{"title":"Dovetail Jigs \u0026 Joinery Tools","description":"\u003cp\u003eWe offer dovetail jigs and joinery tools necessary for the most popular types of woodworking joinery.\u003c\/p\u003e\n\u003cp\u003eTry \u003ca data-prev-url=\"\/pocket-hole-loose-tenon-joinery.aspx\" href=\"\/collections\/pocket-hole-loose-tenon-joinery\" title=\"Kreg Tool's Pocket Hole Jigs\" target=\"_blank\" rel=\"noopener\"\u003eKreg Tool's Pocket Hole Joinery Jigs\u003c\/a\u003e for simple pocket hole joints. They are easy to use and will ensure accurate, perfectly square joints. For more ambitious projects,  \u003ca data-prev-url=\"\/leigh-dovetail-jigs.aspx\" href=\"\/collections\/leigh-dovetail-jigs\" title=\"Leigh Dovetail Jigs\" target=\"_blank\" rel=\"noopener\"\u003eLeigh Dovetail Jigs\u003c\/a\u003e excel at sophisticated dovetail joinery. With several models to choose from, a Leigh jig might be the tool you need to create beautiful woodworking joints on that heirloom piece that will be treasured for generations.\u003c\/p\u003e\n\u003cp\u003eAlso, in a category all by itself, is \u003ca data-prev-url=\"\/festool-domino-joiner.aspx\" href=\"\/collections\/festool-domino-joiner\" title=\"Festool Domino Joiner\" target=\"_blank\" rel=\"noopener\"\u003eThe Festool Domino Joiner\u003c\/a\u003e, a revolutionary tool never seen before in mortising - a handheld power mortiser that works in principal like a biscuit joiner. It makes mortising incredibly fast, simple and accurate.\u003c\/p\u003e\n\u003cp\u003eWe have the jigs and accessories to help you make the best woodworking joints - biscuit joints, dovetails, pocket hole joints and all the rest.\u003c\/p\u003e","products":[{"product_id":"leighd4r24dovetailjig","title":"Leigh D4R Pro 24 inch Dovetail Jig","description":"\u003cp\u003eLeigh dovetail jigs set a standard that no other jig can match. The adjustable guide fingers on the D4R Dovetail Jig offer variable spacing of both pins \u0026amp; tails, as close as 1\" apart on center on stock up to 24\" wide. With a Leigh Jig, you design a piece of furniture and then fit the jig to the design, rather than being constrained to the limited number of stock widths that suit conventional fixed templates. The actual cutting of perfect dovetails quickly becomes routine, freeing you to focus on designing creative, aesthetically appealing layouts.\u003c\/p\u003e\n\u003ch5\u003eThrough Dovetails\u003c\/h5\u003e\n\u003cp\u003eIn through dovetail mode, D4R jigs are designed to cut dovetails at 8° (about a 1:7 pitch), creating a sleek, custom look which is especially attractive in thick stock. Another advantage of Leigh's slim angle is unusually great depth of cut, allowing delicate dovetailing in stock far thicker than ordinary bits can handle. A 13\/16\", 8° dovetail bit, for instance, can cut through dovetails in stock up to 1-1\/4\" thick. Hand-cut dovetails would look very much like Leigh production - if you cut them perfectly every time. Operation is surprisingly simple.\u003c\/p\u003e\n\u003cp\u003eOnce you've settled on a joint design, set up pairs of guide fingers accordingly and lock them in place. If you're working in 3\/4\" stock, here's how: Mount the e7 template guide in your router base, install the standard 1\/2\" dovetail bit and set its depth of cut to match the thickness of your pin stock. Mill out as many tail pieces as needed. Next, switch to a 5\/16\" straight bit with the same e7 template guide, and set depth to match the tail piece thickness. Flip the finger assembly over to \"TD Pins\" mode and make a test cut to check the fit with a tail piece. Moving the assembly forward on the jig lets the wedge-shaped pairs of fingers to cover more wood, leaving thicker pins for a tighter fit; moving the assembly backward leaves thinner pins and eases the fit. After a couple of test runs, you're ready to crank out all the pin pieces, with identical perfect fit in every one. Includes 3 bits: 1\/2\", 8° dovetail, 1\/2\", 14° dovetail \u0026amp; 5\/16\" straight bit.\u003c\/p\u003e\n\u003ch5\u003eHalf-Blind Dovetails\u003c\/h5\u003e\n\u003cp\u003eFor half-blind dovetails, a dovetail bit cuts both halves of the joint, with tail pieces (drawer sides) standing vertically just like through dovetail mode, but with pin pieces (drawer fronts) clamped horizontally. Producing a good fit is a simple matter of raising or lowering the bit. To get started, set your depth as suggested in the manual, make a test cut and adjust as needed until the fit is as close to perfect as you please. \u003cbr\u003eIt's worth noting that the 1\/2\" 8° bit supplied with the jig has to cut quite deeply to make a good half-blind fit, so its minimum pin piece (drawer front) thickness is 7\/8\". For half-blind dovetailing in 3\/4\" stock, you'll need to use the 1\/2\", 14° bit listed separately (Item #105317).\u003c\/p\u003e\n\u003ch5\u003eHybrids \u0026amp; Slides\u003c\/h5\u003e\n\u003cp\u003eThe Leigh D4R can do half the work for you in hybrid hand\/machine joints. When your design calls for extremely narrow pins for genuine hand-cut impact, you'll have to cut the tails by hand, since no dovetail bit can taper to much less than a 1\/4\" minimum width. But pins that taper to almost nothing can be cut on the jig just as easily as any others, automating half the work and providing sharp, clean patterns from which to lay out the matching tails.\u003c\/p\u003e\n\u003cp\u003eThe D4R jig does a fine job on through or stopped sliding dovetails, providing convenient holding mechanisms for both horizontal and vertical stock control, and a precisely adjustable router guide system as well. Both depth and thickness of the tail piece are entirely up to you, so you can make the joint as strong as possible in any stock thickness.\u003c\/p\u003e\n\u003cp\u003eLeigh's manual successfully conveys not only the operational details but also the essential simplicity of the jig, so you always know not only what to do but why you're doing it.\u003c\/p\u003e\n\u003ch5\u003eSingle Pass Half-Blind Dovetails\u003c\/h5\u003e\n\u003cp\u003eSingle pass dovetail routing requires precise finger spacing and tail board offset. The horizontal travel of the router must also be limited for accurate tail socket depth. Two design features from Leigh Super Dovetail Jigs make this joint possible:\u003c\/p\u003e\n\u003cul style=\"margin-top: -2px;\"\u003e\n\u003cli\u003ea dual function plastic spacer to space the fingers on the finger bar and position the tail board with the correct offset\u003c\/li\u003e\n\u003cli\u003ea \"stop rod\" inserted in the tail end of fingers to limit router travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eFinger\/Box Joints\u003c\/h5\u003e\n\u003cp\u003eBox joint routing has similar requirements: correct finger spacing and tail (socket) board offset. A similar dual function spacer is used for routing 3\/8\" and 3\/4\" box joints on the standard dovetail fingers. Box joint fit can be problematic but the patented Leigh eBush template guidebush makes precise fit adjustments easy and fast. The box joint spacer, single pass dovetail spacer, nylon stop rod and e7 guidebush are included with all D4R Pro jigs.\u003c\/p\u003e\n\u003ch5\u003eStandard Equipment:\u003c\/h5\u003e\n\u003cul style=\"margin-top: -2px;\"\u003e\n\u003cli\u003e1\/2\", 8° dovetail bit (Leigh # 80-8)\u003c\/li\u003e\n\u003cli\u003e1\/2\", 14° dovetail bit (Leigh # 120-8)\u003c\/li\u003e\n\u003cli\u003e5\/16\" straight bit (Leigh # 140-8)\u003c\/li\u003e\n\u003cli\u003e1\/2\" to 8mm collet reducer (Leigh # 172-8)\u003c\/li\u003e\n\u003cli\u003ee7 template guide\u003c\/li\u003e\n\u003cli\u003eCam-action speed clamps\u003c\/li\u003e\n\u003cli\u003eSliding dovetail fence\u003c\/li\u003e\n\u003cli\u003eSquare drive screwdriver\u003c\/li\u003e\n\u003cli\u003e5\/64\" hex key\u003c\/li\u003e\n\u003cli\u003eFully illustrated user guide\u003c\/li\u003e\n\u003cli\u003eHalf-blind bridge piece material\u003c\/li\u003e\n\u003cli\u003eLeigh Wrench\u003c\/li\u003e\n\u003cli\u003eSingle pass spacer\u003c\/li\u003e\n\u003cli\u003eBox joint spacere\u003c\/li\u003e\n\u003cli\u003eNylon Stop Rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eJig Versions and Packages\u003c\/h5\u003e\n\u003cp\u003eThe Leigh D4R Pro is available in both inch and metric versions. Both versions use the same template guides and routers bits and come with the same standard equipment. The only difference is that the Metric jig has guide scales graduated in millimieters.\u003c\/p\u003e\n\u003cp\u003eThe D4R jig can be purchased by itself or packaged with accessories at a savings. You can add the Vacuum \u0026amp; Router Support(VRS) or the \u003cb\u003e Accessory Kit, which includes the VRS and Highland's 13-piece bit set. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n\u003cp\u003e\u003ca data-prev-url=\"\\library\\leigh_gb_and_adaptor_chart.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/\\library\\leigh_gb_and_adaptor_chart.pdf\"\u003e Click here for the Leigh Template Guide System Selection Chart \u003c\/a\u003e\u003c\/p\u003e","brand":"Leigh Jigs","offers":[{"title":"Inch Dovetail Jig Only","offer_id":50821492506906,"sku":"105304","price":769.0,"currency_code":"USD","in_stock":true},{"title":"Inch Dovetail Jig with VRS","offer_id":50821492539674,"sku":"105714","price":879.0,"currency_code":"USD","in_stock":true},{"title":"Inch Dovetail Jig with Accessory Kit","offer_id":50821492572442,"sku":"105715","price":989.0,"currency_code":"USD","in_stock":true},{"title":"Metric Dovetail Jig Only","offer_id":50821492605210,"sku":"105411","price":769.0,"currency_code":"USD","in_stock":true},{"title":"Metric Dovetail Jig with VRS","offer_id":50821492637978,"sku":"105866","price":879.0,"currency_code":"USD","in_stock":true},{"title":"Metric Dovetail Jig with Accessory Kit","offer_id":50821492670746,"sku":"105867","price":989.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/leigh-d4r-pro-1d_13311976-ed53-4dc6-aa60-56cdc67099ca.jpg?v=1768340061"},{"product_id":"leighisoloctemplatessetof3","title":"Leigh Isoloc Templates","description":"\u003cp\u003eLeigh Industries' Isoloc Templates are accessory joint cutting templates for Leigh's Dovetail jigs. There are a total of 6 joint designs, with all of the designs being amazingly easy to cut. If you've ever cut half-blind dovetails on a fixed jig, you've already done more complicated work than Isoloc templates will require. The precision-machined aluminum templates fit on Leigh dovetail jigs, with no modification required. All you'll need is a 5\/16\" straight router bit. Leigh recommends rigid, clean-cutting solid carbide up-cut spiral bits.\u003c\/p\u003e\n\u003ch5\u003eTemplate Guide\u003c\/h5\u003e\n\u003cp\u003eThe template guide used with Isoloc's is provided with the templates, and it's one of the system's strong points. It's Leigh's Variable Guidebush System, which allows built-in fine tuning of joint tightness. The turret of the nominal 1\/2\" template guide is milled to a 5-degree taper, so rotating the threaded turret within its mounting flange can increase or decrease its effective size in increments of less than .001\", allowing quick and easy tuning to fit any bit. VGS template guides fit any standard Porter-Cable, Black \u0026amp; Decker or DeWalt style router base, and can be fitted to other routers using the Leigh adapters listed separately.\u003c\/p\u003e\n\u003ch5\u003eJoint Patterns\u003c\/h5\u003e\n\u003cp\u003eEach Isoloc template offers two joint patterns. All six patterns can be used for half-blind or through joints, and each can also (with 1\/4\" \u0026amp; 3\/8\" bits instead of the usual 5\/16\" bit) cut joints with a 1\/16\" inlay of contrasting wood. Stock capacities are from 3\/4\" to 1-1\/2\" thickness on the socket or \"pin\" piece and up to 1\" thick on the \"tail\" piece. Maximum workpiece width varies from the standard jig width slightly depending on the shape of each template.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKey and Clover patterns are about 1\/4\" narrower than standard.\u003c\/li\u003e\n\u003cli\u003eEllipse pattern is about 3\/4\" narrower than standard.\u003c\/li\u003e\n\u003cli\u003eMirror Key pattern is about 1-1\/4\" narrower than standard.\u003c\/li\u003e\n\u003cli\u003eBear's Ears and Wave patterns are about 1-3\/4\" narrower than standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!--Key \u0026 Clover patterns can be up to 23-3\/4\" wide.  Ellipse is up to 23-1\/4\" wide; Mirror Key is up to 22-3\/4\" wide; Bear's Ears and Wave patterns up to 22-1\/4\".--\u003e\n\u003cp\u003eEach template comes with a 5-piece VGS template guide system and fully illustrated manual which is a model of clarity.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ctable class=\"hwpt\"\u003e\n\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLeigh Jig\u003c\/th\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003ePattern\u003c\/th\u003e\n\u003cth\u003eHW #\u003c\/th\u003e\n\u003cth\u003eLeigh #\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD3, D4 and D4R\u003c\/td\u003e\n\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/ProductImages\/joinery\/leigh\/isoloc-a-50-50.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/isoloc-a-50-50.jpg\"\u003e\u003c\/td\u003e\n\u003ctd\u003eKey and Mirror Key - A\u003c\/td\u003e\n\u003ctd\u003e105340\u003c\/td\u003e\n\u003ctd\u003eI1A-24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD3, D4 and D4R\u003c\/td\u003e\n\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/ProductImages\/joinery\/leigh\/isoloc-b-50-50.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/isoloc-b-50-50.jpg\"\u003e\u003c\/td\u003e\n\u003ctd\u003eClover and Bear's Ears - B\u003c\/td\u003e\n\u003ctd\u003e105341\u003c\/td\u003e\n\u003ctd\u003eI1B-24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD3, D4 and D4R\u003c\/td\u003e\n\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/ProductImages\/joinery\/leigh\/isoloc-c-50-50.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/isoloc-c-50-50.jpg\"\u003e\u003c\/td\u003e\n\u003ctd\u003eEllipse and Wave - C\u003c\/td\u003e\n\u003ctd\u003e105342\u003c\/td\u003e\n\u003ctd\u003eI1C-24\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD3, D4 and D4R\u003c\/td\u003e\n\u003ctd\u003eAll Three \u003cbr\u003ePatterns\u003c\/td\u003e\n\u003ctd\u003eSet of 3\u003c\/td\u003e\n\u003ctd\u003e105348\u003c\/td\u003e\n\u003ctd\u003eI1-3pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuper 18\u003c\/td\u003e\n\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/ProductImages\/joinery\/leigh\/isoloc-b-50-50.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/isoloc-b-50-50.jpg\"\u003e\u003c\/td\u003e\n\u003ctd\u003eClover and Bear's Ears - B\u003c\/td\u003e\n\u003ctd\u003e105711\u003c\/td\u003e\n\u003ctd\u003eI18B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuper 24\u003c\/td\u003e\n\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/ProductImages\/joinery\/leigh\/isoloc-a-50-50.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/isoloc-a-50-50.jpg\"\u003e\u003c\/td\u003e\n\u003ctd\u003eKey and Mirror Key - A\u003c\/td\u003e\n\u003ctd\u003e105712\u003c\/td\u003e\n\u003ctd\u003eI24A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuper 24\u003c\/td\u003e\n\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/ProductImages\/joinery\/leigh\/isoloc-b-50-50.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/isoloc-b-50-50.jpg\"\u003e\u003c\/td\u003e\n\u003ctd\u003eClover and Bear's Ears - B\u003c\/td\u003e\n\u003ctd\u003e105713\u003c\/td\u003e\n\u003ctd\u003eI24B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD1600\u003c\/td\u003e\n\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/ProductImages\/joinery\/leigh\/isoloc-a-50-50.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/isoloc-a-50-50.jpg\"\u003e\u003c\/td\u003e\n\u003ctd\u003eKey and Mirror Key - A\u003c\/td\u003e\n\u003ctd\u003e105469\u003c\/td\u003e\n\u003ctd\u003eI1600A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eD1600\u003c\/td\u003e\n\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/ProductImages\/joinery\/leigh\/isoloc-c-50-50.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/isoloc-c-50-50.jpg\"\u003e\u003c\/td\u003e\n\u003ctd\u003eEllipse and Wave - C\u003c\/td\u003e\n\u003ctd\u003e105468\u003c\/td\u003e\n\u003ctd\u003eI1600C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Leigh Jigs","offers":[{"title":"D3, D4 and D4R \/ Key and Mirror Key - A","offer_id":50821492801818,"sku":"105340","price":269.0,"currency_code":"USD","in_stock":true},{"title":"D3, D4 and D4R \/ Clover and Bear's Ears - B","offer_id":50821492834586,"sku":"105341","price":269.0,"currency_code":"USD","in_stock":true},{"title":"D3, D4 and D4R \/ Ellipse and Wave - C","offer_id":50821492867354,"sku":"105342","price":269.0,"currency_code":"USD","in_stock":true},{"title":"D3, D4 and D4R \/ Set of 3","offer_id":50821492900122,"sku":"105348","price":649.0,"currency_code":"USD","in_stock":true},{"title":"D1600 \/ Key and Mirror Key - A","offer_id":50821492932890,"sku":"105469","price":199.99,"currency_code":"USD","in_stock":true},{"title":"D1600 \/ Ellipse and Wave - C","offer_id":50821492965658,"sku":"105468","price":199.99,"currency_code":"USD","in_stock":true},{"title":"Super 18 \/ Clover and Bear's Ears - B","offer_id":50821492998426,"sku":"105711","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Super 24 \/ Key and Mirror Key - A","offer_id":50821493031194,"sku":"105712","price":259.0,"currency_code":"USD","in_stock":true},{"title":"Super 24 \/ Clover and Bear's Ears - B","offer_id":50821493063962,"sku":"105713","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/isoloc-3-d.jpg?v=1768340068"},{"product_id":"leighfmtframemortiseandtenonjig","title":"Leigh FMT Pro Frame Mortise \u0026 Tenon Jig","description":"\u003ch5\u003e\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\"\u003eAn FMT Pro and a 1\/2\" plunge router (not included) can turn your shop into a mortise \u0026amp; tenon factory!\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cem\u003e If you're not already using mortise and tenon joinery in everything you build, this amazing jig from Leigh Industries might well change the way you do woodworking, just because it's so interesting to use. On the other hand, if you're already committed to sound solid wood joinery, Leigh's FMT jig can not only turbocharge the process but almost certainly will produce tighter, stronger joints in the bargain.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eIn some ways the Leigh FMT Pro jig is similar to Leigh's hugely successful D-4 Dovetail Jig. In your first five-second glance at the Leigh FMT Pro, it can seem bewilderingly complex and surely difficult to use -- \u003cstrong\u003e but it's not \u003c\/strong\u003e . The Leigh FMT Pro jig itself is a remarkable feat of design and engineering, but operation is just plain simple. Understanding basic operation, one step at a time, takes anywhere from five to ten minutes; it's easier than learning to use a wristwatch. Both mortising and tenoning are fully template guided, and the system lets the tweak of a knob adjust the fit of your joints in increments as small as you can measure (with a micrometer, that is). Setup is so quick and operation so easy that the Leigh FMT jig is just as practical for making one-of-a-kind joints as it is for high volume production.\u003c\/p\u003e\n\u003ch5\u003eMount Your Router\u003c\/h5\u003e\n\u003cp\u003eMounting your router on the extended sub-base that comes with the Leigh FMT Pro might take thirty minutes the first time out, but thereafter you'll spend no more than thirty seconds switching from hand held to jig mode or back again. Most router models are secured with rods clamped through the edge guide holes in the base -- no disassembly of the machine, no screw holes to drill. A centering mandrel makes very accurate concentric alignment virtually foolproof.\u003c\/p\u003e\n\u003ch5\u003eMortises\u003c\/h5\u003e\n\u003cp\u003eRouting mortises is stunningly easy. Start by marking the center of each mortise to be cut on one workpiece. Identical workpieces can be set to stops or reference marks on shop-made outriggers, with no further marking required. Clamp the stock under the Leigh FMT jig's 3\" x 5\" work opening, then move the table surface to center a crossline sight over the mortise's center mark. Snap a joint guide into the work table and install the matching spiral end mill bit in your plunge router. Set two guide pins in the subbase into a track on the right and the joint guide on the left, and dial the tapered pins up or down as needed for easy movement with no loose play. Set depth of cut and plunge rout the mortise. You are done! That really is all there is to it.\u003c\/p\u003e\n\u003ch5\u003eTenons\u003c\/h5\u003e\n\u003cp\u003eTo cut a tenon, or a hundred alike, mark the center of the tenon on one end of one workpiece, then secure the workpiece against the Leigh FMT Pro's vertical clamp plate with built-in cam clamps. Move the work table to center the crossline sight over the tenon. Put the router on the work table and set depth of cut. Rout the tenon. Check the fit, and adjust as needed by turning a guide pin knob. Two or three trials produces a perfect fit, and you're done. Once again, that's all there is to it. The Leigh FMT jig's clamp plate tilts up to 30°, and the tenon side stop fence can be angled left or right up to 45°, so angled and compound joints can be set up and cut as easily as straight ones. As soon as you're familiar with the basics, you can move quickly onward to multiples: side by side or tandem mortises \u0026amp; tenons, triples or quads, whatever a joint design calls for, cutting all of them as easily and precisely as a single joint.\u003c\/p\u003e\n\u003ch5\u003eCapacities\u003c\/h5\u003e\n\u003cp\u003eSince the work table can be moved both side to side and in \u0026amp; out, with precisely adjustable stops controlling both dimensions, you can work on an area as large as 3\" x 5\" without unclamping and repositioning the workpiece.\u003c\/p\u003e\n\u003cp\u003eThe Leigh FMT Pro comes with five 5\/16\" joint guides and a 5\/16\" HSS up-cut spiral end mill bit, so you're ready to cut 5\/16\" mortises and tenons in lengths of 1\/2\", 3\/4\", 1\", 1-1\/4\" or 1-1\/2\".\u003c\/p\u003e\n\u003cp\u003eBy using the side-to-side stops on the work table, you can make joints up to nearly twice the length of whichever Joint Guide you're using. The longest 5\/16\" joint, for instance, is almost 3\"; 3\/8\" and 1\/2\" joints can be up to nearly 5\" long. Furthermore, you can expand the Leigh FMT jig's range considerably by using smaller bits for the mortises and larger bits for the tenons with any given Joint Guide set. Up to 47 custom joints can be produced just as accurately and repeatably as the standard sizes, down to a tiny 1\/16\" x 1\/8\". Maximum mortise depth depends on the cutting length of the bit you're using, and (with 1\/2\" bits) your router's plunge range.\u003c\/p\u003e\n\u003ch5\u003eOptions\u003c\/h5\u003e\n\u003cp\u003eJoint Guides for other tenon sizes are sold in sets for 1\/4\", 3\/8\" and 1\/2\" joints. Given the flexibility afforded by varying the bit sizes and moving the work table, the complete array of joint guides for the Leigh FMT jig can cut a total of 68 different joint sizes (using 8 sizes of spiral bits, 1\/16\" to 1\/2\"), from an incredible 1\/16\" x 1\/8\" to 1\/2\" x 5\". Each guide set comes with a storage stand.\u003c\/p\u003e\n\u003ch5\u003eStandard Equipment\u003c\/h5\u003e\n\u003cul style=\"margin-top: -3px;\"\u003e\n\u003cli\u003eUniversal sub-base attaches to any plunge router\u003c\/li\u003e\n\u003cli\u003e5\/16\" (8 mm) HSS spiral upcut bit with 1\/2\" shank (Leigh No. 170-500)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e Inch version includes: \u003c\/b\u003e Five 5\/16\" joint guides (5\/16\" by 1\/2\", 3\/4\", 1\", 1-1\/4\" and 1-1\/2\"), which can make over 21 sizes of mortises and tenons\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e Metric version includes: \u003c\/b\u003e Six 8 mm\" joint guides (8 mm by 15, 20, 25, 30, 35 and 40 mm), which can make over 21 sizes of mortises and tenons\u003c\/li\u003e\n\u003cli\u003eJoint guide stand\u003c\/li\u003e\n\u003cli\u003eTwo cam-action speed clamps\u003c\/li\u003e\n\u003cli\u003eAdjustable sidestop fence for tenoning\u003c\/li\u003e\n\u003cli\u003eTwo outrigger bars\u003c\/li\u003e\n\u003cli\u003eScrewdrivers and mounting hardware\u003c\/li\u003e\n\u003cli\u003eIllustrated user guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eJig Versions and Packages\u003c\/h5\u003e\n\u003cp\u003eThe Leigh FMT Pro is available in both inch and metric versions. The inch version comes with 5\/16\" guides and the metric version has 8 mm guides. Both versions include a 5\/16\" HSS Spiral Up-cut Bit (5\/16\" equals 7.938 mm and thus serves as an 8 mm bit for use with the 8 mm guides). Other than the guides and router bits one uses, the inch and metric version jigs are identical. Note that the other metric guides require metric sized bits. Highland and Leigh do not offer metric sized spiral bits.\u003c\/p\u003e\n\u003cp\u003eAs noted above, the Leigh FMT Pro comes ready to make a few joints, but you can expand the capabilities of your FMT Pro by adding an accessory kit. The accessory kits include a set of 16 joint guides for 1\/4\", 3\/8\" \u0026amp; 1\/2\" tenons, plus a set of 8 spiral up-cut bits.\u003c\/p\u003e\n\u003cp\u003eAccessory packages are not available for the metric version of the FMT Pro.\u003c\/p\u003e","brand":"Leigh Jigs","offers":[{"title":"FMT Pro - Inch","offer_id":50821516001562,"sku":"105390","price":1399.0,"currency_code":"USD","in_stock":true},{"title":"FMT Pro - Inch with Carbide Accessory Kit","offer_id":50821516034330,"sku":"105721","price":1699.0,"currency_code":"USD","in_stock":true},{"title":"FMT Pro - Metric","offer_id":50821516067098,"sku":"105399","price":1399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105390.png?v=1760463284"},{"product_id":"leighfmtjigsetof3jointguidesets","title":"Leigh Joint Guide Sets for the FMT Pro and Super FMT Jigs","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Leigh FMT Guide Sets are sized by the thickness of the tenon created.  The joint guide is used with an up-cut spiral bit(sold separately) to create both the tenon \u0026amp; the mortise. Each set includes several guides to create tenons of different widths. Even more thicknesses and widths can be created by mixing up joint guide and router bit sizes. (See your manual for details.)\n  \u003c\/p\u003e\n  \u003cp\u003e\n   All guides fit the Leigh FMT, FMT Pro and Super FMT jigs.  All three versions of the FMT come with the 5\/16\" Joint Guide Set (8mm for metric jigs).\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Metric Joint guides require metric sized bits.  We do not offer metric spiral bits.\n  \u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n  \u003ctable class=\"hwpt\"\u003e\n   \u003ctr\u003e\n    \u003cth\u003e\n     Size\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Contents\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Leigh #\n    \u003c\/th\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     1\/4\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8 Guides (5\/16\", 3\/8\", 1\/2\", 5\/8\", 3\/4\", 1\", 1-1\/4\" \u0026amp; 1-1\/2\") \u0026amp; one stand\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     6704\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     5\/16\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     5 Guides (1\/2\", 3\/4\", 1\", 1-1\/4\" \u0026amp; 1-1\/2\") \u0026amp; one stand\n     \u003cbr\u003e\n     This set comes with the inch FMT Pro \u0026amp; Super FMT.\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     6705\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     3\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     4 Guides (1\", 1-1\/2\", 2\" \u0026amp; 2-1\/2\") \u0026amp; one stand\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     6706\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     4 Guides (1\", 1-1\/2\", 2\" \u0026amp; 2-1\/2\") \u0026amp; one stand\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     6708\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     Set of 3\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     All guides \u0026amp; stands in the 1\/4\", 3\/8\" \u0026amp; 1\/2\" sets listed above.\n     \u003c!--\u003cbr\u003e\u003cbr\u003eThis set complements the standard guide set that come with inch FMT Pro \u0026amp; Super FMT.--\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     6720\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     6mm\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8 Guides (8mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm \u0026amp; 40mm) \u0026amp; one stand\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     6806\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     8mm\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     6 Guides (15mm, 20mm, 25mm, 30mm, 35mm \u0026amp; 40mm) \u0026amp; one stand.\n     \u003cbr\u003e\n     This set comes with the metric FMT Pro \u0026amp; Super FMT.\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     6808\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     10mm\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     5 Guides (25mm, 35mm, 45mm, 55mm \u0026amp; 65mm) \u0026amp; one stand\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     6810\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     12mm\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     5 Guides (25mm, 35mm, 45mm, 55mm \u0026amp; 65mm) \u0026amp; one stand\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     6812\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     Set of 3\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     All guides \u0026amp; stands in the 6mm, 10mm \u0026amp; 12mm; sets listed above.\n     \u003c!--\u003cbr\u003e\u003cbr\u003eThis set complements the standard guide set that comes with the metric FMT Pro \u0026amp; Super FMT.--\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     6820\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/table\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"1\/4 inch","offer_id":50821516132634,"sku":"105391","price":135.5,"currency_code":"USD","in_stock":true},{"title":"5\/16 inch","offer_id":50821516165402,"sku":"105392","price":89.5,"currency_code":"USD","in_stock":true},{"title":"3\/8 inch","offer_id":50821516198170,"sku":"105393","price":73.5,"currency_code":"USD","in_stock":true},{"title":"1\/2 inch","offer_id":50821516230938,"sku":"105394","price":73.5,"currency_code":"USD","in_stock":true},{"title":"Set of 3 - Inch","offer_id":50821516263706,"sku":"105395","price":199.0,"currency_code":"USD","in_stock":true},{"title":"6mm","offer_id":50821516296474,"sku":"105489","price":135.5,"currency_code":"USD","in_stock":true},{"title":"8mm","offer_id":50821516329242,"sku":"105490","price":104.0,"currency_code":"USD","in_stock":true},{"title":"10mm","offer_id":50821516362010,"sku":"105491","price":89.5,"currency_code":"USD","in_stock":true},{"title":"12mm","offer_id":50821516394778,"sku":"105492","price":89.5,"currency_code":"USD","in_stock":true},{"title":"Set of 3 - Metric","offer_id":50821516427546,"sku":"105493","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105395.jpg?v=1751675881"},{"product_id":"fffaceframebiscuits","title":"Porter Cable FF Faceframe Biscuits","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Porter Cable FF Faceframe Biscuits\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Porter Cable's faceframe biscuits can join material as narrow as 1-1\/2\" wide. FF biscuits are 13mm x 30mm with the strength of full size biscuits. Ideal for small picture frames, box corners, and cabinet faces. Pack of 175.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Porter-Cable","offers":[{"title":"Default Title","offer_id":50821549261082,"sku":"179064","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/5563.jpg?v=1751676650"},{"product_id":"joinery-biscuits-box-of-1000","title":"Joinery Biscuits","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Economical biscuits for general use. Made of straight grained hardwoods compressed under high pressure for maximum expansion when exposed to water-based glues.\n  \u003c\/p\u003e\n  \u003ctable class=\"hwpt\"\u003e\n   \u003ctr\u003e\n    \u003cth\u003e\n     Biscuit Size\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Length\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Width\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Thickness\n    \u003c\/th\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     0\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1-7\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     5\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     5\/32\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     10\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     2-1\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/4\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     5\/32\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     20\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     2-3\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     7\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     5\/32\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/table\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"No. 0 - Pack of 50","offer_id":50821549326618,"sku":"179025","price":5.0,"currency_code":"USD","in_stock":true},{"title":"No. 10 - Pack of 50","offer_id":50821549359386,"sku":"179026","price":5.0,"currency_code":"USD","in_stock":true},{"title":"No. 20 - Pack of 50","offer_id":50821549392154,"sku":"179027","price":5.0,"currency_code":"USD","in_stock":true},{"title":"No. 0 - Pack of 1000","offer_id":50821549424922,"sku":"179002","price":52.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 - Pack of 1000","offer_id":50821549457690,"sku":"179003","price":58.0,"currency_code":"USD","in_stock":true},{"title":"No. 20 - Pack of 1000","offer_id":50821549490458,"sku":"179004","price":58.0,"currency_code":"USD","in_stock":true},{"title":"Assortment - Pack of 1000","offer_id":50821549523226,"sku":"179098","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/17900.jpg?v=1751676653"},{"product_id":"kreg-classic-face-clamp","title":"Kreg Classic Face Clamp","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Kreg Classic Face Clamp\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The\n   \u003cb\u003e\n    Kreg Classic Face Clamps\n   \u003c\/b\u003e\n   are designed for creating perfectly flush joints when using Kreg Jigs. They also work great for many other shop projects which require solid clamping without marring the surface of the material. These clamps feature large clamp pads that distribute clamping force evenly, and hold pieces flush during assembly. When used in Kreg Joinery, the extra-large clamp face gets positioned on the “show” side of the joint.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The\n   \u003cb\u003e\n    Kreg Classic Face Clamps\n   \u003c\/b\u003e\n   are available in two sizes: 2\" reach (clamps materials up to 2-1\/4\" thick) and 3\" reach (clamps materials up to 2-3\/4\" thick). Both have a simple screw that adjusts the clamp to match material thickness, plus comfortable padded handles\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"2 inch","offer_id":50821558239514,"sku":"124148","price":21.0,"currency_code":"USD","in_stock":true},{"title":"3 inch","offer_id":50821558272282,"sku":"124035","price":31.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/124035bd.jpg?v=1768340429"},{"product_id":"kregpocketholewoodplugs","title":"Kreg Pocket Hole Wood Plugs - Pack of 50","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kreg Pocket Hole Wood Plugs\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Wood Plugs for use with Kreg Pocket Hole Jigs. Pack of 50.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"Oak","offer_id":50821558337818,"sku":"475451","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Maple","offer_id":50821558370586,"sku":"475452","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Pine","offer_id":50821558403354,"sku":"475456","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Paint-grade Hardwood","offer_id":50821558436122,"sku":"185410","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/475451bd.jpg?v=1768340432"},{"product_id":"kregdriverbits3and6","title":"Kreg No.2 Square Driver Bits","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Kreg No.2 Square Driver Bits\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   #2 square drive bits for Kreg Pocket Hole Jigs offer long reach where its needed and easier control where it isn't.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Sold in a pack of two 6\" drivers or a pack of two drivers (one 3\" \u0026amp; one 6\").\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"3 inch and 6 inch","offer_id":50821559189786,"sku":"475268","price":7.25,"currency_code":"USD","in_stock":true},{"title":"Two 6 inch","offer_id":50821559222554,"sku":"475269","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/475268d.jpg?v=1768340441"},{"product_id":"millerdowel1xkitwith50birchdowels","title":"Miller Dowel Joinery System","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   Miller Dowels offer a quick and convenient way to align and reinforce right-angle joints.\n  Simply drill the hole with the Miller Dowel Drill, then glue and tap in the Miller Dowel.\n Choose the miller Dowel species for the most pleasing contrast or best color match.\n Shear and tensile strength should be roughly equal to that of a smooth, conventional 1\/4\" dowel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The\n   \u003cb\u003e\n    Mini-X\n   \u003c\/b\u003e\n   is 1-5\/8\" long and works on 1\/2\" to 3\/4\" stock. The dowels come in packs of 100 and are available in birch, cherry,\n oak \u0026amp; walnut. The Starter Kit comes with one Mini-X Miller Drill bit and 100 birch Mini-X Miller Dowels.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The\n   \u003cb\u003e\n    1X\n   \u003c\/b\u003e\n   is 2-3\/4\" long and works in stock up to 1-1\/8\". The dowels come in packs of 40 and are available in birch, cherry,\n oak \u0026amp; walnut. The Starter Kit comes with one 1X Miller Drill bit and 50 birch 1X Miller Dowels.\n  \u003c\/p\u003e\n  \u003c!--\u003c\/p\u003eThe \u003cb\u003e2X\u003c\/b\u003e is 3-1\/2\u0026quot; long and works in stock up to 1-5\/8\u0026quot; stock. The dowels come in packs of 40 and are available in birch, cherry,\n oak \u0026amp; walnut. The Starter Kit comes with one 2X Miller Drill bit and 50 birch 2X Miller Dowels.\u003c\/p\u003e--\u003e\n  \u003c!--\nadd drill bit sizes\nadd drill bit descriptions\n--\u003e\n  \u003c!--\nold copy\n\n\u003cp\u003eThis system offers a quick and convenient way to align and reinforce right-angle joints.\n 7\/16\" long x 13\/32\" diameter heads are turned smooth and clean to serve as self plugs.\n Simply drill the hole with the Miller Dowel Drill, then glue and tap in the Miller Dowel.\n Choose from birch, cherry, oak or walnut dowels for the most pleasing contrast or best color match.\n Shear and tensile strength should be roughly equal to that of a smooth, conventional 1\/4\" dowel.\n The new Mini-X is 1-5\/8\" long and is optimized for 1\/2\" stock; 1X is 2-3\/4\" long for 1\" stock,\n and 2X is 3-1\/2\" long for 1-1\/2\" stock.  The 1X kit includes Miller's \"Quick-Drill\" step drill\n bit and 50 birch Miller Dowels.\u003c\/p\u003e\n --\u003e\n \n\u003c\/body\u003e","brand":"Miller Dowel Company","offers":[{"title":"Mini-X Cherry Miller Dowels - Pack of 100","offer_id":50821598642458,"sku":"101064","price":25.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/miller-dowel_684d8e27-0d67-47e0-ae4e-e3ac25f327fa.jpg?v=1768340632"},{"product_id":"leighd4rmanual","title":"Leigh D4R Pro Manual","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Leigh D4R Pro Manual\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This manual successfully conveys not only the operational details, but also the essential simplicity of the Leigh D4R Pro Dovetail Jig, so you always know not only what to do but why you're doing it.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Default Title","offer_id":50821599133978,"sku":"105414","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105414d.jpg?v=1768340634"},{"product_id":"setof7dovetailbitsforleighd1600andsuperjigs","title":"Set of 7 Dovetail Bits for Leigh Super Jigs and D1600","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Set of 7 Dovetail Bits for Leigh Super Jigs and D1600\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This Highland 7-bit set for the Super Dovetail and D1600 Jigs includes the following: 1\/4\" 8° dovetail bit, 5\/16\" 8° dovetail bit, 3\/8\" 8° dovetail bit, 7\/16\" 8° dovetail bit, 1\/2\" 10° dovetail bit, 1\/2\" 12° dovetail bit and 1\/2\" 18° dovetail bit.  It complements the Leigh  D1600 perfectly.  With the seven bits in this set and the three bits that come with the jig, you are equipped to make any joint within the D1600 or Super jig's capabilities.  All bits are 8mm shank.  A 1\/2\" to 8mm collet adapter is included with the jig.  If you need one we also carry them separately (see below).\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Highland Woodworking","offers":[{"title":"Default Title","offer_id":50821606899994,"sku":"105465","price":126.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105465.jpg?v=1751677771"},{"product_id":"kreg-right-angle-clamp","title":"Kreg AutoMaxx Right Angle Clamp","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   The\n   \u003cb\u003e\n    Kreg Right Angle Clamp\n   \u003c\/b\u003e\n   helps align panels at 90° for casework and helps hold face frames to carcasses while\n driving screws.  A steel dowel slips into a pocket hole while a swivel pad on the other jaw presses against the attaching panel.\n Now you can drive a screw in an adjacent hole without jerking the pieces out of alignment.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Right Angle Clamp uses Automaxx Auto-Adjust Technology so it adjusts to match the material thiclkness automatically with\n a squeeze of the handles. It works with a variety of materials, from 1\/2\" plywood to two by fours.\n  \u003c\/p\u003e\n\n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"Default Title","offer_id":50821613715738,"sku":"124139","price":52.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/124139d.jpg?v=1768340677"},{"product_id":"cmt48tbiscuitjoinerblade-22mmbore","title":"CMT 4 inch Biscuit Joiner Blade - 22mm Bore","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   CMT makes a range of top-quality replacement blades for popular biscuit joiners. all blades ar made from high-grade German steel and use micrograin carbide teeth for many years of use. CMT blades have an orange PTFE coating to prvent pitch buildup.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   All three blades are 4\" diameter and have a 22mm (7\/8\") bore.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold;\"\u003e\n   Use the chart below to help select the correct blade for your needs.\n  \u003c\/p\u003e\n  \u003ctable class=\"hwpt\"\u003e\n   \u003ctr\u003e\n    \u003c!--\u003cth\u003eDiameter\u003c\/th\u003e--\u003e\n    \u003c!--\u003cth\u003eBore\u003c\/th\u003e--\u003e\n    \u003cth\u003e\n     Teeth\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Tooth\n     \u003cbr\u003e\n     Type\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Hook\n     \u003cbr\u003e\n     Angle\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Bevel\n     \u003cbr\u003e\n     Angle\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Kerf\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Plate\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Fits\n    \u003c\/th\u003e\n    \u003cth\u003e\n     CMT #\n    \u003c\/th\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003c!--\u003ctd\u003e4\u0026quot;\u003c\/td\u003e--\u003e\n    \u003c!--\u003ctd\u003e22mm (7\/8\u0026quot;)\u003c\/td\u003e--\u003e\n    \u003ctd\u003e\n     6\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     ATB\n     \u003cbr\u003e\n     \u003cspan style=\"font-size:.9em;\"\u003e\n      Alternate\n      \u003cbr\u003e\n      Top Bevel\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     18°\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     10°\n    \u003c\/td\u003e\n    \u003ctd style=\"white-space:nowrap;\"\u003e\n     0.157\"\n    \u003c\/td\u003e\n    \u003ctd style=\"white-space:nowrap;\"\u003e\n     0.122\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cspan style=\"font-size:1em\"\u003e\n      Lamello, Dewalt, Bosch, Skil, Freud, Metabo, Virutex, Porter Cable, Bosch \u0026amp; other popular biscuit jointer models.\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n    \u003ctd style=\"white-space:nowrap;\"\u003e\n     240.006.04\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003c!--\u003ctd\u003e4\u0026quot;\u003c\/td\u003e--\u003e\n    \u003c!--\u003ctd\u003e22mm (7\/8\u0026quot;)\u003c\/td\u003e--\u003e\n    \u003ctd\u003e\n     8\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     ATB\n     \u003cbr\u003e\n     \u003cspan style=\"font-size:.9em;\"\u003e\n      Alternate\n      \u003cbr\u003e\n      Top Bevel\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     15°\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     10°\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     0.157\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     0.110\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cspan style=\"font-size:1em\"\u003e\n      Lamello, Dewalt, Porter-Cable, Skil, Bosch, Freud \u0026amp; other popular biscuit jointers.\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n    \u003ctd style=\"white-space:nowrap;\"\u003e\n     240.008.04\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003c!--\u003ctr\u003e\t\t\u003ctd\u003e4\u0026quot;\u003c\/td\u003e    HIDE ROW IF RE-ACTIVATING\t\t\u003ctd\u003e22mm (7\/8\u0026quot;)\u003c\/td\u003e    HIDE ROW IF RE-ACTIVATING\t\t\u003ctd\u003e8\u003c\/td\u003e\t\t\u003ctd\u003eFlat\u003c\/td\u003e\t\t\u003ctd\u003e15\u0026deg;\u003c\/td\u003e\t\t\u003ctd\u003en\/a\u003c\/td\u003e\t\t\u003ctd\u003e0.157\u0026quot;\u003c\/td\u003e\t\t\u003ctd\u003e0.154\u0026quot;\u003c\/td\u003e\t\t\u003ctd\u003e\u003cspan style=\"font-size:1em\"\u003eRecommended for Porter-Cable \u0026amp; Virutex biscuit jointers.\u003c\/span\u003e\u003c\/td\u003e\t\t\u003ctd\u003e241.008.04\u003c\/td\u003e\t\u003c\/tr\u003e--\u003e\n  \u003c\/table\u003e\n  \u003c!--\u003cp\u003e\u003cb\u003eDoes not fit Porter-Cable biscuit joiners or Ryobi JM-100K biscuit joiner.\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCMT # 240.008.04\u003c\/p\u003e\u003cp\u003eFits Porter-Cable biscuit joiner models 556 \u0026 557.\u003c\/p\u003e6-toothDiam  Bore\tFT  Teeth  Kerf  Plate  Hook Angle  Bevel Angle Tooth Type4\"\t22mm\t4\/4,5 - 9,5\/36\t6\t0.157\t0.122\t18\u0026deg;\t10\u0026deg; ATB\t240.006.04CMTs 100mm (4\") biscuit joiner saw blade with orange PTFE industrial coating trademark makes biscuit joints quickly and easily. High-grade German steel and 8 micrograin carbide-tipped teeth guarantee years of use. This blade fits Lamello, Dewalt®, Bosch®, Skil®, Freud®, Metabo®, Virutex®, Porter Cable®, Bosch® and other popular biscuit joints models.8-tooth atbDiam  Bore\tFT  Teeth  Kerf  Plate  Hook Angle  Bevel Angle Tooth Type4\"\t22mm\t4\/4,5 - 9,5\/36\t8\t0.157\t0.110\t15\u0026deg;\t10\u0026deg; ATB\t240.008.04CMTs 100mm (4\") biscuit joiner saw blades with orange PTFE industrial coating trademark make biscuit joints quickly and easily. High-grade German steel and 8 micrograin carbide-tipped teeth guarantee years of use. These blades fit Lamello, Dewalt, Porter-Cable, Skil, Bosch, Freud and other popular biscuit joints models.8-tooth flatDiam  Bore\tFT  Teeth  Kerf  Plate  Hook Angle  Bevel Angle Tooth Type4\"\t22mm\t \t8\t0.157\t0.154\t15\u0026deg;\tFLAT\t241.008.04241.008.04 is for Virutex and Porter Cable machines.--\u003e\n \n\u003c\/body\u003e","brand":"CMT Tools","offers":[{"title":"6-tooth ATB","offer_id":50821617647898,"sku":"102333","price":28.0,"currency_code":"USD","in_stock":true},{"title":"8-tooth ATB","offer_id":50821617680666,"sku":"102331","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/102331d.jpg?v=1768340692"},{"product_id":"kregpocketholescrewkit","title":"Kreg Pocket Hole Screw Kit","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kreg Pocket Hole Screw Kit\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Kreg's Pocket Hole Screws have a Pocket-Hole™ washer head screw design which provides a large amount of surface area on the head of the screw ensuring the screw seats securely in the bottom of the pocket.  Coarse screws are for joining softwood, plywood \u0026amp; MDF. Use fine screws for hardwoods.\n   \u003cbr\u003e\n   \u003cbr\u003e\n   The Kreg Pocket Hole Screw kit has 150 each of 1\" fine, 1\" coarse, 1-1\/4\" fine, 1-1\/4\" coarse and quantity 75 of the 2-1\/2\" Coarse Blue-Kote weather resistant screws.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"Default Title","offer_id":50821619351834,"sku":"185453","price":42.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/185453.jpg?v=1751677992"},{"product_id":"setof12bitsforleighd4rdovetailjig","title":"13 Piece Bit Set for Leigh D-Series 24in Dovetail Jigs","description":"\u003cbody\u003e\n  \u003cp\u003e\n   This Highland set complements the basic D4R bit selection. With it and standard bits, you can make every dovetail joint\n   possible with the D4R. It is the equivalent of Leigh's 2411-8 bit set and includes:\n  \u003c\/p\u003e\n  \u003cp\u003e\n  \u003c\/p\u003e\n  \u003ctable class=\"hwpt\"\u003e\n   \u003ctr\u003e\n    \u003cth\u003e\n     Leigh Equivalent\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Size\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Angle\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Shank\n    \u003c\/th\u003e\n     \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     50-8\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/4\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8°\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8mm\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     60-8\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     5\/16\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8°\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8mm\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     70-8\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8°\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8mm\n    \u003c\/td\u003e\n    \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     75-8\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     7\/16\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8°\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8mm\n    \u003c\/td\u003e\n    \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     101-8\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     10°\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8mm\n    \u003c\/td\u003e\n    \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     112-8\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     12°\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8mm\n    \u003c\/td\u003e\n    \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     128-8\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     18°\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8mm\n    \u003c\/td\u003e\n    \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     90\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     11\/16\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8°\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     100\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     13\/16\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8°\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     150\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     7\/16\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Straight\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     160\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Straight\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     172-8\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     8mm\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Collet Adapter\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     716C\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     5\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Guide Bushing\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     N\/A\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/table\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"Default Title","offer_id":50821623906586,"sku":"105497","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105301.jpg?v=1751678050"},{"product_id":"leighfmtaccessorykit","title":"Leigh FMT Accessory Kit","description":"\u003cp\u003eLeigh's FMT accessory kit provides more of the tools you need to maximize the abilities of your FMT jig. The kit includes 16 accessory joint guides that don't come with the FMT jigs and eight carbide spiral up-cut bits.\u003c\/p\u003e\n\u003cp\u003eThere are not accessory kits for metric FMT jigs.\u003c\/p\u003e\n\u003ch5\u003eContents\u003c\/h5\u003e\n\u003cul style=\"margin-top: -3px;\"\u003e\n\u003cli\u003e1\/4\" Guide Set - 5\/16\", 3\/8\", 1\/2\", 5\/8\", 3\/4\", 1\", 1-1\/4\" \u0026amp; 1-1\/2\" width guides + stand\u003c\/li\u003e\n\u003cli\u003e3\/8\" Guide Set - 1\", 1-1\/2\", 2\" \u0026amp; 2-1\/2\" width guides + stand\u003c\/li\u003e\n\u003cli\u003e1\/2\" Guide Set - 1\", 1-1\/2\", 2\" \u0026amp; 2-1\/2\" width guides + stand\u003c\/li\u003e\n\u003cli\u003e1\/16\" HSS Spiral Up-Cut Bit\u003c\/li\u003e\n\u003cli\u003e1\/8\" solid Carbide Spiral Up-Cut Bit - 164C\u003c\/li\u003e\n\u003cli\u003e3\/16\" solid Carbide Spiral Up-Cut Bit - 166C\u003c\/li\u003e\n\u003cli\u003e1\/4\" solid Carbide Spiral Up-Cut Bit - 168C\u003c\/li\u003e\n\u003cli\u003e5\/16\" solid Carbide Spiral Up-Cut Bit - 170-500C\u003c\/li\u003e\n\u003cli\u003e3\/8\" solid Carbide Spiral Up-Cut Bit - 173-500C\u003c\/li\u003e\n\u003cli\u003e7\/16\" solid Carbide Spiral Up-Cut Bit - 177C\u003c\/li\u003e\n\u003cli\u003e1\/2\" solid Carbide Spiral Up-Cut Bit - 180CL\u003c\/li\u003e\n\u003cli\u003eWooden bit storage box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Leigh Jigs","offers":[{"title":"Default Title","offer_id":50821656903962,"sku":"105707","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105707_FMT_Accessory_Kit.png?v=1760475086"},{"product_id":"leighvacuumandroutersupportford4rjig","title":"Vacuum \u0026 Router Support for Leigh Dovetail Jigs","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Vacuum \u0026amp; Router Support for Leigh Dovetail Jigs\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Leigh's\n   \u003cb\u003e\n    VRS Vacuum \u0026amp; Router Support\n   \u003c\/b\u003e\n   for the Leigh Dovetail Jigs puts dust collection functionality onto the jig, freeing your router from bulky hose connections. Along with dust collection, the VRS provides additional router support across the full width of the jig. Its thoughtful design moves up and down with the templates, so there's no re-positioning as stock thickness changes. A collector chute slides effortlessly under the support for super-efficient dust removal directly at the source. Two controller arms straddle the base of any router, moving the collector chute as you slide your router. Each VRS comes complete with two adapters to fit all popular vacuum hose sizes from 1\" to 2-1\/2\". Because the VRS is held in place by powerful rare earth magnets, it stays put during use, but comes off without tools (and even has a built-in hanger) when you want to flip or change templates.  Made from aluminum and tough ABS plastic.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Note:\n   \u003c\/b\u003e\n   The Vacuum \u0026amp; Router Support for the D4R Pro Dovetail Jig also fits the D4, D3, D1258R and D1258.  It fits pretty much every older 24\" Leigh jig and includes the appropriate mounting hardware.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Note:\n   \u003c\/b\u003e\n   The VRS for the Super 24 jig and the VRS for the D4R are not interchangeable.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Super 18 Jig","offer_id":50821660442906,"sku":"105728","price":129.0,"currency_code":"USD","in_stock":true},{"title":"Super 24 Jig","offer_id":50821660475674,"sku":"105729","price":139.0,"currency_code":"USD","in_stock":true},{"title":"D4R Pro Jig","offer_id":50821660508442,"sku":"105730","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105730.jpg?v=1751678737"},{"product_id":"leighsuper18jig","title":"Leigh Super Dovetail Jig","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   These dovetail jigs have all the great features you've come to expect from Leigh but at a lower price! They\n are available in\n   \u003c!--12\", --\u003e\n   18\" and 24\" models. Like previous Leigh versions, you can cut variably\n spaced through and half-blind dovetails in a variety of material sizes and thicknesses in two passes, or you\n can cut both sides of fixed spaced half-blinds at the same time.  Maximum board thickness for half-blind\n dovetails is 1\" and 13\/16\" for through dovetails. The\n   \u003cb\u003e\n    Super Jigs\n   \u003c\/b\u003e\n   also make sliding dovetails\n and 5\/16\" and 5\/8\" box joints right out of the package.  There's no additional template to buy. You can\n even fine-tune the fit of the fingers with Leigh's E-Bush template guide that adjusts in increments of .002\".\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Leigh's speed clamps provide a powerful grip, and make the finger assembly easier to slide and read.  There's\n even a handy on-board reference card with set up information, and a quick setup jig for box joints and half-blind\n dovetails that stores on the jig.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Included:\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Super Jig\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1\/2\" 8° dovetail bit\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1\/2\" 14° dovetail bit\n   \u003c\/li\u003e\n   \u003cli\u003e\n    5\/16\" straight bit\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1\/2\" to 8mm collet reducer\n   \u003c\/li\u003e\n   \u003cli\u003e\n    e7 guide bushing\n   \u003c\/li\u003e\n   \u003cli\u003e\n    cam-action speed clamps\n   \u003c\/li\u003e\n   \u003cli\u003e\n    sliding dovetail fence\n   \u003c\/li\u003e\n   \u003cli\u003e\n    square drive screwdriver (for adjusting the fingers)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    half-blind bridging material\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   With each size\n   \u003cb\u003e\n    Super Jig\n   \u003c\/b\u003e\n   you get: 1\/2\" 8° dovetail bit, 1\/2\" 14° dovetail bit, 5\/16\"\n straight bit, 1\/2\" to 8mm collet reducer, 7\/16\" template guide, cam-action speed clamps, sliding dovetail\n fence, square drive screwdriver (for adjusting the fingers), the new E-Bush and some half-blind bridging material.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Jig Versions and Packages\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The Leigh Super Dovetail Jigs are available in both inch and metric versions.  Both versions use the same template\n guides and routers bits and come with the same standard equipment. The only difference is that the Metric jig has\n guide scales graduated in millimieters.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   A Leigh Super Dovetail Jig can be purchased by itself or packaged\n with accessories at a savings.  You can add the Vacuum \u0026amp; Router Support(VRS) or the Accessory Kit which includes\n the VRS and 7-piece bit set.\n  \u003c\/p\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n  \u003ch3 style=\"background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\\library\\leigh chart.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/\\library\\leigh%20chart.pdf\"\u003e\n    Click here for the Leigh Template Guidebush System Selection Chart\n   \u003c\/a\u003e\n  \u003c\/p\u003e \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Inch \/ 24 inch - 61cm \/ Jig Only","offer_id":50821674762522,"sku":"105725","price":649.0,"currency_code":"USD","in_stock":true},{"title":"Inch \/ 24 inch - 61cm \/ With VRS","offer_id":50821674795290,"sku":"105719","price":719.0,"currency_code":"USD","in_stock":true},{"title":"Inch \/ 24 inch - 61cm \/ With Accessory Package","offer_id":50821674828058,"sku":"105720","price":819.0,"currency_code":"USD","in_stock":true},{"title":"Metric \/ 24 inch - 61cm \/ Jig Only","offer_id":50821674860826,"sku":"105756","price":649.0,"currency_code":"USD","in_stock":true},{"title":"Metric \/ 24 inch - 61cm \/ With VRS","offer_id":50821674893594,"sku":"105873","price":719.0,"currency_code":"USD","in_stock":true},{"title":"Metric \/ 24 inch - 61cm \/ With Accessory Package","offer_id":50821674926362,"sku":"105874","price":819.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105724_25bfd6fb-9456-47e7-a550-748b24a53d4b.jpg?v=1751679012"},{"product_id":"leighfmtlouverdoorguides","title":"Leigh FMT Louver Door Guides","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Leigh FMT Louver Door Guides\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Louvered doors and shutters always prove challenging to build. Now you can use your FMT to make precise louver doors with standard 1\/4\" x 1-1\/4\" louvers at a 45° angle. Matching tenons can be routed on the ends of louver stock or radiused louver stock can be routed to fit the mortise. Sold in left and right matching pairs.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Default Title","offer_id":50821737677082,"sku":"105486","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105486d.jpg?v=1768340948"},{"product_id":"leighfmtsetof4squaretenonguides","title":"Leigh Square Tenon Guides for the FMT Pro and Super FMT","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Now you can make traditional style tenons with your Leigh FMT Pro or Super FMT Jig. These guides allow you to route square cornered tenons to match any mortise length up to 5\". All square tenons are routed with a 1\/2\" spiral up-cut router bit.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Unlike standard FMT Joint Guides, square tenon guides make only the tenon, not the mortise.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Square tenon guides work with the FMT, FMT Pro \u0026amp; Super FMT.\n  \u003c\/p\u003e\n  \u003ctable class=\"hwpt\"\u003e\n   \u003ctr\u003e\n    \u003cth\u003e\n     Tenon Size\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Leigh #\n    \u003c\/th\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     1\/4\" x 3\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     670430\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     5\/16\" x 3\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     670530\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     3\/8\" x 3\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     670630\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     1\/2\" x 4\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     670830\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     Set of 4\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     670900\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/table\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"1\/4 inch by 3 inch","offer_id":50821737840922,"sku":"105477","price":41.0,"currency_code":"USD","in_stock":true},{"title":"5\/16 inch by 3 inch","offer_id":50821737873690,"sku":"105478","price":41.0,"currency_code":"USD","in_stock":true},{"title":"3\/8 inch by 3 inch","offer_id":50821737906458,"sku":"105479","price":41.0,"currency_code":"USD","in_stock":true},{"title":"1\/2 inch by 3 inch","offer_id":50821737939226,"sku":"105484","price":41.0,"currency_code":"USD","in_stock":true},{"title":"Set of 4","offer_id":50821737971994,"sku":"105485","price":135.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105485.jpg?v=1751682323"},{"product_id":"leigh-super-18-jig-accessory-kit","title":"Accessory Kit for Leigh Super Dovetail Jigs","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Accessory Kit for Leigh Super Dovetail Jigs\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Leigh Super Dovetail Jig Accessory Kit includes a Vacuum \u0026amp; Router Support(VRS) to fit your jig and the 7-piece router bit set to complement the Super jig.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The VRS mounts on the Super Jig and prvides upport for your router as you move it across the jigs.  In addition, iit has a dust collection port that moves with your router to collect dust as it's generated.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 7-bit set for the Super Dovetail Jig includes the following: 1\/4\" 8° dovetail bit, 5\/16\" 8° dovetail bit, 3\/8\" 8° dovetail bit, 7\/16\" 8° dovetail bit, 1\/2\" 10° dovetail bit, 1\/2\" 12° dovetail bit and 1\/2\" 18° dovetail bit. With the seven bits in this set and the 3 bits that come with the jig, you are equipped to make any joint within the Super Jig's capabilities. All bits are 8mm shank. A 1\/2\" to 8mm collet adapter is included with the jig.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Super 12 Dovetail Jig","offer_id":50821738201370,"sku":"105702","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Super 18 Dovetail Jig","offer_id":50821738234138,"sku":"105704","price":259.0,"currency_code":"USD","in_stock":true},{"title":"Super 24 Dovetail Jig","offer_id":50821738266906,"sku":"105705","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105702a.jpg?v=1751682328"},{"product_id":"leigh-d4rpro-jig-accessory-kit","title":"Accessory Kit for Leigh D4R Pro Jig","description":"\u003cbody\u003e\n\n  \u003cp\u003e   Leigh's VRS Vacuum \u0026amp; Router Support for the Leigh Dovetails Jigs puts dust collection\n  onto the jig, freeing your router from bulky hose connections. Along with dust collection, the\n  VRS provides additional router support across the full width of the jig. Its thoughtful design\n  moves up and down with the templates, so there's no repositioning as stock thickness changes.\n  A collector chute slides effortlessly under the support for super-efficient dust removal directly\n  at the source. Two controller arms straddle the base of any router, moving the collector chute as\n  you slide your router. Each VRS comes complete with two adapters to fit all popular vacuum hose\n  sizes from 1\" to 2-1\/2\". Because the VRS is held in place by powerful rare earth magnets, it\n  stays put during use, but comes off without tools (and even has a built-in hanger) when you\n  want to flip or change templates. Made from aluminum and tough ABS plastic.  \u003c\/p\u003e\n\n  \u003cp\u003eThe 12-piece Highland bit set complements the basic D4R bit selection. With it and standard\n  bits, you can make every dovetail joint possible with the D4R Pro. It is the equivalent of\n  Leigh's 2411-8 bit set and includes:\u003c\/p\u003e\n\n  \u003ctable class=\"hwpt\"\u003e\n   \u003ctbody\u003e\n    \u003ctr\u003e\n\t\t\u003cth\u003eLeigh Equivalent\u003c\/th\u003e\n\t\t\u003cth\u003eSize\u003c\/th\u003e\n\t\t\u003cth\u003eAngle\u003c\/th\u003e\n\t\t\u003cth\u003eShank\u003c\/th\u003e\n    \u003c\/tr\u003e\n\t\n    \u003ctr\u003e\n\t\u003ctd\u003e50-8\u003c\/td\u003e\n\t\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\t\u003ctd\u003e8°\u003c\/td\u003e\n\t\u003ctd\u003e8mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n\t\u003ctd\u003e60-8\u003c\/td\u003e\n\t\u003ctd\u003e5\/16\"\u003c\/td\u003e\n\t\u003ctd\u003e8°\u003c\/td\u003e\n\t\u003ctd\u003e8mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n\t\u003ctd\u003e70-8\u003c\/td\u003e\n\t\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\t\u003ctd\u003e8°\u003c\/td\u003e\n\t\u003ctd\u003e8mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n\t\u003ctd\u003e75-8\u003c\/td\u003e\n\t\u003ctd\u003e7\/16\"\u003c\/td\u003e\n\t\u003ctd\u003e8°\u003c\/td\u003e\n\t\u003ctd\u003e8mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n\t\u003ctd\u003e101-8\u003c\/td\u003e\n\t\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\t\u003ctd\u003e10°\u003c\/td\u003e\n\t\u003ctd\u003e8mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n\t\u003ctd\u003e112-8\u003c\/td\u003e\n\t\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\t\u003ctd\u003e12°\u003c\/td\u003e\n\t\u003ctd\u003e8mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n\t\u003ctd\u003e128-8\u003c\/td\u003e\n\t\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\t\u003ctd\u003e18°\u003c\/td\u003e\n\t\u003ctd\u003e8mm\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n\t\u003ctd\u003e90\u003c\/td\u003e\n\t\u003ctd\u003e11\/16\"\u003c\/td\u003e\n\t\u003ctd\u003e8°\u003c\/td\u003e\n\t\u003ctd\u003e1\/2\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n\t\u003ctd\u003e100\u003c\/td\u003e\n\t\u003ctd\u003e13\/16\"\u003c\/td\u003e\n\t\u003ctd\u003e8°\u003c\/td\u003e\n\t\u003ctd\u003e1\/2\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n\t\u003ctd\u003e150\u003c\/td\u003e\n\t\u003ctd\u003e7\/16\"\u003c\/td\u003e\n\t\u003ctd\u003eStraight\u003c\/td\u003e\n\t\u003ctd\u003e1\/2\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n\t\u003ctd\u003e160\u003c\/td\u003e\n\t\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\t\u003ctd\u003eStraight\u003c\/td\u003e\n\t\u003ctd\u003e1\/2\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n\t\u003ctd\u003e172-8\u003c\/td\u003e\n\t\u003ctd\u003e8mm\u003c\/td\u003e\n\t\u003ctd\u003eCollet Adapter\u003c\/td\u003e\n\t\u003ctd\u003e1\/2\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n   \u003c\/tbody\u003e\n  \u003c\/table\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Default Title","offer_id":50821738430746,"sku":"105706","price":359.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105704d.jpg?v=1768340951"},{"product_id":"leighfmty-axismortiseguide","title":"Leigh FMT Y-Axis Mortise Guide","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Leigh FMT Y-Axis Mortise Guide\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Some joints, like dust dividers in a chest of drawers, require mortises to be routed at 90° to the clamp plate. The new\n   \u003cb\u003e\n    Y-Axis Mortise Guide\n   \u003c\/b\u003e\n   can produce six sizes of mortises: 1\/4\" x 3\/8\", 1\/4\" x 1\/2\", 1\/4\" x 3\/4\", 5\/16\" x 1\/2\", 5\/16\" x 3\/4\" and 1\/2\" x 1\". Additional size mortises can be created using table limit stops and varying the bit size.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Default Title","offer_id":50821738594586,"sku":"105487","price":51.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105487_d7b8cded-279c-434f-b4fe-1512e7e3786e.jpg?v=1768340952"},{"product_id":"leighd4rbridgematerial","title":"Leigh Dovetail Jig Bridge Material","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Leigh Dovetail Jig Bridge Material\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Leigh bridge material is used to bridge the gap between the tail end of the guide fingers when routing half-blind dovetail tails. Bridge pieces are cut to size.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Material for the D4R ProDovetail Jigs is also used for earlier Models of 24\" Leigh Dovetail Jigs including: D4R, D4, D3 \u0026amp; D1258R. (Not the 24\" Super Jig.)\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Bridge material for the Leigh Super Jigs works with all three sizes (12\" 18\u0026amp;quot, \u0026amp; 24\") and also fits the D1600 Dovetail Jig.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"D4R Pro Dovetail Jig \/ 13 inch pieces - Pack of 2","offer_id":50821752226074,"sku":"105303","price":8.5,"currency_code":"USD","in_stock":true},{"title":"D4R Pro Dovetail Jig \/ 13 inch pieces - Pack of 6","offer_id":50821752258842,"sku":"105369","price":19.0,"currency_code":"USD","in_stock":true},{"title":"Super Jig and D1600 Jig \/ 20 inch piece","offer_id":50821752291610,"sku":"105466","price":8.5,"currency_code":"USD","in_stock":true},{"title":"Super Jig and D1600 Jig \/ 20 inch - Pack of 3","offer_id":50821752324378,"sku":"105462","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105303.jpg?v=1751682472"},{"product_id":"leighfmtsetof8hssbits","title":"Leigh Spiral solid Carbide Up-cut Bits for FMT Jigs - Set of 8","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Leigh Spiral solid Carbide Up-cut Bits for FMT Jigs - Set of 8\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Leigh's FMT bit sets include all the standard bits for the FMT, FMT Pro \u0026amp; Super FMT.\n   \u003c!--Solid Carbide(for more stiffness and edge life).--\u003e\n   Wooden storage box included.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   1\/4\" shank bits included are 1\/16\", 1\/8\", 3\/16\" diameter\n  \u003c\/p\u003e\n  \u003cp\u003e\n   1\/2\" shank bits included are 1\/4\", 5\/16\", 3\/8\", 7\/16\" \u0026amp; 1\/2\" diameter.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 1\/16\" bit is high speed steel because solid carbide is too brittle for that size.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Default Title","offer_id":50821757960474,"sku":"105740","price":437.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105739.jpg?v=1751682611"},{"product_id":"diykregjig","title":"Kreg K4 Pocket Hole Jig","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Kreg's unique pocket hole joinery systems greatly simplify cabinet and carcass construction. With a just\n a hand drill you can be assembling your own kitchen cabinets and furniture case projects, as well as\n constructing your own frame and panel doors.  Kreg's K4 pocket hole jig kit comes with a heavy\n duty glass reinforced plastic jig with 3 steel guides.  This drill guide inserts into a benchtop base\n and quickly adjusts incrementally for drilling in 1\/2\" to 1-1\/2\" thick material.  A toggle\n style locking clamp securely holds your stock to the jig.  The drilling guide can be removed from the\n base for drilling in hard to reach applications.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Includes\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Pocket-Hole Jig K4\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Dust collection adapter (connects to 1-1\/4\" dust hose)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Stepped drill bit\n   \u003c\/li\u003e\n   \u003cli\u003e\n    6\" square-drive bit\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Screw and plug sample pack\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Owner’s Manual\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"Default Title","offer_id":50821764972826,"sku":"124054","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/124054d.jpg?v=1768341035"},{"product_id":"kreg-blue-screw-kit","title":"Kreg Blue-Kote Pocket Hole Screw Kit","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kreg Blue Screw Kit\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Kreg's Blue-Kote Pocket Hole Screws have a Pocket-Hole™ washer head screw design which provides a large amount of surface area on the head of the screw ensuring the screw seats securely in the bottom of the pocket.  Kreg's three layer anti-corrosion coating  is rated 400% better than zinc-plated screws.\n   \u003cbr\u003e\n   \u003cbr\u003e\n   The Kreg Blue-Kote Pocket Hole Screw kit has 100 each of 1-1\/4\", 1-1\/2\", 2\" and quantity 150 of the 2-1\/2\" Coarse Blue-Kote weather resistant screws.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"Default Title","offer_id":50821765628186,"sku":"185454","price":53.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/185454.jpg?v=1751682783"},{"product_id":"leigh-finger-joint-template-d4rpro","title":"Leigh Finger Joint Templates","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Leigh Finger Joint Templates\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Finger joints (box joints) are strong, symmetrical glue joints for corner assemblies.  They don't have the mechanical strength of dovetails, but the large glue area provides for a strong joint.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Leigh's Finger Joint Templates are precision CNC machined from aluminum alloy. Each comb can be used to rout multiple sizes of finger joint, depending on setup. (See the charts below).\n  \u003c\/p\u003e\n  \u003cp\u003e\n   All three Finger Joint Templates are available in inch \u0026amp; metric versions. Metric Finger Joint jigs require metric router bits.  We do not carry metric router bits.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   The eBush Concept\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   Joint fit is easily and precisely controlled using Leigh's patented elliptical guidebushes. When rotated, the active diameter of the elliptical barrel increases or decreases, allowing more or less wood to be routed away. Fit adjustments, made with the included pin wrench, are possible in increments of .001\" up to a maximum of .020\". Perfect box joint fit is guaranteed.\n  \u003c\/p\u003e\n  \u003chr\u003e\n  \u003ch4\u003e\n   F3 Finger Joint Template for Leigh 24\" D-Series Dovetail Jigs\n  \u003c\/h4\u003e\n  \u003cp\u003e\n   The F3 template fits the D4R Pro, D4R, D4, D3, D1258R \u0026amp; D1258 dovetail jigs. It has three joint combs and can make 14 sizes of box joints (11 standard box joints and three half-blind). Work pieces are clamped vertically in the jig. Tails must be offset from sockets and this is accomplished by moving the template, not the work piece. As the template is shifted from one mode to another, a stainless steel locating pin locks the template precisely.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   F3 Features\n  \u003c\/h5\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Precision CNC machined aluminum alloy template\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Three comb sizes (5\/16\", 3\/8\", 1\/2\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    11 Different sizes of box joint —\n    \u003ca href=\"#f3chart\"\u003e\n     see chart below for sizes\n    \u003c\/a\u003e\n    \u003c!--3\/32\u0026quot;, 1\/8\u0026quot;, 5\/32\u0026quot;, 3\/16\u0026quot;, 1\/4\u0026quot;, 5\/16\u0026quot;, 3\/8\u0026quot;, 1\/2\u0026quot;, 5\/8\u0026quot;, 3\/4\u0026quot;, \u0026amp; 1\u0026quot;--\u003e\n   \u003c\/li\u003e\n   \u003cli\u003e\n    3 sizes of square half-blind box joints\n    \u003c!-- 5\/16\u0026quot;, 3\/8\u0026quot;, \u0026amp; 1\/2\u0026quot;.--\u003e\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Adjustable joint fit with included eBushes\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Fits all 24\" D4R Pro, D4R, D4, D3, D1258R \u0026amp; D1258 model dovetail jigs.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Maximum board thickness for the 5\/16 comb = .875\"(22mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Maximum board thickness for the 3\/8 comb = 1.000\" (25mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Maximum board thickness for the 1\/2 comb = 1.250\" (32mm)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   F3 Standard Equipment\n  \u003c\/h5\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Template\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Three Leigh eBushs (e7, e8 \u0026amp; e10)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Pin wrench for eBush adjustment\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Illustrated user guide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    5 year warranty\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ca name=\"f3chart\"\u003e\n  \u003c\/a\u003e\n  \u003cdiv style=\"text-align: center;\"\u003e\n   \u003cimg data-prev-url=\"\/productimages\/joinery\/Leigh\/leigh-f3-chart.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/Leigh\/leigh-f3-chart.jpg\"\u003e\n  \u003c\/div\u003e\n  \u003chr\u003e\n  \u003ch4\u003e\n   F18 \u0026amp; F24 Finger Joint Templates for Leigh Super Dovetail Jigs\n  \u003c\/h4\u003e\n  \u003cp\u003e\n   The F18 Finger Joint Template fits the Leigh Super 18 Dovetail Jig.  The F24 fits the Leigh Super 24 Dovetail Jig. Each has two joint combs and can make eight sizes of box joints (six standard box joints and two half-blind). Work pieces are clamped vertically in the jig. Tails must be offset from sockets and this is accomplished by moving the template, not the work piece. As the template is shifted from one mode to another, a stainless steel locating pin locks the template precisely.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   F18 \u0026amp; F24 Features\n  \u003c\/h5\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Precision CNC machined aluminum alloy template\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Two comb sizes (3\/8\", 1\/2\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    8 Different sizes of box joint —\n    \u003ca href=\"#f18chart\"\u003e\n     see chart below for sizes\n    \u003c\/a\u003e\n    \u003c!--3\/32\u0026quot;, 1\/8\u0026quot;, 3\/16\u0026quot;, 1\/4\u0026quot;, 5\/16\u0026quot;, 3\/8\u0026quot;, \u0026amp; 1\/2\u0026quot;--\u003e\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2 sizes of square half-blind box joints\n    \u003c!--3\/8\u0026quot;, \u0026amp; 1\/2\u0026quot;.--\u003e\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Adjustable joint fit with included eBushes\n   \u003c\/li\u003e\n   \u003cli\u003e\n    F18 attaches directly to Super 18 Dovetail Jig.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    F24 attaches directly to Super 24 Dovetail Jig.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Maximum board thickness for the 3\/8 comb = 1.000\" (25mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Maximum board thickness for the 1\/2 comb = 1.250\" (32mm)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   F18 \u0026amp; F24 Standard Equipment\n  \u003c\/h5\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Template\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Two Leigh eBushs (e8 \u0026amp; e10)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Pin wrench for eBush adjustment\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Illustrated user guide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    5 year warranty\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ca name=\"f18chart\"\u003e\n  \u003c\/a\u003e\n  \u003cdiv style=\"text-align: center;\"\u003e\n   \u003cimg data-prev-url=\"\/productimages\/joinery\/Leigh\/leigh-f18-f24-chart.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/Leigh\/leigh-f18-f24-chart.jpg\"\u003e\n  \u003c\/div\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Inch \/ F18","offer_id":50821807898906,"sku":"105709","price":239.0,"currency_code":"USD","in_stock":true},{"title":"Inch \/ F24","offer_id":50821807931674,"sku":"105710","price":259.0,"currency_code":"USD","in_stock":true},{"title":"Inch \/ F3","offer_id":50821807964442,"sku":"105815","price":269.0,"currency_code":"USD","in_stock":true},{"title":"Metric \/ F18","offer_id":50821807997210,"sku":"105845","price":239.0,"currency_code":"USD","in_stock":true},{"title":"Metric \/ F24","offer_id":50821808029978,"sku":"105846","price":259.0,"currency_code":"USD","in_stock":true},{"title":"Metric \/ F3","offer_id":50821808062746,"sku":"105816","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105815d.jpg?v=1768341368"},{"product_id":"kreg-automaxx-face-clamp","title":"Kreg Automaxx Face Clamp","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Kreg Automaxx Face Clamp\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Kreg has added Automaxx technology to the face clamp, making them more ergonomic and useful than ever before.\nAvailable in either 3\" or 6\" reach capacity, they automatically adjust\nto different workpiece thicknesses without the need for manual adjustment. They also feature\neasy-to-regulate clamping force that once set using a thumbscrew, is maintained each time you use them, regardless\nof the workpiece thickness.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 3\" face clamp handles workpieces up to 2-7\/8\" thick; the 6\" face\nclamp handles workpieces up to 4-1\/4\" thick.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"3in","offer_id":50821865963802,"sku":"124114","price":42.0,"currency_code":"USD","in_stock":true},{"title":"6in","offer_id":50821865996570,"sku":"124115","price":47.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/124114_3c74958d-de43-40a9-bed2-5b748d5bae03.jpg?v=1768341793"},{"product_id":"kreg-6in-hd-driver","title":"Kreg 6 inch Driver for HD Pocket Screws","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kreg 6 inch Driver for HD Pocket Screws\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The HD, heavy duty, driver is #3 Square drive bit 6\" long.  It is designed for use with the #14 screws used\n with the\n   \u003ca data-prev-url=\"\/Kreg-Jig-HD-Pocket-Hole-System.aspx\" href=\"\/products\/kreg-jig-hd-pocket-hole-system\"\u003e\n    Kreg HD Pocket Hole System\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003c!--\n\n6\" (152mm) driver with deep #3 square drive\nOptimized for use with Kreg Jig® HD Screws\nSolid, one-piece construction\nQuick-Change compatibility\nMagnetic tip\n\nDescription\n\n6\" (152mm) driver with deep #3 square drive. Optimized for use with Kreg Jig® HD Screws. All of our drivers feature a solid, one-piece construction, magnetic tip, and Kreg® Quick-Change Chuck compatibility for fast and easy bit changes.  \n\nSpecs\n\nFor Use With\t\nOptimized for use with Kreg Jig® HD Screws\n\nSize\t\n6\" (152mm) driver with deep #3 square drive\n\nShank\t\n1\/4\" (6mm) square drive\n\nIncludes\t\n(1) Kreg Jig® HD Driver Bit\n\n--\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"Default Title","offer_id":50821883494682,"sku":"185482","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/185482d.jpg?v=1768341898"},{"product_id":"highland-woodworking-router-bit-leigh","title":"Highland Woodworking 1\/2 inch Straight Router Bit - 1\/2 inch shank","description":"\u003cbody\u003e\n   \u003cimg alt=\"Highland Woodworking logo\" data-prev-url=\"\/productimages\/logos\/hw-logo-200-50.jpg\" height=\"50\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/logos\/hw-logo-200-50.jpg\" style=\"float:right;\" width=\"200\"\u003e\n  \u003cbr\u003e\n  \u003cbr\u003e\n  \u003cp\u003e\n   Our bits are made specifically to work with the Leigh Dovetail jigs. They are made to the same specifications as Leigh's bits. We have found them to be well-balanced, smooth-running bits that do their job without fuss. The degree of finish is impressive: brazes are clean, and the C2 carbide tips are polished to 600 grit. We guarantee that you'll be completely satisfied.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The thickness of the jig template requires a longer shank. Therefore, we recommend using the 8mm shank bits over the 1\/4\" shank bits because the increased shank diameter offers 60% more shaft strength.\n  \u003c\/p\u003e\n  \u003cbr\u003e\n  \u003chr\u003e\n  \u003cbr\u003e\n\n  \u003ctable class=\"hwpt\"\u003e\n   \u003ctr\u003e\n    \u003cth\u003e\n     Diameter\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Shank\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Angle\n    \u003c\/th\u003e\n    \u003cth\u003e\n     HW #\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Leigh\n     \u003cbr\u003e\n     Equivalent\n    \u003c\/th\u003e\n   \u003c\/tr\u003e\n\n   \u003ctr\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Straight\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     105330\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     160\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/table\u003e\n \n\u003c\/body\u003e","brand":"Highland Woodworking","offers":[{"title":"1\/2 inch \/ 1\/2 inch \/ Straight","offer_id":50821884707098,"sku":"105330","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105330.jpg?v=1751685199"},{"product_id":"leigh-pin-wrench-vgs","title":"Leigh Pin Wrench for the Variable Guidebush System","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Leigh Pin Wrench for the Variable Guidebush System\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement Leigh Pin Wrench for the Variable Guidebush System.  Leigh # 730V.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Default Title","offer_id":50821885624602,"sku":"105349","price":4.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105349-01d.jpg?v=1768341927"},{"product_id":"leigh-rtj400-router-table-dovetail-jig","title":"Leigh RTJ400 Router Table Dovetail Jig","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   Leigh's RTJ400 Router Table Dovetail Jig is a precision joinery jig that partners with your router table for unparalleled material handling ability and ease of use. As router tables have become an increasingly important tool in many small shops, it is a natural fit for Leigh to innovate a dovetail jig designed specifically for use on your router table.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The versatile RTJ400 is an excellent solution for accurate routing of through dovetails, single pass half-blind dovetails, and box jointswith built-in features for superior joint fit adjustment and an adjustable side stop for precise workpiecealignment.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Working as a precision clamping sled with fast acting cam clamps, the RTJ400 securely holds your stock, while being fully supported by your router table, as you slide the jig's CNC aircraft-grade aluminum template to reference on the included template guide mounted into your router table.  The elliptically designed template guide can be easily adjusted to tune your joint tightness to within athousandth of an inch. An adjustable sidestop built in to the jig allows precise board set-up and alignment of rabbeted half-blind dovetails for drawer fronts.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The jig comes with bits to make 1\/2\" wide through dovetails in stock up to 1\" thick, 1\/2\" half-blind dovetails, 3\/8\" \u0026amp; 3\/4\" box joints \u0026amp; 3\/8\" half-blind box joints.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   With the\n   \u003ca data-prev-url=\"\/accessory-kit-leigh-rtj400-dovetail-jig.aspx\" href=\"\/products\/accessory-kit-leigh-rtj400-dovetail-jig\" target=\"_blank\" title=\"Leigh DTJ400 Dovetail Jig Accessory Kit\"\u003e\n    Accessory Kit\n   \u003c\/a\u003e\n   , the RTJ400 makes 9 sizes of through dovetails in stock 1\/8\" to 1\" thick, 3 sizes of half-blind dovetails \u0026amp; 4 sizes of box\/finger joints in stock 1\/8\" to 1\" thick \u0026amp; up to 16\" wide. Though this jig has fixed spacing, it will cut half-pitch through dovetails \u0026amp; half-blind dovetails \u0026amp; create half-blind 3\/8\" finger joints.A fully-illustrated User Guide is included along with\n   \u003c!--an instructional DVD and--\u003e\n   five Quick Reference instructionstrips.\n  \u003c\/p\u003e\n  \u003cb\u003e\n   Standard Equipment\n  \u003c\/b\u003e\n  \u003cbr\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Nylon stop rod\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1\/8\" ball end hex key\n   \u003c\/li\u003e\n   \u003cli\u003e\n    e10 elliptical guide bushing\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Blockers, pack of 10\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Cutting Depth Gauge\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Dovetail bit – 1\/2\" x 13\/16\" x 8°\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Dovetail bit – 1\/2\" x 14°\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Straight bit – 1\/2\" x 1-1\/4\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Straight bit – 3\/8\" x 1-1\/4\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Illustrated User Guide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Quick Reference Instruction strips\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Four Cam-Action Speed-Clamps\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Adjustable Sidestop\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   To learn more, read Jeffrey Fleisher's Tool Review on the\n   \u003ca data-prev-url=\"\/woodworking-tips-1602feb\/toolreview\/leigh-router-table-jig-tool-review.html\" href=\"https:\/\/info.highlandwoodworking.com\/woodworking-tips-1602feb\/toolreview\/leigh-router-table-jig-tool-review.html\" target=\"_blank\" title=\"Leigh Router Table Jig - RTJ400 Tool Review\"\u003e\n    Leigh RTJ400 Router Table Dovetail Jig\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003chr\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    IMPORTANT NOTE:\n   \u003c\/strong\u003e\n   In order to use the RTJ400 Dovetail jig, your router table's router plate (that your router attaches to) MUST have an opening or a snap-in ring that is sized to accept a \"universal\" style template guide. (The universal-style template guide is based on the decades-old type guides made by Porter Cable and Black and Decker).  The opening should measure 1-3\/8\" in diameter, so it can accommodate Leigh's guide bushing that comes with the RTJ400 jig.\n   \u003cb\u003e\n    Kreg's Precision Router Table plate comes with an insert ring to accept the universal style template e10 guide bushing that Leigh provides with the RTJ400 Jig.\n   \u003c\/b\u003e\n   Router tables made by Festool are not designed for table mounted template guided routing.\n  \u003c\/p\u003e\n  \u003cbr\u003e\n  \u003cb\u003e\n   NOTE:\n  \u003c\/b\u003e\n  The RTJ400 jig is NOT compatible with the Bosch RA1181 and RA1171 Router Tables, because you cannot mount a universal style template guide into the tables.\n  \u003cdiv id=\"rtj400tg\"\u003e\n   \u003ca data-prev-url=\"\/productimages\/joinery\/leigh\/105881-plate-427-278.jpg\" href=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/leigh\/105881-plate-427-278.jpg\" target=\"_blank\"\u003e\n    \u003cimg alt=\"plate\" data-prev-url=\"\/productimages\/joinery\/leigh\/105881-plate-154-100.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/leigh\/105881-plate-154-100.jpg\"\u003e\n   \u003c\/a\u003e\n  \u003c\/div\u003e\n  \u003cbr\u003e\n  \u003cbr\u003e\n  \u003cp\u003e\n   The template guide mounting hole in your router table plate should look like this.\n  \u003c\/p\u003e\n  \u003cbr\u003e\n  \u003cbr\u003e\n  \u003cbr\u003e\n  \u003cdiv id=\"rtj400tg\"\u003e\n   \u003cimg alt=\"guide\" data-prev-url=\"\/productimages\/joinery\/leigh\/105881-guide-100-45.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/leigh\/105881-guide-100-45.jpg\"\u003e\n  \u003c\/div\u003e\n  \u003cbr\u003e\n  \u003cp\u003e\n   The template guide mounting hole in your router table should accept a template guide that looks like this (uses a threaded locking ring to hold the guide bushing into the router base).\n  \u003c\/p\u003e\n\u003c!--  \u003ch3 style=\" background:#D6CBB5; padding:2px 4px; font-size:13.33px;margin-top:30px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e--\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Default Title","offer_id":50821895225626,"sku":"105881","price":439.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105881d.jpg?v=1768342006"},{"product_id":"accessory-kit-leigh-rtj400-dovetail-jig","title":"Accessory Kit for Leigh RTJ400 Dovetail JIg","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Accessory Kit for Leigh RTJ400 Dovetail Jig\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003c!--\u003cp\u003eThe RTJ400 Accessory Kit comes with the accessories you need to make finger joints and half-pitch through dovetails with your RTJ400 Router Table Dovetail Jig.\u003c\/p\u003e\u003c\/p\u003e--\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Includes\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    1\/4\" 8° Dovetail Bit 8mm shank for through dovetails\n   \u003c\/li\u003e\n   \u003cli\u003e\n    5\/16\" 8° Dovetail Bit 8mm shank for through dovetails\n   \u003c\/li\u003e\n   \u003cli\u003e\n    3\/8\" 8° Dovetail Bit 8mm shank for through dovetails\n   \u003c\/li\u003e\n   \u003cli\u003e\n    7\/16\" 8° Dovetail Bit 8mm shank for through dovetails\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1\/2\" 12° Dovetail Bit 1\/2\" shank for half-blind dovetails\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1\/2\" 18° Dovetail Bit 1\/2\" shank for half-blind dovetails\n   \u003c\/li\u003e\n   \u003cli\u003e\n    5\/16\" Straight Bit 8mm shank for through dovetails\n   \u003c\/li\u003e\n   \u003cli\u003e\n    3\/16\" HSS Spiral Upcut Bit 1\/4\" shank for Box Joints\n   \u003c\/li\u003e\n   \u003cli\u003e\n    3\/32\" HSS Straight Bit 1\/4\" shank for Box Joints\n   \u003c\/li\u003e\n   \u003cli\u003e\n    e-Bush (e7) for Half Pitch Through Dovetails\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1\/2\" to 8mm collet reducer\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   \u003c!--\u003cli\u003e3\/8\u0026#34; HSS Spiral Upcut bit for Box Joints\u003c\/li\u003e\n\u003cli\u003e3\/8\u0026#34; Dovetail bit for Through Dovetails\u003c\/li\u003e\n\u003cli\u003e7\/16\u0026#34; Dovetail bit for Through Dovetails\u003c\/li\u003e\n\u003cli\u003e5\/16\u0026#34; Straight bit for Half Pitch Through Dovetails\u003c\/li\u003e\n, Incl, e7, 163, 166, 50-8, 60-8, 70-8, 75-8, 140-8, 112-500, 128-500, 172-8\n--\u003e\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Default Title","offer_id":50821895291162,"sku":"105882","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105882d.jpg?v=1768342007"},{"product_id":"leigh-gbs-guide-bushing-system-adapters","title":"Leigh GBS Guide Bushing System Adapters","description":"\u003cp\u003eGuide Bushings (or Template Guides) are integral to the Leigh Dovetail Jigs. The Guide Bushing mounts to the base of your router and guides it along the template so that it cuts the joint accurately.\u003c\/p\u003e\n\u003cp\u003eUnfortunately, router manufacturers use many different systems for mounting guide bushings. Leigh's current system is based on the most common system - Porter-Cable style or \"universal\" guide bushings. \u003ca href=\"#moreinfo\" style=\"font-weight: bold; color: black;\"\u003e (Some older Leigh jigs used a proprietary guide bushing system. See below for more info.) \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to use Leigh dovetail jigs, you will need an adapter to mount the appropriate Leigh guide bushing to your router. Leigh offers a wide range of adapters to fit most routers. See the chart below for a fit guide to some routers commonly used in North America.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cb\u003e Don't see your router in the chart below? \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003ePlease check the \u003ca data-prev-url=\"\/library\/leigh_gb_and_adaptor_chart.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/leigh_gb_and_adaptor_chart.pdf\" style=\"font-weight: bold; color: #660000;\" target=\"_blank\"\u003e Leigh Guide Bushing and Adapter Selection Chart \u003c\/a\u003e (PDF) for assistance in selecting the correct adapter, especially if you are not in North America.\u003c\/p\u003e\n\n\n\u003ctable class=\"hwpt\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c!--image--\u003e\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003cth width=\"55\"\u003eLeigh #\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"imgcell\"\u003e\u003cimg alt=\"\" data-prev-url=\"\/ProductImages\/joinery\/leigh\/leigh-702-100.jpg\" height=\"100\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/leigh-702-100.jpg\" width=\"100\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003e Bosch \u003c\/b\u003e : 1611, 1611EVS, 1615, 1615EVS, B1550, GOF1600, GOF1700ACE \u003cbr\u003e\u003cb\u003e Sears Craftsman \u003c\/b\u003e : Plunge routers(except 135275070) \u003cbr\u003e\u003cb\u003e Ryobi \u003c\/b\u003e R600, R601, RR600, RE601\u003c\/td\u003e\n\u003ctd\u003e702\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"imgcell\"\u003e\u003cimg alt=\"\" data-prev-url=\"\/ProductImages\/joinery\/leigh\/leigh-703-100.jpg\" height=\"100\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/leigh-703-100.jpg\" width=\"100\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003e Hitachi \u003c\/b\u003e : TR8, TR12, FM8, M8, M12 Series \u003cbr\u003e\u003cb\u003e Makita \u003c\/b\u003e : 3600, 3606,3608, 3612, 3612B, 3612BR, 3612C, 3620, 3621, RP0900, RP0900K \u003cbr\u003e\u003cb\u003e Ryobi \u003c\/b\u003e R30, R50, R150, R151, RE155, R500, R501, R502\u003c\/td\u003e\n\u003ctd\u003e703\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"imgcell\"\u003e\u003cimg alt=\"\" data-prev-url=\"\/ProductImages\/joinery\/leigh\/leigh-710-100.jpg\" height=\"100\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/leigh-710-100.jpg\" width=\"100\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003e Trend \u003c\/b\u003e : T3, T4, T5, T9, T10, T11 – UniBase required\u003c\/td\u003e\n\u003ctd\u003e710\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"imgcell\"\u003e\u003cimg alt=\"\" data-prev-url=\"\/ProductImages\/joinery\/leigh\/leigh-702r-100.jpg\" height=\"100\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/leigh-702r-100.jpg\" width=\"100\"\u003e\u003c\/td\u003e\n\u003ctd\u003eUsed primarily on routers sold in Europe. \u003cbr\u003e\u003ca href=\"#moreinfo\" style=\"font-weight: bold; color: #660000;\"\u003e See Leigh Guide Bushing and Adaptor Selection Chart. \u003c\/a\u003e\n\u003c\/td\u003e\n\u003ctd\u003e702R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"imgcell\"\u003e\u003cimg alt=\"\" data-prev-url=\"\/ProductImages\/joinery\/leigh\/leigh-705r-100.jpg\" height=\"100\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/leigh-705r-100.jpg\" width=\"100\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cb\u003e Festool \u003c\/b\u003e : OF2000, OF2000E\u003c\/td\u003e\n\u003ctd\u003e705R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c!--\u003ctr class=\"alt\"\u003e\n\u003ctd style=\"background-color: white;\"\u003e\u003cimg alt=\"\" data-prev-url=\"\/ProductImages\/joinery\/leigh\/leigh-706r-100.jpg\" height=\"100\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/leigh-706r-100.jpg\" width=\"100\"\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cb\u003e Makita \u003c\/b\u003e : RP0910, RP1110C \u003cbr\u003e\u003cb\u003e Ryobi \u003c\/b\u003e : R160, R161, R162, R163K, R165, R170, R175, RE175, R180, R180PL, R181, R185, ERT1150\u003c\/td\u003e\n\u003ctd\u003e706R\u003c\/td\u003e\n\u003c\/tr\u003e--\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e\n\u003cp\u003e\u003ca data-prev-url=\"\/library\/leigh_gb_and_adaptor_chart.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/leigh_gb_and_adaptor_chart.pdf\" target=\"_blank\"\u003e \u003cimg data-prev-url=\"\/ProductImages\/joinery\/leigh\/leigh-guide-adapter-chart-83-115.jpg\" height=\"115\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/joinery\/leigh\/leigh-guide-adapter-chart-83-115.jpg\" width=\"83\"\u003e Leigh Guide Bushing and Adaptor Selection Chart \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e Older Leigh Dovetail Jigs \u003c\/b\u003e - Leigh previously used a proprietary guide bushing system. If you have an older jig, some of these adapters are compatible with the older system, some not. You can use the current Leigh guide bushings with older jigs. If you're not sure, call before you order.\u003c\/p\u003e","brand":"Leigh Jigs","offers":[{"title":"702","offer_id":50821927371034,"sku":"702","price":30.5,"currency_code":"USD","in_stock":true},{"title":"703","offer_id":50821927403802,"sku":"703","price":28.5,"currency_code":"USD","in_stock":true},{"title":"710","offer_id":50821927436570,"sku":"105400","price":30.5,"currency_code":"USD","in_stock":true},{"title":"702R","offer_id":50821927502106,"sku":"105701","price":41.0,"currency_code":"USD","in_stock":true},{"title":"705R","offer_id":50821927534874,"sku":"105388","price":30.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/leigh-gbs-adapters-d.jpg?v=1759505699"},{"product_id":"leigh-guide-bushing","title":"Leigh Guide Bushings","description":"\u003cdiv style=\"float:right;\"\u003e\n\u003cimg alt=\"Leigh Guide Bushing\" data-prev-url=\"\/productimages\/joinery\/leigh\/leigh-guide-bushing-160-187.jpg\" height=\"187\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/leigh\/leigh-guide-bushing-160-187.jpg\" width=\"160\"\u003e\n \u003cbr\u003eLeigh Guide Bushing\u003c\/div\u003e\n\n\u003cp\u003eThe guide bushing (also known as a template guide) is the primary link between your router and every Leigh joinery\n template. The guide bushing guides the movement of your router to insure you make a tight joint.\u003c\/p\u003e\n\n\u003cp\u003eLeigh's current guide bushings are based on the \"universal\" (or Porter-Cable style) guides used by many routers.\n Unfortunately, many router manufacturers use their own guide bushing systems. If your router doesn't use this style\n of guide bushing, you'll need to get a \u003ca data-prev-url=\"\/leigh-gbs-guide-bushing-system-adapters.aspx\" href=\"\/products\/leigh-gbs-guide-bushing-system-adapters\"\u003e\n guide bushing adapter \u003c\/a\u003e to mount it to your router.\u003c\/p\u003e\n\n\u003cp\u003eMilling operations with Leigh dovetail jigs use the first five bushings listed below: e7, e8, e10, 711C \u0026amp; 716C.\n We also stock some older and specialty bushings.\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003e Please Note \u003c\/b\u003e : These guide bushings are not used with the Leigh Isoloc templates or with the F1600 Finger \nJoint Template. Those templates use the Leigh Variable Guide bushings (VGS).\u003c\/p\u003e\n\n\u003ctable class=\"hwpt\"\u003e\n\u003ctbody\u003e\n\t\u003ctr\u003e\n\t\t\u003cth\u003e\u003c!--image--\u003e\u003c\/th\u003e\n\t\t\u003cth\u003eApplication\u003c\/th\u003e\n\t\t\u003cth style=\"white-space: nowrap;\"\u003eLeigh #\u003c\/th\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\n\u003cimg alt=\"e7 Elliptical Guide Bushing\" data-prev-url=\"\/productimages\/joinery\/Leigh\/e7-100-65.jpg\" height=\"65\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/Leigh\/e7-100-65.jpg\" width=\"100\"\u003e \u003cbr\u003e~7\/16\" \u003cbr\u003eElliptical\u003c\/td\u003e\n\t\t\u003ctd\u003e\n\t\t\t\u003cul\u003e\n\t\t\t\t\u003cli\u003eStandard equipment with D4R, Super 12, Super 18 \u0026amp;amp Super 24 Dovetail Jigs, F3 \u0026amp; F3M Finger Joint Templates.\u003c\/li\u003e\n\t\t\t\t\u003cli\u003eUsed to make some joints with the RTJ400 \u0026amp; R9plus jigs(not standard equipment).\u003c\/li\u003e\n\t\t\t\t\u003cli\u003eUsed to rout through, half-blind, single pass half-blind and sliding dovetails with 1\/4\" \u0026amp; 8mm shank router bits.\u003c\/li\u003e\n\t\t\t\t\u003cli\u003eElliptical design allows for precise joint adjustment.\u003c\/li\u003e\n\t\t\t\u003c\/ul\u003e\n\t\t\u003c\/td\u003e\n\t\t\u003ctd\u003ee7\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\n\u003cimg alt=\"e8 Elliptical Guide Bushing\" data-prev-url=\"\/productimages\/joinery\/Leigh\/e8-100-68.jpg\" height=\"68\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/Leigh\/e8-100-68.jpg\" width=\"100\"\u003e \u003cbr\u003e~1\/2\" \u003cbr\u003eElliptical\u003c\/td\u003e\n\t\t\u003ctd\u003e\n\t\t\t\u003cul\u003e\n\t\t\t\t\u003cli\u003eStandard equipment with F18, F24, F3 \u0026amp;amp, F3M Finger Joint templates.\u003c\/li\u003e\n\t\t\t\t\u003cli\u003eElliptical design allows for precise joint adjustment.\u003c\/li\u003e\n\t\t\t\u003c\/ul\u003e\n\t\t\u003c\/td\u003e\n\u003ctd\u003ee8\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\n\u003cimg alt=\"e10 Elliptical Guide Bushing\" data-prev-url=\"\/productimages\/joinery\/Leigh\/e10-100-79.jpg\" height=\"79\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/Leigh\/e10-100-79.jpg\" width=\"100\"\u003e \u003cbr\u003e~5\/8\" \u003cbr\u003eElliptical\u003c\/td\u003e\n\t\t\u003ctd\u003e\n\t\t\t\u003cul\u003e\n\t\t\t\t\u003cli\u003eStandard equipment with RTJ400 \u0026amp; R9plus Dovetail Jigs and F18, F24, F3 \u0026amp;amp, F3M Finger Joint templates.\u003c\/li\u003e\n\t\t\t\t\u003cli\u003eElliptical design allows for precise joint adjustment.\u003c\/li\u003e\n\t\t\t\u003c\/ul\u003e\n\t\t\u003c\/td\u003e\n\t\t\u003ctd\u003ee10\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\n\u003cimg alt=\"711C Guide Bushing\" data-prev-url=\"\/productimages\/joinery\/Leigh\/711c-100-69.jpg\" height=\"69\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/Leigh\/711c-100-69.jpg\" width=\"100\"\u003e \u003cbr\u003e7\/16\" \u003cbr\u003eStandard\u003c\/td\u003e\n\t\t\u003ctd\u003e\n\t\t\t\u003cul\u003e\n\t\t\t\t\u003cli\u003eExact replacement for the 711TP guide bushing which was standard equipment on D4R (2009 and earlier), D4, D3 and D1600 Dovetail Jigs.\u003c\/li\u003e\n\t\t\t\t\u003cli\u003eUsed when routing dovetail joints with 1\/4\" \u0026amp; 8mm shank bits on D4R D4, D3, D1600, \u0026amp; D1258 Dovetail jigs.\u003c\/li\u003e\n\t\t\t\u003c\/ul\u003e\n\t\t\u003c\/td\u003e\n\t\t\u003ctd\u003e711C\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\n\u003cimg alt=\"716C Guide Bushing\" data-prev-url=\"\/productimages\/joinery\/Leigh\/716c-100-68.jpg\" height=\"68\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/Leigh\/716c-100-68.jpg\" width=\"100\"\u003e \u003cbr\u003e5\/8\" \u003cbr\u003eStandard\u003c\/td\u003e\n\t\t\u003ctd\u003e\n\t\t\t\u003cul\u003e\n\t\t\t\t\u003cli\u003eExact replacement for the 716TP guide bushing, which was optional for use on Leigh D4R (2009 and earlier), D4, D3 and D1600 Dovetail Jigs.\u003c\/li\u003e\n\t\t\t\t\u003cli\u003eUsed routing dovetail joints with 1\/2\" bits on D4R D4, D3, D1600, \u0026amp; D1258 Dovetail jigs. (Large through dovetails.)\u003c\/li\u003e\n\t\t\t\t\u003cli\u003eUsed with the M2 Multiple Mortise and Tenon Attachment for the D4R, D4 \u0026amp; D3 jigs.\u003c\/li\u003e\n\t\t\t\u003c\/ul\u003e\n\t\t\u003c\/td\u003e\n\n\t\t\u003ctd\u003e716C\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\n\u003cimg alt=\"709 Leigh Guide Bushing\" data-prev-url=\"\/productimages\/joinery\/Leigh\/709-100-52.jpg\" height=\"52\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/Leigh\/709-100-52.jpg\" width=\"100\"\u003e \u003cbr\u003e3\/8\" \u003cbr\u003eLeigh \u003cbr\u003eProprietary\u003c\/td\u003e\n\t\t\u003ctd\u003e\n\t\t\t\u003cul\u003e\n\t\t\t\t\u003cli\u003eFor general template routing, not for use on Leigh Jigs.\u003c\/li\u003e\n\t\t\t\t\u003cli\u003e\u003cb\u003e Fits adapters 702 and 703 only. \u003c\/b\u003e\u003c\/li\u003e\n\t\t\t\u003c\/ul\u003e\n\t\t\u003c\/td\u003e\n\t\t\u003ctd\u003e709\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\n\u003cimg alt=\"719 Leigh Guide Bushing\" data-prev-url=\"\/productimages\/joinery\/Leigh\/709-100-52.jpg\" height=\"52\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/Leigh\/709-100-52.jpg\" width=\"100\"\u003e \u003cbr\u003e3\/4\" \u003cbr\u003eLeigh \u003cbr\u003eProprietary\u003c\/td\u003e\n\t\t\u003ctd\u003e\n\t\t\t\u003cul\u003e\n\t\t\t\t\u003cli\u003eFor general template routing, not for use on Leigh Jigs.\u003c\/li\u003e\n\t\t\t\t\u003cli\u003e\u003cb\u003e Fits adapters 702 and 703 only. \u003c\/b\u003e\u003c\/li\u003e\n\t\t\t\u003c\/ul\u003e\n\t\t\u003c\/td\u003e\n\t\t\u003ctd\u003e719\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n","brand":"Leigh Jigs","offers":[{"title":"e7","offer_id":50821927928090,"sku":"105746","price":23.5,"currency_code":"USD","in_stock":true},{"title":"e8","offer_id":50821927960858,"sku":"105747","price":23.5,"currency_code":"USD","in_stock":true},{"title":"e10","offer_id":50821927993626,"sku":"105748","price":23.5,"currency_code":"USD","in_stock":true},{"title":"711C","offer_id":50821928026394,"sku":"105883","price":23.5,"currency_code":"USD","in_stock":true},{"title":"716C","offer_id":50821928059162,"sku":"105884","price":23.5,"currency_code":"USD","in_stock":true},{"title":"709","offer_id":50821928091930,"sku":"709","price":13.99,"currency_code":"USD","in_stock":true},{"title":"719","offer_id":50821928124698,"sku":"719","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/leigh-guide-bushing_96f7822f-540c-418e-bf4e-5152b425c275.jpg?v=1768342163"},{"product_id":"david-barron-magnetic-dovetail-saw-guide","title":"David Barron Magnetic Dovetail Saw Guide","description":"\u003cp\u003eMagnetic Dovetail Saw Guides make it easier than ever to achieve perfect dovetails with your handsaw. Using powerful rare earth magnets covered with a low friction membrane, these dovetail saw guides by David Barron securely hold the blade of your dovetail saw at the desired angle as you hand cut your dovetails. The guide enables you to cut closer to your layout lines, straight and true for each cut, which means you will spend less time having to pare away material with a chisel to obtain a good fit.\u003c\/p\u003e\n\u003cp\u003eThe jig lets you cut the pins and tails for both through and half-blind dovetails. Made in Canada from anodized aluminum, there are 5 models (angles) available. The steeper angles are often used with softwoods, while the shallow angles are for hardwoods, but in essence the angle (sometimes called slope) you choose is really just a personal preference.\u003c\/p\u003e\n\u003cp\u003eIn use, the guide stands 1-1\/8\" above your work and will reduce your saw's overall cutting depth ability accordingly. The guide works well with almost any type of backsaw with a large enough blade. In his video, David Barron recommends the smooth-cutting \u003ca data-prev-url=\"\/gyokucho-rip-dozuki-saw-372.aspx\" href=\"\/products\/gyokucho-rip-dozuki-saw-372\" target=\"_blank\"\u003e \u003cb\u003e Gyokucho 372 Japanese Dovetail Saw\u003c\/b\u003e\u003c\/a\u003e, which features impulse-hardened teeth for long-lasting sharpness.\u003c\/p\u003e\n\u003cp\u003eFive Dovetail Saw Guide models are available for cutting dovetails in your choice of angles:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel 1:4\u003c\/li\u003e\n\u003cli\u003eModel 1:5\u003c\/li\u003e\n\u003cli\u003eModel 1:6 (most popular)\u003c\/li\u003e\n\u003cli\u003eModel 1:7\u003c\/li\u003e\n\u003cli\u003eModel 1:8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n\u003ch6 style=\"font-weight: bold;\"\u003eMagnetic Dovetail Guide Instructions (included in the box with the guide)\u003c\/h6\u003e\n\u003cp\u003eThank you for purchasing one of my Dovetail Guides. This simple guide will enable you to cut straight, at the same angle and most importantly, square. To see the guide in action please visit www.youtube.com and search for ‘Hand Cut Dovetails Made Easy’. I have produced lots of other You Tube videos, which you may find interesting. The guides are produced in angles 1:4, 1:5, 1:6, 1:7 and 1:8 which should cover most people’s requirements. There is also a useful 90 degree guide.\u003c\/p\u003e\n\u003cp\u003eThe saw blade is guided by a recessed magnet which makes sure that the blade stays absolutely straight both horizontally as well as vertically. The jig is face with a special low friction material, which allows the saw to slide smoothly. Over time these pads may become scratched which shouldn’t affect accuracy but I've included a spare pair with each guide.\u003c\/p\u003e\n\u003cp\u003eThere are two strips of abrasive, which hold the saw in your chosen position, whilst allowing easy small adjustments. After much use you may wish to replace these, any coarse self-adhesive sand paper will work fine.\u003c\/p\u003e\n\u003cp\u003eThe guide will work with any saw with a good depth of cut, the guide will reduce a saws cutting depth by 28 mm (1 1\/8\"). The saw I recommend and sell, is made by Gyokucho and is model 372, this cuts hardwood effortlessly and the super hard steel blade will last a very long time. Japanese saws with cross cut teeth (as most are) will do the job but cut very much more slowly.\u003c\/p\u003e\n\u003cp\u003eThe following instructions are for cutting through dovetails although half blind or lapped dovetails can be cut just as easily. The process shows the tails being cut first but the guide works equally well for cutting the pins first (for all you old timers!).\u003c\/p\u003e\n\u003ch6 style=\"font-weight: bold; color: #660000;\"\u003eCutting the Tails\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eScribe a line all the way round to the thickness of the mating pin board. A good quality wheel-marking gauge is easiest and can be rolled round the corners.\u003c\/li\u003e\n\u003cli\u003eMark out the dovetails on both sides to your desired spacing (after some practice you will realize that only the square marks across the end grain are necessary).\u003c\/li\u003e\n\u003cli\u003eLine up the magnetic jig with the lines sloping from top right to bottom left and cut down to the scribe line (this is a natural stance for a right hander). Then turn the work in the vice and cut the remaining lines. Again the stance is comfortable and you can also see the cut made earlier.\u003c\/li\u003e\n\u003cli\u003eRemove the waste with a jewelers saw and pare down to the scribe line.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch6 style=\"font-weight: bold; color: #660000;\"\u003eCutting the Pins\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eScribe a line to the thickness of the tailpiece. Do both edges, not the sides.\u003c\/li\u003e\n\u003cli\u003ePosition the tailboard evenly over the pin board in the vice and carefully mark the pins with a sharp marking knife. In time you will realize that only the outer part of these lines is necessary as the jig takes care of the angle. A heavier cut with the knife on the corner will help to locate the saw.\u003c\/li\u003e\n\u003cli\u003eCut down to the scribe line on the waste side. Remove the waste with a jewellers saw and pare down to the scribe line.\u003c\/li\u003e\n\u003cli\u003eTest fit a short way down. If all is ok add glue and tap the joint home.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Veritas Tools","offers":[{"title":"1 to 4 - 14°","offer_id":50821937004826,"sku":"135751","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1 to 5 - 11°","offer_id":50821937037594,"sku":"135752","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1 to 6 - 9.5°","offer_id":50821937070362,"sku":"135753","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1 to 7 - 8°","offer_id":50821937135898,"sku":"135754","price":50.0,"currency_code":"USD","in_stock":true},{"title":"1 to 8 - 7°","offer_id":50821937168666,"sku":"135755","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/135754_SawGuide_Action.png?v=1757276356"},{"product_id":"david-barron-magnetic-guide","title":"David Barron Magnetic Saw Guide","description":"\u003cp\u003eThese clever guides make it easier than ever to achieve perfect joinery cuts with your handsaw. The guides feature powerful magnets that secure your handsaw's blade at the proper angle while you are executing your cut. They're manufactured in Canada using rigid anodized aluminum and rare earth magnets.\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003e 90 Degree Guide \u003c\/b\u003e is designed to accurately control your cut when you wish to saw precisely at a right angle. It's excellent for cutting shoulders, tenon cheeks and finger joints.\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003e 45 Degree Guide \u003c\/b\u003e steers your saw blade correctly for miters, picture frames, moldings, trim, and wherever else you need a precise 45 degree cut.\u003c\/p\u003e","brand":"Veritas Tools","offers":[{"title":"90°","offer_id":50821937365274,"sku":"135757","price":50.0,"currency_code":"USD","in_stock":true},{"title":"45°","offer_id":50821937398042,"sku":"135758","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/135757d_3cb629ca-683e-489a-a182-ab0b11914134.jpg?v=1768342206"},{"product_id":"kreg-hd-pocket-screws","title":"Kreg HD Pocket Screws","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Kreg HD Pocket Screws\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   HD Pocket Screws are for use with the\n   \u003ca data-prev-url=\"\/kreg-jig-hd-pocket-hole-system.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/kreg-jig-hd-pocket-hole-system.aspx\"\u003e\n    Kreg Jig HD Pocket-Hole System\n   \u003c\/a\u003e\n   and the\n   \u003ca data-prev-url=\"\/kreg-pocket-hole-jig-xl.aspx\" href=\"\/products\/kreg-pocket-hole-jig-xl\"\u003e\n    Kreg Pocket Hole Jig XL\n   \u003c\/a\u003e\n   .\n They are #14 x 2-1\/2\u0026amp;quot and #12 x 4\" hardened steel with Protec-Kote finish for corrosion protection and long term moisture resistance.\n These screws require a #3 square driver.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The #14 x 2-1\/2\" screws come in packages of 30 and 125. The #12 x 4\" screws come in packs of 30 and 75. The extra-long #12 screws are perfect for building outdoor projects with 3 1\/2\" and larger boards.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   2 1\/2\" for 2x4 boards and 4\" for 4x4 boards.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"2-1\/2 inch - Pack of 30","offer_id":50821959680282,"sku":"185483","price":10.75,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 inch - Pack of 125","offer_id":50821959713050,"sku":"185484","price":37.0,"currency_code":"USD","in_stock":true},{"title":"4 inch - Pack of 30","offer_id":50821959745818,"sku":"185494","price":16.25,"currency_code":"USD","in_stock":true},{"title":"4 inch - Pack of 75","offer_id":50821959778586,"sku":"185495","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/kreg-hd-screws-d_48470d6c-773d-43e3-a490-975e301e1fd7.jpg?v=1768342307"},{"product_id":"kreg-zinc-pocket-hole-screws","title":"Kreg Zinc Pocket Hole Screws","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   Kreg's zinc screws are the standard choice for pocket hole joints in indoor furniture. They are made from case hardened steel for durablility and strength. The screw tips are sharp and self-tapping so they can drive into wood without a pilot hole.\n The underside of the head is flat so it mates perfectly with the base of the pocket hole - unlike drywall screws.\n  \u003c\/p\u003e\n  \u003cdiv style=\"float:right;\"\u003e\n   \u003cimg alt=\"Kreg Screw Heads\" data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-screw-heads-150-80.jpg\" height=\"80\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-screw-heads-150-80.jpg\" width=\"150\"\u003e\n   \u003cbr\u003e\n   Maxi-Loc \u0026amp; Pan Heads\n  \u003c\/div\u003e\n  \u003ch5\u003e\n   Screw Types\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   Kreg's screws come in two head styles: Maxi-Loc and Pan Head. Maxi-Loc screws are Kreg's washer-head design.  It gives the broadest bearing area and the surest hold.  Pan head screws have a slightly smaller head, without the built-in washer.\n They are used for joints in thinner stock and very hard woods.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Coarse thread\n   \u003c\/strong\u003e\n   Kreg screws have deep threads that cut into softwoods and sheet goods for maximum grip.  They should be used in basswood, spruce, fir, cedar, pine, MDF, plywood \u0026amp; particle board.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Fine thread\n   \u003c\/strong\u003e\n   Kreg screws are smaller so they can drive into hard woods without splitting, but they have more threads per inch to insure sufficient hold. They should be used in mahogany, cherry, maple, poplar, birch,\n ash, oak \u0026amp; hickory.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Kreg offers screws in six lengths from 3\/4\" to 2-1\/2\". See the\n   \u003ca href=\"#chart\"\u003e\n    chart\n   \u003c\/a\u003e\n   below for help selecting the correct length for your application.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Kreg screws have self-tapping tips so they drive easily and without splitting. They use\n   \u003cstrong\u003e\n    square drive\n   \u003c\/strong\u003e\n   for positive connection and easy driving. These screws use\n   \u003ca data-prev-url=\"\/kregdriverbits3and6.aspx\" href=\"\/products\/kregdriverbits3and6\"\u003e\n    # 2 square drivers\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003cp\u003e\n   If you're making furniture for outdoors, check out Kreg's\n   \u003ca data-prev-url=\"\/kreg-blue-kote-pocket-hole-screws.aspx\" href=\"\/products\/kreg-blue-kote-pocket-hole-screws\"\u003e\n    Blue Kote\n   \u003c\/a\u003e\n   or\n   \u003ca data-prev-url=\"\/kreg-stainless-steel-pocket-hole-screws.aspx\" href=\"\/products\/kreg-stainless-steel-pocket-hole-screws\"\u003e\n    Stainless Steel\n   \u003c\/a\u003e\n   screws.\n  \u003c\/p\u003e\n  \u003ca name=\"chart\"\u003e\n  \u003c\/a\u003e\n  \u003ctable class=\"hwpt\"\u003e\n   \u003ctr\u003e\n    \u003cth\u003e\n     Screw Type\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Length\n    \u003c\/th\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 3\/4 inch - Fine - Pan Head--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sps-f075-150-77.jpg\" height=\"77\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sps-f075-150-77.jpg\" width=\"150\"\u003e\n      \u003cp\u003e\n       For material 1\/2\" thick Kreg # SPS-F075\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Fine for Hardwoods\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Pan Head\n      \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd rowspan=\"1\"\u003e\n     \u003cspan\u003e\n      3\/4\"\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n\n   \u003c!-- 3\/4 inch - Fine - Pan Head--\u003e\n   \u003c!-- 1 inch - Coarse - Pan Head--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sps-c1-150-78.jpg\" height=\"78\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sps-c1-150-78.jpg\" width=\"150\"\u003e\n      \u003cp\u003e\n       For material 5\/8\" thick Kreg # SPS-C1\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Coarse for Softwoods\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Pan Head\n      \u003c\/p\u003e\n     \n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cspan\u003e\n      1\"\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n    \u003c\/tr\u003e\n   \u003c!-- 1 inch - Coarse - Pan Head--\u003e\n   \u003c!-- 1 inch - Coarse - Maxi-Loc--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-c1-150-90.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-c1-150-90.jpg\"\u003e\n      \u003cp\u003e\n       For material 5\/8\" thick Kreg # SML-C1\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Coarse for Softwoods\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Maxi-Loc Head\n      \u003c\/p\u003e\n     \n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cspan\u003e\n      1\"\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 1 inch - Coarse - Maxi-Loc--\u003e\n   \u003c!-- 1 inch - Fine - Pan Head--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sps-f1-150-77.jpg\" height=\"77\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sps-f1-150-77.jpg\" width=\"150\"\u003e\n      \u003cp\u003e\n       For material 5\/8\" thick Kreg # SPS-F1\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Fine for Hardwoods\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Pan Head\n      \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cspan\u003e\n      1\"\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 1 inch - Fine - Pan Head--\u003e\n   \u003c!-- 1-1\/4 inch - Coarse - Maxi-Loc--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-c125-150-82.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-c125-150-82.jpg\"\u003e\n      \u003cp\u003e\n       For material 3\/4\" thick Kreg # SML-C125\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Coarse for Softwoods\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Maxi-Loc Head\n      \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cspan\u003e\n      1-1\/4\"\n     \u003c\/span\u003e\n     \u003cp\u003e\n      Most\n      \u003cbr\u003e\n      Popular!\n     \u003c\/p\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 1-1\/4 inch - Coarse - Maxi-Loc--\u003e\n   \u003c!-- 1-1\/4 inch - Fine - Pan Head--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sps-f125-150-94.jpg\" height=\"94\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sps-f125-150-94.jpg\" width=\"150\"\u003e\n      \u003cp\u003e\n       For material 3\/4\" thick Kreg # SPS-F125\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Fine for Hardwoods\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Pan Head\n      \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cspan\u003e\n      1-1\/4\"\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 1-1\/4 inch - Fine - Pan Head--\u003e\n   \u003c!-- 1-1\/4 inch - Fine - Maxi-Loc--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-f125-150-86.jpg\" height=\"86\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-f125-150-86.jpg\" width=\"150\"\u003e\n      \u003cp\u003e\n       For material 3\/4\" thick Kreg # SML-F125\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Fine for Hardwoods\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Maxi-Loc Head\n      \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cspan\u003e\n      1-1\/4\"\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 1-1\/4 inch - Fine - Maxi-Loc--\u003e\n   \u003c!-- 1-1\/2 inch - Coarse - Maxi-Loc--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-c150-150-77.jpg\" height=\"77\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-c150-150-77.jpg\" width=\"150\"\u003e\n      \u003cp\u003e\n       For material 7\/8\u0026amp;quot - 1-1\/8\" thick Kreg# SML-C150\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Coarse for Softwoods\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Maxi-Loc Head\n      \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cspan\u003e\n      1-1\/2\"\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 1-1\/2 inch - Coarse - Maxi-Loc--\u003e\n   \u003c!-- 1-1\/2 inch - Fine - Pan Head--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sps-f150-150-74.jpg\" height=\"74\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sps-f150-150-74.jpg\" width=\"150\"\u003e\n      \u003cp\u003e\n       For material 7\/8\" to 1-1\/8\" thick Kreg # SPS-F150\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Fine for Hardwoods\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Pan Head\n      \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cspan\u003e\n      1-1\/2\"\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 1-1\/2 inch - Fine - Pan Head--\u003e\n   \u003c!-- 1-1\/2 inch - Fine - Maxi-Loc--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-f150-150-87.jpg\" height=\"87\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-f150-150-87.jpg\" width=\"150\"\u003e\n      \u003cp\u003e\n       For material 7\/8\" to 1-1\/8\" thick Kreg # SML-F150\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Fine for Hardwoods\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Maxi-Loc Head\n      \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cspan\u003e\n      1-1\/2\"\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 1-1\/2 inch - Fine - Maxi-Loc--\u003e\n   \u003c!-- 2 inch - Coarse - Maxi-Loc--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-c2-150-57.jpg\" height=\"57\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-c2-150-57.jpg\" width=\"150\"\u003e\n      \u003cp\u003e\n       For material 1-1\/4\u0026amp;quot - 1-3\/8\" thick Kreg # SML-C2\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Coarse for Softwoods\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Maxi-Loc Head\n      \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cspan\u003e\n      2\"\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 2 inch - Coarse - Maxi-Loc--\u003e\n   \u003c!-- 2-1\/2 inch - Coarse - Maxi-Loc--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-c250-150-60.jpg\" height=\"60\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-c250-150-60.jpg\" width=\"150\"\u003e\n      \u003cp\u003e\n       For material 1-1\/2\" thick Kreg # SML-C250\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Coarse for Softwoods\n      \u003c\/p\u003e\n      \u003cp\u003e\n       Maxi-Loc Head\n      \u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     \u003cspan\u003e\n      2-1\/2\"\n     \u003c\/span\u003e\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 2-1\/2 inch - Coarse - Maxi-Loc--\u003e\n  \u003c\/table\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"Pan Head - Fine - Hardwoods \/ 3\/4 inch \/ Pack of 100","offer_id":50821964136730,"sku":"124074","price":9.0,"currency_code":"USD","in_stock":true},{"title":"Pan Head - Fine - Hardwoods \/ 1 inch \/ Pack of 100","offer_id":50821964169498,"sku":"475351","price":9.0,"currency_code":"USD","in_stock":true},{"title":"Pan Head - Fine - Hardwoods \/ 1 inch \/ Pack of 500","offer_id":50821964202266,"sku":"475361","price":38.25,"currency_code":"USD","in_stock":true},{"title":"Pan Head - Fine - Hardwoods \/ 1-1\/4 inch \/ Pack of 100","offer_id":50821964235034,"sku":"185471","price":9.0,"currency_code":"USD","in_stock":true},{"title":"Pan Head - Fine - Hardwoods \/ 1-1\/4 inch \/ Pack of 500","offer_id":50821964267802,"sku":"185472","price":38.25,"currency_code":"USD","in_stock":true},{"title":"Pan Head - Fine - Hardwoods \/ 1-1\/2 inch \/ Pack of 100","offer_id":50821964300570,"sku":"185475","price":9.0,"currency_code":"USD","in_stock":true},{"title":"Pan Head - Coarse - Softwoods \/ 1 inch \/ Pack of 100","offer_id":50821964333338,"sku":"185405","price":9.0,"currency_code":"USD","in_stock":true},{"title":"Pan Head - Coarse - Softwoods \/ 1 inch \/ Pack of 250","offer_id":50821964366106,"sku":"475392","price":22.5,"currency_code":"USD","in_stock":true},{"title":"Pan Head - Coarse - Softwoods \/ 1 inch \/ Pack of 500","offer_id":50821964398874,"sku":"185464","price":38.25,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Fine - Hardwoods \/ 1-1\/4 inch \/ Pack of 100","offer_id":50821964431642,"sku":"475352","price":9.0,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Fine - Hardwoods \/ 1-1\/4 inch \/ Pack of 250","offer_id":50821964464410,"sku":"475389","price":22.5,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Fine - Hardwoods \/ 1-1\/4 inch \/ Pack of 500","offer_id":50821964497178,"sku":"475362","price":38.25,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Fine - Hardwoods \/ 1-1\/4 inch \/ Pack of 1200","offer_id":50821964529946,"sku":"475388","price":69.0,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Fine - Hardwoods \/ 1-1\/2 inch \/ Pack of 100","offer_id":50821964562714,"sku":"475353","price":9.0,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Fine - Hardwoods \/ 1-1\/2 inch \/ Pack of 500","offer_id":50821964595482,"sku":"475363","price":38.25,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 1 inch \/ Pack of 100","offer_id":50821964628250,"sku":"475354","price":9.0,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 1 inch \/ Pack of 500","offer_id":50821964661018,"sku":"475364","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 1-1\/4 inch \/ Pack of 100","offer_id":50821964693786,"sku":"475355","price":9.0,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 1-1\/4 inch \/ Pack of 250","offer_id":50821964726554,"sku":"475381","price":22.5,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 1-1\/4 inch \/ Pack of 500","offer_id":50821964759322,"sku":"475365","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 1-1\/4 inch \/ Pack of 1200","offer_id":50821964792090,"sku":"475380","price":67.0,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 1-1\/2 inch \/ Pack of 100","offer_id":50821964824858,"sku":"475356","price":9.0,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 1-1\/2 inch \/ Pack of 250","offer_id":50821964857626,"sku":"475384","price":22.5,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 1-1\/2 inch \/ Pack of 500","offer_id":50821964890394,"sku":"475366","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 2 inch \/ Pack of 50","offer_id":50821964923162,"sku":"185404","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 2 inch \/ Pack of 250","offer_id":50821964955930,"sku":"185414","price":32.0,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 2-1\/2 inch \/ Pack of 50","offer_id":50821964988698,"sku":"475358","price":9.0,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 2-1\/2 inch \/ Pack of 125","offer_id":50821965021466,"sku":"475386","price":22.5,"currency_code":"USD","in_stock":true},{"title":"Maxi-Loc - Coarse - Softwoods \/ 2-1\/2 inch \/ Pack of 250","offer_id":50821965054234,"sku":"475378","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/kreg-zinc-screws-d.jpg?v=1768342344"},{"product_id":"kreg-blue-kote-pocket-hole-screws","title":"Kreg Blue-Kote Pocket Hole Screws","description":"\u003cbody\u003e\n  \u003cdiv style=\"float:right;width:80px;margin:5px 5px 5px 5px;padding:5px;text-align:center;\"\u003e\n   \u003cimg alt=\"Kreg Screw Heads\" data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-maxi-loc-head-74-80.jpg\" height=\"80\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-maxi-loc-head-74-80.jpg\" width=\"74\"\u003e\n   \u003cbr\u003e\n   Maxi-Loc Head\n  \u003c\/div\u003e\n  \u003cp\u003eKreg's Blue Kote™ screws have three anti-corrosion layers so they are well suited for use outdoors. The Blue coating provides 400% more corrosion resistance than standard zinc-plated Kreg screws.\n All Blue Kote screws use Kreg's Maxi-loc washer head and coarse threads designed for softwoods.\u003c\/p\u003e\n  \u003cp\u003eKreg offers Blue Kote screws in four lengths from 1-1\/4\" to 2-1\/2\". See the \u003ca href=\"#chart\"\u003echart\u003c\/a\u003e below for help selecting the correct length for your application.\u003c\/p\u003e\n\n  \u003cp\u003eKreg screws have self-tapping tips so they drive easily and without splitting. They use \u003cstrong\u003esquare drive\u003c\/strong\u003e for positive connection and easy driving. These screws use\n  \u003ca data-prev-url=\"\/kregdriverbits3and6.aspx\" href=\"\/products\/kregdriverbits3and6\"\u003e# 2 square drivers\u003c\/a\u003e.\u003c\/p\u003e\n\n  \u003cp\u003eWe also offer an assortment of \u003ca data-prev-url=\"\/kreg-blue-screw-kit.aspx\" href=\"\/products\/kreg-blue-screw-kit\"\u003eBlue Kote Screws in a case\u003c\/a\u003e.\u003c\/p\u003e\n\n  \u003cp\u003eIf you're making indoor furniture, use Kreg's \u003ca data-prev-url=\"\/kreg-zinc-pocket-hole-screws.aspx\" href=\"\/products\/kreg-zinc-pocket-hole-screws\"\u003eZinc Screws\u003c\/a\u003e.\n  If you're looking for even more corrision resistance, check out Kreg's \u003ca data-prev-url=\"\/kreg-stainless-steel-pocket-hole-screws.aspx\" href=\"\/products\/kreg-stainless-steel-pocket-hole-screws\"\u003e\n    Stainless Steel\u003c\/a\u003e screws.\u003c\/p\u003e\n  \u003cp\u003e\u003c\/p\u003e\n \n \u003ca name=\"chart\"\u003e\u003c\/a\u003e\n\n  \u003ctable class=\"hwpt\"\u003e\n   \u003ctr\u003e\n    \u003cth\u003eScrew Type\u003c\/th\u003e\n    \u003cth\u003eLength\u003c\/th\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 1-1\/4 inch - Coarse - Maxi-Loc - Blue Steel--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-c125b-150-78.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-c125b-150-78.jpg\"\u003e\n      \u003cp\u003eFor material 3\/4\" thick   Kreg # SML-C125B\u003c\/p\u003e\n      \u003cp\u003eCoarse for Softwoods\u003c\/p\u003e\n      \u003cp\u003eMaxi-Loc Head\u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e1-1\/4\"\u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 1-1\/4 inch - Coarse - Maxi-Loc - Blue Steel--\u003e\n   \u003c!-- 1-1\/2 inch - Coarse - Maxi-Loc - Blue Steel--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-c150b-150-70.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-c150b-150-70.jpg\"\u003e\n      \u003cp\u003e For material 7\/8\" to 1-1\/8\" thick  Kreg # SML-C150B\u003c\/p\u003e\n      \u003cp\u003eCoarse for  Softwoods\u003c\/p\u003e\n      \u003cp\u003eMaxi-Loc Head\u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e1-1\/2\"\u003c\/td\u003e\n   \u003c\/tr\u003e\n\n   \u003c!-- 1-1\/2 inch - Coarse - Maxi-Loc - Blue Steel--\u003e\n   \u003c!-- 2 inch - Coarse - Maxi-Loc - Blue Steel--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-c2b-150-81.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-c2b-150-81.jpg\"\u003e\n      \u003cp\u003eFor material 1-1\/4\" to 1-3\/8\" thick   Kreg # SML-C2B\u003c\/p\u003e\n      \u003cp\u003eCoarse for Softwoods\u003c\/p\u003e\n      \u003cp\u003eMaxi-Loc Head\u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e2\"\u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003c!-- 2 inch - Coarse - Maxi-Loc - Blue Steel--\u003e\n   \u003c!-- 2-1\/2 inch - Coarse - Maxi-Loc - Blue Steel--\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-c250b-150-71.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-c250b-150-71.jpg\"\u003e\n      \u003cp\u003eFor material 1-1\/2\" thick    Kreg # SML-C250B\u003c\/p\u003e\n      \u003cp\u003eCoarse for Softwoods\u003c\/p\u003e\n      \u003cp\u003eMaxi-Loc Head\u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e2-1\/2\"\u003c\/td\u003e\n\n   \u003c\/tr\u003e\n   \u003c!-- 2-1\/2 inch - Coarse - Maxi-Loc - Blue Steel--\u003e\n  \u003c\/table\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"1-1\/4 inch \/ Pack of 100","offer_id":50821965119770,"sku":"185422","price":11.5,"currency_code":"USD","in_stock":true},{"title":"1-1\/4 inch \/ Pack of 1200","offer_id":50821965152538,"sku":"475382","price":74.99,"currency_code":"USD","in_stock":true},{"title":"1-1\/2 inch \/ Pack of 100","offer_id":50821965185306,"sku":"185425","price":11.5,"currency_code":"USD","in_stock":true},{"title":"2 inch \/ Pack of 50","offer_id":50821965218074,"sku":"185428","price":10.75,"currency_code":"USD","in_stock":true},{"title":"2 inch \/ Pack of 250","offer_id":50821965250842,"sku":"185429","price":53.0,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 inch \/ Pack of 50","offer_id":50821965283610,"sku":"185431","price":11.5,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 inch \/ Pack of 125","offer_id":50821965316378,"sku":"475387","price":27.25,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 inch \/ Pack of 250","offer_id":50821965349146,"sku":"185432","price":53.0,"currency_code":"USD","in_stock":true},{"title":"2-1\/2 inch \/ Pack of 2000","offer_id":50821965381914,"sku":"185433","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/kreg-blue-kote-screws-d.jpg?v=1768342345"},{"product_id":"kreg-stainless-steel-pocket-hole-screws","title":"Kreg Stainless Steel Pocket Hole Screws","description":"\u003cbody\u003e\n \n  \u003cdiv style=\"float:right;width:80px;margin:5px 5px 5px 5px;padding:5px;text-align:center;\"\u003e\n   \u003cimg alt=\"Kreg Screw Heads\" data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-maxi-loc-head-74-80.jpg\" height=\"80\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-maxi-loc-head-74-80.jpg\" width=\"74\"\u003e\n   \u003cbr\u003e\n   Maxi-Loc Head\n  \u003c\/div\u003e\n\n  \u003cp\u003eKreg's stainless steel screws are designed for use in corrosive environments like ACQ lumber and maritime applications. All of Kreg's\n  stainless steel screws use Kreg's Maxi-Loc washer heads for strength.\u003c\/p\u003e\n\n  \u003ch5\u003eScrew Types\u003c\/h5\u003e\n\n  \u003cp\u003e\u003cstrong\u003eCoarse thread\u003c\/strong\u003e Kreg screws have deep threads that cut into softwoods and sheet goods for maximum grip.  They should be\n  used in basswood, spruce, fir, cedar, pine, MDF, plywood \u0026amp; particle board.\u003c\/p\u003e\n\n  \u003cp\u003e\u003cstrong\u003eFine thread\u003c\/strong\u003e Kreg screws are smaller so they can drive into hard woods without splitting, but they have more threads\n  per inch to insure sufficient hold. They should be used in mahogany, cherry, maple, poplar, birch, ash, oak \u0026amp; hickory.\u003c\/p\u003e\n\n  \u003cp\u003eKreg offers stainless steel screws in three lengths from 1-1\/4\" to 2-1\/2\". See the \u003ca href=\"#chart\"\u003e chart\u003c\/a\u003e below for help selecting\n  the correct length for your application.\u003c\/p\u003e\n\n  \u003cp\u003eKreg screws have self-tapping tips so they drive easily and without splitting. They use \u003cstrong\u003esquare drive\u003c\/strong\u003e for positive connection and easy driving. These screws use\n   \u003ca data-prev-url=\"\/kregdriverbits3and6.aspx\" href=\"\/products\/kregdriverbits3and6\"\u003e # 2 square drivers\u003c\/a\u003e.\u003c\/p\u003e\n\n  \u003cp\u003eIf you're making indoor furniture, use Kreg's \u003ca data-prev-url=\"\/kreg-zinc-pocket-hole-screws.aspx\" href=\"\/products\/kreg-zinc-pocket-hole-screws\"\u003e Zinc Screws\u003c\/a\u003e.\n  If you're looking for corrision resistant screws at a more affordable price, check out Kreg's\u003ca data-prev-url=\"\/kreg-blue-kote-pocket-hole-screws.aspx\" href=\"\/products\/kreg-blue-kote-pocket-hole-screws\"\u003e\n    Blue Kote\u003c\/a\u003e screws.\u003c\/p\u003e\n\n  \u003ca name=\"chart\"\u003e\n  \u003c\/a\u003e\n  \u003ctable class=\"hwpt\"\u003e\n   \u003ctr\u003e\n    \u003cth\u003eScrew Type\u003c\/th\u003e\n    \u003cth\u003eLength\u003c\/th\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-f125s5-150-94.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-f125s5-150-94.jpg\"\u003e\n      \u003cp\u003eFor material 3\/4\" thick  Kreg # SML-F125S5\u003c\/p\u003e\n      \u003cp\u003eFine for Hardwoods\u003c\/p\u003e\n      \u003cp\u003eMaxi-Loc Head\u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e1-1\/4\"\u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-c125s5-150-81.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-c125s5-150-81.jpg\"\u003e\n      \u003cp\u003eFor material 3\/4\" thick   Kreg # SML-C125S5\u003c\/p\u003e\n      \u003cp\u003eCoarse for Softwoods\u003c\/p\u003e\n      \u003cp\u003eMaxi-Loc Head\u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e1-1\/4\"\u003c\/td\u003e\n    \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-c150s5-150-82.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-c150s5-150-82.jpg\"\u003e\n      \u003cp\u003eFor material 7\/8\" to 1-1\/8\" thick   Kreg # SML-C150S5\u003c\/p\u003e\n      \u003cp\u003eCoarse for Softwoods\u003c\/p\u003e\n      \u003cp\u003eMaxi-Loc Head\u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e1-1\/2\"\u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd class=\"imgcell\"\u003e\n      \u003cimg data-prev-url=\"\/productimages\/joinery\/kreg\/screws\/kreg-sml-c250s5-150-71.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/joinery\/kreg\/screws\/kreg-sml-c250s5-150-71.jpg\"\u003e\n      \u003cp\u003eFor material 1-1\/2\" thick   Kreg # SML-C250S5\u003c\/p\u003e\n      \u003cp\u003eCoarse for Softwoods\u003c\/p\u003e\n      \u003cp\u003eMaxi-Loc Head\u003c\/p\u003e\n    \u003c\/td\u003e\n    \u003ctd\u003e2-1\/2\"\u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/table\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"Fine - Hardwood \/ 1-1\/4 inch \/ Pack of 100","offer_id":50821965480218,"sku":"185443","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Coarse - Softwood \/ 1-1\/4 inch \/ Pack of 100","offer_id":50821965512986,"sku":"185434","price":35.5,"currency_code":"USD","in_stock":true},{"title":"Coarse - Softwood \/ 1-1\/2 inch \/ Pack of 100","offer_id":50821965545754,"sku":"185437","price":37.0,"currency_code":"USD","in_stock":true},{"title":"Coarse - Softwood \/ 2-1\/2 inch \/ Pack of 50","offer_id":50821965578522,"sku":"185440","price":42.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/kreg-stainless-steel-screws-d.jpg?v=1768342346"},{"product_id":"router-bit-leigh-dovetail","title":"Router Bits for Leigh Dovetail Jigs","description":"\u003cimg style=\"float:right;\" alt=\"Highland Woodworking logo\" data-prev-url=\"\/productimages\/logos\/leigh-logo-125-50.png\" height=\"50\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/logos\/leigh-logo-125-50.png\" width=\"125\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eLeigh designs these bits specifically to work with their line of dovetail jigs. They are made with high quality C2 and\n C3 micro grain carbide for long bit life. Each bit is honed to a fine edge with 600 grit diamond wheels for smooth, efficient\n routing. All shanks are 1-3\/4\" long to handle the thickness of the finger assembly or accessory template. Leigh router bits\n are manufactured to ISO 9002 standards.\u003c\/p\u003e\n\u003ch5\u003eShank Size\u003c\/h5\u003e\n\u003cp\u003eMost Leigh jigs come equipped with 8mm shank router bits. They offer 60% more shank strength compared to 1\/4\" shank bits.\n That's very important because the thickness of dovetail templates requires a longer shank bit. To use 8mm shanks, you will\n require a router with either an 8mm collet or a 1\/2\" collet router with a\n \u003ca data-prev-url=\"\/14x12routercolletadapter.aspx\" href=\"\/products\/14x12routercolletadapter\"\u003e 1\/2\" to 8mm collet reducer \u003c\/a\u003e ,\n which are supplied with most Leigh dovetail jigs.\u003c\/p\u003e\n\u003ch5\u003eBit Selection\u003c\/h5\u003e\n\u003cp\u003eIf you're not sure which bit you need, check the appendix for your Leigh jig User's Guide. All of them have a section on\n bit selecion. If you don't have the manual, you can download it from the \u003ca href=\"https:\/\/www.leightools.com\/instructional-videos-and-user-guides\/\"\u003e Leigh Jigs site \u003c\/a\u003e .\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable class=\"hwpt\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eCutting \u003cbr\u003eDiameter\u003c\/th\u003e\n\u003cth\u003eAngle\u003c\/th\u003e\n\u003cth\u003eOverall \u003cbr\u003eLength\u003c\/th\u003e\n\u003cth\u003eShank \u003cbr\u003eLength\u003c\/th\u003e\n\u003cth\u003eShank \u003cbr\u003eDiameter\u003c\/th\u003e\n\u003cth\u003eCutting \u003cbr\u003eDepth Range\u003c\/th\u003e\n\u003cth\u003eLeigh #\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003ctd\u003e8°\u003c\/td\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003ctd\u003eUp to 1\/4\"\u003c\/td\u003e\n\u003ctd\u003e50-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\/16\"\u003c\/td\u003e\n\u003ctd\u003e8°\u003c\/td\u003e\n\u003ctd\u003e2-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003ctd\u003eUp to 3\/8\"\u003c\/td\u003e\n\u003ctd\u003e60-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003ctd\u003e8°\u003c\/td\u003e\n\u003ctd\u003e2-1\/4\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003ctd\u003e1\/4\" - 1\/2\"\u003c\/td\u003e\n\u003ctd\u003e70-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\/16\"\u003c\/td\u003e\n\u003ctd\u003e8°\u003c\/td\u003e\n\u003ctd\u003e2-3\/8\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003ctd\u003e3\/8\" to 5\/8\"\u003c\/td\u003e\n\u003ctd\u003e75-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e8°\u003c\/td\u003e\n\u003ctd\u003e2-9\/16\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003ctd\u003e1\/2\" - 13\/16\"\u003c\/td\u003e\n\u003ctd\u003e80-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e8°\u003c\/td\u003e\n\u003ctd\u003e2-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e13\/16\"\u003c\/td\u003e\n\u003ctd\u003e80-500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e11\/16\"\u003c\/td\u003e\n\u003ctd\u003e8°\u003c\/td\u003e\n\u003ctd\u003e2-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e5\/8\" - 1\"\u003c\/td\u003e\n\u003ctd\u003e90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e13\/16\"\u003c\/td\u003e\n\u003ctd\u003e8°\u003c\/td\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e1\" - 1-1\/4\"\u003c\/td\u003e\n\u003ctd\u003e100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e10°\u003c\/td\u003e\n\u003ctd\u003e2-3\/8\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003ctd\u003eHalf-blind Variable Pitch 5\/8\" \u003cbr\u003eHalf-blind Single Pass 23\/64\"\u003c\/td\u003e\n\u003ctd\u003e101-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e12°\u003c\/td\u003e\n\u003ctd\u003e2-5\/16\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003ctd\u003eHalf-blind Variable Pitch 1\/2\" \u003cbr\u003eHalf-blind Single Pass 19\/64\"\u003c\/td\u003e\n\u003ctd\u003e112-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e12°\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e112-500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e14°\u003c\/td\u003e\n\u003ctd\u003e2-1\/4\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003ctd\u003eHalf-blind Variable Pitch 7\/16\" \u003cbr\u003eHalf-blind Single Pass 1\/4\"\u003c\/td\u003e\n\u003ctd\u003e120-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e14°\u003c\/td\u003e\n\u003ctd\u003e2-9\/16\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e19\/32\"\u003c\/td\u003e\n\u003ctd\u003e120-500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e18°\u003c\/td\u003e\n\u003ctd\u003e2-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003ctd\u003eHalf-blind Variable Pitch 3\/8\" \u003cbr\u003eHalf-blind Single Pass 3\/16\"\u003c\/td\u003e\n\u003ctd\u003e128-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e18°\u003c\/td\u003e\n\u003ctd\u003e2-3\/8\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003ctd\u003e128-500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\/16\"\u003c\/td\u003e\n\u003ctd\u003eStraight\u003c\/td\u003e\n\u003ctd\u003e2-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e8mm\u003c\/td\u003e\n\u003ctd\u003eup to 1\"\u003c\/td\u003e\n\u003ctd\u003e140-8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003ctd\u003eStraight\u003c\/td\u003e\n\u003ctd\u003e3-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e1-1\/4\"\u003c\/td\u003e\n\u003ctd\u003e143-500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\/16\"\u003c\/td\u003e\n\u003ctd\u003eStraight\u003c\/td\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003eUp to 1-1\/4\"\u003c\/td\u003e\n\u003ctd\u003e150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003eStraight\u003c\/td\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003eUp to 1-1\/4\"\u003c\/td\u003e\n\u003ctd\u003e160\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Leigh Jigs","offers":[{"title":"3\/8 inch \/ 1\/2 inch \/ Straight","offer_id":50821978030362,"sku":"105879","price":39.0,"currency_code":"USD","in_stock":true},{"title":"1\/2 inch \/ 1\/4 inch \/ Straight","offer_id":50821978128666,"sku":"105745","price":31.0,"currency_code":"USD","in_stock":true},{"title":"1\/2 inch \/ 8mm \/ 10 degree","offer_id":50821978194202,"sku":"105784","price":31.0,"currency_code":"USD","in_stock":true},{"title":"1\/2 inch \/ 1\/2 inch \/ 12 degree","offer_id":50821978358042,"sku":"105876","price":35.0,"currency_code":"USD","in_stock":true},{"title":"1\/2 inch \/ 1\/2 inch \/ 14 degree","offer_id":50821978390810,"sku":"105877","price":35.0,"currency_code":"USD","in_stock":true},{"title":"1\/2 inch \/ 1\/2 inch \/ 18 degree","offer_id":50821978423578,"sku":"105878","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/hwdovetaild.jpg?v=1768342456"},{"product_id":"leigh-isoloc-carbide-bit-set","title":"Leigh Solid Carbide Spiral Up-cut Bits for Isoloc Jigs - Set of 3","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Leigh Solid Carbide Spiral Up-cut Bits for Isoloc Jigs - Set of 3\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Leigh's Isoloc bit set includes all three bits used to make Isoloc Joints. The 5\/16\" bit is used for most joints.\n Inlaid Isoloc joints require  1\/4\" \u0026amp; 3\/8\" bits. All bits are solid carbide up-cut bits for rigidity, smooth cut and long edge life.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Included Bits\n  \u003c\/h5\u003e\n  \u003cul style=\"margin:-3px 0px 0px 0px;\"\u003e\n   \u003cli\u003e\n    1\/4\" diameter x 1\/4\" shank x 3\" long — Leigh #168C — for 1\/8\" - 1-1\/4\" stock\n   \u003c\/li\u003e\n   \u003cli\u003e\n    5\/16\" diameter x 5\/16\" shank x 3\" long — Leigh #170C — for 1\/8\" - 1-1\/4\" stock\n   \u003c\/li\u003e\n   \u003cli\u003e\n    3\/8\" diameter x 3\/8\" shank x 3\" long — Leigh #173C — for 1\/8\" - 1-1\/4\" stock\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   \u003cspan style=\"font-weight:bold;\"\u003e\n    Please Note:\n   \u003c\/span\u003e\n   5\/16\" bit REQUIRES a 5\/16\"(8mm) collet or\n   \u003ca data-prev-url=\"\/8mmx12colletadapter.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/8mmx12colletadapter.aspx\"\u003e\n    collet adapter\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cspan style=\"font-weight:bold;\"\u003e\n    Please Note:\n   \u003c\/span\u003e\n   3\/8\" bit REQUIRES a 3\/8\" collet or\n   \u003ca data-prev-url=\"\/38x12routercolletadapter.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/38x12routercolletadapter.aspx\"\u003e\n    collet adapter\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003c!--\nHigh Quality Bits\nFor the best results, Isoloc joints should be routed with spiral upcut bits. Leigh offers two variants: high speed steel and solid carbide. The spiral upcut design routs cleaner, faster, leaves a smoother finish and dramatically reduces tear out. They are ideally suited for the smooth organic curves of Isoloc joints. Although both produce excellent results, the solid carbide versions are stiffer and hold a keen edge longer than the HSS. The performance of less expensive HSS bits is comparable to solid carbide but lose their edge more quickly. Choose the bit that best suits your needs and budget. Note: The Isoloc bit set 1617I is only available in solid carbide.\nShank Size\nBits with 5\/16\"(8mm) shanks require a 1\/2\" to 8mm collet reducer (Item 172-8) and bits with 3\/8\" shanks require a 1\/2\" to 3\/8\" collet reducer (Item 172-375).\nIsoloc Joint Bit Selection\nAll standard Isoloc joints are routed with a 5\/16\" (8mm) diameter bit. Inlaid and shadow Isoloc joints require two additional router bits, specifically 1\/4\" and 3\/8\". Pin boards for regular Isoloc\njoints must be 3\/4\" thick or greater. Socket\nboards may be any thickness between 1\/8\"\nand 1 1\/4\". Leigh recommends the use of a\nplunge router for Isoloc joints. The cutting\nflute length of the bit (B) must be equal to\nor greater than the thickness of the tail\nboard (B). \n\n--\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Default Title","offer_id":50821984616730,"sku":"105428","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105428d.jpg?v=1768342498"},{"product_id":"leigh-f3-finger-joint-spiral-set-1","title":"Leigh Spiral Bits for F3 Finger Joint Templates - Set of 10","description":"\u003cbody\u003e\n  \u003cp\u003e\n   The 1608C set includes all the bits you'll need to make finger joints with the Leigh F3 Finger Joint Template. The 3\/32\" bit is single flute and the rest are double flute. Each set includes one 5\/16\"(8mm) to 1\/2\" and one 3\/8\" to 1\/2\" collet adapter sleeve.\n  \u003c\/p\u003e\n\n  \u003ctable class=\"hwpt\"\u003e\n   \u003ccaption style=\"text-align:center;font-weight:bold;font-size:1.1em;color:#660000;\"\u003e\n    Bits Included in 1608C Carbide Set\n   \u003c\/caption\u003e\n   \u003ctr\u003e\n    \u003cth\u003e\n     Leigh #\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Type\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Material\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Diameter\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Depth\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Shank\n    \u003c\/th\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     163\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Straight - Single\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     HSS\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/32\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/4\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     164C\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Spiral Upcut - Double\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Solid Carbide\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/4\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     165C\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Spiral Upcut - Double\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Solid Carbide\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     5\/32\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     5\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/4\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     166C\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Spiral Upcut - Double\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Solid Carbide\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/16\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/4\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/4\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     168C\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Spiral Upcut - Double\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Solid Carbide\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/4\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1-1\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/4\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     170C\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Spiral Upcut - Double\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Solid Carbide\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     5\/16\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1-1\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     5\/16\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     173C\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Spiral Upcut - Double\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Solid Carbide\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1-1\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/8\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     180C\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Spiral Upcut - Double\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Solid Carbide\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1-5\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/table\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Default Title","offer_id":50822003425562,"sku":"105842","price":366.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105841.jpg?v=1751686927"},{"product_id":"leigh-f3-finger-joint-spiral-set-1-1","title":"Leigh Spiral Bits for F18 \u0026 F24 Finger Joint Templates - Set of 7","description":"\u003cbody\u003e\n  \u003cp\u003e\n   This set includes all the bits you'll need to make finger joints with the Leigh F18 \u0026amp; F24 Finger Joint Templates. The 3\/32\" bit is single flute and the rest are double flute. Each set includes one 3\/8\" to 1\/2\" collet adapter sleeve.\n  \u003c\/p\u003e\n\n  \u003ctable class=\"hwpt\"\u003e\n   \u003ccaption style=\"text-align:center;font-weight:bold;font-size:1.1em;color:#660000;\"\u003e\n    Bits Included in 1608C Carbide Set\n   \u003c\/caption\u003e\n   \u003ctr\u003e\n    \u003cth\u003e\n     Leigh #\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Type\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Material\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Diameter\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Depth\n    \u003c\/th\u003e\n    \u003cth\u003e\n     Shank\n    \u003c\/th\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     163\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Straight - Single\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     HSS\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/32\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/4\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     164C\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Spiral Upcut - Double\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Solid Carbide\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/4\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     166C\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Spiral Upcut - Double\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Solid Carbide\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/16\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/4\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/4\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     168C\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Spiral Upcut - Double\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Solid Carbide\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/4\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1-1\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/4\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     173C\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Spiral Upcut - Double\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Solid Carbide\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1-1\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     3\/8\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n   \u003ctr\u003e\n    \u003ctd\u003e\n     180C\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Spiral Upcut - Double\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     Solid Carbide\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1-5\/8\"\n    \u003c\/td\u003e\n    \u003ctd\u003e\n     1\/2\"\n    \u003c\/td\u003e\n   \u003c\/tr\u003e\n  \u003c\/table\u003e\n \n\u003c\/body\u003e","brand":"Leigh Jigs","offers":[{"title":"Default Title","offer_id":50822003491098,"sku":"105844","price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105843.jpg?v=1751686929"},{"product_id":"leigh-d1600-finger-joint-spiral-set","title":"Leigh Spiral Bits for F1600 Finger Joint Templates - Set of 7","description":"\u003cp\u003eThis set includes all the bits you'll need to make finger joints with the Leigh F1600 Finger Joint Template. The 1\/16\" bit is single flute and the rest are double flute.\u003c\/p\u003e\n\u003cp\u003eEach set includes one 3\/8\" to 1\/2\" collet adapter sleeve and is packed in a wooden box.\u003c\/p\u003e\n\u003cp\u003ePlease Note: The bits in these sets can also be used for the F1, F2, F3, F18 and F24 Finger Joint Templates, but they do not include the same selection of bits in the sets designed for those templates.\u003c\/p\u003e\n\u003cul style=\"margin-top: -2px;\"\u003e\n\u003cli\u003eWe offer the \u003ca data-prev-url=\"\/leigh-finger-joint-spiral-set.aspx\" href=\"\/products\/leigh-finger-joint-spiral-set\"\u003e full set of 11 bits for the F1 and F2 Finger Joint Templates \u003c\/a\u003e .\u003c\/li\u003e\n\u003cli\u003eWe offer the \u003ca data-prev-url=\"\/leigh-f3-finger-joint-spiral-set-1.aspx\" href=\"\/products\/leigh-f3-finger-joint-spiral-set-1\"\u003e full set of 10 bits for the F3 Finger Joint Template \u003c\/a\u003e .\u003c\/li\u003e\n\u003cli\u003eWe offer the \u003ca data-prev-url=\"\/leigh-f3-finger-joint-spiral-set-1-1.aspx\" href=\"\/products\/leigh-f3-finger-joint-spiral-set-1-1\"\u003e set of 7 bits for the F18 and F24 Finger Joint Templates \u003c\/a\u003e .\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ctable class=\"hwpt\"\u003e\n\u003ccaption style=\"text-align: center; font-weight: bold; font-size: 1.1em; color: #45668A;\"\u003eBits Included in 1606C Carbide Set\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLeigh #\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eShank\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e162\u003c\/td\u003e\n\u003ctd\u003eStraight - Single\u003c\/td\u003e\n\u003ctd\u003eHSS\u003c\/td\u003e\n\u003ctd\u003e1\/16\"\u003c\/td\u003e\n\u003ctd\u003e3\/16\"\u003c\/td\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e164C\u003c\/td\u003e\n\u003ctd\u003eSpiral Upcut - Double\u003c\/td\u003e\n\u003ctd\u003eSolid Carbide\u003c\/td\u003e\n\u003ctd\u003e1\/8\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e166C\u003c\/td\u003e\n\u003ctd\u003eSpiral Upcut - Double\u003c\/td\u003e\n\u003ctd\u003eSolid Carbide\u003c\/td\u003e\n\u003ctd\u003e3\/16\"\u003c\/td\u003e\n\u003ctd\u003e3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e168C\u003c\/td\u003e\n\u003ctd\u003eSpiral Upcut - Double\u003c\/td\u003e\n\u003ctd\u003eSolid Carbide\u003c\/td\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003ctd\u003e1-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e173C\u003c\/td\u003e\n\u003ctd\u003eSpiral Upcut - Double\u003c\/td\u003e\n\u003ctd\u003eSolid Carbide\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003ctd\u003e1-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180C\u003c\/td\u003e\n\u003ctd\u003eSpiral Upcut - Double\u003c\/td\u003e\n\u003ctd\u003eSolid Carbide\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e1-5\/8\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"hwpt\"\u003e\n\u003ccaption style=\"text-align: center; font-weight: bold; font-size: 1.1em; color: #45668A;\"\u003eBits Included in 1606F High Speed Steel (HSS) Set\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eLeigh #\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003cth\u003eDiameter\u003c\/th\u003e\n\u003cth\u003eDepth\u003c\/th\u003e\n\u003cth\u003eShank\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e162\u003c\/td\u003e\n\u003ctd\u003eStraight - Single\u003c\/td\u003e\n\u003ctd\u003eHSS\u003c\/td\u003e\n\u003ctd\u003e1\/16\"\u003c\/td\u003e\n\u003ctd\u003e3\/16\"\u003c\/td\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e164\u003c\/td\u003e\n\u003ctd\u003eSpiral Upcut - Double\u003c\/td\u003e\n\u003ctd\u003eHSS\u003c\/td\u003e\n\u003ctd\u003e1\/8\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e166\u003c\/td\u003e\n\u003ctd\u003eSpiral Upcut - Double\u003c\/td\u003e\n\u003ctd\u003eHSS\u003c\/td\u003e\n\u003ctd\u003e3\/16\"\u003c\/td\u003e\n\u003ctd\u003e3\/4\"\u003c\/td\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e168\u003c\/td\u003e\n\u003ctd\u003eSpiral Upcut - Double\u003c\/td\u003e\n\u003ctd\u003eHSS\u003c\/td\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003ctd\u003e1-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e173\u003c\/td\u003e\n\u003ctd\u003eSpiral Upcut - Double\u003c\/td\u003e\n\u003ctd\u003eHSS\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003ctd\u003e1-1\/8\"\u003c\/td\u003e\n\u003ctd\u003e3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e180\u003c\/td\u003e\n\u003ctd\u003eSpiral Upcut - Double\u003c\/td\u003e\n\u003ctd\u003eHSS\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003ctd\u003e1-5\/8\"\u003c\/td\u003e\n\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n","brand":"Leigh Jigs","offers":[{"title":"High Speed Steel - HSS  1606F","offer_id":50822003556634,"sku":"105734","price":74.99,"currency_code":"USD","in_stock":true},{"title":"Solid Carbide  1606C","offer_id":50822003589402,"sku":"105733","price":154.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/105733.jpg?v=1751686932"},{"product_id":"kregpocketholescrewstarterkit","title":"Kreg Pocket-Hole Screw Starter Kit","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kreg Pocket-Hole Screw Starter Kit\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Kreg SK04 Screw Kit has six of the most popular pocket screws to get you started on a variety of projects.\n It is a good choice if you're getting started with your first Kreg jig or you just want to have a selection of\n screws on hand in case something comes up.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The kit includes everything from 1\" Pan-Head screws for building with 1\/2\" thick material, to 2-1\/2\"\n Blue-Kote screws for building bigger projects outdoors, all housed in a durable, divided case.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Contents\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-3px;\"\u003e\n   \u003cli\u003e\n    50 – 1\" screws – Zinc coated, coarse-thread for softwoods\n   \u003c\/li\u003e\n   \u003cli\u003e\n    50 – 1-1\/4\" screws – Zinc coated, fine-thread for hardwoods\n   \u003c\/li\u003e\n   \u003cli\u003e\n    50 – 1-1\/4\" screws – Zinc coated, coarse-thread for softwoods\n   \u003c\/li\u003e\n   \u003cli\u003e\n    50 – 1-1\/2\" screws – Zinc coated, coarse-thread for softwoods\n   \u003c\/li\u003e\n   \u003cli\u003e\n    30 – 2-1\/2\" screws – Zinc coated, coarse-thread for softwoods\n   \u003c\/li\u003e\n   \u003cli\u003e\n    30 – 2-1\/2\" screws – BlueKote, coarse-thread for outdoor use in softwoods\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Divided carrying case with built-in screw selection chart\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"Default Title","offer_id":50822010634522,"sku":"185491","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/185491d.jpg?v=1768342716"},{"product_id":"kreg-easy-set-pocket-hole-drill","title":"Kreg Easy-Set Drill Bit with Stop Collar and Gauge","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kreg Easy-Set Drill Bit with Stop Collar and Gauge\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Easy-Set Pocket Hole Drill bit can be used with all standard Kreg Pocket Hole Jigs\n   \u003ca href=\"#star\" style=\"vertical-align: super; font-size: smaller; color:#660000;\"\u003e\n    *\n   \u003c\/a\u003e\n   , but it is designed for use with the\n   \u003ca data-prev-url=\"\/kreg-300-pocket-hole-jig.aspx\" href=\"\/products\/kreg-300-pocket-hole-jig\"\u003e\n    300-series jigs\n   \u003c\/a\u003e\n   . It has the standard stepped design with a 3\/8\" shoulder to drill the “pocket” for the pocket screw head and an 1\/8\" pilot to pre-drill for the screw. It also has a hex shank for use in most quick-change chucks.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   We offer the bit by itself or with the stop collar and combination hex wrench and thickness gauge.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Easy-Set drill bits engraved markings make set-up even easier when using the Easy-Set Stop Collar. Simply align the sighting window in the Stop Collar with the thickness marking(1\/2\", 3\/4\u0026amp;quot or 1-1\/2\") on the bit and your depth of cut is perfectly set with ease.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Easy-Set Pocket Hole Drill Bit with Stop collar and and gauge\/hex wrench is included with Kreg 300-Series Pocket Hole Jigs.\n  \u003c\/p\u003e\n  \u003ca name=\"star\"\u003e\n  \u003c\/a\u003e\n  \u003cspan style=\"font-weight:bold; color:#660000;font-size:1.1em;\"\u003e\n   *\n  \u003c\/span\u003e\n  \u003cp style=\"margin:-3px 0px 0px 10px;\"\u003e\n   The Easy-Set Drill bit is NOT for use with the Kreg HD or Micro Pocket Hole Jigs.\n  \u003c\/p\u003e\n  \u003cp style=\"margin:-1px 0px 0px 10px;\"\u003e\n   The Easy-Set Drill bit works with K5, K4, K3, R3, Mini, and Foreman jigs.\n  \u003c\/p\u003e\n  \u003c!--    Stepped drill bit for creating pocket holes using a Kreg® Pocket-Hole Jig    Works with materials from ½\" to 1½\" thick    Easy-set etched markings for ½\", ¾\", 1½\" materials    Direct replacement for drill bit included with Kreg® Pocket-Hole Jig 320, 310    Also works with K5, K4, K3, R3, Mini, and Foreman    ¼\" hex shank works with quick-change drill chucks--\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"Easy-Set Drill Bit Only","offer_id":50822016925978,"sku":"124191","price":19.0,"currency_code":"USD","in_stock":true},{"title":"Easy-Set Drill Bit with Stop Collar and Gauge","offer_id":50822016958746,"sku":"124192","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Stop Collar and Gauge for Easy-Set Drill Bit","offer_id":50822016991514,"sku":"124193","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/124192_d.jpg?v=1768342784"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/collections\/LeighDovetailsdrawing.jpg?v=1774111353","url":"https:\/\/www.highlandwoodworking.com\/collections\/dovetailjigs-joinerytools.oembed","provider":"Highland Woodworking","version":"1.0","type":"link"}