{"title":"Rabbet, Shoulder and Bullnose Planes","description":"\u003cdiv\u003e\n\u003c\/div\u003e\n\n\n\n\n","products":[{"product_id":"lie-nielsenlargeshoulderplane","title":"Lie-Nielsen Large Shoulder Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Lie-Nielsen Large Shoulder Plane 073\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Lie Nielsen's large shoulder plane is a fine tuning of Record's 073 model which was based on the Preston shoulder plane from the early 1900s.\n Record acquired Preston in the 1930s, but quit manufacturing shoulder planes in 1990s. Shoulder planes are related to rabbet and bullnose planes,\n in that the iron extends side to the side through the sole so it can cut fully into the junction of an inner corner. Shoulder planes, however, are\n more precise tools than the other planes in the group, capable of taking fine shavings and designed with a low blade angle for finer cuts across the grain.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Lie Nielsen's large shoulder plane weighs in at 4 lbs making it the heaviest in the series of three shoulder planes they manufacture. If choosing between the\n   \u003ca data-prev-url=\"\/lie-nielsensmallshoulderplane.aspx\" href=\"\/products\/lie-nielsensmallshoulderplane\" target=\"_blank\"\u003e\n    small\n   \u003c\/a\u003e\n   ,\n   \u003ca data-prev-url=\"\/lie-nielsenmediumshoulderplane.aspx\" href=\"\/products\/lie-nielsenmediumshoulderplane\" target=\"_blank\"\u003e\n    medium\n   \u003c\/a\u003e\n   or large shoulder\n plane, the large plane will probably cover the broadest range of tasks in your shop. Capable of fine cuts at sharp angles, the large shoulder plane is perfect tool\n to trim shoulders on tenons, create or increase the depth of rabbets, and both remove and clean up additional material from a dado, just to name a few uses. The\n throat adjustment screw housed in the nose is threaded into the body, enabling it to set the opening wider or narrower with no manual fiddling required. The\n 8-1\/4\" long body is made of ductile cast iron; the lever cap\/handle is bronze. The 1-1\/4\" iron, bedded at 18°, provides full-width cutting when\n aligned flush with either side.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Body: 8-1\/4\" long x 1-1\/4\" wide.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Blade: 1-1\/4\" wide x .140\" thick\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Weight: 4 lbs. Made in the U.S.A.\n  \u003c\/p\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n  \u003ch3 style=\"background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   Lee Laird from Lie Nielsen Tools Works produces an\n   \u003ca data-prev-url=\"\/lee-laird-s-hand-plane-fundamentals-series.aspx\" href=\"\/pages\/custom-lee-laird-s-hand-plane-fundamentals-series\" target=\"_blank\"\u003e\n    instructional series\n   \u003c\/a\u003e\n   on hand\n plane use and care and has much more to say about Lie-Nielsen's Large Shoulder Plane. Read Lee's article about using the\n   \u003ca href=\"http:\/\/blog.woodworkingtooltips.com\/2013\/12\/december-lie-nielsen-tool-of-the-month-large-shoulder-plane-073\/\" target=\"_blank\"\u003e\n    Lie Nielsen Large Shoulder Plane Model 073\n   \u003c\/a\u003e\n   on the Highland Woodworking Blog.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821475533082,"sku":"434247","price":365.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434247d.jpg?v=1768338443"},{"product_id":"lie-nielsenlargeshoulderplanereplacementiron","title":"Lie-Nielsen Large Shoulder Plane Replacement Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Lie-Nielsen Large Shoulder Plane Replacement Iron\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement iron for the Lie-Nielsen Large Shoulder Plane.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821475598618,"sku":"434248","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/434248d.jpg?v=1768338441"},{"product_id":"primusdeluxerabbetplanereplacementiron","title":"Replacement Iron for ECE 30mm Primus Deluxe Rabbet Plane","description":"\u003cbody\u003e\n \n  \u003cdiv id=\"right\"\u003e\n   \u003cimg alt=\"ECE 2709 Fit\" data-prev-url=\"\/ProductImages\/handplanes\/ece\/431433-fit-200-141.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/handplanes\/ece\/431433-fit-200-141.jpg\"\u003e\n   \u003cbr\u003e\n   Emmerich 710 P Plane\n   \u003cbr\u003e\n   \u003cspan style=\"font-size:0.9em;\"\u003e\n    (710 is the same design with a hornbeam sole)\n   \u003c\/span\u003e\n  \u003c\/div\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Replacement Iron for ECE 30mm Primus Deluxe Rabbet Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement iron for the E.C Emmerich model 710 and 710 P Primus Deluxe Rabbet Planes with steel adjusting mechanism.\n  \u003c\/p\u003e\n  \u003cp style=\"margin-bottom:100px;\"\u003e\n   These planes use a 30mm wide double iron (cutting iron with cap iron - cap iron not included) that is held in place and adjusted with a steel mechanism.\n  \u003c\/p\u003e\n  \u003c!--\n\nFits 30mm wide 710 and 710 P Primus Rabbet Planes\n\nUsed with a cap iron\n\nFor ECE Double Iron Wedge Rabbet Planes\n\n\u003cdiv id=\"right\"\u003e\n\u003cimg src=\"\/ProductImages\/handplanes\/ece\/431431-fit-200-397.jpg\" alt=\"ECE 1608 Fit\"\u003e\u003cbr\u003e\nFits these planes\n\u003c\/div\u003e\n\n--\u003e\n \n\u003c\/body\u003e","brand":"E. C. Emmerich Tools","offers":[{"title":"Default Title","offer_id":50821477138714,"sku":"431433","price":55.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/031433.jpg?v=1751674949"},{"product_id":"ecerabbetplanereplacementiron","title":"Replacement Iron for ECE 30mm Single Iron Wedge Rabbet Planes","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Replacement Iron for ECE 30mm Single Iron Wedge Rabbet Planes\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement iron for the E.C. Emmerich model 9 S.30 and 9 SP rabbet planes. Also fits model 58 S Stop Rabbet plane.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   All of these planes use 30mm wide single irons (without cap iron) that is held in place with a wedge.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Fits These Planes\n  \u003c\/h5\u003e\n  \u003cimg alt=\"ECE 1608 Fit\" data-prev-url=\"\/ProductImages\/handplanes\/ece\/431431-fit-550-185.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/handplanes\/ece\/431431-fit-550-185.jpg\"\u003e\n  \u003cbr\u003e\n  \u003c!--\nFits 30mm wide  9 S.30,9 SP rabbet and 58S Stop Rabbet\n\nUsed without a cap iron\n\nmay vary a bit from picture\n\nFor ECE Single Iron Wedge Rabbet Planes\n\n\u003cdiv id=\"right\"\u003e\n\u003cimg src=\"\/ProductImages\/handplanes\/ece\/431431-fit-200-397.jpg\" alt=\"ECE 1608 Fit\"\u003e\u003cbr\u003e\nFits these planes\n\u003c\/div\u003e\n--\u003e\n \n\u003c\/body\u003e","brand":"E. C. Emmerich Tools","offers":[{"title":"Default Title","offer_id":50821477204250,"sku":"431431","price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431431-01d.jpg?v=1768338438"},{"product_id":"cliftonno400rabbetplane","title":"Clifton No. 400 Shoulder Plane","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   The 400 Shoulder Rebate Plane has a fine mouth for cabinetmakers and those more demanding woodworkers\n wanting fine shavings in their precision work. The body is machined from quality grey iron casting, accurately machined and precision ground on the sole\n and the sides. The cutting iron seats smoothly onto machined pads and fits snugly into the body of the plane and held in by a Walnut wedge. Adjustment of\n the cutting iron is done in the traditional manner by tapping the end of the cutting iron and locking the wedge in place. The finish is Bright Ground.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Cutter width  - 7\/16\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Cutter steel - oil hardened tool steel, Rockwell C Hardness 59-61\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Bevel - Primary 25°, secondary 30°\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Plane length - 3-1\/8\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight - .16kg (.34lbs)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Made in Sheffield, England\n  \u003c\/p\u003e\n\n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478154522,"sku":"431161","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431161-01d.jpg?v=1768338452"},{"product_id":"clifton400rabbetplanereplacementiron","title":"Clifton 400 Shoulder Plane Replacement Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton 400 Shoulder Plane Replacement Iron\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement iron for the\n   \u003ca data-prev-url=\"\/cliftonno400rabbetplane.aspx\" href=\"\/products\/cliftonno400rabbetplane\"\u003e\n    Clifton 400 Shoulder Plane\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478220058,"sku":"431162","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431162-01d.jpg?v=1768338456"},{"product_id":"cliftonno410rabbetplane","title":"Clifton No. 410 Shoulder Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton No. 410 Rabbet Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Clifton 410 Shoulder Rebate Plane fills the need for a narrow light and accurate shoulder plane. The body is machined from quality grey\n iron casting and precision ground on the sole and the sides. The lever arm is made of unbreakable malleable iron and fits snugly into the\n body of the plane. The cutting iron fits smoothly onto the machined pads in the body and can be finely adjusted by means of a screw. The\n finish is Bright Ground.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Cutter width  - 11\/16\" (18mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Cutter steel - oil hardened tool steel, Rockwell C Hardness 59-61\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Bevel - Primary 25\u0026amp;deg, secondary 30°\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Plane length - 5-1\/2\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight - .58kg (1.25lbs)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Made in Sheffield, England\n  \u003c\/p\u003e\n  \u003c!--\n\nmfg propaganda\n\nThe Clifton 410 Shoulder Rebate Plane fills the need for a narrow light and accurate shoulder plane. The body is machined from quality grey\n iron casting and precision ground on the sole and the sides. The lever arm is made of unbreakable malleable iron and fits snugly into the\n body of the plane. The cutting iron fits smoothly onto the machined pads in the body and can be finely adjusted by means of a screw. The\n finish is Bright Ground.\n\nSpecification:\nCutter: 11\/16″ (18mm) wide – High Quality Oil Hardened Tool Steel, 59-61 Rockwell “C” Hardness, cutting edge ground to 25 deg. Primary and 30 deg. Secondary.\nLength: 5.1\/2″ (138mm)\nApprox. Weight: 1.1\/4″lbs (0.58kg)\n\nold copy\n\n\u003cp\u003eClifton Tooling continues to create some of the finest steel rabbeting planes available.  These finely crafted tools feature carefully\n machined and polished castings with very narrow throat openings for absolutely minimal tearout.  Though these planes are likely to become\n even more valuable as collectors' items, their functional beauty will earn them a place in many a well-equipped hand tool shop.\u003c\/p\u003e\n\n\u003cp\u003eModel 410's sole is 5-3\/8\" long by 11\/16\" wide. It has a depth of cut adjustment screw and steel lever cap\/handle.\u003c\/p\u003e\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478285594,"sku":"431126","price":316.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431126-01d.jpg?v=1768338440"},{"product_id":"clifton410rabbetplanereplacementiron","title":"Clifton 410 Shoulder Plane Replacement Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton 410 Shoulder Plane Replacement Iron\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement iron for the\n   \u003ca data-prev-url=\"\/cliftonno410rabbetplane.aspx\" href=\"\/products\/cliftonno410rabbetplane\"\u003e\n    Clifton 410 Rabbet Plane\n   \u003c\/a\u003e\n   . Made from 01 Steel, hardened to 62 rockwell C and cryogenically treated.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Sheffield, England.\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\n\nClifton 410 Spare Cutter for the 410 Shoulder Rebate Plane. Made from 01 Steel, hardened to 62 rockwell C and cryogenically treated.\n\nMade in Sheffield.\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478351130,"sku":"431127","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431127-01d.jpg?v=1768338454"},{"product_id":"cliftonno420rabbetplane","title":"Clifton No. 420 Shoulder Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton No. 420 Shoulder Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Clifton 420 Shoulder Rebate Plane fills the need for a light accurate shoulder plane. The body is machined from quality grey iron\n casting and is precision ground on the sole and the sides. The lever arm in made of unbreakable malleable iron and fits snugly into the\n body of the plane. The cutting iron fits smoothly onto the machined pads in the body and can be adjusted by means of a screw.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Cutter width  - 3\/4\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Cutter steel - oil hardened tool steel, Rockwell C Hardness 59-61\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Bevel - Primary 25\u0026amp;deg, secondary 30°\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Plane length - 8\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight - 1.1kg (2.5lbs)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Made in Sheffield, England\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\n\nThe Clifton 420 Shoulder Rebate Plane fills the need for a light accurate shoulder plane. The body is machined from quality grey iron\n casting and is precision ground on the sole and the sides. The lever arm in made of unbreakable malleable iron and fits snugly into the\n body of the plant. The cutting iron fits smoothly onto the machined pads in the body and can be adjusted by means of a screw.\n\nSpecification:\nCutter: ¾” (19mm) wide – High Quality Oil Hardened Tool Steel, 59-61 Rockwell “C” Hardness, cutting edge ground to 25 deg. Primary and 30 deg. Secondary.\nLength: 8″ (200mm)\nApprox. Weight: 2\/1\/2″ (1.1kg)\n\nold copy\n\n\u003cp\u003eClifton Tooling continues to create some of the finest steel rabbeting planes available.  These finely crafted tools feature carefully machined and polished castings with very narrow throat openings\n for absolutely minimal tearout.  Though these planes are likely to become even more valuable as collectors' items, their functional beauty will earn them a place in many a well-equipped hand tool shop.\u003c\/p\u003e\n \n\u003cp\u003eModel 420 is 3\/4\u0026quot; wide by 8\u0026quot; long. It has a depth of cut adjustment screw and steel lever cap\/handle.\u003c\/p\u003e\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478416666,"sku":"431128","price":335.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431128-01d.jpg?v=1768338457"},{"product_id":"clifton420rabbetplanereplacementiron","title":"Clifton 420 Shoulder Plane Replacement Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton 420 Shoulder Plane Replacement Iron\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement iron for the\n   \u003ca data-prev-url=\"\/cliftonno420rabbetplane.aspx\" href=\"\/products\/cliftonno420rabbetplane\"\u003e\n    Clifton 420 Shoulder Plane\n   \u003c\/a\u003e\n   . Made from 01 steel hardened to 62 rockwell C and cryogenically treated.\n  \u003c\/p\u003e\n  \u003c!--\n\nmfg propaganda\n\nClifton 420 Spare Cutter for the Shoulder Plane. Made from 01 steel hardened to 62 rockwell C and cryogenically treated.\n\nMade in Sheffield.\n\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478482202,"sku":"431129","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431129-01d.jpg?v=1768338458"},{"product_id":"clifton3-in-1shoulderrabbetplane","title":"Clifton 3-in-1 Shoulder Rabbet Plane Model 3110","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton 3-in-1 Shoulder Rabbet Plane Model 3110\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Clifton 3110 Plane is an extremely versatile tool combining the features of shoulder rebate, chisel plane and adjustable mouth bull-nose plane.\n As a shoulder plane, the front extension piece is fitted as a chisel plane all nose pieces are removed; and as a bull-nose plane, the thinner nose\n piece is fitted in conjunction with one or both of the precision machined steel shims  to make the mouth size bigger (1\/32″ and 1\/64″) – or for\n very fine work, without either shim.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 3-in-1 plane is designed to perform the functions of three:  it can be used as a conventional rabbet plane (on rabbets up to 1-1\/8\" wide),\n as a bullnose plane for working close into flush corners, or as a chisel plane for working right up to an adjacent surface.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The body is machined from a quality grey iron casting and precision ground on the sole and sides. The lever arm is also of grey iron. The cutting\n iron fits smoothly onto the machined pads in the body and can be adjusted by means of the screw. Bright Ground finish.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Cutter width  - 1-1\/8\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Cutter steel - oil hardened tool steel, Rockwell C Hardness 59-61\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Bevel - Primary 25\u0026amp;deg, secondary 30°\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Plane length - 6\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight - .9kg (2 lbs)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Made in Sheffield, England\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\n\nThe Clifton 3110 Plane is an extremely versatile tool combining the features of shoulder rebate, chisel plane and adjustable mouth bull-nose plane.\n As a shoulder plane, the front extension piece is fitted as a chisel plane all nose pieces are removed; and as a bull-nose plane, the thinner nose\n piece is fitted in conjunction with one or both of the precision machined steel shims  to make the mouth size bigger (1\/32″ and 1\/64″) – or for\n very fine work, without either shim.\n\nThe body is machined from a quality grey iron casting and precision ground on the sole and sides. The lever arm is also of grey iron. The cutting\n iron fits smoothly onto the machined pads in the body and can be adjusted by means of the screw. Bright Ground finish.\n\nSpecification:\nCutter: 1.1\/8″ (29mm) wide – High Quality Oil Hardened Tool Steel, 59-61 Rockwell “C” Hardness, cutting edge ground to 25 deg. Primary and 30 deg. Secondary.\nLength: 6″ (152mm)\nApprox. Weight: 2lbs (0.9kg)\n\nold copy\n\u003cp\u003eClifton Tooling continues to create some of the finest steel rabbeting planes available. These finely crafted tools feature carefully machined\n and polished castings with very narrow throat openings for absolutely minimal tearout.  Though these planes are likely to become even more valuable\n as collectors' items, their functional beauty will earn them a place in many a well-equipped hand tool shop.\u003c\/p\u003e\n\n\u003cp\u003eThis popular plane is designed to perform the functions of three:  it can be used as a conventional rabbet plane (on rabbets up to 1-1\/8\" wide),\n as a bullnose plane for working close into flush corners, or as a chisel plane for working right up to an adjacent surface.\u003c\/p\u003e\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50821478547738,"sku":"431124","price":379.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431124-01d.jpg?v=1768338460"},{"product_id":"kunz75bullnoseplane","title":"Kunz 75 Bullnose Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kunz 75 Bullnose Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Stanley used to make an inexpensive bullnose plane for trim carpenters\ncalled the 75.  With its open sides, its flush iron trims rabbets on window stools, shaves jamb stops on doors and aligns flats on scarf joints.  It fits in a tool pouch so you don't have to climb down the ladder or make yet another trip to the saw.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Kunz makes this excellent copy of the 75 at an attractive price.  The 75 may not be your first choice for your best bench work, but it won't hurt if it gets banged around on the job or if it fails to find its way back to your toolbox.  4\" long, 1-1\/16\" wide.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kunz","offers":[{"title":"Default Title","offer_id":50821634556186,"sku":"179810","price":46.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/179810d.jpg?v=1768340750"},{"product_id":"kunz75bullnoseplanereplacementiron","title":"Kunz 75 Bullnose Plane Replacement Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kunz 75 Bullnose Plane Replacement Iron\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement iron for Kunz 75 Bullnose plane.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kunz","offers":[{"title":"Default Title","offer_id":50821634654490,"sku":"179811","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/kunz_logo_c4b4c95a-1f3f-49b5-a536-89401b6b28b5.jpg?v=1751678221"},{"product_id":"kunz79siderabbetplane","title":"Kunz 79 Side Rabbet Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kunz 79 Side Rabbet Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 79 primarily trims long grain rabbets and grooves so that cabinet backs and drawer bottoms fit better.  With some care and dexterity, it will also widen cross grain dados.\n The 79's opposite-facing blades let you enter a cut from either direction, thus avoiding end grain blowout. An adjustable stop allows cuts down to 9\/16\".\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Overall length 5\".\n  \u003c\/p\u003e\n  \u003c!--\nold copy\n\n\u003cp\u003eWhen Stanley unexpectedly discontinued the 79, our phones rang off the hook with folks looking to get one. Unfortunately, supply soon ran out. Thankfully, Kunz of Germany has recently reintroduced the 79.\u003c\/p\u003e\n\n\u003cp\u003eThe 79 primarily trims long grain rabbets and grooves so that cabinet backs and drawer bottoms fit better.  With some care and dexterity, it will also widen cross grain dados.\n The 79's opposite-facing blades let you enter a cut from either direction, thus avoiding end grain blowout. An adjustable stop allows cuts down to 9\/16\u0026quot;.\u003c\/p\u003e\n\n\u003cp\u003eAlthough the machining is better than on late model Stanleys, you will have to remove the paint from the depth stop, skate and the back of the tool so you don't wind up with green streaks all over the job.  Overall length 5\".\u003c\/p\u003e\n\n\n--\u003e\n \n\u003c\/body\u003e","brand":"Kunz","offers":[{"title":"Default Title","offer_id":50821634752794,"sku":"179808","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/179808d.jpg?v=1768340751"},{"product_id":"kunz79siderabbetplanereplacementirons","title":"Kunz 79 Side Rabbet Plane Replacement Irons","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kunz 79 Side Rabbet Plane Replacement Irons\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Pair of replacement irons for the Kunz 79 Side Rabbet Plane.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kunz","offers":[{"title":"Default Title","offer_id":50821637374234,"sku":"179809","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/kunz_logo_0ab15b1c-78de-4bb0-b9f0-a1380467d560.jpg?v=1751678281"},{"product_id":"lie-nielsenmediumshoulderplaneiron","title":"Lie-Nielsen Medium Shoulder Plane Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lie-Nielsen Medium Shoulder Plane Iron\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   3\/4\" wide replacement iron for\n   \u003ca data-prev-url=\"\/lie-nielsenmediumshoulderplane.aspx\" href=\"\/products\/lie-nielsenmediumshoulderplane\"\u003e\n    Lie-Nielsen Medium Shoulder Plane\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50821652513050,"sku":"134070","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134070d.jpg?v=1768340802"},{"product_id":"kunz-blade-for-78-rabbet-plane","title":"Kunz Blade for #78 Rabbet Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kunz Blade for #78 Rabbet Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Kunz Blade for #78 Rabbet Plane. The blade is 3\/32\" thick.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The narrow part of the blade is 29\/32″ wide.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The cutting width of the blade is 1-1\/2″.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The overall length of the blade is 4″\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The center slot in the blade is 1-1\/4″ long x 3\/8″ wide.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   There are a series of 6 notches on the back of the Kunz blade for fitting into the adjuster mechanism of the rabbet plane.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kunz","offers":[{"title":"Default Title","offer_id":50821826904346,"sku":"173912","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/kunz_logo_c7e7011e-15b6-40c2-8e83-3b126985931e.jpg?v=1751684091"},{"product_id":"hock-wooden-shoulder-plane-kit","title":"Hock Wooden Shoulder Plane Kit","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Hock Wooden Shoulder Plane Kit\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Our Shoulder Plane Kit by Hock Tools is precision-made from beech and bubinga (bubinga is now on the CITES \"threatened\" list so Hock is switching to Jatoba as the bubinga runs out) for beauty, performance and durability. This easy-to-assemble kit requires only a drill (for the locator dowels), some glue and clamps, and some fine tuning and shaping to complete. The bevel-down blade is bedded at 37.5° for Low Angle end-grain planing of shoulders. A hock high-carbon, 3\/16\" thick x 3\/4\" wide Tee Blade is included.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   A fun, simple and affordable way to add a shoulder plane to your tool kit.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Hock Tools","offers":[{"title":"Default Title","offer_id":50821839454490,"sku":"122559","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/122559.jpg?v=1751684431"},{"product_id":"stanley-duplex-78-rabbet-plane","title":"Stanley Duplex 78 Rabbet Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Stanley Duplex 78 Rabbet Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Stanley 12-978 Bullnose Rabbet Plane is 10\"(254mm) long and has a 1-1\/2\"(38mm) cutter width. One piece cast iron body and\n handle. All working surfaces are accurately machined for precise results. The plane has two cutter positions: the rear position for regular work and the\n forward position for bull-nose work. The rear cutter has precise depth adjustment. This plane is fitted with a spur for work across wood grain, a removable\n depth gauge, and adjustable fence that can be fitted on either side of the plane.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Stanley Tools","offers":[{"title":"Default Title","offer_id":50821952897306,"sku":"431153","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431153d.jpg?v=1768342272"},{"product_id":"lie-nielsensmallshoulderplaneiron","title":"Lie-Nielsen Small Shoulder Plane Iron","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Lie-Nielsen Small Shoulder Plane Iron\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   5\/8\" wide replacement iron for\n   \u003ca data-prev-url=\"\/lie-nielsensmallshoulderplane.aspx\" href=\"\/products\/lie-nielsensmallshoulderplane\"\u003e\n    Lie-Nielsen Small Shoulder Plane\n   \u003c\/a\u003e\n   (134110).\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Lie-Nielsen Toolworks","offers":[{"title":"Default Title","offer_id":50822012010778,"sku":"134133","price":79.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/134133d.jpg?v=1768342728"},{"product_id":"ece-hornbeam-rabbet-plane","title":"ECE Hornbeam Rabbet Plane with Adjustable Mouth","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    ECE Hornbeam Rabbet Plane with Adjustable Mouth\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   ECE hand planes combine Emmerich's meticulous quality with the economy of traditional hammer-set irons secured with wooden wedges.  Heavy irons are solidly bedded for smooth, clean performance. As in all Emmerich planes, the workmanship is simply outstanding.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This ECE gem is a fine value. The beech body is 270mm (10-5\/8\") long by 30mm (1-3\/16\")\n   \u003c!-- wide by 80mm (3-1\/8\u0026quot;) high--\u003e\n   .  The 30mm (1-3\/16\") iron includes a chipbreaker and is bedded at 50° for clean cutting with or across the grain. The mouth is adjustable for both heavy and light cuts.\n  \u003c\/p\u003e\n  \u003c!--mfg propagandawidth 30mmlength 270mmbed angle 50\u0026deg;--\u003e\n \n\u003c\/body\u003e","brand":"E. C. Emmerich Tools","offers":[{"title":"Default Title","offer_id":50822016631066,"sku":"124559","price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/124559-01d.jpg?v=1768342781"},{"product_id":"hock-34in-tee-shoulder-plane-blade-sh075","title":"Hock 3\/4 inch Tee Shoulder Plane Blade - SH075","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Hock 3\/4 inch Tee Shoulder Plane Blade - SH075\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement blade for the\n   \u003ca data-prev-url=\"\/hock-wooden-shoulder-plane-kit.aspx\" href=\"\/products\/hock-wooden-shoulder-plane-kit\"\u003e\n    Hock Shoulder Plane Kit\n   \u003c\/a\u003e\n   .\n This blade is made of high-carbon steel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Size: 3\/16\" thick x 3\/4\" wide.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Hock Tools","offers":[{"title":"Default Title","offer_id":50822041403674,"sku":"122571","price":31.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/122571.jpg?v=1751687752"},{"product_id":"clifton-770-bullnose-plane","title":"Clifton 770 Bullnose Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Clifton 770 Bull Nose Plane\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Clifton 770 Bull Nose plane is made to the exacting specifications as all the other Clifton planes,\n this will certainly be a great purchase for those who want a quality bullnose plane. The 770 fulfills the\n need for a straight-forward bull nose plane enabling the user to plane close to an abutting section of\n wood and avoiding tear-out. It is a light handy plane often used for cutting rebate stop shoulders. The\n body is machined from quality grey iron castings and is precision ground on the sole and sides. The lever\n arm is also made of grey iron. The cutting iron fits smoothly onto the machined pad in the body and can be\n finely adjusted by means of the screw. The finish is bright ground and all edges have been rounded over to\n fit comfortably in the hand.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Cutter width  - 1-1\/8\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Cutter steel - oil hardened tool steel, Rockwell C Hardness 59-61\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Bevel - Primary 25\u0026amp;deg, secondary 30°\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Plane length - 4\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight - .65kg (1.7lbs)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Made in Sheffield, England\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\n\nThe Clifton 770 Bull Nose plane is made to the exacting specifications as all the other Clifton planes, this\n will certainly be a great purchase for those who want a quality bullnose plane. The 770 fulfills the need\n for a straight-forward bull nose plane enabling the user to plane close to an abutting section of wood and\n avoiding tear-out. It is a light handy plane often used for cutting rebate stop shoulders. The body is\n machined from quality grey iron castings and is precision ground on the sole and sides. The lever arm is\n also made of grey iron. The cutting iron fits smoothly onto the machined pad in the body and can be finely\n adjusted by means of the screw. The finish is bright ground and all edges have been rounded over to fit\n comfortably in the hand.\n\nThis plane has a cutter width of 1 1\/8″ (29mm) and is made from high quality oil hardened tool steel, 59-61\n rockwell “C” hardness. The cutting edge is ground to 25 degrees primary and 30 degrees secondary.\n\nLength – 4″ (100mm)\nApprox. weight 1.7Ibs (.650kgs)\n\nMade in Sheffield\n--\u003e\n \n\u003c\/body\u003e","brand":"Thomas Flinn \u0026 Co.","offers":[{"title":"Default Title","offer_id":50822109462810,"sku":"171925","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/171925-01d.jpg?v=1768343563"},{"product_id":"veritas-small-shoulder-plane","title":"Veritas Small Shoulder Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Small Shoulder Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Designed for an easy grip and to sit nicely in your palm, the Veritas Small Shoulder Plane is easily controlled using one hand.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The lever cap wraps around the rear of the body, shrouding the blade adjustment mechanism so it does not obstruct the grip while acting as a comfortable rest for the palm. The through-hole and textured recesses cast into the side of the body provide grip points for fingers. The plane's adjustable toe lets you restrict the mouth for very fine shavings with minimum tear-out. Set screws along the side let you accurately position the blade so it requires no lateral adjustment when replacing the blade after sharpening.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The plane weighs 1 lb 2 oz and has a 6-1\/4\" long, 1\/2\" wide sole. The ductile cast iron body is accurately machined and ground so that the sole and sides are flat and square. The low bed angle of 15° combined with the 25° blade bevel results in a cutting angle of 40° for exceptional end-grain cutting. The lapped blade is 1\/8\" (0.125\") thick and 1\/2\" wide, and made of PM-V11 tool steel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    6-1\/4\" long  x 1\/2\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    15° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1\/2\" wide x 1\/8\" thick blade with 25° bevel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1lb 2oz\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822130401562,"sku":"478262","price":233.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478262-01d.jpg?v=1768343727"},{"product_id":"veritas-medium-shoulder-plane","title":"Veritas Medium Shoulder Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Medium Shoulder Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The shoulder plane is the ultimate tool for trimming a joint to a perfect fit. There is no better plane for trimming the shoulder of a tenon to perfection or for rebating work.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Veritas medium shoulder plane is proportioned for versatility; it measures 7\" long by 11\/16\" wide and weighs 2 lb. The ductile cast iron body is accurately machined and ground so that the sole and sides are flat and square.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   If you have ever used or even held a traditional shoulder plane, you will appreciate how this plane comes to hand. The unique lever cap with a pivoting knob lets you adjust the plane to fit your hand and preferred holding style. The concave knob rests in the web of your hand, giving you a secure grip without the need of a vise-like pressure.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The through-hole in the body adds to grip security but has to be experienced to be understood. The planes adjustable toe lets you narrow the mouth for very fine shavings with minimal tear-out. The low bed angle of 15° combined with the 25° blade bevel results in a cutting angle of 40° for exceptional end-grain cutting performance. Set screws along the side let you accurately position the blade and require no adjustment when replacing the blade after sharpening.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Blades are lapped, 1\/8\" (0.125\") thick, and come in PM-V11 tool steel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    7\" long  x 11\/16\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    15° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    11\/16\" wide x 1\/8\" thick blade with 25° bevel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n   \u003cli\u003e\n    2lb\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822130532634,"sku":"478256","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478256-01.jpg?v=1768343728"},{"product_id":"veritas-large-shoulder-plane","title":"Veritas Large Shoulder Plane","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Large Shoulder Plane\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This specialized rabbet plane is the largest in the Veritas line of shoulder planes. Its size and mass make it perfect for trimming breadboard tenons, adjusting shoulders, or even paring down tenon cheeks. At 8-1\/4\" long and 1-1\/4\" wide, and weighing 3-3\/4 lb, it brings both authority and precision to larger work.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Typical shoulder planes can be awkward to handle and control; Veritas has overcome this by shaping a new lever cap that fits properly in the palm, incorporating a hardwood lever cap knob that pivots 180°, and adding a multi-positional front knob that can be mounted on the top or on either side. You can also grip the plane in the recesses cast into the side. This combination of features ensures a solid, comfortable grip for all users in all applications. Blades are lapped, 1\/8\" (0.125\") thick, and come in PM-V11 tool steel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   For those who want the performance of a superior shoulder plane, this tool is the solution.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Made in Canada.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Ductile Cast Iron Body\n   \u003c\/li\u003e\n   \u003cli\u003e\n    8\" long  x 1-1\/4\" wide\n   \u003c\/li\u003e\n   \u003cli\u003e\n    15° bed angle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1-1\/4\" wide x 1\/8\" thick blade with 25° bevel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    PM-V11 blade\n   \u003c\/li\u003e\n   \u003cli\u003e\n    3-3\/4lb\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   PM-V11 Steel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All of the Veritas bench, block and shoulder planes that we stock have PM-V11 steel blades. Veritas conducted extensive testing and determined that PM-V11 offers the best balance of hardness, edge retention and ease of sharpening in tool steels. It hones to a very fine edge and can easily be sharpened with commonly available sharpening abrasives.\n  \u003c\/p\u003e\n  \u003cp style=\"font-weight:bold; font-style:italic;\"\u003e\n   From Veritas\n  \u003c\/p\u003e\n  \u003cblockquote cite=\"https:\/\/www.leevalley.com\/en-us\/discover\/woodworking\/2020\/september\/the-pm-v11-story\"\u003e\n   PM-V11 is a powdered metal (PM) alloy. To form a PM alloy, constituent metals are melted and mixed together, then atomized, creating very small particles that cool and harden, forming a powder. This powder is screened to ensure consistent particle size, and then heated under pressure to form a billet. The billet is then rolled to the required thickness, ready to process as a conventionally smelted steel would be. The PM process yields a steel with a very fine grain structure that is uniform throughout.\n  \u003c\/blockquote\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50822130762010,"sku":"478259","price":290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/478259-01d.jpg?v=1768343730"},{"product_id":"ecerabbetplanereplacementiron-1","title":"Replacement Iron for ECE 30mm Double Iron Wedge Rabbet Planes","description":"\u003cbody\u003e\n \n  \u003cdiv id=\"right\"\u003e\n   \u003cimg alt=\"ECE 1609 Fit\" data-prev-url=\"\/ProductImages\/handplanes\/ece\/124567-fit-200-184.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/ProductImages\/handplanes\/ece\/124567-fit-200-184.jpg\"\u003e\n   \u003cbr\u003e\n   \u003ca data-prev-url=\"\/ece-hornbeam-rabbet-plane.aspx\" href=\"\/products\/ece-hornbeam-rabbet-plane\"\u003e\n    Emmerich 10 S.30 Plane\n   \u003c\/a\u003e\n   \u003cbr\u003e\n   \u003cspan style=\"font-size:0.8em;\"\u003e\n    (10 SP is the same design with a lignum vitae sole)\n   \u003c\/span\u003e\n  \u003c\/div\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Replacement Iron for ECE 30mm Double Iron Wedge Rabbet Planes\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement iron for the E.C. Emmerich model 10 G,\n   \u003ca data-prev-url=\"\/ece-hornbeam-rabbet-plane.aspx\" href=\"\/products\/ece-hornbeam-rabbet-plane\"\u003e\n    10 S.30\n   \u003c\/a\u003e\n   and 10 SP rabbet planes.\n  \u003c\/p\u003e\n  \u003cp style=\"margin-bottom:120px;\"\u003e\n   All of these planes use 30mm wide double irons (cutting iron with cap iron - cap iron not included) that is held in place with a wedge.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"E. C. Emmerich Tools","offers":[{"title":"Default Title","offer_id":50822161498394,"sku":"124567","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/124567-01d.jpg?v=1768343950"}],"url":"https:\/\/www.highlandwoodworking.com\/collections\/rabbet-planes.oembed","provider":"Highland Woodworking","version":"1.0","type":"link"}