cp\u003e\u003ca data-prev-url=\"\/narex-premium-bench-chisels.aspx\" href=\"\/products\/narex-premium-bench-chisels\"\u003e Narex's premium Czech-made bevel edged chisels \u003c\/a\u003e are of exceptional quality. The blades are excellent: fine-grained, nicely tempered chrome-manganese steel (Rc 59) with a slim cross section that's ideal for removing dovetail waste. They take and hold a beautiful edge without brittleness. Like most edge tools, they'll need sharpening before use; and like most chisels, they'll feel better and work better after you've gentled their long edges and flattened their backs. Handles are stained hornbeam. The Starter Kit includes two chisels - one 6mm (1\/4\") and one 12mm (1\/2\").\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"videos\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 style=\"background: #D6CBB5; padding: 2px 4px; font-size: 13.33px; margin: 20px 0px 0px 0px;\"\u003eProduct Videos\u003c\/h3\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp style=\"font-weight: bold; font-size: 1.1em;\"\u003eUsing the Barron Magnetic Dovetail Guides\u003c\/p\u003e\n\u003ciframe height=\"315\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/Sz68PBAYKfM?modestbranding=1\u0026amp;list=PL8fbauRQSazNFiDg-y-0fz4GRl9jq6Lm-\u0026amp;rel=0\u0026amp;title=\" width=\"560\"\u003e\n   \u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp style=\"font-weight: bold; font-size: 1.1em;\"\u003eDavid Barron Dovetail Guide\u003c\/p\u003e\n\u003ciframe height=\"315\" src=\"https:\/\/www.youtube-nocookie.com\/embed\/kuDftFtMiu0\" title=\"YouTube video player\" width=\"560\"\u003e\n   \u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch3 style=\"background: #D6CBB5; padding: 2px 4px; font-size: 13.33px; margin: 20px 0px 0px 0px;\"\u003eAdditional Information\u003c\/h3\u003e\n\u003cp style=\"font-weight: bold; font-size: 15px;\"\u003eMagnetic Dovetail Guide Instructions (included in box with guide)\u003c\/p\u003e\n\u003cp\u003eThank you for purchasing one of my Dovetail Guides. This simple guide will enable you to cut straight, at the same angle and most importantly, square. To see the guide in action please visit www.youtube.com and search for ‘Hand Cut Dovetails Made Easy’. I have produced lots of other You Tube videos, which you may find interesting. The guides are produced in angles 1:4, 1:5, 1:6, 1:7 and 1:8 which should cover most people’s requirements. There is also a useful 90 degree guide.\u003c\/p\u003e\n\u003cp\u003eThe saw blade is guided by a recessed magnet which makes sure that the blade stays absolutely straight both horizontally as well as vertically. The jig is face with a special low friction material, which allows the saw to slide smoothly. Over time these pads may become scratched which shouldn’t affect accuracy but I've included a spare pair with each guide.\u003c\/p\u003e\n\u003cp\u003eThere are two strips of abrasive, which hold the saw in your chosen position, whilst allowing easy small adjustments. After much use you may wish to replace these, any coarse self-adhesive sand paper will work fine.\u003c\/p\u003e\n\u003cp\u003eThe guide will work with any saw with a good depth of cut, the guide will reduce a saws cutting depth by 28mm (1 1\/8\"). The saw I recommend and sell, is made by Gyokucho and is model 372, this cuts hardwood effortlessly and the super hard steel blade will last a very long time. Japanese saws with cross cut teeth (as most are) will do the job but cut very much more slowly.\u003c\/p\u003e\n\u003cp\u003eThe following instructions are for cutting through dovetails although half blind or lapped dovetails can be cut just as easily. The process shows the tails being cut first but the guide works equally well for cutting the pins first (for all you old timers!).\u003c\/p\u003e\n\u003cp style=\"font-weight: bold; font-size: 13px; color: #660000;\"\u003eCutting the Tails\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScribe a line all the way round to the thickness of the mating pin board. A good quality wheel-marking gauge is easiest and can be rolled round the corners.\u003c\/li\u003e\n\u003cli\u003eMark out the dovetails on both sides to your desired spacing (after some practice you will realize that only the square marks across the end grain are necessary).\u003c\/li\u003e\n\u003cli\u003eLine up the magnetic jig with the lines sloping from top right to bottom left and cut down to the scribe line (this is a natural stance for a right hander). Then turn the work in the vice and cut the remaining lines. Again the stance is comfortable and you can also see the cut made earlier.\u003c\/li\u003e\n\u003cli\u003eRemove the waste with a jewelers saw and pare down to the scribe line.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp style=\"font-weight: bold; font-size: 13px; color: #660000;\"\u003eCutting the Pins\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eScribe a line to the thickness of the tailpiece. Do both edges, not the sides.\u003c\/li\u003e\n\u003cli\u003ePosition the tailboard evenly over the pin board in the vice and carefully mark the pins with a sharp marking knife. In time you will realize that only the outer part of these lines is necessary as the jig takes care of the angle. A heavier cut with the knife on the corner will help to locate the saw.\u003c\/li\u003e\n\u003cli\u003eCut down to the scribe line on the waste side. Remove the waste with a jewellers saw and pare down to the scribe line.\u003c\/li\u003e\n\u003cli\u003eTest fit a short way down. If all is ok add glue and tap the joint home.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Highland Woodworking","offers":[{"title":"Default Title","offer_id":51589663850778,"sku":"178151","price":220.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/178151-02d.jpg?v=1768595911"},{"product_id":"gyokucho-rip-dozuki-saw-372-3","title":"Gyokucho Fugaku Universal Folding Dozuki Saw - 240mm","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   Gyokucho's Fugaku folding Dozuki joinery saw is simply fantastic. It features a 16.9 tpi universal teeth which excel\n at both rips and crosscuts so it's great for joinery like dovetails. The teeth are mpulse hardened teeth, which greatly\n increases the life of their sharp edges, but they cannot be resharpened. The handle is laquered, quarter sawn beech.\n When folded, the teeth are protected inside the saw handle.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Blade Length - 240 mm (9-3\/8\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Overall Length - 540 mm (21-1\/4\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Folded Length - 290 mm 21-3\/8\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Blade Thickness - 0.3 mm (0.012\")\n   \u003c\/li\u003e\n   \u003c!--\u003cli\u003eMaximum depth of cut - \u003c\/li\u003e--\u003e\n   \u003cli\u003e\n    Kerf - 0.52 mm - (0.02\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Tooth Pitch - 1.5 mm\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Teeth per inch - 16.9\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003c!--\n  mfg propaganda \n\nIt’s a 0.3mm Dozuki saw with rip teeth. Rip cut teeth can be used for both rip cutting and cross cutting, so they are great for making dovetail joints.\n Rip teeth can do tough work, so they are also great for cutting hard wood such as decking materials and plastic. You can cut materials up to 35-40mm thick.\n For rip cut and crosscut, precision wood working, carpentry work, making furniture and musical instruments. You can cut materials such as general timber,\n decking material, ply wood, laminated wood, ebony, rose wood, Formica laminate, MDF panel, and acrylic resin.\n\n--\u003e\n \n\u003c\/body\u003e","brand":"Gyokucho RazorSaw","offers":[{"title":"Fugaku Universal Folding Dozuki Saw","offer_id":51717941395738,"sku":"456472","price":59.0,"currency_code":"USD","in_stock":true},{"title":"Replacement Blade","offer_id":51717941428506,"sku":"456473","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/456472-01d.jpg?v=1771346334"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/collections\/DovetailSaw_CI.jpg?v=1774114039","url":"https:\/\/www.highlandwoodworking.com\/collections\/dovetail-saws.oembed","provider":"Highland Woodworking","version":"1.0","type":"link"}