{"title":"Tormek Jigs and Accessories Sale","description":"\u003ch2\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/728x90_ad_10_of_JA_Sep_2025_a.png?v=1755720795\" alt=\"\"\u003e\u003c\/h2\u003e\n\u003cp\u003e(Does not include Sharpening Stations or Sharpening Machines.)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","products":[{"product_id":"tormek-stainless-steel-shaft-with-ezylock-for-t7","title":"Tormek Stainless Steel Shaft with EzyLock for T-7","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek Stainless Steel Shaft with EzyLock (for T-7 mfd. prior to 2009)\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation of the wheel to tighten the nut to the right torque.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Turn the Ezylock anticlockwise by hand and the grindstone will automatically tighten during the first sharpening.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   When dismounting, you turn the stone clockwise and the EzyLock will automatically become loose.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This construction also makes it very easy to change grindstones, from the standard aluminum oxide to the new specialty stones (Blackstone Silicon for High Speed Steel and the 4000 Grit Japanese Waterstone).\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The shaft, washer and EzyLock are all made of stainless steel. Fits Tormek T-7, Tormek 2000 and all older models with 250 mm (10\") stone. (NOTE: This feature now comes standard on all Tormek units (with 10\" stones) manufactured after 2009.)\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Includes stainless steel washer (1 pc), nut (1 pc) and nylon bearings (2 pcs).\n  \u003c\/p\u003e\n  \u003ccenter\u003e\n   \u003cimg data-prev-url=\"http:\/\/www.highlandwoodworking.com\/productimages\/tormek\/ezylock_mounting.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/tormek\/ezylock_mounting.jpg\"\u003e\n  \u003c\/center\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Mounting:\n   \u003c\/b\u003e\n   Put the grindstone onto the shaft and turn the EzyLock counter-clockwise by hand. When sharpening, the grindstone will automatically tighten to the right torque. You need no tools.\n   \u003cbr\u003e\n  \u003c\/p\u003e\n  \u003ccenter\u003e\n   \u003cimg data-prev-url=\"http:\/\/www.highlandwoodworking.com\/productimages\/tormek\/ezylock_dismounting.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/tormek\/ezylock_dismounting.jpg\"\u003e\n  \u003c\/center\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Dismounting:\n   \u003c\/b\u003e\n   Turn the grindstone clockwise by hand and the EzyLock washer nut will automatically become loose.\n   \u003cbr\u003e\n   \u003cbr\u003e\n   \u003cbr\u003e\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821514854682,"sku":"186128","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186128.jpg?v=1751675833"},{"product_id":"tormekstonegrader","title":"Tormek SP-650 Stone Grader","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Once a tool is ground to a satisfactory shape, or if it needs only touch-up sharpening\n to begin with, set the jigged tool aside and dress the grinding wheel with the fine side\n of Tormek's Stone Grader, a special two-sided dressing stone.  As you press the grader\n firmly against the rotating wheel through a few revolutions, it dresses the surface\n with 1000 grit abrasive, quickly turning the coarse grinding wheel into a fine sharpening wheel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   It's as effective as changing wheels entirely; but it's a better idea; you can go back to work\n at once, without altering the jig or tool rest settings at all. You'll sharpen at exactly the\n same angle at which you ground the tool, and it will take only fifteen to thirty seconds to\n work up to a sharp edge.  To grind your next tool, dress the stone briefly with the\n coarse side of the grader to return to 220-grit grinding action.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Stone Grader is included with all Tormek sharpening machines.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821514920218,"sku":"186314","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/sp650.jpg?v=1751675836"},{"product_id":"tormek-dbs-22-drill-bit-sharpening-jig","title":"Tormek DBS-22 Drill Bit Sharpening Jig","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   Tormek's Drill Bit Sharpening Jig works with all Tormek sharpener models. The jig sharpens twist bits from 1\/8\" (3mm) to 7\/8\" (22mm) in diameter. In addition to providing an accurate \u0026amp; heat-free grind, the DBS-22 jig will grind a 4-facet chisel edge onto the bit end. This creates a crisp point compared to a conventional cone point bit and keeps your drill bit from walking as you begin the hole, while taking less thrust force to drill the hole. As a result, less heat is generated prolonging the life of the bit. You can set any point angle for the bit between 90° \u0026amp; 150° and at four different clearance angles, giving you the flexibility to provide the best bit geometry for a given drilling task.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca name=\"moreinfo\"\u003e\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003ch3 style=\"background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   Find details on the Tormek Drill Bit Sharpening Jig in the\n   \u003ca data-prev-url=\"\/library\/Tormek-DBS-22-Brochure.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/Tormek-DBS-22-Brochure.pdf\" target=\"_blank\"\u003e\n    Tormek DBS-22 Drill Bit Sharpening Jig Brochure\n   \u003c\/a\u003e\n   . The brochure includes answers to the most common questions we get asked about the drill jig:\n  \u003c\/p\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    How does the Tormek Drill Bit Jig actually work?\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Why is Tormek's 4-facet point so beneficial?\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Why does a Tormek sharpened drill last longer?\n   \u003c\/li\u003e\n   \u003cli\u003e\n    How do you know if the steel has become overheated when using a dry grinder?\n   \u003c\/li\u003e\n   \u003cul\u003e\n    \u003cp\u003e\n    \u003c\/p\u003e\n   \u003c\/ul\u003e\n  \u003c\/ul\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821514985754,"sku":"186134","price":413.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186134d.jpg?v=1768340214"},{"product_id":"tormek-t-7-advanced-water-trough","title":"Tormek T-7 Advanced Water Trough","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek T-7 Advanced Water Trough\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Tormek's Advanced Water Trough AWT-250 has an enlarged standard lip which ensures that your workbench stays free from water.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The water trough incorporates a strong magnet, which attracts the steel particles ground from the tools being sharpened. This\n keeps your stone clean and cutting more freely. These small steel particles are otherwise pressed into the stone surface and can\n disturb the sharpening. When cleaning the water trough, youll find that most of the steel will be located right on the magnet.\n It can be wiped off the water trough with a paper towel or rag.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   For long tools that drip water over the edge of the lip (like chefs knives and planer blades), just add the water chute. It\n attaches easily and directs the water back into the trough.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Two Tilt Shoes are supplied with the AWT-250. You can use them to raise the honing wheel side of the machine so the water\n follows the tool towards the outside of the stone and runs back into the water trough. You minimize the water dripping onto\n the housing. This is an advantage especially when sharpening wide tools. When not required they can be stored magnetically\n under the machine.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Fits Tormek T-7, Tormek 2000 and all older models with 250 mm (10\") stone.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Advanced Water Trough is standard on Tormek T-7 sharpeners purchased after January 1, 2010.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Tormek # AWT-250\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821515051290,"sku":"186127","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186127.jpg?v=1751675841"},{"product_id":"tormekstroppingpaste","title":"Tormek PA-70 Stropping Paste","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek Stropping Paste\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Tormek provides a tube of toothpaste-like honing compound with the sharpener. Treat the leather wheel with a little mineral oil before applying the paste. One paste application lasts\n approximately 5-10 tools, depending on use. Reapply the oil and compound once the coating has worn away. To avoid rounding over a sharp edge, let the heel of the tool's bevel touch the\n leather wheel first, then lower the cutting edge until it just kisses the wheel.  Strop lightly for five or ten seconds, then strop the back of the tool just as carefully. Do not allow\n the honing compound to dry out, add a little more oil while stropping if needed. And now, handle that tool with care--that edge is\n   \u003ci\u003e\n    Tormek sharp\n   \u003c\/i\u003e\n   ! Included with Tormek  T-8 \u0026amp;\n T-4 Sharpening Systems. Approximately 3000 grit.\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\n\nThe honing compound contains a combination of micro abrasives and polishing components (average grain size 3 micron).\n\nOne application lasts for about 5–10 tools. Work the honing compound into the leather. The leather honing wheel will\n become saturated and more efficient the more you use it.\n\nWhen you have a new honing wheel, impregnate it first with a light machine oil so that it gets the right texture and\n can absorb the honing compound.\n\nIf you work in a dry climate, you might need to re-impregnate the honing wheel after some time with a few drops of oil\n before you apply fresh honing compound. Do not let the compound dry, apply more oil if necessary.\n\nGrit rating from 4\/29\/20 Tormek live video stream\n--\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821515116826,"sku":"186312","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186312d.jpg?v=1768340215"},{"product_id":"tormekmultitooljig","title":"Tormek SVS-50 Multi Tool Jig","description":"\u003cbody\u003e\n  \u003cp\u003e\n   The SVS-50 is used for sharpening spindle roughing gouges; beading \u0026amp; parting tools for woodturning; carving tools and skews (for turning or carving.) It adjusts for and skew angle and can sharpen a radiused skew. It can be set manually or using the\n   \u003ca data-prev-url=\"\/tormekturningtoolsettertts-100.aspx\" href=\"\/products\/tormekturningtoolsettertts-100\"\u003e\n    TTS-100 Turning Tool Setter\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821515182362,"sku":"186321","price":101.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/svs50_1d.jpg?v=1768340216"},{"product_id":"tormektoolrest","title":"Tormek SVD-110 Tool Rest","description":"\u003cbody\u003e\n  \u003cp\u003e\n   The Tormek Tool Rest is a basic platform tool jig that locks at any angle; it works well for scrapers, scrub plane irons, scorps, bark spuds, ice tools or anything else too uncommon to have a jig of its own.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821515247898,"sku":"186317","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/SVD110d.jpg?v=1768340217"},{"product_id":"diamond-tip-for-tormek-stone-truing-jigs","title":"Diamond Tip for Tormek Stone Truing Jigs","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Diamond Tip for Tormek Stone Truing Jigs\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement diamond tip for Tormek stone truing jigs.  Fits the current TT-50 truing jig and the older ADV-50D truing jig.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Tormek # ADV-D\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821515313434,"sku":"186126","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186126d.jpg?v=1768340218"},{"product_id":"tormekscissorjig","title":"Tormek SVX-150 Scissor Jig","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek SVX-150 Scissor Jig\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Tormek's Scissor Jig SVX-150 works like the knife jigs for precision sharpening of shears and scissors of all sizes. The jig also works well on portable electric hand planer blades. The scissor jig is compatible with the Tormek T-4, T-7 and T-8 models.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821515378970,"sku":"186322","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/svx150_1d.jpg?v=1768340218"},{"product_id":"tormekjointerandplanerbladejig","title":"Tormek SVH-320 Jointer \u0026 Planer Blade Jig","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Tormek's Jointer \u0026amp; Planer Blade Jig is the most expensive of Tormek's optional jigs and well worth the price. It is a fine jig which will save you time and money in the long-run.\n It comes with its own adjustable tool rest and 12\" knife holder. This Tormek jig handles any machine knife 5\/8\" or wider,\n in virtually any length; knives longer than the holder can be re-positioned to sharpen additional length at exactly the same\n setting as the first 12\".\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The SVH-320 can also sharpen\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/mitertrimmer.aspx\" href=\"\/products\/mitertrimmer\"\u003e\n    miter trimmer\n   \u003c\/a\u003e\n   blades.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821515444506,"sku":"186318","price":298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/SVH320d_4a30e6cd-f1cb-4e99-8c41-b7bd6153c746.jpg?v=1768340220"},{"product_id":"tormekreplacementstandardstropwheel","title":"Tormek Replacement Leather Strop Wheels","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek Replacement Leather Strop Wheels for T-3, T-4, T-7 and T-8\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement Standard Strop Wheel for Tormek Sharpeners. Select wheel model above.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"T-3 or T-4","offer_id":50821515510042,"sku":"186130","price":82.0,"currency_code":"USD","in_stock":true},{"title":"T-7 or T-8","offer_id":50821515542810,"sku":"186310","price":122.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/la220_1d.jpg?v=1768340221"},{"product_id":"tormekreplacement220gritgrindingwheel","title":"Tormek 10 inch Original Grindstone Wheel","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek 10 inch Original Grindstone Wheel\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Replacement 220 Grit Grinding Wheel for Tormek 10\" Sharpeners.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Tormek Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and\n a long life. This stone efficiently cuts all types of tools and steel qualities including HSS.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The unique composition of the stone, together with the Stone Grader SP-650 gives you two different cutting actions in one stone. The Stone\n grader polishes the surface of the grindstone from its normal 220 grit to a finish that works like a 1000 grit stone. This is a great\n advantage, since you can do the fine sharpening* with the same setting of the jig as used for the initial shaping* of the tool.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The outside of the stone has a depressed centre and a machined flat, smooth surface for flattening the back of plane irons and wood chisels.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Original Grindstone is the ideal choice when you want both efficient steel removal and fine finish in the same stone over a wide\n variety of materials, from carbon steel to high speed steel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   *A distinction should be made between the shaping and sharpening of a tool. When shaping you remove steel to achieve the shape and edge\n angle you want. When sharpening you just touch up an existing shape to renew the sharpness.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This stone fits all 10\" Tormek sharpeners including T-8, T-7, 2006, 2004 \u0026amp; 2000.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821515608346,"sku":"186313","price":305.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/SG250d.jpg?v=1768340222"},{"product_id":"tormekdustcover","title":"Tormek MH-380 Dust Cover","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek Dust Cover\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The dust cover protects your Tormek from shavings and wood dust when you're not using it. Fits all Tormek Sharpening machines.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821515673882,"sku":"186311","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/MH380d.jpg?v=1768340222"},{"product_id":"tormekproanglemaster","title":"Tormek WM-200 Pro Anglemaster","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Standard equipment with all Tormek Sharpening Systems. Tormek's Pro Anglemaster makes setting grinding angles a snap.\n It sets any angle from 15° to 75° and features built-in adjustment for different wheel diameters from 10\"\n down to 6\". Thus you can maintain accuracy on aging wheels, and use it on other grinders as well.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821515739418,"sku":"186324","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/wm200.jpg?v=1751675867"},{"product_id":"tormekhorizontaltoolrestbase","title":"Tormek XB-100 Horizontal Tool Rest Base","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek Horizontal Tool Rest Base\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Tormek's Horizontal Base lets you mount the rest at the rear of the machine for grinding away from the cutting edge, ideal\n for carving and turning tools.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The XB-100 is used to upgrade Tormek Sharpeners manufactured before August, 2003. All machines manufactured since then include this\n the horizontal base.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821515804954,"sku":"186325","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/xb100.jpg?v=1751675869"},{"product_id":"tormek-rb180-rotational-base","title":"Tormek RB-180 Rotating Base","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   Tormek's Rotating Base makes it easier to switch between sharpening and honing. It smoothly rotates 180 degrees and locks in place.\n The RB-180 Rotating Base fits the T-8, T-7, T-3, T-4, 2000 series, 1600 series and other older Tormek sharpening machines.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821515870490,"sku":"186138","price":83.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186138d.jpg?v=1768340224"},{"product_id":"tormek-10-4000-grit-japanese-waterstone-for-tormek-t7","title":"Tormek 10 inch 4000 Grit Japanese Waterstone Wheel","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek 10 inch 4000 Grit Japanese Waterstone Wheel\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Tormek Japanese Waterstone is 4000 grit and delivers a mirror finish with hardly any visible marks. Since it is made to create the finest\n surface, it has a limited steel removal capacity and cannot be used for shaping a tool.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   It excels at sharpening hand tools like carving tools, knives, scissors, plane irons and wood chisels where a minimum of steel removal is\n needed and a superior surface finish is demanded. Its unique composition gives the stone an extremely long life. Since the surface left by the\n Japanese Waterstone is so fine, we do not recommend honing afterwards on the leather honing wheel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   You should clean the stone surface of steel particles every minute or so with the fine side of the Stone Grader SP-650. Do not use the coarse\n side of the Stone Grader on the Japanese Waterstone.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This stone fits all 10\" Tormek sharpeners including T-8, T-7, 2006, 2004 \u0026amp; 2000.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821515936026,"sku":"186123","price":560.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186123d.jpg?v=1768340224"},{"product_id":"tormekturningtoolsettertts-100","title":"Tormek Turning Tool Setter TTS-100","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Tormek's tool setter works with their\n   \u003ca data-prev-url=\"\/tormek-gouge-jig-SVD-86.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/tormek-gouge-jig-SVD-86.aspx\"\u003e\n    SVD-186 Universal Gouge Jig\n   \u003c\/a\u003e\n   and their\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/tormekmultitooljig.aspx\" href=\"\/products\/tormekmultitooljig\"\u003e\n    SVS-50 Multi Tool Jig\n   \u003c\/a\u003e\n   so you can predictably\n and repeatably resharpen bowl gouges, spindle gouges, oval skews and flat skews.  Put the same fingernail grind on your\n bowl or detail gouge each time you sharpen, no matter the diameter of the stone.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Clear illustrations and built-in stops on the setter make it easy to adjust your tools in the Tormek jigs to your\n preferred edge shape.  It also works on the leather honing wheel.  Slide the setter over the tool rest and adjust the\n bar until both metal discs touch the surface.  Quite an ingenious device.  Detailed instructions included.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821644943642,"sku":"186107","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186107_1d.jpg?v=1768340778"},{"product_id":"tormekla120profilestrop","title":"Tormek LA-120 Profile Strop","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   The LA-120 is the perfect strop for finishing the inside surfaces of carving tools.  Its convex edge polishes the flutes of gouges from as large as you own down to 1\/4\" in diameter.  A sharp V edge polishes the inside of any 60° or 90° V or parting tool.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The optional\n   \u003ca data-prev-url=\"\/tormekprofilestropnarrowprofiles.aspx\" href=\"\/products\/tormekprofilestropnarrowprofiles\"\u003e\n    LA-124 narrow profiles\n   \u003c\/a\u003e\n   will hone gouges as small as 1\/8\" in diameter and 45° V or parting tools.  The\n   \u003ca data-prev-url=\"\/tormekprofilestropreplacementstandardprofiles.aspx\" href=\"\/products\/tormekprofilestropreplacementstandardprofiles\"\u003e\n    original profiles\n   \u003c\/a\u003e\n   can be replaced should they ever wear out. Use with\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/tormekstroppingpaste.aspx\" href=\"\/products\/tormekstroppingpaste\"\u003e\n    PA-70 stropping paste\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821647106330,"sku":"186101","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186101-01d.jpg?v=1768340791"},{"product_id":"tormekprofilestropreplacementstandardprofiles","title":"Tormek LA-122 Profile Strop Replacement Standard Profiles","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek Profile Strop Replacement Standard Profiles\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Standard 1\/4\" profiles for the\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/tormekla120profilestrop.aspx\" href=\"\/products\/tormekla120profilestrop\"\u003e\n    Tormek's LA-120 strop\n   \u003c\/a\u003e\n   .  Use with\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/tormekstroppingpaste.aspx\" href=\"\/products\/tormekstroppingpaste\"\u003e\n    PA-70 stropping paste\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821647204634,"sku":"186102","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186102d.jpg?v=1768340792"},{"product_id":"tormekprofilestropnarrowprofiles","title":"Tormek LA-124 Profile Strop Narrow Profiles","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek Profile Strop Narrow Profiles\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Tormek's optional narrow profile discs fit\n   \u003ca data-prev-url=\"\/tormekla120profilestrop.aspx\" href=\"\/products\/tormekla120profilestrop\"\u003e\n    Tormek's LA-120 strop\n   \u003c\/a\u003e\n   .  The round wheel will polish gouge flutes as small as 1\/8\" in diameter, and the V wheel will\npolish the inside of 45° V or parting tools.  Use with\n   \u003ca data-prev-url=\"\/tormekstroppingpaste.aspx\" href=\"\/products\/tormekstroppingpaste\"\u003e\n    PA-70 stropping paste\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821647302938,"sku":"186103","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186103d.jpg?v=1768340794"},{"product_id":"tormektruinganddressingtool","title":"Tormek TT-50 Truing \u0026 Dressing Tool","description":"\u003cbody\u003e\n  \u003cp\u003e\n   The\n   \u003cb\u003e\n    TT-50\n   \u003c\/b\u003e\n   uses the a diamond-impregnated tip to true the stone round and flat. Mounted onto the\n   \u003cb\u003e\n    Universal Support Bar\n   \u003c\/b\u003e\n   , the\n   \u003cb\u003e\n    TT-50\n   \u003c\/b\u003e\n   uses a\n lead screw to provide steady, even control as you draw the tip across the stone.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821658116378,"sku":"186112","price":133.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186112-01d.jpg?v=1768340821"},{"product_id":"tormekuniversalsupportbar","title":"Tormek US-105 Universal Support Bar","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek US-105 Universal Support Bar\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Upgrade your older (pre-2003) Tormek Supergrind 2000, T-7 \u0026amp; T-8 sharpener with the Universal Support Bar with micro adjust. Vertical or horizontal mount. End of bar has threaded hole for Tormek's safety stop.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The US-105 has been standard equipment on T-7 \u0026amp; T-8 sharpeners since 2003.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821661884698,"sku":"186323","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/us105_1d.jpg?v=1768340831"},{"product_id":"tormekhandbook","title":"Tormek HB-10 Handbook","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek Handbook\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  This 149 page manual details every operation of the Tormek.  It is included with the Tormek Supergrind 2006 and the Tormek T 7 Sharpeners, so you shouldn't need it unless you bought your machine several years ago.\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821736268058,"sku":"186309","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/hb10_1d.jpg?v=1768340943"},{"product_id":"tormektnt-708woodturnerskit","title":"Tormek TNT-808 Woodturner's Kit","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek TNT-808 Woodturner's Kit\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Tormek Woodturner's Kit TNT-808 includes the accessories you need to shape and sharpen all your turning tools. The jigs come packed in an\n   \u003ca data-prev-url=\"\/tormek-storage-tray.aspx\" href=\"\/products\/tormek-storage-tray\"\u003e\n    TNT-00 Storage Tray\n   \u003c\/a\u003e\n   . This sturdy foam organizer comes in\n   \u003ca data-prev-url=\"\/tormek-case.aspx\" href=\"\/products\/tormek-case\"\u003e\n    TC-800\n   \u003c\/a\u003e\n   Case\n and is also designed to fit in the drawers of the\n   \u003ca data-prev-url=\"\/tormek-ts-740-sharpening-station.aspx\" href=\"\/products\/tormek-ts-740-sharpening-station\"\u003e\n    Tormek TS-740 Sharpening Station.\n   \u003c\/a\u003e\n   \u003c!--The jigs come packed in a convenient sturdy foam organizer sized to fit in the drawers of the\n \u003ca href=\"http:\/\/www.highlandwoodworking.com\/tormek-ts-740-sharpening-station.aspx\"\u003eTormek TS-740 Sharpening Station.\u003c\/a\u003e--\u003e\n  \u003c\/p\u003e\n  \u003ch3\u003e\n   Tormek Woodturner's Kit Includes:\n  \u003c\/h3\u003e\n  \u003cdiv style=\"width:660px; height:900px;\"\u003e\n   \u003c!--update for change to TNT-808. Change main images. change item number. change mfg#. SVD-186R. Change image to \u003cimg src=\"\/productimages\/tormek\/jigs\/svd186r-150-113.png\" alt=\"SVD-186R\". Add copy re: knives???--\u003e\n   \u003cdiv class=\"tormek_jig\"\u003e\n    \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/tormek-gouge-jig.aspx\" href=\"\/products\/tormek-gouge-jig\"\u003e\n     \u003cimg alt=\"SVD-186R\" class=\"tormek_left\" data-prev-url=\"\/productimages\/tormek\/jigs\/svd186r-150-113.png\" height=\"113\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/tormek\/jigs\/svd186r-150-113.png\" width=\"150\"\u003e\n    \u003c\/a\u003e\n    \u003cdiv class=\"tormek_right\"\u003e\n     \u003ch5\u003e\n      Gouge Jig\n     \u003c\/h5\u003e\n     \u003c!--Leave this hidden when un-hiding remainder of this listing!!!!!  \u003cp\u003eFor fingernail shaped bowl gouges and spindle gouges. Can be set to create the edge geometry of your choice. Also for  exchangeable cutters of any shape.\u003c\/p\u003e--\u003e\n     \u003cp\u003e\n      Used to sharpen your woodturning gouges to a razor sharp edge with full control. You get an exact replication of both the shape and edge angle. You can also use it for woodcarving tools, such as curved gouges and V-tools. Used correctly, there is no alternative method that can give you faster or sharper results.\n     \u003c\/p\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n   \u003cdiv class=\"tormek_jig\"\u003e\n    \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/tormekmultitooljig.aspx\" href=\"\/products\/tormekmultitooljig\"\u003e\n     \u003cimg alt=\"SVS-50\" class=\"tormek_left\" data-prev-url=\"\/productimages\/tormek\/svs50-150-113.jpg\" height=\"113\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/tormek\/svs50-150-113.jpg\" width=\"150\"\u003e\n    \u003c\/a\u003e\n    \u003cdiv class=\"tormek_right\"\u003e\n     \u003ch5\u003e\n      Multi Tool Jig\n     \u003c\/h5\u003e\n     \u003cp\u003e\n      The SVS-50 is used for sharpening spindle roughing gouges; beading \u0026amp; parting tools for woodturning; carving tools and skews (for turning or carving.) It adjusts for and skew angle and can sharpen a radiused skew.\n     \u003c\/p\u003e\n     \u003c!--\u003cp\u003eFor skew chisel with a straight or a curved edge. Can be set for any skew angle. Even for skews with oval section. Also for parting and beading tools and roughing gouges.\u003c\/p\u003e--\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n   \u003cdiv class=\"tormek_jig\"\u003e\n    \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/tormekturningtoolsettertts-100.aspx\" href=\"\/products\/tormekturningtoolsettertts-100\"\u003e\n     \u003cimg alt=\"TTS-100\" class=\"tormek_left\" data-prev-url=\"\/productimages\/tormek\/tts100-150-113.jpg\" height=\"113\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/tormek\/tts100-150-113.jpg\" width=\"150\"\u003e\n    \u003c\/a\u003e\n    \u003cdiv class=\"tormek_right\"\u003e\n     \u003ch5\u003e\n      Turning Tool Setter\n     \u003c\/h5\u003e\n     \u003c!--\u003cp\u003eFor instant setting of the geometries on gouges and skews when using the SVD-186 and the SVS-50 jigs. With built in edge geometries. Works on any stone diameter.\u003c\/p\u003e--\u003e\n     \u003cp\u003e\n      Tormek's tool setter works with their SVD-186 Universal Gouge Jig and their SVS-50 Multi Tool Jig so you can predictably and repeatably resharpen bowl gouges, spindle gouges, oval skews and flat skews. Put the same fingernail grind on your bowl or detail gouge each time you sharpen, no matter the diameter of the stone.\n     \u003c\/p\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n   \u003cdiv class=\"tormek_jig\"\u003e\n    \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/tormektoolrest.aspx\" href=\"\/products\/tormektoolrest\"\u003e\n     \u003cimg alt=\"SVD-110\" class=\"tormek_left\" data-prev-url=\"\/productimages\/tormek\/svd110-150-113.jpg\" height=\"113\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/tormek\/svd110-150-113.jpg\" width=\"150\"\u003e\n    \u003c\/a\u003e\n    \u003cdiv class=\"tormek_right\"\u003e\n     \u003ch5\u003e\n      Tool Rest\n     \u003c\/h5\u003e\n     \u003c!--\u003cp\u003eFor scrapers, hollowing tools and thin parting tools. Secure locking on the Universal Support thanks to the patented design.\u003c\/p\u003e--\u003e\n     \u003cp\u003e\n      The Tormek Tool Rest is a basic platform that locks at any angle; it works well for scrapers, hollowing tools, bark spuds, ice tools or anything else too uncommon to have a jig of its own.\n     \u003c\/p\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n   \u003cdiv class=\"tormek_jig\"\u003e\n    \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/tormekla120profilestrop.aspx\" href=\"\/products\/tormekla120profilestrop\"\u003e\n     \u003cimg alt=\"LA-120\" class=\"tormek_left\" data-prev-url=\"\/productimages\/tormek\/la120-150-113.jpg\" height=\"113\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/tormek\/la120-150-113.jpg\" width=\"150\"\u003e\n    \u003c\/a\u003e\n    \u003cdiv class=\"tormek_right\"\u003e\n     \u003ch5\u003e\n      Profiled Leather Honing Wheel\n     \u003c\/h5\u003e\n     \u003cp\u003e\n      For honing and polishing the flute on gouges. With two exchangeable profiles. One with a 3 mm (1\/8\") radius and one with a 60° point.\n     \u003c\/p\u003e\n     \u003c!--\u003cp\u003eThe LA-120 is perfect for finishing the inside surfaces of carving tools.  Its convex edge polishes the flutes of gouges from as large as you own down to 1\/4\u0026quot; in diameter.  A sharp V edge polishes the inside of any 60\u0026#176; or 90\u0026#176; V or parting tool.\u003c\/p\u003e--\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n   \u003cdiv class=\"tormek_jig\"\u003e\n    \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/tormekdustcover.aspx\" href=\"\/products\/tormekdustcover\"\u003e\n     \u003cimg alt=\"MH-380\" class=\"tormek_left\" data-prev-url=\"\/productimages\/tormek\/mh380-150-113.jpg\" height=\"113\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/tormek\/mh380-150-113.jpg\" width=\"150\"\u003e\n    \u003c\/a\u003e\n    \u003cdiv class=\"tormek_right\"\u003e\n     \u003ch5\u003e\n      Machine cover\n     \u003c\/h5\u003e\n     \u003c!--\u003cp\u003eFor protecting the machine from shavings and wood dust.\u003c\/p\u003e--\u003e\n     \u003cp\u003e\n      The dust cover protects your Tormek from shavings and wood dust when you're not using it. Fits all Tormek Sharpening machines.\n     \u003c\/p\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n   \u003cdiv class=\"tormek_jig\"\u003e\n    \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/tormektnt-300woodturnersinstructionbox.aspx\" href=\"\/products\/tormektnt-300woodturnersinstructionbox\"\u003e\n     \u003cimg alt=\"TNT-300\" class=\"tormek_left\" data-prev-url=\"\/productimages\/tormek\/tnt300-150-113.jpg\" height=\"113\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/tormek\/tnt300-150-113.jpg\" width=\"150\"\u003e\n    \u003c\/a\u003e\n    \u003cdiv class=\"tormek_right\"\u003e\n     \u003ch5\u003e\n      Woodturners Instruction Box\n     \u003c\/h5\u003e\n     \u003c!--\u003cp\u003eAn 1 hour and 20 minutes comprehensive DVD made by Jeff Farris and a detailed handbook by Torgny Jansson shows how to best work with the Tormek TNT sharpening system.\u003c\/p\u003e--\u003e\n     \u003cp\u003e\n      Learn how to sharpen woodturning tools the Tormek way. The Tormek Instruction box contains an 80 minute DVD video featuring Jeff Farris, a highly-experienced American woodturning instructor plus a handbook written by Torgny Jansson, the inventor of the Tormek Sharpening System. Shape and sharpen all your turning tools with a Tormek.\n     \u003c\/p\u003e\n    \u003c\/div\u003e\n   \u003c\/div\u003e\n  \u003c\/div\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821752488218,"sku":"186193","price":526.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186193-01d.jpg?v=1768340972"},{"product_id":"tormektnt-300woodturnersinstructionbox","title":"Tormek TNT-300 Woodturner's Instruction Box","description":"\u003cp\u003eLearn how to sharpen woodturning tools the Tormek way. The Tormek Instruction box contains an 80 minute DVD video featuring Jeff Farris, a highly-experienced American woodturning instructor plus a handbook written by Torgny Jansson, the inventor of the Tormek Sharpening System. Shape and sharpen all your turning tools with a Tormek.\u003c\/p\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821752586522,"sku":"186117","price":49.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186117d.jpg?v=1768340972"},{"product_id":"tormekblackstonesiliconwheel10220x","title":"Tormek 10 inch Blackstone Silicon Wheel","description":"\u003cbody\u003e\n  \u003cp\u003e\n   The Blackstone Silicon wheel is used for shaping and sharpening high speed steel (HSS) and other exotic alloyed steels. It can also\n touch up tungsten carbide. It does not offer faster steel removal on ordinary carbon steel than the Tormek Original Grindstone.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   You can use the SP650 Tormek Stone grader to alter the 220 grit of the Blackstone Silicon wheel to 1000 grit, just\n like you do with Tormek's original grindstone.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This stone fits all 10\" Tormek sharpeners including T-8, T-7, 2006, 2004 \u0026amp; 2000.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821770182938,"sku":"186122","price":345.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186122d.jpg?v=1768341051"},{"product_id":"tormekbenchgrindmountbgm100","title":"Tormek Bench Grinding Mounting Set - BGM-100","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek Bench Grinding Mounting Set - BGM-100\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Tormek's BGM-100 Bench Grinder Mount allows users to apply any of several Tormek jigs to a\n dry grinding wheel, including the\n   \u003ca data-prev-url=\"\/tormek-gouge-jig-SVD-86.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/tormek-gouge-jig-SVD-86.aspx\"\u003e\n    SVD-186 Universal Gouge Jig\n   \u003c\/a\u003e\n   ,\n   \u003ca data-prev-url=\"\/tormekmultitooljig.aspx\" href=\"\/products\/tormekmultitooljig\"\u003e\n    SVS-50 Multi-Jig\n   \u003c\/a\u003e\n   (for skews and traditional grinds on gouges), the\n   \u003ca data-prev-url=\"\/tormektoolrest.aspx\" href=\"\/products\/tormektoolrest\"\u003e\n    SVD-110 Tool Rest\n   \u003c\/a\u003e\n   (for scrapers)and is also\n compatible with the\n   \u003ca data-prev-url=\"\/tormekturningtoolsettertts-100.aspx\" href=\"\/products\/tormekturningtoolsettertts-100\"\u003e\n    TTS-100 Turning Tool Setter\n   \u003c\/a\u003e\n   and the\n   \u003ca data-prev-url=\"\/tormektnt-300woodturnersinstructionbox.aspx\" href=\"\/products\/tormektnt-300woodturnersinstructionbox\"\u003e\n    TNT-300 Woodturner's Instruction Box\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Now owners of traditional dry bench grinders can achieve the accuracy of a Tormek machine while shaping profiles on turning gouges,\n skews and scrapers as well as many carving tools.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Bench Grinding Mounting Set includes: One universal support bar, one horizontal base, one height-adjustable block, hardware, four rubber feet, and one set of profile labels.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821794234650,"sku":"186124","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186124-1d.jpg?v=1768341239"},{"product_id":"tormek-8-4000-grit-japanese-waterstone-for-tormek-t3","title":"Tormek 8 inch 4000 Grit Japanese Waterstone Wheel","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek 8 inch 4000 Grit Japanese Waterstone Wheel\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Tormek Japanese Waterstone is 4000 grit and delivers a mirror finish with hardly any visible marks. Since it is made to create the finest\n surface, it has a limited steel removal capacity and cannot be used for shaping* a tool.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   It excels at sharpening hand tools like carving tools, knives, scissors, plane irons and wood chisels where a minimum of steel removal is\n needed and a superior surface finish is demanded. Its unique composition gives the stone an extremely long life. Since the surface left by the\n Japanese Waterstone is so fine, we do not recommend honing afterwards on the leather honing wheel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   You should clean the stone surface of steel particles every minute or so with the fine side of the Stone Grader SP-650. Do not use the coarse\n side of the Stone Grader on the Japanese Waterstone.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This stone fits all 8\" Tormek sharpeners including T-4, T-3, 1206 \u0026amp; 1200.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821803278618,"sku":"186108","price":357.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186108.jpg?v=1751683669"},{"product_id":"tormek-stainless-steel-shaft-with-ezylock-for-t3","title":"Tormek Stainless Steel Shaft with EzyLock for T-3","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek Stainless Steel Shaft with EzyLock for T-3\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   With the Tormek EzyLock, which is both a nut and a washer, you need no tools for mounting and dismounting the stone. The special pitch on the left hand thread causes the rotation of the wheel to tighten the nut to the right torque.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Turn the Ezylock anticlockwise by hand and the grindstone will automatically tighten during the first sharpening.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   When dismounting, you turn the stone clockwise and the EzyLock will automatically become loose.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This construction also makes it very easy to change grindstones, from the standard aluminum oxide to the new specialty stones (Blackstone Silicon for High Speed Steel and the 4000 Grit Japanese Waterstone).\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The shaft, washer and EzyLock are all made of stainless steel. Fits Tormek T-3, Tormek 1206 and all older models with 200 mm (8\") stone.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Including stainless steel washer (1 pc), nut (1 pc) and nylon bearings (2 pcs). For Tormek models T-3 and 1206.\n   \u003cbr\u003e\n   \u003cbr\u003e\n  \u003c\/p\u003e\n  \u003ccenter\u003e\n   \u003cimg data-prev-url=\"http:\/\/www.highlandwoodworking.com\/productimages\/tormek\/ezylock_mounting.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/tormek\/ezylock_mounting.jpg\"\u003e\n  \u003c\/center\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Mounting:\n   \u003c\/b\u003e\n   Put the grindstone onto the shaft and turn the EzyLock counter-clockwise by hand. When sharpening, the grindstone will automatically tighten to the right torque. You need no tools.\n   \u003cbr\u003e\n  \u003c\/p\u003e\n  \u003ccenter\u003e\n   \u003cimg data-prev-url=\"http:\/\/www.highlandwoodworking.com\/productimages\/tormek\/ezylock_dismounting.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/tormek\/ezylock_dismounting.jpg\"\u003e\n  \u003c\/center\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Dismounting:\n   \u003c\/b\u003e\n   Turn the grindstone clockwise by hand and the EzyLock washer nut will automatically become loose.\n   \u003cbr\u003e\n   \u003cbr\u003e\n   \u003cbr\u003e\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821803344154,"sku":"186129","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186128d.jpg?v=1768341350"},{"product_id":"tormek-svm-00-small-knife-holder","title":"Tormek SVM-00 Small Knife Holder","description":"\u003cbody\u003e\n  \u003cp\u003e\n   The Tormek SVM-00 Small Knife Holder is an extension of the\n   \u003ca data-prev-url=\"\/tormek-kj-45-centering-knife-jig.aspx\" href=\"\/products\/tormek-kj-45-centering-knife-jig\"\u003e\n    KJ-45 Small Knife Jig\n   \u003c\/a\u003e\n   (not included) that holds knives that are too small to fit in any other Tormek sharpening jigs.\n It is great for small pocket knives, chip carving knives and small whittling knives. It also works with the older SVM-45 Small Knife Jig.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Simply grip the handle of your knife in the SVM-00, then mount the SVM-00 in the KJ-45 with the knife edge parallel to the edge of the KJ-45.\n Once mounted, sharpen the knife the same way you would any knife with the KJ-45.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The SVM-00 Small Knife Holder\n   \u003cb\u003e\n    REQUIRES\n   \u003c\/b\u003e\n   the KJ-45 Small Knife Jig (not included) and will not work without it. Does not work with the SVM-100, SVM-145 or KJ-145 Large Knife Jigs.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821861835034,"sku":"186148","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186148d.jpg?v=1768341764"},{"product_id":"tormek-gouge-jig","title":"Tormek SVD-186R Gouge Jig","description":"\u003ch5\u003eTurning Tools\u003c\/h5\u003e\n\u003cp\u003eSharp turning tools are the best turning tools. With Tormek's gouge jig, you can sharpen your turning gouges to a razor edge with complete control. It also includes a special shaft that will hold replaceable HSS turning tool tips for sharpening.\u003c\/p\u003e\n\u003cp\u003eIn combination with the \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/tormekturningtoolsettertts-100.aspx\" href=\"\/products\/tormekturningtoolsettertts-100\"\u003e Turning Tool Setter \u003c\/a\u003e , the SVD-186R can exactly replicate the shape of your cutting edge throughout the life of the tool. If you want to re-shape a tool, you can use the SVD-186R with the Tormek \u003ca data-prev-url=\"\/tormekbenchgrindmountbgm100.aspx\" href=\"\/products\/tormekbenchgrindmountbgm100\"\u003e BGM-100 Grinder Mount \u003c\/a\u003e to quickly re-grind the edge on your bench grinder, then move back to you Tormek for final honing - without changing the settings on the jig.\u003c\/p\u003e\n\u003ch5\u003eCarving Tools\u003c\/h5\u003e\n\u003cp\u003eThe gouge jig excels at sharpening carving gouges of many shapes and profiles, including V-Tools. It will hold tools up to 36mm (~1-7\/16\") wide.\u003c\/p\u003e\n\u003ch5\u003eFlat Bevel Knives\u003c\/h5\u003e\n\u003cp\u003eSharpening Knives with a flat bevel (marking knives, chip carving knives, violin knives, etc.) can be challenging. The SVD-186R holds these knives in perfect position to sharpen them on the flat side of the Tormek wheel. (Only do this on \u003ca data-prev-url=\"\/tormek-diamond-wheel.aspx\" href=\"\/products\/tormek-diamond-wheel\"\u003e Diamond wheels \u003c\/a\u003e . You should not grind on the side of a standard Tormek grindstone.)\u003c\/p\u003e\n\u003cdiv id=\"right\"\u003e\n\u003cimg alt=\"Rotational Locking Screw\" data-prev-url=\"\/productimages\/tormek\/jigs\/186340-13t.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/tormek\/jigs\/186340-13t.jpg\" style=\"width: 133px; height: 100px;\"\u003e \u003cbr\u003eRotational Locking Screw\u003c\/div\u003e\n\u003ch5\u003eRotation Control\u003c\/h5\u003e\n\u003cp\u003eThe \u003cstrong\u003e SVD-186R \u003c\/strong\u003e has a screw to lock the jig's rotation movement. This makes it easier to maintain full control when sharpening carving tools, especially V-Tools. It also makes it easier to sharpen a flat bevel on chip carving knives, violin knives and marking knives.\u003c\/p\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821934842138,"sku":"186340","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186340-01d.jpg?v=1768342190"},{"product_id":"tormek-square-edge-jig","title":"Tormek SE-77 Square Edge Jig","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Tormek's SE-77 Square Edge Jig is the jig for holding your chisels and\nplane irons on Tormek sharpeners, and comes as standard equipment with the Tormek\nmodel T-8 sharpener.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The SE-77 has greater mass for improved stability, along with improved functionality that\nmakes it easier to clamp your chisel and plane irons evenly, securely and squarely to\nensure you get flawless 90 degree edges. The new jig's design also has an adjustment\nfeature that allows you to precisely sharpen a camber onto your plane irons for situations\nwhere that may be beneficial.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The SE-77 Square Edge Jig works on all previous models of Tormek sharpeners.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821953913114,"sku":"186175","price":104.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186175d.jpg?v=1768342282"},{"product_id":"tormek-svs38-short-tool-jig","title":"Tormek SVS-38 Short Tool Jig","description":"\u003cbody\u003e\n  \u003cp\u003e\n   The Tormek Short Tool Jig is used to sharpen short chisels and carving tools, especially bits for reciprocating power carvers. The tool\n clamps into the jig using the knob on top and the jig centers on the universal support bar so you can rotate the tools against the\n stone smoothly. It can handle tools as wide as 38mm (1-1\/2\")and as short as 1-3\/4\".\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The SVS-38 is functionally the same as it's predecessor, the SVS-32.  However, it accepts tools\n up to 38mm (1-1\/2\") wide.\n  \u003c\/p\u003e\n  \u003ch3 style=\"background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/tormek\/tormek-svs38-manual.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/tormek\/tormek-svs38-manual.pdf\"\u003e\n    Tormek SVS-38 \u0026amp; SVS-32 Short Tool Jig Instructions\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821955059994,"sku":"186176","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186176d.jpg?v=1768342286"},{"product_id":"tormek-profile-knife-jig","title":"Tormek SVP-80 Profile Knife Jig","description":"\u003cbody\u003e\n  \u003cp\u003e\n   The Tormek SVP-80 Profile Knife Jig sharpens all makes and shapes of moulding knifes with 24, 30 or 36 mm distance between\n the hole-centers. (Primarily European molding machines.) It can handle knives up to 100 mm (4\") wide. Since you sharpen the flat back surface of the knife, you can use the jig regardless of the profile.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The SVP-80 works on all Tormek T-8, T-7, T-4, T-3 \u0026amp; SuperGrind sharpeners.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821955846426,"sku":"186320","price":258.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/svp80-d.jpg?v=1768342290"},{"product_id":"tormek-owc1-converter","title":"Tormek OWC-1 Converter for Wolverine","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek OWC-1 Converter for Wolverine\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The OWC-1 Converter is used with the\n   \u003ca data-prev-url=\"\/tormekbenchgrindmountbgm100.aspx\" href=\"\/products\/tormekbenchgrindmountbgm100\"\u003e\n    Tormek BGM-100 Bench Grinder Mount\n   \u003c\/a\u003e\n   when using Tormek jigs on your bench grinder.\n If you already use a\n   \u003ca data-prev-url=\"\/onewaywolverinegrindingjig.aspx\" href=\"\/products\/onewaywolverinegrindingjig\"\u003e\n    Oneway Wolverine Jig\n   \u003c\/a\u003e\n   with your bench grinder, the Converter adapts the BGM-100 so that the\n   \u003ca data-prev-url=\"\/tormekuniversalsupportbar.aspx\" href=\"\/products\/tormekuniversalsupportbar\"\u003e\n    Tormek Universal Support Bar\n   \u003c\/a\u003e\n   attaches directly to the Wolverine Vee Arm\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821961089306,"sku":"186186","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186186d.jpg?v=1768342311"},{"product_id":"tormek-rubber-mat","title":"Tormek RM-533 Rubber Work Mat","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek RM-533 Rubber Work Mat\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Rubber Work Mat provides a non-slip, waterproof surface for you Tormek sharpening machine. It is 21\" x 13-1\/2\"\n (533mm x 343mm) and has a raised rim to contain any water. One RM-533 Rubber Mat is included with the\n   \u003ca data-prev-url=\"\/tormek-ts-740-sharpening-station.aspx\" href=\"\/products\/tormek-ts-740-sharpening-station\"\u003e\n    Tormek Sharpening Station\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003c!--\nRubber Work Mat\nWith the Tormek Rubber Work Mat you get a water proof yet non slip surface. The raised rim will retain any water spillage.\n 533×343 mm (21\"×13½\")\n--\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821976654106,"sku":"186161","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186161.jpg?v=1751686454"},{"product_id":"tormek-diamond-wheel","title":"Tormek Diamond Wheel","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Tormek's Diamond Wheels are designed for use on Tormek's Water Cooled Sharpening Systems. Like the Original Grindstone wheel\n for the Tormek machines, these diamond wheels will stay perfectly cool during your grinding \u0026amp; honing operations due to the low rpm\n machine speed and immersive water bath.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The benefits diamond wheels give users is that they are exceptionally durable and will always retain their full size diameter. This proves\n useful when regularly sharpening the same tool as it simplifies both the set up and the sharpening process.  The constant wheel diameter also\n optimizes using the side of the wheel for some grinding operations.  This side sharpening results in a completely flat surface grind on the\n tool's edge, compared to the slight hollow grind from the wheel's circumference.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   We recommend the\n   \u003ca data-prev-url=\"\/tormek-mb100-multi-base.aspx\" href=\"\/products\/tormek-mb100-multi-base\"\u003e\n    Tormek MB-100 Multi-Base\n   \u003c\/a\u003e\n   for side grinding on the Diamond Wheels. It allows\n the individual Tormek tool jigs to be fully supported and in control when grinding on the wheel's side.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Size \u0026amp; Grit\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   Tormek Diamond Wheels come in three grits.\n  \u003c\/p\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Coarse (360 grit for fast grinding and shaping)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Fine (600 grit for general sharpening of steel carbide \u0026amp; ceramic)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Extra Fine (1200 grit for extra fine sharpening, especially kitchen knives and carving tools)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Diamond wheels come in two sizes to fit all Tormek machines.\n  \u003c\/p\u003e\n  \u003cul style=\"margin-top:-2px;margin-bottom:15px;\"\u003e\n   \u003cli\u003e\n    250mm (10\") wheels fit Tormek sharpener models T-8, T-7, 2006, 2004 \u0026amp; 2000.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    200mm (8\") wheels fit Tormek sharpener models T-4 \u0026amp; T-3.\n    \u003cspan style=\"font-weight:bold; font-style:italic;\"\u003e\n    \u003c\/span\u003e\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"10 inch Coarse - 360 Grit","offer_id":50821999198490,"sku":"186188","price":480.0,"currency_code":"USD","in_stock":true},{"title":"10 inch Fine - 600 Grit","offer_id":50821999231258,"sku":"186189","price":462.0,"currency_code":"USD","in_stock":true},{"title":"10 inch Extra Fine - 1200 Grit","offer_id":50821999264026,"sku":"186190","price":462.0,"currency_code":"USD","in_stock":true},{"title":"8 inch Coarse - 360 Grit","offer_id":50821999296794,"sku":"186349","price":363.0,"currency_code":"USD","in_stock":true},{"title":"8 inch Fine - 600 Grit","offer_id":50821999329562,"sku":"186350","price":337.0,"currency_code":"USD","in_stock":true},{"title":"8 inch Extra Fine - 1200 Grit","offer_id":50821999362330,"sku":"186351","price":337.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/tormek-diamond-wheels-d.jpg?v=1768342615"},{"product_id":"tormek-acc-150-anti-corrosion-concentrate","title":"Tormek Anti-Corrosion Concentrate - Pack of 2","description":"\u003cbody\u003e\n  \u003cp\u003e\n   For use with Diamond Wheels on Tormek 10\" sharpening machines. Mix with water at a ~4% solution before adding the water to the trough.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Includes two 150mL (~5oz) bottles.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50821999460634,"sku":"186192","price":63.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186192-02d.jpg?v=1768342616"},{"product_id":"tormekuniversalsupportbarextended","title":"Tormek US-430 Universal Support Extended","description":"\u003cbody\u003e\n  \u003cp\u003e\n   The US-430 Universal Support Bar gives you additional reach so you can sharpen larger blades like cleavers, machetes and long knives.\n Like the standard\n   \u003ca data-prev-url=\"\/tormekuniversalsupportbar.aspx\" href=\"\/products\/tormekuniversalsupportbar\"\u003e\n    US-105\n   \u003c\/a\u003e\n   , this support includes a micro-adjust scale \u0026amp; nut. It is\n 436mm (17-3\/16\") long - that's 100mm (4\") longer than the US-105. The support bar length includes ~50mm (2\")\n  on the short side so you can use the honing wheel without repositioning in some cases. The legs are 200mm (8\") long - that's\n 55mm (2-3\/16\") longer than the US-105.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The US-430 can be mounted in three positions on your Tormek machine.\n  \u003c\/p\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Veritcally for sharpening into the edge\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Horizontally for sharpening away with the edge\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Horizontally on the honing wheel side (for honing)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   Machine Fit\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The US-430 is compatible with Tormek\n   \u003ca data-prev-url=\"\/tormek-t8-sharpening-system.aspx\" href=\"\/products\/tormek-t8-sharpening-system\"\u003e\n    T-8\n   \u003c\/a\u003e\n   , T-7,\n   \u003ca data-prev-url=\"\/tormekt-4sharpeningsystem.aspx\" href=\"\/products\/tormekt-4sharpeningsystem\"\u003e\n    T-4\n   \u003c\/a\u003e\n   , T-3 and older machines (model 2000, etc.).\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50822023020826,"sku":"186339","price":133.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186339d.jpg?v=1768342839"},{"product_id":"tormek-storage-tray","title":"Tormek Jig Storage Tray","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek Jig Storage Tray\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Tormek's jig storage trays are made from tough, durable EPP. Each tray is custom designed to hold an assortment of jigs and accessories for a particular purpose. These trays  do not include any jigs. They are intended to help store and organize jigs you already have.  Each of the three trays will fit into the\n   \u003ca data-prev-url=\"\/tormek-case.aspx\" href=\"\/products\/tormek-case\"\u003e\n    TC-800 Storage Case\n   \u003c\/a\u003e\n   or a drawer of the\n   \u003ca data-prev-url=\"\/tormek-ts-740-sharpening-station.aspx\" href=\"\/products\/tormek-ts-740-sharpening-station\"\u003e\n    TS-740 Sharpening Station\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The\n   \u003cspan style=\"font-weight:bold; color:#660000;\"\u003e\n    T8-00 tray\n   \u003c\/span\u003e\n   holds all of the accessories that come with the\n   \u003ca data-prev-url=\"\/tormek-t8-sharpening-system.aspx\" href=\"\/products\/tormek-t8-sharpening-system\"\u003e\n    T-8 Sharpening System\n   \u003c\/a\u003e\n   . The\n   \u003cspan style=\"font-weight:bold; color:#660000;\"\u003e\n    HTK-00 tray\n   \u003c\/span\u003e\n   holds all of the jigs included in the\n   \u003ca data-prev-url=\"\/tormekhtk-705handtoolkit.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/tormekhtk-705handtoolkit.aspx\"\u003e\n    HTK-808 Hand Tool Kit\n   \u003c\/a\u003e\n   a selection of jigs that will hellp you sharpen most hand tools. The\n   \u003cspan style=\"font-weight:bold; color:#660000;\"\u003e\n    TNT-00 tray\n   \u003c\/span\u003e\n   holds all of the jigs included in the\n   \u003ca data-prev-url=\"\/tormektnt-708woodturnerskit.aspx\" href=\"\/products\/tormektnt-708woodturnerskit\"\u003e\n    TNT-808 Wood Turners Kit\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Fit\n   \u003cspan style=\"font-weight:normal; font-size:.9em; color: black;font-style:italic;\"\u003e\n    - The trays DO NOT come with any jigs. This is just a list of the jigs they are designed to hold.\n   \u003c\/span\u003e\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    \u003cb\u003e\n     T8-00\n    \u003c\/b\u003e\n   \u003c\/li\u003e\n   \u003cul style=\"margin-top:-2px;\"\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormekproanglemaster.aspx\" href=\"\/products\/tormekproanglemaster\"\u003e\n      WM-200 AngleMaster\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormekhandbook.aspx\" href=\"\/products\/tormekhandbook\"\u003e\n      HB-10 Tormek Handbook\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormekstonegrader.aspx\" href=\"\/products\/tormekstonegrader\"\u003e\n      SP-650 Stone Grader\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormekstroppingpaste.aspx\" href=\"\/products\/tormekstroppingpaste\"\u003e\n      PA-70 Honing Compound\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormektruinganddressingtool.aspx\" href=\"\/products\/tormektruinganddressingtool\"\u003e\n      TT-50 Truing Tool\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormek-square-edge-jig.aspx\" href=\"\/products\/tormek-square-edge-jig\"\u003e\n      SE-77 Square Edge Jig\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cli\u003e\n    \u003cb\u003e\n     HTK-00 - SVM\n    \u003c\/b\u003e\n    \u003cspan style=\"Font style:italic;\"\u003e\n     (This is the older version, which was designed for the SVM-45 and SVM-140 Knife Jigs. It will accept the current KJ-45 and KJ-140 Knife Jigs with a little modification.)\n    \u003c\/span\u003e\n   \u003c\/li\u003e\n   \u003cul style=\"margin-top:-2px;\"\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormekshortknifejig.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/tormekshortknifejig.aspx\"\u003e\n      SVM-45 Knife Jig\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormeklongknifejig1.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/tormeklongknifejig1.aspx\"\u003e\n      SVM-140 Knife Jig\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormek-svm-00-small-knife-holder.aspx\" href=\"\/products\/tormek-svm-00-small-knife-holder\"\u003e\n      SVM-00 Small Knife Holder\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormekscissorjig.aspx\" href=\"\/products\/tormekscissorjig\"\u003e\n      SVX-150 Scissors Jig\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormekaxegrindingjig.aspx\" href=\"\/products\/tormekaxegrindingjig\"\u003e\n      SVA-170 Axe Jig\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormek-svs38-short-tool-jig.aspx\" href=\"\/products\/tormek-svs38-short-tool-jig\"\u003e\n      SVS-38 Short Tool Jig\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cli\u003e\n    \u003cb\u003e\n     HTK-00 - KJ\n    \u003c\/b\u003e\n    \u003cspan style=\"Font style:italic;\"\u003e\n     (This is the current version, which is designed for the KJ-45 and KJ-140 Knife Jigs. It should accept the older SVM-45 and SVM-140 Knife Jigs.)\n    \u003c\/span\u003e\n   \u003c\/li\u003e\n   \u003cul style=\"margin-top:-2px;\"\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormek-kj-45-centering-knife-jig.aspx\" href=\"\/products\/tormek-kj-45-centering-knife-jig\"\u003e\n      KJ-45 Knife Jig\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormek-kj-140-wide-centering-knife-jig.aspx\" href=\"\/products\/tormek-kj-140-wide-centering-knife-jig\"\u003e\n      KJ-140 Knife Jig\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormek-svm-00-small-knife-holder.aspx\" href=\"\/products\/tormek-svm-00-small-knife-holder\"\u003e\n      SVM-00 Small Knife Holder\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormekscissorjig.aspx\" href=\"\/products\/tormekscissorjig\"\u003e\n      SVX-150 Scissors Jig\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormekaxegrindingjig.aspx\" href=\"\/products\/tormekaxegrindingjig\"\u003e\n      SVA-170 Axe Jig\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormek-svs38-short-tool-jig.aspx\" href=\"\/products\/tormek-svs38-short-tool-jig\"\u003e\n      SVS-38 Short Tool Jig\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cli\u003e\n    \u003cb\u003e\n     TNT-00\n    \u003c\/b\u003e\n   \u003c\/li\u003e\n   \u003cul style=\"margin-top:-2px;\"\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormektnt-300woodturnersinstructionbox.aspx\" href=\"\/products\/tormektnt-300woodturnersinstructionbox\"\u003e\n      TNT-300 Woodturner's Instruction Box\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormekturningtoolsettertts-100.aspx\" href=\"\/products\/tormekturningtoolsettertts-100\"\u003e\n      TTS-100 Turning Tool Setter\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormekdustcover.aspx\" href=\"\/products\/tormekdustcover\"\u003e\n      MH-380 Machine Cover\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormekla120profilestrop.aspx\" href=\"\/products\/tormekla120profilestrop\"\u003e\n      LA-120 Profiled Honing Wheel\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormek-gouge-jig.aspx\" href=\"\/products\/tormek-gouge-jig\"\u003e\n      SVD-186 R Gouge Jig\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormekmultitooljig.aspx\" href=\"\/products\/tormekmultitooljig\"\u003e\n      SVS-50 Multi Jig\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n    \u003cli\u003e\n     \u003ca data-prev-url=\"\/tormektoolrest.aspx\" href=\"\/products\/tormektoolrest\"\u003e\n      SVD-110 Tool Rest\n     \u003c\/a\u003e\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003c!--mfg propagandaHTK-00The HTK-00 Storage Tray stores all the jigs included with the Hand Tool Kit. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.Designed to hold:    SVM-45 Knife Jig    SVM-140 Knife Jig    SVM-00 Small Knife Holder    SVX-150 Scissors Jig    SVA-170 Axe Jig    SVS-38 Short Tool Jig===============================TNT-00The TNT-00 Storage Tray stores all the jigs included with the Woodturners Kit. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.Designed to hold:    TNT-300 Woodturner's Instruction Box    TTS-100 Turning Tool Setter    MH-380 Machine Cover    LA-120 Profiled Honing Wheel    SVD-186 R Gouge Jig    SVS-50 Multi Jig    SVD-110 Tool Rest===============================T8-00The T8-00 Storage Tray stores all the accessories included with the Tormek T-8. The storage tray has an improved design and is customized to fit in the Tormek Case TC-800 and the Sharpening Station TS-740.The storage tray is made of EPP, a permanent construction material that is durable and ready for many years of holding jigs in their places.Designed to hold:    WM-200 AngleMaster    HB-10 Tormek Handbook    SP-650 Stone Grader    PA-70 Honing Compound    TT-50 Truing Tool    SE-77 Square Edge Jig--\u003e\n  \u003c\/ul\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"T-8 Tray","offer_id":50822024855834,"sku":"186344","price":37.0,"currency_code":"USD","in_stock":true},{"title":"TNT-00 Woodturner's Kit Tray","offer_id":50822024888602,"sku":"186343","price":41.0,"currency_code":"USD","in_stock":true},{"title":"HTK-00 Hand Tool Kit Tray - SVM","offer_id":50822024921370,"sku":"186342","price":25.46,"currency_code":"USD","in_stock":true},{"title":"HTK-00 Hand Tool Kit Tray - KJ","offer_id":50822024954138,"sku":"186370","price":41.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186343a.jpg?v=1751687388"},{"product_id":"tormek-case","title":"Tormek TC-800 Case","description":"\u003cbody\u003e\n  \u003cp\u003e\n   The Tormek TC-800 case helps protect your Tormek jigs and accessories for storage and transport. It's made of tough EPP and has a clear sliding lid and a leather handle.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The TC-800 works best when paired with one of Tormek's\n   \u003ca data-prev-url=\"\/tormek-storage-tray.aspx\" href=\"\/products\/tormek-storage-tray\"\u003e\n    HTK-00, TNT-00 or T8-00 Jig Storage Trays\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Please note that previous storage trays for HTK-706, TNT-708 and the former top box for Tormek T-8 are not compatible with TC-800 Tormek Case.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50822025642266,"sku":"186341","price":93.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186341-01d.jpg?v=1768342876"},{"product_id":"tormek-composite-honing-wheel","title":"Tormek CW-220 Composite Honing Wheel","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek CW-220 Composite Honing Wheel\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The composite honing wheel can be used in place of the standard leather honing wheel.  It was designed for use in clean environments like in a commercial kitchen and so it's designed not to be used with honing compound.   The unique matrix of the composite has an integrated polish, needing only a light water misting or dampening of the wheel with a sponge.  This composite will not hone to as fine an edge as the leather honing wheel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This wheel fits the Tormek T-8 and other machines that use 220mm honing wheels. It does not fit the T-4 or other small Tormeks.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50822038585626,"sku":"186345","price":137.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186345d.jpg?v=1768342995"},{"product_id":"tormek-edge-marker","title":"Tormek EM-15 Edge Marker","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek EM-15 Edge Marker\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The EM-15 is a quality permanent marker to color the bevel when setting the edge angle. A very common method for determining the\n existing edge angle on various tools.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50822038749466,"sku":"186346","price":6.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186346d.jpg?v=1768343000"},{"product_id":"tormek-kj-45-centering-knife-jig","title":"Tormek KJ-45 Centering Knife Jig","description":"\u003cbody\u003e\n  \u003cp\u003e\n   With Tormek's patented KJ-45 Centering Knife Jig, you'll get symmetrical bevels with the same angle on both sides of the knife, regardless of the thickness\n or geometry of the blade. Whether you're sharpening a regular kitchen knife or a thicker, tapered hunting knife, you'll get the same results on both bevels of\n the knife without needing to reset the jig. The KJ-45 Centering Knife Jig fits most types of knives: household knives, chef's knives, craft knives and knives\n for hunting and fishing. It also works for the woodcarver's straight drawknives and the gardener's pruning shears.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   When you mount your knife in the KJ-45 Centering Knife Jig, the knife self-centers in the jig, whatever its thickness or geometry. This means that the jig\n centers everything from the thinnest knives to knives with a thickness of up to 10 mm (7\/16\"). It also means that knife blades that taper off from back\n to edge and heel to tip are centered in the jig, providing symmetrical grinding on both bevels of the knife. Easy setup, perfect results.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This makes it possible to sharpen knives with different blade shapes, from craft knives to recurve knives and classic chef's knives. Because the KJ-45 Centering\n Knife Jig is positioned with the stop resting freely against the universal support, you are able to follow the shapes of the knife, always guided by the universal\n support as a reference point.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Features:\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-3px;\"\u003e\n   \u003cli\u003e\n    Centers the knife in the jig for optimal,symmetrical results\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Centers tapered knives and holds them firmly\n   \u003c\/li\u003e\n   \u003cli\u003e\n    An extra stop for tall knives, such as cleavers\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Ability to shape a slightly convex edge with a movement between the two stops\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Robust design – zinc-cast clamps and durable composite handle\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Well-balanced – most of the weight is focused to the clamps, which provides a more balanced feel when sharpening\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Slides smoothly with low friction against the universal support\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Works with both Tormek T-4 and Tormek T-8, as well as older models\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   The KJ-45 Centering Knife Jig centers knife blades up to 10 mm thick. You can sharpen knives with blades down to 60 mm (2 3\/8\")\n long and 12 mm (8\/16\") tall. For smaller knives, you can combine the knife jig with the\n   \u003ca data-prev-url=\"\/tormek-svm-00-small-knife-holder.aspx\" href=\"\/products\/tormek-svm-00-small-knife-holder\"\u003e\n    SVM-00 Small Knife Holder\n   \u003c\/a\u003e\n   ,\n which enables you to sharpen even your very smallest knives. The KJ-45 Centering Knife Jig has an extra stop that makes it possible to sharpen really tall knives, such as\n cleavers. In combination with the\n   \u003ca data-prev-url=\"\/tormekuniversalsupportbarextended.aspx\" href=\"\/products\/tormekuniversalsupportbarextended\"\u003e\n    US-430 Universal Support Extended\n   \u003c\/a\u003e\n   , you can sharpen even taller knives or tools.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   For knives with long and flexible blades, such as filleting knives, there is the\n   \u003ca data-prev-url=\"\/tormek-kj-140-wide-centering-knife-jig.aspx\" href=\"\/products\/tormek-kj-140-wide-centering-knife-jig\"\u003e\n    KJ-140 Wide Centering Knife Jig\n   \u003c\/a\u003e\n   ,\n which stabilizes flexible blades for even and symmetrical results.\n  \u003c\/p\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50822079316250,"sku":"186357","price":73.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186357-03d.jpg?v=1768343357"},{"product_id":"tormek-kj-140-wide-centering-knife-jig","title":"Tormek KJ-140 Wide Centering Knife Jig","description":"\u003cbody\u003e\n  \u003cp\u003e\n   This well-balanced, patented jig provides extra stability when sharpening knives with long, flexible blades such as fillet knives. With the KJ-140\n Wide Centering Knife Jig, you achieve a symmetrical grind with the same angle on both sides of the blade. Regardless of the thickness and geometry of\n the blade, it will self-center in the jig, giving you the same result on both bevels. The longer clamp stabilizes flexible knife blades to prevent\n them from bending, so that you get the same angle and pressure over the entire bevel.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   When you mount your knife in the KJ-140 Wide Centering Knife Jig, the knife self-centers in the jig, whatever its thickness or geometry. This means\n that the jig centers everything from the thinnest knives to knives with a blade thickness of up to 10 mm (7\/16\"). It also means that knife blades\n that taper off from back to edge and heel to tip are centered in the jig, providing symmetrical bevels on both sides of the blade. Easy setup, perfect\n results.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The KJ-140 Wide Centering Knife Jig works in the same way as the KJ-45 Centering Knife Jig but has a wider clamp. The wider 140 mm (5 1\/2\") clamp\n stabilizes thin and flexible knife blades and provides more support for an even bevel along the entire blade. Of course it can also be used with larger\n knives with more stable blades, such as chef's knives.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Because the KJ-140 Wide Centering Knife Jig is positioned with the stop resting freely against the universal support, you are able to follow the shapes\n of the knife, always guided by the universal support as a reference point. This makes it possible to sharpen knives with different blade shapes, from\n fillet knives to recurve knives and classic chef's knives.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   the KJ-140 Jig holds knives 160mm (6-1\/4\" and longer. The blade must be at least 12mm (1\/2\") wide. Maximum thickness is 10mm (3\/8\") for standard blades\n and 6mm (1\/4\") fro fully tapered blades.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Features:\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-3px;\"\u003e\n   \u003cli\u003e\n    Centers long, flexible knife blades in the jig for optimal, symmetrical results\n   \u003c\/li\u003e\n   \u003cli\u003e\n    The 140 mm (5 1\/2\") wide clamp stabilizes flexible blades\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Centers tapered knives and holds them firmly\n   \u003c\/li\u003e\n   \u003cli\u003e\n    An extra stop for tall knives, such as cleavers\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Ability to shape a slightly convex edge with a movement between the two stops\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Robust design – zinc-cast clamps and fiberglass-reinforced composite stops\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Well-balanced – most of the weight is focused on the clamps, which provides a more balanced feel when grinding\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Slides smoothly with low friction against the universal support\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Works with both Tormek T-4 and Tormek T-8, as well as older models\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cstrong\u003e\n   Important:\n  \u003c\/strong\u003e\n  The KJ-140 Wide Centering Knife Jig cannot be used with the SVM-00 Small Knife Holder. Use the\n  \u003ca data-prev-url=\"\/tormek-kj-45-centering-knife-jig.aspx\" href=\"\/products\/tormek-kj-45-centering-knife-jig\"\u003e\n   KJ-45 Centering Knife Jig\n  \u003c\/a\u003e\n  instead.\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50822079447322,"sku":"186358","price":93.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186358d.jpg?v=1768343358"},{"product_id":"tormek-r-23-drive-wheel-with-rubber-ring-for-t-8","title":"Tormek R-23 Drive Wheel with Rubber Ring for T-8","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Also fits the T-7 and 2000\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Has the drive wheel on your Tormek given up after many years of faithful service? The Tormek R-23 Drive Wheel with Rubber Ring is a spare part that breathes new life into your Tormek. If your drive wheel is worn out, the rubber has dried or the wheel is damaged, you can easily replace it with the R-23 Drive Wheel. This drive wheel fits the Tormek T-8, as well as older machine models with a grinding wheel 9 7\/8\" (250 mm) in diameter.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Easy to replace and install.\n  \u003c\/p\u003e\n  \u003cbr\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50822096060698,"sku":"186111","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186111d.jpg?v=1768343483"},{"product_id":"tormek-r-21-drive-wheel-with-rubber-ring-for-t-4","title":"Tormek R-21 Drive Wheel with Rubber Ring for T-4","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Also fits the T-3 and T-2\/T-1 Knife Shapeners\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Has the drive wheel on your Tormek given up after many years of faithful service? The Tormek R-21 Drive Wheel with Rubber Ring is a spare part that breathes new life into your Tormek. If your drive wheel is worn out, the rubber has dried or the wheel is damaged, you can easily replace it with the R-21 Drive Wheel. This drive wheel fits the Tormek T-4, as well as older machine models with a grinding wheel 7 7\/8\" (200 mm) in diameter.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Easy to replace and install.\n  \u003c\/p\u003e\n  \u003cbr\u003e\n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50822096191770,"sku":"186196","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186196d.jpg?v=1768343484"},{"product_id":"tormek-220x-original-grindstone-200mm-8-inch","title":"Tormek 220x Original Grindstone - 200mm - 8 inch","description":"\u003cp\u003eReplacement 220 Grit Grinding Wheel for Tormek T-4 Sharpeners. Also, fits the Tormek T-3.\u003c\/p\u003e\n\u003cp\u003eThe Tormek SG-200 Original Grindstone fits the Tormek T-4 and all earlier machine models with a grinding wheel 200 mm (7 7\/8\") in diameter. It's been developed over the years to combine efficient sharpening and a fine surface finish with a long service life. The more compact dimensions are adapted to our more compact machines for anyone with limited space or those who need to easily transport their Tormek. The SG-200 Original Grindstone is supplied as standard with the Tormek T-4 Original and Tormek T-4 Bushcraft.\u003c\/p\u003e\n\u003cp\u003eThe SG-200 Original Grindstone is the perfect all-round grindstone. The grit can be adjusted between 220 and 1000 grit with the SP-650 Stone Grader. This makes it excellent for both coarse and fine sharpening, and it easily sharpens most types of tools and steel grades.\u003c\/p\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50822097436954,"sku":"186121","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186121d.jpg?v=1768343488"},{"product_id":"tormek-wb-250-water-trough","title":"Tormek WB-250 Water Trough","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tormek WB-250 Water Trough\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This was the standard water trough on Tormek 250mm (10\") sharpeners built before 2010. It fits these models : Supergrind 2004, Supergrind 2006 \u0026amp; T-7.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The WB-250 trough was superceded by the\n   \u003ca data-prev-url=\"\/tormek-t-7-advanced-water-trough.aspx\" href=\"\/products\/tormek-t-7-advanced-water-trough\"\u003e\n    AWT-250 Advanced Water trough in 2010.\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This trough does not fit the T-8, T-4 or T-3 sharpener.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Tormek","offers":[{"title":"Default Title","offer_id":50822113362202,"sku":"186395","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/186395-01d.jpg?v=1768343600"}],"url":"https:\/\/www.highlandwoodworking.com\/collections\/tormek-jigs-and-accessories-sale.oembed?page=2","provider":"Highland Woodworking","version":"1.0","type":"link"}