{"title":"Lie-Nielsen Hand Tools","description":"\u003cdiv\u003e\n\u003cp\u003eSince 1981, Lie-Nielsen Toolworks has been a proven world-class manufacturer of fine hand tools. We have proudly offered their handsome hand planes and the plane replacement blades for decades.\u003c\/p\u003e\n\u003cp\u003eIn recent years, Lie-Nielsen's craftsmen, who are renowned for their fine hand planes, have applied their skill to the creation of other fine hand tools. They now craft premium hand saws, spokeshaves and chisels. We are pleased to carry these additions to the Lie-Nielsen line of tools, as well as their excellent honing guide, froe, holdfast and dowel plate - every tool made to the exacting standards of Lie-Nielsen.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eLie Nielsen hand tools are made in the USA.\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"lie-nielsenno4castironsmoothplane","title":"Lie-Nielsen No. 4 Cast Ductile Iron Smooth Plane","description":"\u003cp\u003eSmoothing Planes, the smallest of Lie Nielsen Smoothing, Jack, and Jointer bench plane categories, number #1 through #4-1\/2. In general, Smoothing Planes are used for the final finish, creating a wood surface as smooth or smoother than sandpaper can. At 9-1\/2\" long and 4 lb, the No. 4 Ductile Iron is near the top of its category in size, making it a great all-around smoothing plane. You will find it able to cut though even the hardest woods with no chatter and with zero tearout, leaving a smooth final surface. These planes cut beautifully where others fail: reversed grain, quilted or fiddleback timbers, even knots and end grain can be shaved cleanly, with no loss of control.\u003c\/p\u003e\n\u003cp\u003eEach of these planes features meticulous construction, low-tolerance machining and Bed Rock body and frog design. Soles and sides are milled reliably flat and square, and their finish is so smooth that they hardly need more than a well-buffed coat of wax to be practically friction-free. Bedrock castings, both sole and side rails, are considerably heavier than those of Bailey-style planes, and the frog in particular is radically more stable, supportive and adjustable. The throat opening can be altered without removing the iron, which remains supported all the way to the heel of the bevel regardless of how tight a throat you set. Lie-Nielsen irons are likewise heavier and more carefully processed than run-of-the-mill tools. They're tempered to Rc 60-62 for excellent edge longevity, and the rigidity afforded by their 1\/8\" thickness makes their performance simply outstanding.\u003c\/p\u003e\n\u003cp\u003eNo. 4 body unbreakable ductile iron, Iron Width: 2\" Overall Length: 9-1\/2\" Weight: 4 lbs Made in the U.S.A.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLee Laird from Lie Nielsen Tools Works produces an \u003ca href=\"\/pages\/custom-lee-laird-s-hand-plane-fundamentals-series\" data-prev-url=\"\/lee-laird-s-hand-plane-fundamentals-series.aspx\" target=\"_blank\"\u003einstructional series\u003c\/a\u003e on hand plane use and care and has much more to say about \u003ca title=\"improving your results using a smoothing planes\" href=\"https:\/\/woodworkingtooltips.com\/?p=1579\" target=\"_blank\"\u003eimproving your results using a smoothing plane\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821469700378,"sku":"434235","price":390.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434235.png?v=1760297548"},{"product_id":"lie-nielsenno4-12smoothplane","title":"Lie-Nielsen No. 4-1\/2 Smooth Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Lie-Nielsen No. 4-1\/2 Smooth Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Smoothing Planes, the smallest of Lie Nielsen Smoothing, Jack, and Jointer bench plane categories, number #1 through #4-1\/2. \nIn general Smoothing Planes are used for the final finish, creating a wood surface as smooth or smoother than sandpaper can.\nAt 10-3\/8\" long and 5.4 lbs, the No. 4 1\/2 is the largest smooth plane among its peers, so you will find it more suitable\n for slightly larger projects or harder woods. Compared to the No. 4 it is 1\/2 inch longer, weighs 1.4 more lbs and and the blade\n is 2-3\/8\" wide x .140\" thick versus 2\" wide x .125\" thick on the No. 4. Overall with it's thicker sole and\n heavier body the No. 4-1\/2 is a solid, substantial smooth plane capable of yielding very fine shavings even on difficult woods.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Each Lie Nielsen Smoothing Plane features meticulous construction, low-tolerance machining and Bed Rock style body and frog\n design. Soles and sides are milled flat within less than .002\" maximum deviation, and the finish is so smooth that these\n planes are nearly friction-free.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Frogs on all models are cast in bronze.  Bed Rock castings, both sole and side rails, are considerably heavier than those \nof ordinary planes, and the frog is radically more stable and more adjustable.  Throat opening can be adjusted without removing\n the irons, and the iron remains fully supported no matter how small an opening you set.Irons are over 1\/8\" thick, providing\n extraordinarily smooth cutting action.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Heavy irons, stable frogs and tiny throat openings combine to allow planing performance that's simply impossible with other\n planes; you can plane reversed grain, quilted or fiddleback figured timbers, and even knots with no tearout, no chatter, and\n no loss of control at all. Lie-Nielsen's polished bronze lever caps and custom cherry handles perfectly complement the quality\n of these beautiful tools.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   No. 4-1\/2 Smooth Plane is cast only in unbreakable ductile iron, Iron Width: 2-3\/8\"  Overall Length: 10-3\/8\"\n Weight: 5.4 lbs. Made in the U.S.A.\n  \u003c\/p\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n  \u003ch3 style=\"background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   Learn more about Lie Nielsen's complete hand plane collection in Lee Laird's\n   \u003ca data-prev-url=\"\/lee-laird-s-hand-plane-fundamentals-series.aspx\" href=\"\/pages\/custom-lee-laird-s-hand-plane-fundamentals-series\" target=\"_blank\"\u003e\n    instructional hand plane series\n   \u003c\/a\u003e\n   hosted on the Highland Woodworking Blog.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821471404314,"sku":"434262","price":405.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434262d.jpg?v=1768338425"},{"product_id":"lie-nielsenno5jackplane","title":"Lie-Nielsen No. 5 Jack Plane","description":"\u003cp\u003eThe Lie Nielsen No. 5 Jack Plane is near the middle of the size and weight range of the #1 - #8 bench planes. The stature of the No. 5 makes it a very versatile plane to have on hand - depending on the setup it can function as a larger format smoothing plane, a typical jack plane dressing timber to size or a rapid stock removing jointer plane.\u003c\/p\u003e\n\u003cp\u003eEach Lie Nielsen plane features meticulous construction, low-tolerance machining and Bed Rock body and frog design. Soles and sides are milled reliably flat and square, and their finish is so smooth that they hardly need more than a well-buffed coat of wax to be practically friction-free. Bed Rock castings, both sole and side rails, are considerably heavier than those of Bailey-style planes, and the frog in particular is radically more stable, supportive and adjustable. The throat opening can be altered without removing the iron, which remains supported all the way to the heel of the bevel regardless of how tight a throat you set. Lie-Nielsen irons are likewise heavier and more carefully processed than run-of-the-mill tools. They're tempered to Rc 60-62 for excellent edge longevity, and the rigidity afforded by their 1\/8\" thickness makes their performance simply outstanding. These planes cut beautifuly where others fail: reversed grain, quilted or fiddleback timbers, even knots and end grain can be shaved cleanly, with no tearout, no chatter, no loss of control at all.\u003c\/p\u003e\n\u003cp\u003eNo. 5 Jack Plane ductile iron body only, Iron Width: 2\" Overall Length: 14\" Weight: 5.5 lbs. Made in the U.S.A.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLee Laird from Lie Nielsen Tools Works produces an \u003ca data-prev-url=\"\/lee-laird-s-hand-plane-fundamentals-series.aspx\" href=\"\/pages\/custom-lee-laird-s-hand-plane-fundamentals-series\" target=\"_blank\"\u003einstructional series\u003c\/a\u003e on hand planes and has written in detail about the versatility of Lie-Nielsen's No. 5 Jack Plane. Read Lee's \u003ca href=\"https:\/\/woodworkingtooltips.com\/?p=6491\" target=\"_blank\"\u003esetup guide for the No. 5 Jack Plane\u003c\/a\u003e on the Highland Woodworking Blog.\u003c\/p\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821471469850,"sku":"434236","price":400.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434236.png?v=1759512444"},{"product_id":"lie-nielsenlowanglejackplane","title":"Lie-Nielsen Low Angle Jack Plane No. 62","description":"\u003cp\u003eLie Nielsen's Low Angle Jack Plane is based on the Stanley 62. With its 14\" long cast ductile iron body and heavy 2\" wide by 3\/16\" thick iron bedded (bevel up) at just 12°; this plane's low cutting angle (~37°) lets it slice wood fibers without effort, especially on end grain. An adjustable sole plate allows fine-tuning the throat opening to nearly eliminate tear out when planing surface grain. Bronze cap iron \u0026amp; cherry handles complete the package.\u003c\/p\u003e\n\u003cp\u003eThere are three types of irons available (one standard iron comes with the plane), the standard iron with a 25° bevel, \u003ca data-prev-url=\"\/lie-nielsen-Low Angle-jack-plane-toothed-iron.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/lie-nielsen-Low%20Angle-jack-plane-toothed-iron.aspx\" target=\"_blank\"\u003e toothing iron\u003c\/a\u003e and the \u003ca data-prev-url=\"\/lie-nielsen-Low Angle-jack-plane-optional-scraper-blade.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/lie-nielsen-Low%20Angle-jack-plane-optional-scraper-blade.aspx\" target=\"_blank\"\u003e scraping iron\u003c\/a\u003e. You can also grind a steeper angle (33° to 38°) on another standard blade to have a cutting action more like a smoothing plane.\u003c\/p\u003e\n\u003cp\u003eBlade Width is 2\". Overall Length of sole is 14\". Width of sole is 2-1\/2\". Weight: 4.55 lb. Made in the U.S.A.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n\u003cp\u003eLee Laird from Lie Nielsen Tools Works produces an \u003ca data-prev-url=\"\/lee-laird-s-hand-plane-fundamentals-series.aspx\" href=\"\/pages\/custom-lee-laird-s-hand-plane-fundamentals-series\" target=\"_blank\"\u003einstructional series \u003c\/a\u003e on hand plane use and care and has much more to say about Lie-Nielsen's Low Angle Jack Plane. Read Lee's article about the \u003ca href=\"http:\/\/blog.woodworkingtooltips.com\/2011\/09\/the-plane-facts-the-62-Low%20Angle-jack-plane\/\" target=\"_blank\"\u003e Lie-Nielsen Low Angle Jack Plane No. 62\u003c\/a\u003e on the Highland Woodworking Blog.\u003c\/p\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821471731994,"sku":"434213","price":310.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434213.png?v=1760483800"},{"product_id":"lie-nielsenscrubplane","title":"Lie-Nielsen  Scrub Plane 40-1\/2","description":"\u003cbody\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Lie-Nielsen  Scrub Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The scrub plane is used for dimensioning \u0026amp; truing rough-sawn lumber, with thick shavings aggressively taken diagonally across the grain for maximum effectiveness.\n Its narrow iron is ground convex for deep cuts without tearing at the edges, leaving characteristically scalloped surfaces that have become a hallmark of the hand-tool\n purist. Scrub planes are very efficient tools to use for the removal of large amounts of waste wood and for trimming stock. 10-1\/4\" long, with cherry knob \u0026amp; handle.\n Plane body is cast ductile iron. 1-1\/2\" wide iron is 3\/16\" thick.\n  \u003c\/p\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n  \u003ch3 style=\"background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   Lee Laird from Lie Nielsen Tools Works produces an\n   \u003ca data-prev-url=\"\/lee-laird-s-hand-plane-fundamentals-series.aspx\" href=\"\/pages\/custom-lee-laird-s-hand-plane-fundamentals-series\" target=\"_blank\"\u003e\n    instructional series\n   \u003c\/a\u003e\n   on hand plane\n use and care and has much more to say about Lie-Nielsen's Scrub Plane model 40-1\/2. Read Lee's article about using the\n   \u003ca href=\"http:\/\/blog.woodworkingtooltips.com\/2011\/05\/the-plane-facts-using-a-scrub-plane\/\" target=\"_blank\"\u003e\n    Lie-Nielsen Scrub Plane\n   \u003c\/a\u003e\n   on the Highland Woodworking Blog.\n  \u003c\/p\u003e\n\n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821471863066,"sku":"434212","price":240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434212d_322b5198-8906-4da2-b270-360c327f9964.jpg?v=1768338427"},{"product_id":"lie-nielsensmallchiselplane","title":"Lie-Nielsen Small Chisel Plane No. 97-1\/2","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Lie-Nielsen Small Chisel Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Lie Nielsen's Small Chisel Plane never fails to turn heads with the cutting edge of the iron at the very front of the plane,\n it functions like a paring chisel with depth control. This uncommon plane is typically used to clean right up to the end of a\n rabbet after bullnose and rabbet planes have done most of the work.  Chisel planes also work very handsomely as trim planes\n for cleanly flush-cutting pins, tails, through tenons or plugs, and for paring away dried glue squeeze-out.  The small bronze\n plane is 6-1\/2 inches long x 1-3\/4 inches wide.  Bed angle is 12° for clean cutting especially on end grain.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   No. 97-1\/2 Small Chisel Plane bronze body only, Blade Width: 1 3\/4\" Overall Length: 6 1\/2\" Weight: 2.35 lbs. Made in the U.S.A.\n  \u003c\/p\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n  \u003ch3 style=\"background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   Lee Laird from Lie Nielsen Tools Works produces an\n   \u003ca data-prev-url=\"\/lee-laird-s-hand-plane-fundamentals-series.aspx\" href=\"\/pages\/custom-lee-laird-s-hand-plane-fundamentals-series\" target=\"_blank\"\u003e\n    instructional series\n   \u003c\/a\u003e\n   on hand plane use and care and has much more to say about Lie-Nielsen's Small Chisel plane. Read Lee's review of the\n   \u003ca href=\"http:\/\/blog.woodworkingtooltips.com\/2014\/01\/january-lie-nielsen-tool-of-the-month-small-chisel-plane\/\" target=\"_blank\"\u003e\n    Lie-Nielsen Small Chisel Plane\n   \u003c\/a\u003e\n   on the Highland Woodworking Blog.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821475402010,"sku":"434215","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434215d.jpg?v=1768338449"},{"product_id":"lie-nielsenlow-angleadjustable-mouthblockplane-60-12","title":"Lie-Nielsen Low Angle Adjustable-Mouth Block Plane 60-1\/2","description":"\u003cp\u003eThe beautiful Lie-Nielsen Low Angle Adjustable-Mouth Block Plane has a large bronze cap iron that fits the hand perfectly. The adjustable throat can be set to a wide opening for heavy work, or barely as wide as a shaving for the most controlled finish cuts. Bed angle is 12 degrees on the Low Angle plane, 20 degrees on the standard. Irons are 1-3\/8\" wide by 1\/8\" thick; bodies are 6-1\/4\" long and are made of unbreakable ductile iron.\u003c\/p\u003e\n\u003cp\u003eNo. 60-1\/2 body unbreakable ductile iron, Iron Width: 1 3\/8\" Overall Length: 6-1\/4\" Weight: 1.8 lb  Made in the U.S.A.\u003c\/p\u003e\n\u003c!--mfg propaganda\n\nNo.60-1\/2 Adjustable Mouth Block PlaneBased on the Stanley No. 60½, this versatile plane is useful for every sort of woodworking job\n and a pleasure to use.The movable shoe in front of the blade allows you to easily and precisely adjust the mouth opening: fine\n mouth for finishing work and thin shavings, or ample opening for rank cuts. Ductile Iron body is surface ground flat and square\n to a tolerance of .001\" or better. Large, comfortable Bronze cap is tensioned with a 1-1\/2\" Brass spinwheel. Like our other\n block planes, the blade is adjusted with a captive nut for precise control with minimal backlash.The blade is bedded at 12º\n for fine cuts and end grain work. Weight 1.5 lbs.    6-1\/4\" long    1-3\/4\" wide    Blade is 1-3\/8\" wide x 1\/8\" thick.\n    Blade is bedded at 12º    Weight 1.5 lbs.--\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821475762458,"sku":"434237","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434237.png?v=1755382206"},{"product_id":"lie-nielsenno102bronzelow-angleblockplane","title":"Lie-Nielsen No. 102 Bronze Low Angle Block Plane","description":"\u003cp\u003eLie-Nielsen's No. 102 Bronze Low Angle Block Plane is a general-purpose block plane based on Stanley's original No. 102 design. Shorter than the \u003ca data-prev-url=\"\/lie-nielsenLow Angleadjustable-mouthblockplane-60-12.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/lie-nielsenLow%20Angleadjustable-mouthblockplane-60-12.aspx\"\u003e60-1\/2\u003c\/a\u003e by an inch, it fits comfortably in the hand and apron pocket. The 1-1\/4\" wide plane iron is bedded at 12° and secured in milled grooves for total stability, making it a great plane for fine cuts and endgrain work. Depth of cut is adjusted mechanically with stainless steel hardware. Bronze body is 5-1\/4\" long, with highly polished bronze cap. Weighs 1 lb. \u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e\n\u003cp\u003eLee Laird from Lie Nielsen Tools Works produces an \u003ca data-prev-url=\"\/lee-laird-s-hand-plane-fundamentals-series.aspx\" href=\"\/pages\/custom-lee-laird-s-hand-plane-fundamentals-series\" target=\"_blank\"\u003e instructional series\u003c\/a\u003e on hand plane use and care and has much more to say about Lie-Nielsen's No. 102 Bronze Low Angle Block Plane. Read Lee's \u003ca href=\"http:\/\/blog.woodworkingtooltips.com\/2013\/06\/the-plane-facts-the-lie-nielsen-102-block-planes\/\" target=\"_blank\"\u003ecomplete review of the No. 102\u003c\/a\u003e on the Highland Woodworking Blog.\u003c\/p\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821475893530,"sku":"434205","price":170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434205.png?v=1760483955"},{"product_id":"lie-nielsenblockplanereplacementiron","title":"Lie-Nielsen Block Plane Replacement Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Lie-Nielsen Block Plane Replacement Iron\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement iron for the Lie-Nielsen\n   \u003ca data-prev-url=\"\/lie-nielsenno102bronzeLow Angleblockplane.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/lie-nielsenno102bronzeLow%20Angleblockplane.aspx\"\u003e\n    No. 102 Low Angle\n   \u003c\/a\u003e\n   and\n   \u003ca data-prev-url=\"\/lie-nielsenno103bronzestandardangleblockplane.aspx\" href=\"\/products\/lie-nielsenno103bronzestandardangleblockplane\"\u003e\n    No. 103 Standard-Angle Block Planes\n   \u003c\/a\u003e\n   . Comes with a 25° flat ground bevel. Blade is 1.250\" wide x 0.125\" thick A2 cryogenically treated Tool Steel.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821475959066,"sku":"434207","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434207d.jpg?v=1768338441"},{"product_id":"lie-nielsensmallscrapingplane25tpitoothingblade","title":"Lie-Nielsen Small Scraping Plane 25 tpi Toothing Blade","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Lie-Nielsen Small Scraping Plane 25 tpi Toothing Blade\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Optional toothing blades for the Lie-Nielsen Small Scraping Planes score surfaces for veneering (with hide glue or slow-setting glues).  They also smooth \u0026amp; flatten extremely wild-grained wood prior to sanding to a clean finish. No. 121 optional  25 TPI blade is 1-3\/8\" wide x 1\/8\" thick.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821476221210,"sku":"434223","price":68.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434223d.jpg?v=1768338446"},{"product_id":"lie-nielsendovetailsaw","title":"Lie-Nielsen Dovetail Saw","description":"\u003cp\u003eModeled on 19th century joinery saws, these are among the best you can buy for dovetailing and carcass joinery. Beveled brass backs lend perfect heft and stiffness, so they cut with virtually no added pressure from you. Each saw comes with use and maintenance tips.\u003c\/p\u003e\n\u003cp\u003eThe \u003cb\u003e Standard Dovetail Saw \u003c\/b\u003e has a 0.020\" steel plate with 15 ppi filed to a rip profile, set only 0.003\" either way, taking a kerf less than 1\/32\" (0.026\") and making an excellent balance between speed and cut quality. The blade is 10\" x 1-5\/8\" to the back; overall it's 15\" x 4-1\/4\".\u003c\/p\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821484216602,"sku":"134369","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134369.png?v=1759351314"},{"product_id":"lie-nielsencarcasssawmaple","title":"Lie-Nielsen Carcass Saw","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lie-Nielsen Carcass Saw\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Modeled on 19th century joinery saws, these are among the best you can buy for dovetailing \u0026amp; carcass joinery.\n Beveled brass backs lend perfect heft and stiffness, so they cut with virtually no added pressure from you.\n   \u003c!-- Generously proportioned handles are made from curly maple.--\u003e\n   The Carcass Saw blade is 0.020\" thick with a 14 ppi\n (crosscut) tooth and a very fine .003\" set per side. Usable blade is 14\" long by 2-1\/4\" to the brass\n back. Overall it's 19\" long by 4-7\/8\" high. Each saw comes with use and maintenance tips.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821484282138,"sku":"134370","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/459002d.jpg?v=1768339977"},{"product_id":"lie-nielsendowelplate","title":"Lie-Nielsen Dowel Plate","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   This simple, old-fashioned tool lets you make your own dowels in any kind of wood you please, in 7 common and useful sizes. Operation is quite simple: split, whittle or shave\n a dowel or tenon blank to rough size, then drive it through the target hole in the dowel plate to produce an accurately dimensioned dowel. Though it's a simple tool, it's Lie-Nielsen;\n the plate is milled from A2 tool steel hardened \u0026amp; tempered to Rc60, with two mounting screw holes provided. Plate is 5-3\/16\" long x 1-1\/2\u0026amp;Quot; wide x 1\/4\" thick.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Types\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    \u003cb\u003e\n     Inch Plate\n    \u003c\/b\u003e\n    has 1\/8\", 3\/16\", 1\/4\", 5\/16\", 3\/8\", 1\/2\" \u0026amp; 5\/8\" holes.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    \u003cb\u003e\n     Metric Plate\n    \u003c\/b\u003e\n    has 3mm, 4mm, 6mm, 8mm, 10mm, 12mm \u0026amp; 16mm holes.\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n  \u003ch3 style=\"background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   \u003ca href=\"http:\/\/blog.woodworkingtooltips.com\/2012\/11\/the-lie-nielsen-dowel-plate-the-little-details-make-all-the-difference\/\" target=\"_blank\"\u003e\n    Read Lee Laird's review of the Lie-Nielsen Dowel Plate\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Inch","offer_id":50821572657434,"sku":"434293","price":108.0,"currency_code":"USD","in_stock":true},{"title":"Metric","offer_id":50821572690202,"sku":"134094","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434293d_d4d96889-59f9-4c19-82d4-04f3450f8044.jpg?v=1768340541"},{"product_id":"lie-nielsensmallbronzecurvedspokeshave","title":"Lie-Nielsen Small Bronze Spokeshaves","description":"\u003cp\u003eThe inspiration for Lie-Nielsen's first spokeshave was a small shave made by Preston, the now defunct English firm famous for its metal shoulder planes. Despite its petite appearance, this spokeshave feels surprisingly heavy in the hand, and cuts with a sureness that will come as a revelation to those used to run-of-the-mill cast iron spokeshaves. The 1\/8\" thick A2 steel blade seats firmly on a fully-machined bronze bed that supports it right up to the cutting edge. Curved sole has a 1-1\/2\" radius. It is 6-3\/4\" long with a 1-3\/8\" wide iron.\u003c\/p\u003e\n\u003cp\u003eThe Small Bronze Spokeshave is available with either a \u003cb\u003e flat sole \u003c\/b\u003e or a \u003cb\u003e curved sole\u003c\/b\u003e. The flat sole spokeshave is for shaping flat or convex surfaces. The curved sole spokeshave is for shaping concave surfaces. It is curved front-to-back in radius of approximately 1-1\/2\". This curved spokeshave works best for relatively tight curves. If you are shaping a gently curved concave surface, you might consider the \u003ca data-prev-url=\"\/lie-nielsenboggsflatspokeshave.aspx\" href=\"\/products\/lie-nielsenboggsflatspokeshave\"\u003eLie-Nielsen Boggs Curved Spokeshave\u003c\/a\u003e.\u003c\/p\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Flat","offer_id":50821596610842,"sku":"434290","price":150.0,"currency_code":"USD","in_stock":true},{"title":"Curved","offer_id":50821596643610,"sku":"434291","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434291d.jpg?v=1776167824"},{"product_id":"lie-nielsenboggsflatspokeshave","title":"Lie-Nielsen Boggs Spokeshaves","description":"\u003cp\u003eLie-Nielsen collaborated with Kentucky master chairmaker, Brian Boggs, and the results are physically beautiful tools with outstanding performance. The 1\/8\" thick, 2\" wide A2 steel blade has a lovely (and comfortable) radiused back edge. The blade's thickness and the fact that it is held in place between a fully-machined bed and a flat cap iron (rather than pivoting bars) make it much less prone to chatter or tearout than other shaves we've used. The bronze body and hickory handles are beautifully e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif;\"\u003executed, and the oversized knurled thumbscrews make setup less of a trial.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-right: 30px; float: left;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434295D.png?v=1760229075\" width=\"277\" height=\"222\"\u003e\u003c\/div\u003e\n\u003ch5\u003eFlat Bottom Spokeshave\u003c\/h5\u003e\n\u003cp\u003eThe Flat Bottom Spokeshave is used for shaping flat or convex surfaces. It is 10-1\/2\" long with a 1\" flat sole. Weighs 12 ounces.\u003c\/p\u003e\n\u003ch5\u003eCurved Bottom Spokeshave\u003c\/h5\u003e\n\u003cp\u003eThe Curved Bottom Spokeshave has a \u003ci\u003e very slight \u003c\/i\u003e curve (approximately 5\" radius) curve from front to back on the sole. It is used for shaping inside curves. The 5\" radius curve will work well for shaping inside curves up to 10\". If you need to work a tigher radius, you can modify the sole. You might also consider the \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/lie-nielsensmallbronzecurvedspokeshave.aspx\" href=\"\/products\/lie-nielsensmallbronzecurvedspokeshave\"\u003eLie-Nielsen Small Bronze Spokeshave\u003c\/a\u003e for small radius work. (It has a 1-1\/2\" radius.) The Curved Bottom Spokeshave is 10-1\/2\" long and weighs 12 ounces.\u003c\/p\u003e\n\u003cp style=\"font-style: italic;\"\u003e \u003c\/p\u003e\n\u003cp style=\"font-style: italic;\"\u003eIf you are concerned that you received a flat spokeshave instead of the curved spokeshave you ordered, please check the sole front-to-back with a straight edge.\u003c\/p\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Flat Bottom","offer_id":50821596872986,"sku":"434294","price":178.0,"currency_code":"USD","in_stock":true},{"title":"Curved Bottom","offer_id":50821596905754,"sku":"434295","price":208.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434295B.png?v=1759512899"},{"product_id":"lie-nielsenmediumshoulderplaneiron","title":"Lie-Nielsen Medium Shoulder Plane Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lie-Nielsen Medium Shoulder Plane Iron\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   3\/4\" wide replacement iron for\n   \u003ca data-prev-url=\"\/lie-nielsenmediumshoulderplane.aspx\" href=\"\/products\/lie-nielsenmediumshoulderplane\"\u003e\n    Lie-Nielsen Medium Shoulder Plane\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821652513050,"sku":"134070","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134070d.jpg?v=1768340802"},{"product_id":"lie-nielsenconvexsoleblockplaneiron","title":"Lie-Nielsen Convex Sole Block Plane Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lie-Nielsen Convex Sole Block Plane Iron\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement iron for\n   \u003cb\u003e\n    Lie-Nielsen Convex Sole Block Plane\n   \u003c\/b\u003e\n   (134089).\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821652709658,"sku":"134090","price":52.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/ln_logo_52aa9ad1-9dba-46f8-bb57-cf8ddaaeca92.jpg?v=1751678579"},{"product_id":"lie-nielsenbladeforstanley9-12post-1988","title":"Lie-Nielsen Blade for Stanley 9-1\/2 - Post-1988","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lie-Nielsen Blade for Stanley 9-1\/2, Post-1988\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Lie-Nielsen blade for Stanley 9-1\/2, Post-1988.  1-5\/8\" wide, 5\/8\" slot, 3 notches.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821660082458,"sku":"134058","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/ln_logo_69e3cfb9-674f-4ea4-981b-4e793d97f6df.jpg?v=1751678729"},{"product_id":"lie-nielsen14pointedbladeforl-nrouterplane","title":"Lie-Nielsen 1\/4 inch  Pointed Blade for L-N 271 Router Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lie-Nielsen 1\/4\" Pointed Blade for L-N Router Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   1\/4\" Pointed Tip blade for\n   \u003ca data-prev-url=\"\/lie-nielsenrouter271plane.aspx\" href=\"\/products\/lie-nielsenrouter271plane\"\u003e\n    Lie-Nielsen 271 Router Plane\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821675680026,"sku":"134134","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134134d.jpg?v=1768340925"},{"product_id":"lie-nielsen332pointedbladeforl-nrouterplane","title":"Lie-Nielsen 3\/32 inch Pointed Blade for L-N 271 Router Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lie-Nielsen 3\/32\" Pointed Blade for L-N Router Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   3\/32\" Pointed Tip blade for\n   \u003ca data-prev-url=\"\/lie-nielsenrouter271plane.aspx\" href=\"\/products\/lie-nielsenrouter271plane\"\u003e\n    Lie-Nielsen 271 Router Plane\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821675778330,"sku":"134135","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134135d.jpg?v=1768340926"},{"product_id":"lie-nielsen332squarebladeforl-nrouterplane","title":"Lie-Nielsen 3\/32 inch  Square Blade for L-N 271 Router Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lie-Nielsen 3\/32 inch Square Blade for L-N Router Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   3\/32” Square Tip blade for\n   \u003cb\u003e\n    Lie-Nielsen 271 Router Plane\n   \u003c\/b\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821675909402,"sku":"134136","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134136d.jpg?v=1768340926"},{"product_id":"lie-nielsenno49tongueandgrooveplanereplacementblade","title":"Lie-Nielsen No. 49 Tongue and Groove Plane Replacement Blade","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lie-Nielsen No. 49 Tongue and Groove Plane Replacement Blade\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement blade for the Lie-Nielsen No. 49 Tongue and Groove Plane.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821795676442,"sku":"134171","price":52.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134171.jpg?v=1751683568"},{"product_id":"lie-nielsenno60-12rn-rabbetblockplanewithnicker","title":"Lie-Nielsen No. 60-1\/2RN Low Angle Rabbet Block Plane with Nicker","description":"\u003cp\u003eLie-Nielsen's No. 60-1\/2RN Rabbet Block Plane is a Low Angle (12°) block plane with open sides and an iron shaped for rabbeting and trimming joints to perfection. The sharp nicker slices the wood when planing across the grain for a smooth cut. Iron and sole are 1-3\/4\" wide; total length is 6-1\/4\". The body is unbreakable ductile iron, and the lever cap is polished bronze. Weighs 1-3\/4 lbs. Made in the U.S.A.\u003c\/p\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821836112154,"sku":"134180","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134180B.png?v=1759527398"},{"product_id":"lie-nielsen71routerplaneadapater","title":"Lie-Nielsen 71 Router Plane Adapter","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lie-Nielsen 71 Router Plane Adapter\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This adapter, when inserted into the Lie-Nielsen No. 71 router plane, will let you use the full range of blades for the smaller Lie-Nielsen 271 Router Plane.  So in effect your \nlarger No. 71 router plane gets transformed by now being able to use the smaller sized blades designed for the L-N 271 router plane. This is just a carrier,\n   \u003cb\u003e\n    blades are sold seperately \nand are NOT included\n   \u003c\/b\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821836669210,"sku":"134177","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134177d.jpg?v=1768341564"},{"product_id":"lie-nieslen-101-violin-makers-plane","title":"Lie-Nielsen No. 101 Bronze Violin Maker's Block Plane","description":"\u003cp\u003eWhile traditionally called a Violin Maker's Plane, this pocket-sized block plane will find many uses for any woodworker who appreciates exquisite tools for fine applications. The 101 Violin Maker's Plane is Lie-Nielsen's 2012 upgraded version of the old Stanley 101 block plane. Lie-Nielsen added a bronze body and cap, a cryo-treated A2 steel blade and a precision blade depth adjuster. It's the perfect plane for fine detail work and it's small enough to fit in your pocket.\u003c\/p\u003e\n\u003cp\u003eThe 1\/8\" thick x 7\/8\" wide iron is bedded at 18° and secured in milled grooves for total stability. Depth of cut is adjusted mechanically with stainless steel hardware. Bronze body is 1-3\/16\" wide by 3-7\/16\" long, with highly polished bronze cap. Weighs 1\/2 lb.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch5 style=\"background: #D6CBB5; padding: 2px 4px;\"\u003eAdditional Information\u003c\/h5\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/blog.woodworkingtooltips.com\/2012\/11\/the-plane-facts-lie-nielsen-101-violin-makers-plane-just-dont-let-the-name-fool-you\/\" target=\"_blank\"\u003eRead Lee Laird's review of the Lie-Nielsen No. 101 Bronze Violin Maker's Block Plane\u003c\/a\u003e\u003c\/p\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821844599066,"sku":"134182","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134182.jpg?v=1776165916"},{"product_id":"lie-nielsen16tenonripsaw","title":"Lie-Nielsen 16 inch Tenon Rip Saw","description":"\u003cp\u003eTraditional tenon saws are distinguished from dovetail saws by their size. The longer, wider blades saw faster through much deeper cuts. There are fewer teeth for sawing through tenon cheeks and other stock that is far thicker than is usually encountered in dovetails. The Lie-Nielsen Tenon Rip Saw is considerably beefier than Lie-Nielsen's acclaimed dovetail and carcass saws, but it's built to the same high standards of quality and finish.\u003c\/p\u003e\n\u003cp\u003eMost of your time sawing tenons is spent cutting the cheeks along the grain, so this model is filed for rip cuts: 11 ppi, with nearly vertical tooth faces. The solid brass backs maintain tension for straight, precise, sawing. A classic Disston pattern handle completes the package.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul style=\"margin: -2px 0px 10px 0px;\"\u003e\n\u003cli\u003eBlade Length - 16\"\u003c\/li\u003e\n\u003cli\u003eOverall Length - 21-1\/4\"\u003c\/li\u003e\n\u003cli\u003eDepth of Cut - 3\"\u003c\/li\u003e\n\u003cli\u003ePlate Thickness - 0.032\"\u003c\/li\u003e\n\u003cli\u003eTooth Set - 0.004\" each way\u003c\/li\u003e\n\u003cli\u003eTooth Pattern - 11 ppi Rip\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Maple Handle","offer_id":50821859377434,"sku":"134172","price":265.0,"currency_code":"USD","in_stock":false},{"title":"Cherry Handle","offer_id":50821859410202,"sku":"134365","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134365.jpg?v=1776136255"},{"product_id":"lie-nielsen-ductile-iron-holdfast","title":"Lie-Nielsen Ductile Iron Holdfast","description":"\u003cp\u003eLie-Nielsen's simple, elegant holdfast is great for any hand tool woodworker. It is cast from ductile iron and treated with a hot oil finish. It fits into 3\/4 inch dog holes and will hold your workpiece firmly in place with just a tap from your mallet. (You may not even have to do that. We found that it will hold even if you just drop it into the dog hole.) All it takes to remove it is a tap on the back.\u003c\/p\u003e\n\u003cp\u003eThe holdfast works well in benches up to 4 inches thick. In benches thicker than 4 inches, you may have to relieve the bottom of the dog hole for the holdfast to grip properly.)\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOverall length - 13 inches\u003c\/li\u003e\n\u003cli\u003eReach - 7-1\/4 inches\u003c\/li\u003e\n\u003cli\u003e2.1 lb\u003c\/li\u003e\n\u003cli\u003eFits 3\/4 inch (19 mm) dog holes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821861998874,"sku":"134412","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134412d.jpg?v=1776134832"},{"product_id":"lie-nielsen-tapered-saws","title":"Lie-Nielsen Tapered Saws","description":"\u003cp\u003eLie-Nielsen's Tapered Saws combine all of the best features they've developed in their other backsaws over the years. They use thin plates for fast, precise cuts with less effort. The tapered blade helps eliminate the frustration of cutting through your depth line on the back of the workpiece. When you reach the depth line on the front of your workpiece the tip of the saw should be above the line on the back.\u003c\/p\u003e\n\u003cp\u003eLie-Nielsen uses only the best materials and manufactures every part of their saws in-house. The polished Swedish steel blade is cut, set and mounted in a solid brass milled back. The completed blade is fitted with a beautiful handle. Finally, each saw is filed by hand and tested. All of this happens in one room at the Lie-Nielsen factory. We snapped pictures of the \u003ca data-prev-url=\"http:\/\/highlandwoodworking.com\/blasts2013\/LNfactorytour.html#saws\" href=\"https:\/\/info.highlandwoodworking.com\/blasts2013\/LNfactorytour.html\" title=\"Tapered Backsaws in production\"\u003e Tapered Backsaws in production\u003c\/a\u003e on one of our trips to the Lie-Nielsen factory. Regardless of which tapered backsaw you select, you can be confident with Lie Nielsen's lifetime guarantee against defects in materials or workmanship.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e The Dovetail Saw \u003c\/strong\u003e is based on a British saw made in 1930. Dovetailing is primarily a ripping operation, so Lie-Nielsen files the teeth of this saw in a rip configuration with 15 points per inch. This setup balances speed and cut quality. Overall height 4-1\/4\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e The Carcass Saw \u003c\/strong\u003e has 14 points per inch - filed for crosscut. It is used for cutting tenon shoulders and other crosscut operations. This is a good complement to the Dovetail Saw. Overall height 5\".\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e The Tenon Saw \u003c\/strong\u003e is based on a Henry Disston saw from the early 1900's. Like the Dovetail saw, it is configured for precise rip cuts. However, it has a wider blade and slightly coarser teeth so it can handle the deeper cuts required for tenons. The teeth are filed for a rip cut with 11 points per inch. Overall height 6\".\u003c\/p\u003e\n\u003c!--Modeled on 19th century joinery saws, these are the best you can buy for dovetailing \u0026 carcass joinery. Beveled brass backs\n lend perfect heft and stiffness, so they cut with virtually no added pressure from you. Generously proportioned handles\n are available in curly maple or cocobolo. The Carcass Saw has 14 tpi (crosscut) with very fine .003\" set per side.\n Usable blade is 11\" long by 2-5\/16\" to the brass back. Overall it's 16\" long by 4-7\/8\" high. Each saw comes with use\n and maintenance tips.--\u003e\n\u003ctable class=\"hwpt\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth rowspan=\"2\"\u003eSaw\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eTooth\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ePPI\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eSet\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003ePlate \u003cbr\u003eThickness\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eBlade \u003cbr\u003eLength\u003c\/th\u003e\n\u003cth rowspan=\"2\"\u003eOAL\u003c\/th\u003e\n\u003cth colspan=\"2\"\u003eCut Depth\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeel\u003c\/th\u003e\n\u003cth\u003eToe\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDovetail\u003c\/td\u003e\n\u003ctd\u003eRip\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003e.003\"\u003c\/td\u003e\n\u003ctd\u003e.015\"\u003c\/td\u003e\n\u003ctd\u003e10\"\u003c\/td\u003e\n\u003ctd\u003e15\"\u003c\/td\u003e\n\u003ctd\u003e1-5\/8\"\u003c\/td\u003e\n\u003ctd\u003e1-3\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarcass\u003c\/td\u003e\n\u003ctd\u003eCrosscut\u003c\/td\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003e.003\"\u003c\/td\u003e\n\u003ctd\u003e.015\"\u003c\/td\u003e\n\u003ctd\u003e14\"\u003c\/td\u003e\n\u003ctd\u003e19\"\u003c\/td\u003e\n\u003ctd\u003e2-1\/4\"\u003c\/td\u003e\n\u003ctd\u003e2\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTenon\u003c\/td\u003e\n\u003ctd\u003eRip\u003c\/td\u003e\n\u003ctd\u003e11\u003c\/td\u003e\n\u003ctd\u003e.004\"\u003c\/td\u003e\n\u003ctd\u003e.020\"\u003c\/td\u003e\n\u003ctd\u003e16\"\u003c\/td\u003e\n\u003ctd\u003e21-1\/4\"\u003c\/td\u003e\n\u003ctd\u003e3\"\u003c\/td\u003e\n\u003ctd\u003e2-5\/8\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Dovetail Saw - Cherry Handle","offer_id":50821885821210,"sku":"134366","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Carcass Saw - Cherry Handle","offer_id":50821885853978,"sku":"134367","price":189.0,"currency_code":"USD","in_stock":true},{"title":"Tenon Saw - Maple Handle","offer_id":50821885886746,"sku":"134343","price":265.0,"currency_code":"USD","in_stock":true},{"title":"Tenon Saw - Cherry Handle","offer_id":50821885919514,"sku":"134368","price":265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/LNTaperedSaws.png?v=1759352900"},{"product_id":"lie-nielsen-honing-guide","title":"Lie-Nielsen Side-Clamp Honing Guide","description":"\u003cp\u003eLie-Nielsen has turbo-charged both the design and quality of the long lived, economy made, side-clamp style honing guides. While patterned after the popular Eclipse honing guide, Lie Nielsen has perfected every detail and added their own ingenuity like designing \u003ca data-prev-url=\"\/accessory-jaws-lie-nielsen-honing-guide.aspx\" href=\"\/products\/accessory-jaws-lie-nielsen-honing-guide\" target=\"_blank\"\u003e replaceable jaws \u003c\/a\u003e so you can sharpen a more complete range of blades and chisels.\u003c\/p\u003e\n\u003cp\u003eImpeccably crafted from stainless steel, this Lie Nielsen guide has a bronze bearing for long life. A finely threaded main screw precisely moves the guide's standard jaws (included with the Honing Guide) for clamping to the edges of your irons up to 3\" wide and for chisels as narrow as 1\/4\". A brass knurled knob with driver slot lets you snug the guide's jaws in place. Unlike honing jigs with a wide wheel, this jig's narrower wheel makes it easy to steer the jig with finger pressure, should you want to add camber or ease the outside corners of your irons.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n\u003cp\u003e\u003ca data-prev-url=\"\/library\/lie-nielsen\/LN-honing-guide-instructions.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/lie-nielsen\/LN-honing-guide-instructions.pdf\"\u003e Lie-Nielsen Honing Guide Instructions \u003c\/a\u003e (PDF)\u003c\/p\u003e\n\u003cp\u003eLee Laird from Lie Nielsen Tools Works produces an \u003ca data-prev-url=\"\/lee-laird-s-hand-plane-fundamentals-series.aspx\" href=\"\/pages\/custom-lee-laird-s-hand-plane-fundamentals-series\" target=\"_blank\"\u003e instructional series \u003c\/a\u003e on hand tools and has much more to say about Lie-Nielsen's Honing Guide. Read Lee's \u003ca href=\"http:\/\/blog.woodworkingtooltips.com\/2016\/02\/the-plane-facts-the-lie-nielsen-honing-guide\/\" target=\"_blank\"\u003e complete review of the Lie Nielsen Honing Guide \u003c\/a\u003e on the Highland Woodworking Blog.\u003c\/p\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Honing Guide with Standard Jaws","offer_id":50821887361306,"sku":"134501","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134501d.jpg?v=1768341951"},{"product_id":"accessory-jaws-lie-nielsen-honing-guide","title":"Accessory Jaws for the Lie-Nielsen Honing Guide","description":"\u003cbody\u003e\n  \u003cp\u003e\n   In addition to the standard jaws which come with the Lie-Nielsen Honing Guide, an array\n of replaceable jaws are also available. These optional accessory jaws let you clamp a\n greater range of irons \u0026amp; chisels into the jig including some specialized L-N cutters.\n The jaws for the Honing Guide are designed so you can easily remove them and then attach\n another set of jaws in their place while retaining perfect alignment. All Lie Nielsen Jaws\n are precision machined from stainless steel and sold in pairs.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Chisel Jaws\n   \u003c\/strong\u003e\n   hold chisels 3\/16\" and narrower.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Mortise Chisel Jaws\n   \u003c\/b\u003e\n   (tall jaws) hold mortise chisels and thick blades.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Long Jaws\n   \u003c\/strong\u003e\n   hold very short blades.The long jaws are reversible.\n   \u003cbr\u003e\n   (The short end hones a bevel up to 40° and the long end hones a bevel up to 30°)\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    18° Skewed Jaws LH\n   \u003c\/strong\u003e\n   fit Lie-Nielsen No. 140 Skew Block Plane (left hand).\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    18° Skewed Jaws RH\n   \u003c\/strong\u003e\n   fit Lie-Nielsen No. 140 Skew Block Plane (right hand).\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    30° Skewed Jaws LH\n   \u003c\/strong\u003e\n   fit Lie-Nielsen No. 98\/99 Side Rabbet Planes (left hand).\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    30° Skewed Jaws RH\n   \u003c\/strong\u003e\n   fit Lie-Nielsen No. 98\/99 Side Rabbet Planes (right hand).\n  \u003c\/p\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n  \u003cp\u003e\n   Learn more about Lie-Nielsen's Honing Guide and the replaceable jaws in Lee Laird's\n   \u003ca href=\"http:\/\/blog.woodworkingtooltips.com\/2016\/02\/the-plane-facts-the-lie-nielsen-honing-guide\/\" target=\"_blank\"\u003e\n    complete review of the Lie Nielsen Honing Guide\n   \u003c\/a\u003e\n   on the Highland Woodworking Blog.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Chisel Jaws","offer_id":50821923963162,"sku":"134502","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Mortise Chisel Jaws","offer_id":50821923995930,"sku":"134503","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Long Jaws","offer_id":50821924028698,"sku":"134504","price":45.0,"currency_code":"USD","in_stock":true},{"title":"18 Degree LH Skew Jaws","offer_id":50821924061466,"sku":"134505","price":45.0,"currency_code":"USD","in_stock":true},{"title":"18 Degree RH Skew Jaws","offer_id":50821924094234,"sku":"134506","price":45.0,"currency_code":"USD","in_stock":true},{"title":"30 Degree LH Skew Jaws","offer_id":50821924127002,"sku":"134507","price":45.0,"currency_code":"USD","in_stock":true},{"title":"30 Degree RH Skew Jaws","offer_id":50821924159770,"sku":"134508","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134502d.jpg?v=1768342148"},{"product_id":"toothed-blade-for-l-n-adjustable-mouth-block-plane","title":"Toothed Blade for L-N Adjustable-Mouth Block Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Toothed Blade for Lie-Nielsen Adjustable-Mouth Block Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Toothed blades have small chisel-like teeth .030\" (.762mm) wide, and spaced .030\" apart.\n They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Caution: Toothed blades are great for quick, heavy stock removal. However, something like a knot in pine can break the teeth so be careful around difficult spots.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50822012174618,"sku":"134030","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134030d.jpg?v=1768342730"},{"product_id":"lie-nielsen-blade-for-small-bronze-spokeshave","title":"Lie-Nielsen Blade for the Small Bronze Spokeshave","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lie-Nielsen Blade for the Small Bronze Spokeshave\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement blade for the Lie-Nielsen Flat or Curved Sole Small Bronze Spokeshaves. The blade comes with a 25° flat ground bevel, 1.375\" wide x .125\" thick, A2 cryogenically treated Tool Steel.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50822012403994,"sku":"134007","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134007d.jpg?v=1768342732"},{"product_id":"lie-nielsenno3castironsmoothplane","title":"Lie-Nielsen No. 3 Cast Ductile  Iron Smooth Plane","description":"\u003cp\u003eLie-Nielsen's collection of bench planes, arguably the most beautiful ever made, is now the most complete currently in production, covering the gamut from the magnificent No. 8 Jointer to the irresistible little No. 1. Numbers 1 \u0026amp; 2 are fully functional planes, though their exquisite miniaturization and historical rarity makes them as interesting to collectors as they are to working hand tool enthusiasts.\u003c\/p\u003e\n\u003cp\u003eEach of these planes features meticulous construction, low-tolerance machining and Bed Rock body and frog design. Soles and sides are milled reliably flat and square, and their finish is so smooth that they hardly need more than a well-buffed coat of wax to be practically friction-free. Bed Rock castings, both sole and side rails, are considerably heavier than those of Bailey-style planes, and the frog in particular is radically more stable, supportive and adjustable. The throat opening can be altered without removing the iron, which remains supported all the way to the heel of the bevel regardless of how tight a throat you set. Lie-Nielsen irons are likewise heavier and more carefully processed than run-of-the-mill tools. They're tempered to Rc 60-62 for excellent edge longevity, and the rigidity afforded by their 1\/8\" thickness makes their performance simply outstanding. These planes cut beautifuly where others fail: reversed grain, quilted or fiddleback timbers, even knots and end grain can be shaved cleanly, with no tearout, no chatter, no loss of control at all.\u003c\/p\u003e\n\u003cp\u003eThe smaller plane sizes up to No. 4 are cast in silicon bronze, larger sizes in cast ductile iron (note that 2s, 3s \u0026amp; 4s are also available in cast ductile iron). On all sizes, the handle and front knob are gloss-finished cherry, and the lever caps are gleaming bronze.\u003c\/p\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":51773342777626,"sku":"434265","price":360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434265.jpg?v=1776134174"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/collections\/LNHandToolsdrawing.jpg?v=1774115628","url":"https:\/\/www.highlandwoodworking.com\/collections\/lie-nielsen-hand-tools.oembed?page=5","provider":"Highland Woodworking","version":"1.0","type":"link"}