{"title":"Woodworking Hardware","description":"\u003cdiv\u003eThere are endless useful pieces of hardware a woodworker should have available in his shop. Having the right gizmo on hand means you don't have to interrupt your work flow.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eHave you ever been charged to make a last minute gift, and decided a simple lazy susan would be an excellent solution? Then, after the finish dried, (and the game ended), right before you had to rush out the door to attend the birthday party for your wife's Aunt Liz, you discovered you were out of lazy susan bearings? \u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eStock your shop with bits, bolts, screws, fasteners and all kinds of fun widgets. You know you will eventually need them and they might just save your day.\u003c\/div\u003e","products":[{"product_id":"spaxflat-headzincplatedscrews10x1-12boxof60","title":"Spax Flat-Head Zinc Plated Screws - Unidrive - Square Drive","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Square\/phillips combination drive with unique serrated pilot threads to eliminate most pre-drilling!\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Deep, sharp threads, thin shanks and visibly-superior finishing make these screws penetrate more easily\n than any others. Spax screws are extraordinarily strong, and their unique “toothed” pilot threads\n make them almost universally self-drilling. You can drive #10 x 3-1\/2\" screws into unpiloted hard maple -\n normally an exercise in wasted screws - with no breakage. Their head design is the most convenient available:\n they feature a combination recess that accepts either phillips or square drive bits.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   SPAX Multi-Purpose construction screws are a versatile multi-material fastener solution for a wide range of interior\n applications, including wood, concrete, masonry, sheet metal and plastic. These screws are made from Cold-rolled carbon\n steel wire, heat treated for strength and durability, and plated with zinc finish to prevent red rust. Clear zinc is\n tested and recognized for use in above ground contact pressure treated lumber for interior dry\/damp general construction\n applications (e.g., AWPA UC1-UC2).\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Drive Bits\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   Spax Unidrive Screws can be driven with either Philips or Square drive.\n  \u003c\/p\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    #6 screws use #1 square drive or Philips bits\n   \u003c\/li\u003e\n   \u003cli\u003e\n    #8 and #10 screws use #2 square drive or Philips bits\n   \u003c\/li\u003e\n   \u003cli\u003e\n    #12 and #14 use #3 square drive or Philips bits\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Note:\n   \u003c\/strong\u003e\n   Each 1lb box of screws comes with one(1) Spax combo Phillips\/Square drive bit.\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\n\nSPAX® Multi-Purpose construction screws are a versatile multi-material fastener solution for a wide range of interior\n applications, including wood, concrete, masonry, sheet metal and plastic. Unidrive combination head can be used\n with either Phillips or square drive bit.\n\nCold-rolled carbon steel wire, heat treated for strength and durability, and plated with zinc finish to prevent red rust.\n Clear zinc is tested and recognized for use in above ground contact pressure treated lumber for interior dry\/damp general\n construction applications (e.g., AWPA UC1-UC2).\n\nFeatures\n• IRC \/ IBC Code Compliant DrJ TER No. 2010-02 Construction Screw Properties\n• Heat treated for strength and durability\n• Patented thread serration technology offers faster drive, professional installation, and reduces splitting\n• Unique 4CUT™ Point requires no pre-drilling\n• Head designed to countersink flush with material\n• Unidrive combination can be used with phillips or square drive bit\n--\u003e\n \n\u003c\/body\u003e","brand":"Spax","offers":[{"title":"No. 6 x 5\/8 inch - Pack of 50","offer_id":50821575442714,"sku":"350162","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 6 x 3\/4 inch - Pack of 45","offer_id":50821575475482,"sku":"350202","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 6 x 1 inch - Pack of 40","offer_id":50821575508250,"sku":"350252","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 6 x 1-1\/4 inch - Pack of 35","offer_id":50821575541018,"sku":"350322","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 6 x 1-1\/2 inch - Pack of 30","offer_id":50821575573786,"sku":"350402","price":4.0,"currency_code":"USD","in_stock":true},{"title":"No. 6 x 1-3\/4 inch - Pack of 25","offer_id":50821575606554,"sku":"350452","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 5\/8 inch - Pack of 40","offer_id":50821575639322,"sku":"400162","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 5\/8 inch - 1lb box w\/ bit approx. 400 screws","offer_id":50821575672090,"sku":"400164","price":15.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 3\/4 inch - Pack of 35","offer_id":50821575704858,"sku":"400202","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 3\/4 inch - 1lb box w\/ bit approx. 350 screws","offer_id":50821575737626,"sku":"400204","price":15.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1 inch - Pack of 30","offer_id":50821575770394,"sku":"400252","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-1\/4 inch - Pack of 30","offer_id":50821575803162,"sku":"400322","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-1\/4 inch - 1lb box w\/ bit approx. 235 screws","offer_id":50821575835930,"sku":"400326","price":15.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-1\/2 inch - Pack of 25","offer_id":50821575868698,"sku":"400402","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-1\/2 inch - 1lb box w\/ bit approx. 182 screws","offer_id":50821575901466,"sku":"400406","price":15.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-3\/4 inch - Pack of 20","offer_id":50821575934234,"sku":"400452","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 2 inch - Pack of 20","offer_id":50821575967002,"sku":"400502","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 2 inch - 1lb box w\/ bit approx. 156 screws","offer_id":50821575999770,"sku":"400506","price":15.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 2-1\/2 inch - Pack of 20","offer_id":50821576032538,"sku":"400602","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 2-1\/2 inch - 1lb box w\/ bit approx. 128 screws","offer_id":50821576065306,"sku":"400604","price":15.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 3\/4 inch - Pack of 20","offer_id":50821576098074,"sku":"500202","price":4.0,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 1 inch - Pack of 20","offer_id":50821576130842,"sku":"500252","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 1-1\/4 inch - Pack of 20","offer_id":50821576163610,"sku":"500322","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 1-1\/2 inch - Pack of 15","offer_id":50821576196378,"sku":"500402","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 1-1\/2 inch - 1lb box w\/ bit approx. 125 screws","offer_id":50821576229146,"sku":"500404","price":15.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 2 inch - Pack of 12","offer_id":50821576261914,"sku":"500502","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 2 inch - 1lb box w\/ bit approx. 100 screws","offer_id":50821576294682,"sku":"500506","price":15.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 2-1\/4 inch - Pack of 12","offer_id":50821576327450,"sku":"500602","price":4.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 1-1\/2 inch - Pack of 12","offer_id":50821576360218,"sku":"550402","price":3.25,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 2-1\/2 inch - 1lb box w\/ bit approx. 73 screws","offer_id":50821576392986,"sku":"500606","price":15.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 3 inch - 1lb box w\/ bit approx. 67 screws","offer_id":50821576425754,"sku":"500756","price":15.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 3-1\/2 inch - 1lb box w\/ bit approx. 52 screws","offer_id":50821576458522,"sku":"500906","price":15.5,"currency_code":"USD","in_stock":true},{"title":"No. 12 x 2 inch - Pack of 12","offer_id":50821576491290,"sku":"550502","price":3.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/spax-fh-zinc-01.jpg?v=1768340555"},{"product_id":"1squaredrivebitspair","title":"#1 Square Drive Bits - Pair","description":"\u003cp\u003ePair of #1 square drive bits.\u003c\/p\u003e","brand":"Vermont American","offers":[{"title":"Default Title","offer_id":50821576655130,"sku":"425404","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/425404.jpg?v=1751677183"},{"product_id":"2squaredrivebitspair","title":"#2 Square Drive Bits - Pair","description":"\u003cp\u003ePair of #2 square drive bits.\u003c\/p\u003e","brand":"Vermont American","offers":[{"title":"Default Title","offer_id":50821576720666,"sku":"425405","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/425405.jpg?v=1751677185"},{"product_id":"3squaredrivebitspair","title":"#3 Square Drive Bits - Pair","description":"\u003cp\u003ePair of #3 square drive bits.\u003c\/p\u003e","brand":"Vermont American","offers":[{"title":"Default Title","offer_id":50821576786202,"sku":"425406","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/425406.jpg?v=1751677187"},{"product_id":"spax-flat-head-yellow-zinc-plated-screw","title":"Spax Flat-Head Yellow Zinc Plated Screws - Unidrive - Square Drive","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Spax Flat-Head Yellow Zinc Plated Screws\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Square\/phillips combination drive with unique serrated pilot threads to eliminate most pre-drilling!\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Deep, sharp threads, thin shanks and visibly-superior finishing make these screws penetrate more easily\n than any others. Spax screws are extraordinarily strong, and their unique “toothed” pilot threads\n make them almost universally self-drilling. You can drive #10 x 3-1\/2\" screws into unpiloted hard maple -\n normally an exercise in wasted screws - with no breakage. Their head design is the most convenient available:\n they feature a combination recess that accepts either phillips or square drive bits.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   SPAX Multi-Purpose construction screws are a versatile multi-material fastener solution for a wide range of interior\n applications, including wood, concrete, masonry, sheet metal and plastic. These screws are made from old-rolled carbon\n steel wire, heat treated for strength and durability, and plated with yellow zinc finish to prevent red rust. Yellow zinc\n is tested and recognized for use in above ground contact pressure treated lumber for interior dry\/damp general\n construction applications (e.g., AWPA UC1-UC2).\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Drive Bits\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   Spax Unidrive Screws can be driven with either Philips or Square drive.\n  \u003c\/p\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    #6 screws use #1 square drive or Philips bits\n   \u003c\/li\u003e\n   \u003cli\u003e\n    #8 screws use #2 square drive or Philips bits\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003c!--\nmfg propaganda\n\nUNIDRIVE COMBINATION (PH\/SQ) FLAT HEAD YELLOW ZINC\n\nCold-rolled carbon steel wire, heat treated for strength and durability, and plated with yellow zinc finish to prevent\n red rust. Yellow zinc is tested and recognized for use in above ground contact pressure treated lumber for interior\n dry\/damp general construction applications (e.g., AWPA UC1-UC2).\n \nFeatures\n• IRC \/ IBC Code Compliant DrJ TER No. 2010-02 Construction Screw Properties\n• Heat treated for strength and durability\n• Patented thread serration technology offers faster drive, professional installation, and reduces splitting\n• Unique 4CUT™ Point requires no pre-drilling\n• Head designed to countersink flush with material\n• Unidrive combination can be used with Phillips or square drive bit\n--\u003e\n \n\u003c\/body\u003e","brand":"Spax","offers":[{"title":"No. 6 x 1\/2 inch - Pack of 50","offer_id":50821576884506,"sku":"X350132","price":4.0,"currency_code":"USD","in_stock":true},{"title":"No. 6 x 5\/8 inch - Pack of 50","offer_id":50821576917274,"sku":"X350162","price":4.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 3\/4 inch - Pack of 35","offer_id":50821576950042,"sku":"X400202","price":4.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1 inch - Pack of 30","offer_id":50821576982810,"sku":"X400252","price":4.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-1\/4 inch - Pack of 30","offer_id":50821577015578,"sku":"X400322","price":4.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-1\/2 inch - Pack of 25","offer_id":50821577048346,"sku":"X400402","price":4.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 2 inch - Pack of 20","offer_id":50821577081114,"sku":"X400502","price":4.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 2-1\/2 inch - Pack of 20","offer_id":50821577113882,"sku":"X400602","price":4.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/spax-fh-yellow-zinc-04d.jpg?v=1768340557"},{"product_id":"12roundlazysusanbearing","title":"Lazy Susan Bearing","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   Suzy may get a bad rap for lack of ambition, but a Lazy Susan is terribly handy for corner cabinets, display cases and spray\n booth pedestals. This Lazy Susan Bearing has a heavy steel turntable and ball bearing construction.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    3\" is rated for up to 18\" \u0026amp; 200lbs.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    4\" is rated for 12\"-25\" \u0026amp;  300lbs.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    6\" is rated for 15\"-30\" \u0026amp; 500lbs.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    9\" is rated for 18\"-35\" \u0026amp; 750lbs.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    12\" is rated for 20\"+ \u0026amp; 1000lbs.\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/lazy-susan-install.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/lazy-susan-install.pdf\"\u003e\n    Lazy Susan Bearing Installation Instructions\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n\n\u003c\/body\u003e","brand":"Triangle Manufacturing","offers":[{"title":"3 inch - Square","offer_id":50821610733850,"sku":"188111","price":7.0,"currency_code":"USD","in_stock":true},{"title":"4 inch - Square","offer_id":50821610766618,"sku":"188112","price":9.5,"currency_code":"USD","in_stock":true},{"title":"6 inch - Square","offer_id":50821610799386,"sku":"188113","price":9.0,"currency_code":"USD","in_stock":true},{"title":"9 inch - Round","offer_id":50821610832154,"sku":"188114","price":20.0,"currency_code":"USD","in_stock":true},{"title":"12 inch - Round","offer_id":50821610864922,"sku":"188115","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/188115-12lazysusan.jpg?v=1751677830"},{"product_id":"figure8tabletopfastenerspk12","title":"Zinc Figure 8 Table Top Fasteners","description":"\u003cp\u003eFigure 8 fasteners are a fast and secure way to attach table tops to table aprons while allowing for seasonal movement. Use a 3\/4\" Forstner bit to mortise 1\/8\" into the top of the apron. Secure this large end of the fastener into this mortise with a #8 x 1\" screw (the other half will hang over the inside edge of the apron.) Drive another screw through this end of the fastener into the table top from underneath. The oversize hole in the fastener allows for movement. Fasteners are 1-5\/16\" long x 3\/4\" wide (large end) or 5\/8\" wide (small end) and 1\/8\" thick. Steel.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e Screws not included. \u003c\/b\u003e\u003c\/p\u003e","brand":"Knape \u0026 Vogt Mfg","offers":[{"title":"Pack of 10","offer_id":50821620597018,"sku":"188122","price":6.5,"currency_code":"USD","in_stock":true},{"title":"Pack of 100","offer_id":50821620629786,"sku":"188121","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/188101.jpg?v=1751678013"},{"product_id":"bedbolt","title":"Bed Bolt","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Bed Bolt\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Traditional bed bolts securely fasten side rails to headboard posts.  They go together\n quickly during assembly and break down easily on moving day. Ours will also replace some\n missing hardware on existing beds.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   6\" overall length, 3\/8\" diameter bolt requires a 7\/16\" through hole.\n Includes a washer and a square nut.\n   \u003ca data-prev-url=\"\/bedboltwrench.aspx\" href=\"\/products\/bedboltwrench\"\u003e\n    Bed bolt wrench\n   \u003c\/a\u003e\n   and\n   \u003ca data-prev-url=\"\/brassbedboltcover.aspx\" href=\"\/products\/brassbedboltcover\"\u003e\n    brass bed bolt cover\n   \u003c\/a\u003e\n   also available.\n   \u003cb\u003e\n    Please note that the threading on this bolt is non-standard @ 14 threads per inch\n   \u003c\/b\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"Default Title","offer_id":50821642092826,"sku":"188107","price":8.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/188107.jpg?v=1751678386"},{"product_id":"bedboltwrench","title":"Bed Bolt Wrench","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Bed Bolt Wrench\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Fits into the counter bore on bedposts to remove\/tighten our\n   \u003ca data-prev-url=\"\/bedbolt.aspx\" href=\"\/products\/bedbolt\"\u003e\n    bed bolts\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"Default Title","offer_id":50821642191130,"sku":"188109","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/188109.jpg?v=1751678388"},{"product_id":"5bedrailfastenersset4","title":"5 inch Bed Rail Fasteners - Set\/4","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    5 inch Bed Rail Fasteners - Set\/4\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This bed hardware allows a bed's side rails to securely hook into the\nheadboard and footboard. No wrenches or tools are needed to assemble or disassemble the bed rails to or from the headboard and footboard, other than\na rubber mallet. Shallow mortises are all you need make to install the\nhardware in place. These steel fasteners measure 5\/8\" wide x 1\/8\" thick x 5\" long.\n   \u003cbr\u003e\n   \u003cbr\u003e\n   \u003cb\u003e\n    NOTE: SCREWS NOT INCLUDED.\n   \u003c\/b\u003e\n   We recommend\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/spaxflat-headzincplatedscrews8x1-14boxof110.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/spaxflat-headzincplatedscrews8x1-14boxof110.aspx\"\u003e\n    #8 x 1-1\/4\" flat head screws.\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"Default Title","offer_id":50821646516506,"sku":"188116","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/188116.jpg?v=1751678469"},{"product_id":"setof4benchboltsandnuts","title":"Set of 4 Bench Bolts \u0026 Nuts","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Set of 4 Bench Bolts \u0026amp; Nuts\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Heavy-duty knock-down hardware suitable for assembling a workbench base or\nother large, hard-use furniture. Bolts are 1\/2\" x 6\" hex heads; brass dowel nuts are 25mm x 25mm (.984\") and fit 1\" hole.\n   \u003cb\u003e\n    Please note that the threading on this item is non-standard, and will NOT mate with 1\/2\" x 13 tpi hardware.\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"Default Title","offer_id":50821649269018,"sku":"168045","price":29.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/168045.jpg?v=1751678512"},{"product_id":"spax-t-star-plus-insert-drive-bit","title":"SPAX T-Star Plus Drive Bit","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    SPAX T-Star Plus Drive Bit\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Designed for use with SPAX T-Star Plus fasteners, the extended tip (the Plus in T-Star plus) fits into the recess in\n Spax T-Star screws providing a more connection and less wobble. Bits are made form S2 material for durability.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    T20 Bits\n   \u003c\/b\u003e\n   work with #8, #9, and #10 Spax T-Star screws\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    T30 Bits\n   \u003c\/b\u003e\n   work with #14 Spax T-Star screws\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Insert bits are approximately 1\" long and fit in most standard bit holders.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Quick change drive bits are approximately 2\" long and fit in most standard quick change bit holders.\n  \u003c\/p\u003e\n  \u003c!--\n\u003ch5\u003eAvailable:\u003c\/h5\u003e\n\n\u003cul style=\"margin-top:-3px;\"\u003e\n\u003cli\u003eT20 1-1\/4\u0026#34;\u003c\/li\u003e \n\u003cli\u003eT20 2-1\/4\u0026#34; (2 Pack)\u003c\/li\u003e\n\u003cli\u003eT30 1-1\/4\u0026#34;\u003c\/li\u003e\n\u003cli\u003eT30 2-1\/4\u0026#34; (2 Pack)\u003c\/li\u003e\n\u003c\/ul\u003e\n--\u003e\n  \u003c!--\n\nmfg propaganda\n\n made from S2 material for extreme durability and machined perfectly to work with our T-Star recess drive, deliver a superior bit fit and reduced wobble.\n\n the T-Star Plus bit provides less wobble and a more secure connection.\n \n--\u003e\n \n\u003c\/body\u003e","brand":"Spax","offers":[{"title":"SPAX T-Star Plus 1 inch Insert Drive Bit - T20","offer_id":50821651235098,"sku":"162071","price":2.0,"currency_code":"USD","in_stock":true},{"title":"SPAX T-Star Plus 1 inch Insert Drive Bit - T30","offer_id":50821651267866,"sku":"162072","price":2.0,"currency_code":"USD","in_stock":true},{"title":"SPAX T-Star Plus 2 inch Quick Change  Drive Bit - T20 - 2 Pack","offer_id":50821651300634,"sku":"162073","price":6.25,"currency_code":"USD","in_stock":true},{"title":"SPAX T-Star Plus 2 inch Quick Change Drive Bit -  T30 - 2 Pack","offer_id":50821651333402,"sku":"162074","price":6.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/spax-t-star-plus-drive-01d.jpg?v=1768340800"},{"product_id":"hardwoodtablepin38x1-14pk12","title":"Hardwood Table Pin 3\/8 inch x 1-1\/4 inch - Pack of 12","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Hardwood Table Pin 3\/8\" x 1-1\/4\" - Pack of 12\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   These bullet-shaped pins align the leaves of expansion tables. Just drill a 3\/8\" hole\n in the edge of one leaf and use a\n   \u003ca data-prev-url=\"\/dowelcenterset.aspx\" href=\"\/products\/dowelcenterset\"\u003e\n    Dowel Center\n   \u003c\/a\u003e\n   to mark\n the adjacent leaf for the mating 3\/8\" hole.  Glue the pin in one side only.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"Default Title","offer_id":50821653627162,"sku":"170142","price":4.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/170142.jpg?v=1751678600"},{"product_id":"cmtpanalignstripspackof200","title":"CMT Panalign Strips","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    CMT Panalign Strips\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Panalign strips are made froma special kind of rubber designed to retain elasticity indefinitely. \n They keep door panels properly centered while allowing for wood movement. The rectangular shape makes the strips easy to\n handle. Typical doors require 4 to 8 strips each.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"CMT Tools","offers":[{"title":"200","offer_id":50821783421210,"sku":"102040","price":10.5,"currency_code":"USD","in_stock":true},{"title":"500","offer_id":50821783453978,"sku":"102062","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/102040.jpg?v=1751683248"},{"product_id":"spaceballspanelalignerspackof100","title":"Space Balls Panel Aligners - Pack of 100","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Space Balls Panel Aligners - Pack of 100\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Use Space Balls in the rails and stiles of your cabinet doors to keep the panel centered and\n rattle-free. The 0.26\" diameter synthetic rubber balls will flex to allow for wood movement.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Space Balls","offers":[{"title":"Default Title","offer_id":50821783585050,"sku":"103227","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/103227d.jpg?v=1768341153"},{"product_id":"516in-18threadedinsertwrench","title":"Threaded Insert T Wrench","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Threaded Insert T Wrench\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Threaded Insert T-Wrench - makes it easy to manually fit threaded inserts without damaging insert threads. Each wrench is threaded\n to fit the appropriate insert. This wrench is designed for use with steel or\n   \u003ca data-prev-url=\"\/brass-plated-threaded-inserts-pack-of-10.aspx\" href=\"\/products\/brass-plated-threaded-inserts-pack-of-10\"\u003e\n    brass-plated threaded inserts\n   \u003c\/a\u003e\n   with flat tops.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Please Note:\n   \u003c\/b\u003e\n   We do not recommend this wrench for use with\n   \u003ca data-prev-url=\"\/brass-threaded-inserts-pack-of-10.aspx\" href=\"\/products\/brass-threaded-inserts-pack-of-10\"\u003e\n    solid brass threaded inserts\n   \u003c\/a\u003e\n   . It may work,\n but it is prone to damaging soft solid brass. If you are driving solid brass inserts, we recommend our\n   \u003ca data-prev-url=\"\/driver-brass-threaded-inserts.aspx\" href=\"\/products\/driver-brass-threaded-inserts\"\u003e\n    driver bit\n   \u003c\/a\u003e\n   which is designed for that purpose.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"Aug-32","offer_id":51891582566682,"sku":"142108","price":5.5,"currency_code":"USD","in_stock":true},{"title":"24-Oct","offer_id":51891582599450,"sku":"142103","price":6.5,"currency_code":"USD","in_stock":true},{"title":"1\/4\/2020","offer_id":51891582632218,"sku":"142104","price":6.5,"currency_code":"USD","in_stock":true},{"title":"5\/16\/2018","offer_id":51891582664986,"sku":"142105","price":6.5,"currency_code":"USD","in_stock":true},{"title":"3\/8\/2016","offer_id":51891582697754,"sku":"142106","price":9.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/142105.jpg?v=1751683438"},{"product_id":"brass-threaded-inserts-pack-of-10","title":"Brass Threaded Inserts for Wood","description":"\u003cbody\u003e\n\u003cp\u003eThese threaded inserts are hollow brass cylinders with large wood-screw threads on the outside and machine-screw threads on the inside.  They provide an extremely\nstrong and reliable way to join wood for easy disassembly.  Unlike more commonly available T-nuts, these inserts can be used in blind-stopped holes, leaving visible\nsurfaces unmarred.\u003c\/p\u003e\n\n\u003ch5\u003eInstallation\u003c\/h5\u003e\n\n\u003cp\u003eOne end of the insert has slot for driving it into a pre-drilled hole. You can drive it in using a screwdriver (with care) or our\n\u003ca data-prev-url=\"\/driver-brass-threaded-inserts.aspx\" href=\"\/products\/driver-brass-threaded-inserts\" style=\"font-weight:bold; text-decoration:none;\"\u003e\ndriver bit\u003c\/a\u003e, which is made specifically to drive these inserts. A little wax on the external threads makes installation easier. Internal threads are standard for stove bolts,\nmachine screws, carriage bolts and threaded rod.\u003c\/p\u003e\n\n\u003cp\u003eIf you're only installing a few inserts, you can alos use a bolt and jam nuts (see video below). When using this method, be careful, the brass is soft and easy to damage.\n\u003c\/p\u003e\n\n\u003cp\u003e\u003cb\u003ePlease Note:\u003c\/b\u003e We do NOT recommend our Threaded Insert T Wrench for use with these brass threaded inserts. It can damage the soft brass in these inserts.\u003c\/p\u003e\n\n\u003cp\u003eIndividual sizes are sold in packs of 10.\u003c\/p\u003e\n\n\u003c!--\u003cp\u003eAssortment includes ten each of 6-32, 8\/32, 10\/32, 1\/4\"-20, 5\/16\"-18 \u0026 3\/8\"-16.\u003c\/p\u003e--\u003e\n\n\u003ctable class=\"hwpt\"\u003e\n\t\u003ctr\u003e\n\t\t\u003cth\u003eInternal Thread\u003c\/th\u003e\n\t\t\u003cth\u003eExternal Thread Diameter\u003c\/th\u003e\n\t\t\u003cth\u003eDrill Size\t\u003cfont color=\"red\"\u003e♦\u003c\/font\u003e\n\u003c\/th\u003e\n\t\t\u003cth\u003eLength\u003c\/th\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd\u003e6-32\u003c\/td\u003e\n\t\t\u003ctd\u003e0.328\"\u003c\/td\u003e\n\t\t\u003ctd\u003e17\/64\"\u003c\/td\u003e\n\t\t\u003ctd\u003e13\/32\"\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd\u003e8-32\u003c\/td\u003e\n\t\t\u003ctd\u003e0.328\"\u003c\/td\u003e\n\t\t\u003ctd\u003e17\/64\"\u003c\/td\u003e\n\t\t\u003ctd\u003e13\/32\"\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd\u003e10-24\u003c\/td\u003e\n\t\t\u003ctd\u003e0.453\"\u003c\/td\u003e\n\t\t\u003ctd\u003e25\/64\"\u003c\/td\u003e\n\t\t\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd\u003e10-32\u003c\/td\u003e\n\t\t\u003ctd\u003e0.453\"\u003c\/td\u003e\n\t\t\u003ctd\u003e25\/64\"\u003c\/td\u003e\n\t\t\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd\u003e1\/4\"-20\u003c\/td\u003e\n\t\t\u003ctd\u003e0.453\"\u003c\/td\u003e\n\t\t\u003ctd\u003e25\/64\"\u003c\/td\u003e\n\t\t\u003ctd\u003e1\/2\"\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd\u003e5\/16\"-18\u003c\/td\u003e\n\t\t\u003ctd\u003e0.594\"\u003c\/td\u003e\n\t\t\u003ctd\u003e33\/64\"\u003c\/td\u003e\n\t\t\u003ctd\u003e5\/8\"\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd\u003e3\/8\"-16\u003c\/td\u003e\n\t\t\u003ctd\u003e0.594\"\u003c\/td\u003e\n\t\t\u003ctd\u003e33\/64\"\u003c\/td\u003e\n\t\t\u003ctd\u003e5\/8\"\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd colspan=\"4\"\u003e\n\u003cfont color=\"red\"\u003e♦\u003c\/font\u003e Drill size may vary depending on material and tools. We recommend that you test in scrap of the same material before final installation.\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ca name=\"moreinfo\"\u003e\u003c\/a\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n\n\u003cp\u003e\u003ca data-prev-url=\"\/library\/manuals\/ezlok\/E-ZLOK_HardnessChart.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/ezlok\/E-ZLOK_HardnessChart.pdf\"\u003e\n Guide to Installing Threaded Inserts in Woods of Different Hardness\u003c\/a\u003e PDF\u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"E-Z LOK","offers":[{"title":"6-32 - Pack of 10","offer_id":50821815632154,"sku":"175316","price":9.0,"currency_code":"USD","in_stock":true},{"title":"8-32 - Pack of 10","offer_id":50821815664922,"sku":"175311","price":9.0,"currency_code":"USD","in_stock":true},{"title":"10-24 - Pack of 10","offer_id":50821815697690,"sku":"175312","price":12.5,"currency_code":"USD","in_stock":true},{"title":"1\/4 inch - 20 - Pack of 10","offer_id":50821815730458,"sku":"175313","price":12.5,"currency_code":"USD","in_stock":true},{"title":"5\/16 inch - 18 - Pack of 10","offer_id":50821815763226,"sku":"175314","price":17.5,"currency_code":"USD","in_stock":true},{"title":"3\/8 inch - 16 - Pack of 10","offer_id":50821815795994,"sku":"175315","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/brass-threaded-insert.jpg?v=1751683911"},{"product_id":"wide-brass-picture-molding-hook","title":"Wide Brass Picture Molding Hook - Pack of 4","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Wide Brass Picture Molding Hook - Pack of 4\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   1-3\/4\" high x 5\/8\" wide. Hooks onto 5\/8\" rounded edge on picture molding.\n  \u003c\/p\u003e\n  \u003cbr\u003e\n \n\u003c\/body\u003e","brand":"Anchor Wire","offers":[{"title":"Default Title","offer_id":50821930451226,"sku":"8426064","price":4.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/8426064d.jpg?v=1768342172"},{"product_id":"driver-brass-threaded-inserts","title":"Driver for Brass Threaded Inserts","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Driver for Brass Threaded Inserts\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This driver is used to drive our\n   \u003ca data-prev-url=\"\/brass-threaded-inserts-pack-of-10.aspx\" href=\"\/products\/brass-threaded-inserts-pack-of-10\"\u003e\n    solid brass threaded inserts\n   \u003c\/a\u003e\n   without damaging them. The un-threaded pilot fits inside the insert and the two pins engage\n the slots in the inserts to drive it into the wood (or get it back out). It is designed to be used in a drill at low speed.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This driver bit is not compatible with our\n   \u003ca data-prev-url=\"\/brass-plated-threaded-inserts-pack-of-10.aspx\" href=\"\/products\/brass-plated-threaded-inserts-pack-of-10\"\u003e\n    brass plated steel threaded inserts\n   \u003c\/a\u003e\n   since those inserts are not slotted.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"E-Z LOK","offers":[{"title":"No. 6","offer_id":50821971443994,"sku":"175347","price":15.0,"currency_code":"USD","in_stock":true},{"title":"No. 8","offer_id":50821971476762,"sku":"175348","price":15.0,"currency_code":"USD","in_stock":true},{"title":"No. 10","offer_id":50821971509530,"sku":"175349","price":15.0,"currency_code":"USD","in_stock":true},{"title":"1\/4 inch","offer_id":50821971542298,"sku":"175350","price":15.0,"currency_code":"USD","in_stock":true},{"title":"5\/16 inch","offer_id":50821971575066,"sku":"175351","price":15.0,"currency_code":"USD","in_stock":true},{"title":"3\/8 inch","offer_id":50821971607834,"sku":"175352","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/brass-insert-driver-d.jpg?v=1768342373"},{"product_id":"spax-flat-head-yellow-zinc-t-star-plus-screws","title":"Spax Flat-Head Yellow Zinc T-Star Plus Screws","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Spax Flat-Head Yellow Zinc T-Star Plus Screws w\/ Driver Bit\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   A multi-purpose structural screw with functional qualities that let you drive faster, install easier, and reduce splitting wood. The T-STAR plus Flat Head has a patented MULTIhead that countersinks the screw head flush in wood. The exclusive T-STAR plus Drive offers superior bit engagement to prevent stripping and damaging your screw.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   SPAX T-Star plus flat head fasteners with yellow zinc coating are designed for use in multiple material connections often found inside residential buildings. These \"work horse\" construction fasteners are designed to countersink in wood for a clean-flush finish and provides a quick and easy installation. In addition, they provide long-lasting, \"contractor proven\" secure connections.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Cold-rolled \"carbon steel\" wire, heat treated to grade 5 durability and plated with a yellow zinc finish to prevent red rust. \"Yellow zinc\" is tested and recognized for use in above ground contact pressure treated lumber for interior dry\/damp general construction applications (e.g. AWPA UC1-UC2.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Each box of Spax T-star screws includes one hex insert T-Star drive bit to fit the screws. (T-Star T20 for #8, #9, \u0026amp; #10 screws. T-Star T30 #14 screws.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Features:\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-3px;\"\u003e\n   \u003cli\u003e\n    IRC\/IBC Code Compliant DrJ TER No. 2010-02 Construction Screw Properties\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Heat treated to Grade-5 durability\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Patented thread serrations reduce driving torque to prolong power tool battery life\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Unique 4CUT™ Point prevents splitting and requires no pre-drilling in wood\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003c!--\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e These screws use a T-Star drive, which is included in the box. These screws will \u003cb\u003eNOT\u003c\/b\u003e work with Square\/Philips drivers\u003c\/p\u003e--\u003e\n \n\u003c\/body\u003e","brand":"Spax","offers":[{"title":"No.8 x 1-1\/4in - 1lb Box - Approx. 240","offer_id":50822062637338,"sku":"162101","price":16.5,"currency_code":"USD","in_stock":true},{"title":"No.8 x 1-1\/4in - 3lb Box - Approx. 675","offer_id":50822062670106,"sku":"162102","price":35.5,"currency_code":"USD","in_stock":true},{"title":"No.8 x 1-1\/2in - 1lb Box - Approx. 197","offer_id":50822062702874,"sku":"162103","price":16.5,"currency_code":"USD","in_stock":true},{"title":"No.8 x 2in - 1lb Box - Approx. 161","offer_id":50822062768410,"sku":"162105","price":16.5,"currency_code":"USD","in_stock":true},{"title":"No.8 x 2in - 3lb Box - Approx. 465","offer_id":51801250595098,"sku":"162106","price":35.5,"currency_code":"USD","in_stock":true},{"title":"No.8 x 2-1\/2in - 1lb Box - Approx. 133","offer_id":50822062833946,"sku":"162107","price":16.5,"currency_code":"USD","in_stock":true},{"title":"No.9 x 2-1\/2in - 1lb Box - Approx. 116","offer_id":51801250627866,"sku":"162110","price":16.5,"currency_code":"USD","in_stock":true},{"title":"No.9 x 3-1\/4in - 1lb Box - Approx. 89","offer_id":51801250660634,"sku":"162111","price":16.5,"currency_code":"USD","in_stock":true},{"title":"No.10 x 1-1\/2in - 1lb Box - Approx. 133","offer_id":50822062899482,"sku":"162112","price":16.5,"currency_code":"USD","in_stock":true},{"title":"No.10 x 2in - 1lb Box - Approx. 107","offer_id":50822062932250,"sku":"162113","price":16.5,"currency_code":"USD","in_stock":true},{"title":"No.10 x 2-1\/2in - 1lb Box - Approx. 87","offer_id":50822062965018,"sku":"162114","price":16.5,"currency_code":"USD","in_stock":true},{"title":"No.10 x 2-1\/2in - 3lb Box - Approx. 230","offer_id":50822062997786,"sku":"162115","price":35.5,"currency_code":"USD","in_stock":true},{"title":"No.10 x 3in - 1lb Box - Approx. 72","offer_id":50822063030554,"sku":"162116","price":16.5,"currency_code":"USD","in_stock":true},{"title":"No.10 x 3in - 3lb Box - Approx. 200","offer_id":50822063063322,"sku":"162117","price":39.0,"currency_code":"USD","in_stock":true},{"title":"No.10 x 3-1\/2in - 1lb Box - Approx. 57","offer_id":50822063096090,"sku":"162119","price":16.5,"currency_code":"USD","in_stock":true},{"title":"No.10 x 3-1\/2in - 3lb Box - Approx. 170","offer_id":50822063128858,"sku":"162120","price":35.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/162101d.jpg?v=1768343219"},{"product_id":"spax-flat-head-hcr-x-t-star-plus-screws","title":"Spax Flat-Head HCR-X T-Star Plus Screws","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Spax Flat-Head HCR-X T-Star Plus Screws w\/ Driver Bit\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   SPAX® T-STAR plus Flat Head fasteners with HCR-X™ coating are designed for use in multiple material connections often found outside residential domains.\n These \"work horse\" construction fasteners are designed to countersink in treated lumber for a clean-flush finish and provides a quick and easy installation.\n In addition, they provide long-lasting, \"contractor proven\" secure connections.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Cold-rolled \"carbon steel\" wire, heat treated to grade 5 durability and plated with a HCR-X™ finish to prevent red rust. \"HCR-X™\" is\n tested and recognized for use in ground contact pressure treated lumber for exterior, freshwater general construction applications (e.g. AWPA UC1- UC4A, UCFA).\n SPAX® recommends stainless steel for cedar and redwood attachment applications.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The T-STAR plus Flat Head screw features ribs on the underside of the head that facilitate a clean, flush, or countersunk finish in wood and acts as a break against\n metal hardware to prevent stripping out.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Each box of Spax T-star screws includes one hex insert T-Star drive bit to fit the screws. (T-Star T20 for #8, #9, \u0026amp; #10 screws. T-Star T30 #14 screws.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Features:\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-3px;\"\u003e\n   \u003cli\u003e\n    IRC \/ IBC Code Compliant DrJ TER No. 2010-02 Construction Screw Properties\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Heat treated to Grade-5 durability\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Patented thread serrations reduce driving torque to prolong power tool battery life\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Unique 4CUT™ Point prevents splitting and requires no pre-drilling in wood\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Superior bit fit to eliminate camming out\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003c!--\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e These screws use a T-Star drive, which is included in the box. These screws will \u003cb\u003eNOT\u003c\/b\u003e work with Square\/Philips drivers.\u003c\/p\u003e--\u003e\n \n\u003c\/body\u003e","brand":"Spax","offers":[{"title":"No. 8 x 1-1\/4in 1lb - Approx. 230","offer_id":50822063358234,"sku":"162122","price":20.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-1\/2in 1lb - Approx. 195","offer_id":50822063391002,"sku":"162124","price":20.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 2in 1lb - Approx. 154","offer_id":50822063423770,"sku":"162126","price":20.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 2-1\/2in 1lb - Approx. 124","offer_id":50822063456538,"sku":"162128","price":20.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 2-1\/2in 3lb - Approx. 375","offer_id":50822063489306,"sku":"162129","price":43.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 1-1\/2in 1lb - Approx. 125","offer_id":50822063522074,"sku":"162137","price":20.0,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 2in 1lb - Approx. 99","offer_id":50822063554842,"sku":"162139","price":20.0,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 2in 3lb - Approx. 277","offer_id":50822063587610,"sku":"162140","price":43.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 2-1\/2in 1lb - Approx. 81","offer_id":50822063620378,"sku":"162142","price":20.0,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 3in 1lb - Approx. 67","offer_id":50822063653146,"sku":"162145","price":20.0,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 3in 3lb - Approx. 200","offer_id":50822063685914,"sku":"162146","price":43.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 3-1\/2in 1lb - Approx. 59","offer_id":50822063718682,"sku":"162149","price":20.0,"currency_code":"USD","in_stock":true},{"title":"No. 14 x 1in 1lb - Approx. 115","offer_id":50822063751450,"sku":"162151","price":18.5,"currency_code":"USD","in_stock":true},{"title":"No. 14 x 1-1\/4in 1lb - Approx. 97","offer_id":50822063784218,"sku":"162152","price":18.5,"currency_code":"USD","in_stock":true},{"title":"No. 14 x 1-1\/2in 1lb - Approx. 90","offer_id":50822063816986,"sku":"162153","price":18.5,"currency_code":"USD","in_stock":true},{"title":"No. 14 x 2in 1lb - Approx. 65","offer_id":50822063849754,"sku":"162154","price":18.5,"currency_code":"USD","in_stock":true},{"title":"No. 14 x 2-1\/2in 1lb - Approx. 55","offer_id":50822063882522,"sku":"162155","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/162122d.jpg?v=1768343221"},{"product_id":"spax-wafer-head-yellow-zinc-t-star-plus-screws","title":"Spax Wafer Head Yellow Zinc T-Star Plus Screws","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Spax Wafer Head Yellow Zinc T-Star Plus Screws\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The T-STAR plus wafer head screw has a low-profile design, a larger surface area, and offers an aesthetically clean\n look for reliable installation. Exclusive T-STAR plus drive offers superior bit fit to eliminate camming out. SPAX®\n wafer head, yellow zinc, partial thread fastener is a top of the line cabinet screw and a great choice when a greater\n clamping force is desired. SPAX® T-STAR plus Wafer Head fasteners with yellow zinc coating are designed for use\n in multiple material connections often found inside residential buildings.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   These fasteners are designed with a low profile large diameter wafer head for applications requiring additional surface\n area under the head for superior pull-down force. Ideal for the installation of cabinetry where a flush or countersunk\n installation is not possible or desired. Cold-rolled \"carbon steel\" wire, heat treated to grade 5 durability and\n plated with a yellow zinc finish to prevent red rust. \"Yellow zinc\" is tested and recognized for use in above ground\n contact pressure treated lumber for interior dry\/damp general construction applications\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Ideal for cabinetry and for interior use in multiple materials, SPAX Multi-Purpose Construction Screws are the versatile\n fastening solution you need for professional construction and installation. Prevent stripping and use for a wide range of\n project applications like fencing, framing, and cabinetry.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Features:\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-3px;\"\u003e\n   \u003cli\u003e\n    IRC \/ IBC Code Compliant DrJ TER No. 2010-02 Construction Screw Properties\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Heat treated to Grade-5 durability\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Patented thread serrations reduce driving torque to prolong power tool battery life\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Unique 4CUT™ Point prevents splitting and requires no pre-drilling in wood\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cbr\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Note:\n   \u003c\/strong\u003e\n   These screws use a T-Star drive,\n   \u003cb\u003e\n    NOT\n   \u003c\/b\u003e\n   Square\/Philips\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Spax","offers":[{"title":"No. 8 x 1-1\/4in 1lb Box - Approx. 195","offer_id":50822064177434,"sku":"162161","price":17.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-1\/4in 5lb Box - Approx. 1000","offer_id":50822064210202,"sku":"162162","price":83.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-1\/2in 1lb Box - Approx. 175","offer_id":50822064242970,"sku":"162163","price":18.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 2in 1lb Box - Approx. 140","offer_id":50822064275738,"sku":"162164","price":17.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 2-1\/2in 1lb Box - Approx. 120","offer_id":50822064308506,"sku":"162165","price":17.5,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 2-1\/2in 5lb Box - Approx. 550","offer_id":50822064341274,"sku":"162166","price":82.0,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 2-1\/2in 1lb Box - Approx. 75","offer_id":50822064374042,"sku":"162167","price":17.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 2-1\/2in 5lb Box - Approx. 375","offer_id":50822064406810,"sku":"162168","price":82.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 3in 1lb Box - Approx. 65","offer_id":50822064439578,"sku":"162169","price":17.5,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 3in 5lb Box - Approx. 325","offer_id":50822064472346,"sku":"162170","price":82.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/162161d.jpg?v=1768343222"},{"product_id":"tabletopoffsetfasteners-pk12","title":"Table Top Offset Fasteners - Z Type - Pack of 12","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Table Top Offset Fasteners - Z Type - Pack of 12\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \"Z\"-type table top fasteners fit in a continuous groove in the inside of your table apron and secure the top with\n a #8 Pan head screw.  Before assembly, mill an 1\/8\" wide 3\/8\" deep groove 3\/8\" from the top of the apron.\n Since the \"Z\" clip floats in the groove, it allows for seasonal movement of the top. Clips are 1-1\/4\" Long x\n 3\/4\" wide with a 3\/8\" offset and 3\/4\" long leg. Unfinished steel.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"Default Title","offer_id":50822080561434,"sku":"188105","price":5.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/188105.jpg?v=1751688488"},{"product_id":"spax-pan-head-zinc-plated-screws-unidrive-square-drive","title":"Spax Pan-Head Zinc Plated Screws - Unidrive - Square Drive","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Spax Pan-Head Zinc Plated Screws - Unidrive - Square Drive\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Square\/phillips combination drive with unique serrated pilot threads to eliminate most pre-drilling!\n  \u003c\/p\u003e\n  \u003cp\u003e\n   SPAX Pan Head Multi-Purpose construction screws are a versatile multi-material fastener solution for a wide range\n of interior applications, including wood, concrete, masonry, sheet metal and plastic. Unidrive combination head can\n be used with either Phillips or square drive bit. For use in applications where a flush mount head is not desirable.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Cold-rolled carbon steel wire, heat treated for strength and durability, and plated with zinc finish to prevent red\n rust. Clear zinc is tested and recognized for use in above ground contact pressure treated lumber for interior dry\/damp\n general construction applications (e.g., AWPA UC1-UC2).\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Drive Bits\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   Spax Unidrive Screws can be driven with either Philips or Square drive.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Drive Bits\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   Spax Unidrive Screws can be driven with either Philips or Square drive.\n  \u003c\/p\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    #6 screws use #1 square drive or Philips bits\n   \u003c\/li\u003e\n   \u003cli\u003e\n    #8 screws use #2 square drive or Philips bits\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Note:\n   \u003c\/strong\u003e\n   Each 1lb box of screws comes with one(1) Spax combo Phillips\/Square drive bit.\n  \u003c\/p\u003e\n  \u003c!--\nmfg propganda\n\nUNIDRIVE COMBINATION (PH\/SQ) PAN HEAD ZINC\n\nSPAX® Pan Head Multi-Purpose construction screws are a versatile multi-material fastener solution for a wide range\n of interior applications, including wood, concrete, masonry, sheet metal and plastic. Unidrive combination head can\n be used with either Phillips or square drive bit. For use in applications where a flush mount head is not desirable.\n\nCold-rolled carbon steel wire, heat treated for strength and durability, and plated with zinc finish to prevent red\n rust. Clear zinc is tested and recognized for use in above ground contact pressure treated lumber for interior dry\/damp\n general construction applications (e.g., AWPA UC1-UC2).\n\n\u003cp\u003eDeep, sharp threads, thin shanks and visibly-superior finishing complemented by an exclusive heat-bonded PTFE coating make these screws penetrate\n more easily than any others.  Spax screws are extraordinarily strong, and their unique \u0026#34;toothed\u0026#34; pilot threads make them almost universally\n self-drilling.  You can drive \u0026#35;10 x 3-1\/2\u0026#34; screws into unpiloted hard maple--normally an exercise in wasted screws--with no breakage.\n Their head design is the most convenient available: they feature a combination recess that accepts either phillips or square drive bits.\u003c\/p\u003e\n--\u003e\n \n\u003c\/body\u003e","brand":"Spax","offers":[{"title":"No. 6 x 1\/2 inch - 1lb box w\/ bit approx. 500 screws","offer_id":50822096519450,"sku":"P350134","price":16.0,"currency_code":"USD","in_stock":true},{"title":"No. 6 x 5\/8 inch - 1lb box w\/ bit approx. 445 screws","offer_id":50822096552218,"sku":"P350164","price":16.0,"currency_code":"USD","in_stock":true},{"title":"No. 6 x 3\/4 inch - 1lb box w\/ bit approx. 400 screws","offer_id":50822096584986,"sku":"P350204","price":16.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 5\/8 inch - 1lb box w\/ bit approx. 320 screws","offer_id":50822096617754,"sku":"P400164","price":16.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 3\/4 inch - Pack of 35","offer_id":50822096650522,"sku":"P400202","price":4.25,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 3\/4 inch - 1lb box w\/ bit approx. 280 screws","offer_id":50822096683290,"sku":"P400204","price":16.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1 inch - Pack of 30","offer_id":50822096716058,"sku":"P400252","price":4.25,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1 inch - 1lb box w\/ bit approx. 225 screws","offer_id":50822096748826,"sku":"P400254","price":16.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-1\/4 inch - Pack of 30","offer_id":50822096781594,"sku":"P400322","price":4.25,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-1\/4 inch - 1lb box w\/ bit approx. 200 screws","offer_id":50822096814362,"sku":"P400324","price":16.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-1\/2 inch - Pack of 25","offer_id":50822096847130,"sku":"P400402","price":4.25,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 1-1\/2 inch - 1lb box w\/ bit approx. 180 screws","offer_id":50822096879898,"sku":"P400404","price":16.0,"currency_code":"USD","in_stock":true},{"title":"No. 8 x 2 inch - 1lb box w\/ bit approx. 140 screws","offer_id":50822096912666,"sku":"P400504","price":16.0,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 5\/8 inch - Pack of 25","offer_id":50822096945434,"sku":"P500162","price":4.25,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 5\/8 inch - 1lb box w\/ bit approx. 175 screws","offer_id":50822096978202,"sku":"P500164","price":16.0,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 3\/4 inch - Pack of 20","offer_id":50822097010970,"sku":"P500202","price":4.25,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 3\/4 inch - 1lb box w\/ bit approx. 160 screws","offer_id":50822097043738,"sku":"P500204","price":16.0,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 1 inch - Pack of 20","offer_id":50822097076506,"sku":"P500252","price":4.25,"currency_code":"USD","in_stock":true},{"title":"No. 10 x 1 inch - 1lb box w\/ bit approx. 145 screws","offer_id":50822097109274,"sku":"P500254","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/spax-ph-zinc-01.jpg?v=1768343487"},{"product_id":"spax-no-2-unidrive-insert-bit","title":"SPAX no. 2  Unidrive Insert Bit","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    SPAX no. 2 Unidrive Insert Bit\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Designed for use with SPAX Unidrive fasteners, these provides less wobble and a more secure connection.\n SPAX no. 2 Unidrive Insert Bit are suitable for most common bit holders. Carbon steel construction for durability and strength\n  \u003c\/p\u003e\n  \u003cp\u003e\n   SPAX no. 2 Unidrive Insert Bits work with #8, #9, and #10 Spax Star screws\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Spax","offers":[{"title":"Default Title","offer_id":50822097305882,"sku":"162099","price":2.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/162099.jpg?v=1768343488"},{"product_id":"keilverbinder-connectors","title":"Keilverbinder Connectors","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Keilverbinder Connectors\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Keilverbinder “Keilhülsen” Connectors make it easy to add simple, strong connections between furniture elements. Ideal for\n both furniture and cabinetry, Keilverbinder connectors are invisible and easy to install and remount. When using the Shaper Origin, no additional hardware\n or physical templates are needed to install and use Keilverbinder Connectors besides the\n   \u003ca data-prev-url=\"\/shaper-tool-keilverbinder-dovetail-router-bit.aspx\" href=\"\/products\/shaper-tool-keilverbinder-dovetail-router-bit\"\u003e\n    Keilverbinder Dovetail Router Bit\n   \u003c\/a\u003e\n   .\n Use these Single Connector pins when material space is limited. Cutting templates can be found on ShaperHub’s Hardware Catalog.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli style=\"font-weight:bold;;margin-top:4px;\"\u003e\n    Small\n   \u003c\/li\u003e\n   \u003cul style=\"margin-top:-2px;\"\u003e\n    \u003cli\u003e\n     Material — Hard Plastic\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Length — 9mm (~3\/8\")\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Width — 9mm (~3\/8\")\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Height — 6mm (~1\/4\")\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Geometry — 1 hole for 3mm screw\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cli style=\"font-weight:bold;;margin-top:4px;\"\u003e\n    Long\n   \u003c\/li\u003e\n   \u003cul style=\"margin-top:-2px;\"\u003e\n    \u003cli\u003e\n     Material — Hard Plastic\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Length — 41mm (~1-5\/8\")\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Width — 9mm (~3\/8\")\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Height — 7mm (~1\/4\")\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Geometry — 5 holes for 3mm screw\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Due to Shaper policy, Highland Woodworking cannot ship Shaper products outside the U.S. Any Shaper order that we ship requires a U.S. shipping address.\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\nKeilverbinder Single Connector\n    Makes an invisible joint, leaving clean lines in your finished piece\n    Robust yet easy to disassemble\n    For use with the Keilverbinder Dovetail Router Bit\n    50 pieces per set \n\nKeilverbinder “Keilhülsen” Connectors make it easy to add simple, strong connections between furniture elements. Ideal for\n both furniture and cabinetry, Keilverbinder connectors are invisible and easy to install and remount. Besides the Keilverbinder\n Dovetail Router Bit, no additional hardware or physical templates are needed to install and use Keilverbinder Connectors. Use\n these Single Connector pins when material space is limited. Cutting templates can be found on ShaperHub’s Hardware Catalog.\n\n    Length: 9 mm\n    Width: 9 mm\n    Heigth: 6 mm\n    Geometry: 1 hole for 3 mm screw\n    Material: Hard plastic\n\n---------------------------------------\n\nKeilverbinder Long Connector\n    Makes an invisible connection leaving clean lines in your finished piece\n    Robust yet easy to disassemble\n    Greater stability over the Keilverbinder single connector \n    For use with the Keilverbinder Dovetail Router Bit\n    20 pieces per set\n\nKeilverbinder Connectors make it easy to add simple, strong connections between furniture elements. Ideal for both new furniture\n production and furniture remodeling, Keilverbinder connectors are invisible and easy to install and remount. Besides the Keilverbinder\n Dovetail Router Bit, no additional hardware or physical templates are needed to install and use Keilverbinder Connectors. Use these\n Long Connectors for added stability and strength over the Keilverbinder Single Connector. Cutting templates can be found on\n ShaperHub’s Hardware Catalog. \n\n    Length: 41 mm\n    Width: 9 mm\n    Heigth: 7 mm\n    Geometry: 5 holes for screws with diameter 3mm, no centering mandrel, thus freely positionable\n    Material: Hard plastic\n--\u003e\n \n\u003c\/body\u003e","brand":"Shaper Tools","offers":[{"title":"Small - Pack of 50","offer_id":50822123127066,"sku":"306265","price":32.0,"currency_code":"USD","in_stock":true},{"title":"Long - Pack of 20","offer_id":50822123159834,"sku":"306264","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/keilverbinder-connectors-01d.jpg?v=1768343664"},{"product_id":"shaper-brass-barbells","title":"Shaper Brass Barbell Connectors - Pack of 5","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Shaper Brass Barbell Connectors - Pack of 5\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Shaper barbell inlays add style to your solid-wood projects while preventing the spread of checks or long cracks. Free, ready-to-cut templates for this\n product are available on the ShaperHub Hardware Catalog. Install inlays after finishing, using a small amount of two-part epoxy to lock it in place.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    Material — H59 Brass\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Length — 2\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Thickness — .24\"\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Due to Shaper policy, Highland Woodworking cannot ship Shaper products outside the U.S. Any Shaper order that we ship requires a U.S. shipping address.\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\nBrass Barbells\n    Helps prevent the spread of checks in your projects\n    Made of strong and durable solid H59 brass\n    Polished on one side to a mirror finish\n    Pack includes five barbells\n\nShaper barbell inlays add style to your solid-wood projects while preventing the spread of checks or long cracks. Free, ready-to-cut templates for this\n product are available on the ShaperHub Hardware Catalog. Install inlays after finishing, using a small amount of two-part epoxy to lock it in place.\n\n    Length: 2\"\n\n    Thickness: .24\"\n--\u003e\n \n\u003c\/body\u003e","brand":"Shaper Tools","offers":[{"title":"Default Title","offer_id":50822124077338,"sku":"306263","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/306263-01d.jpg?v=1768343672"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/collections\/WoodworkingHardwaredrawing.jpg?v=1774112580","url":"https:\/\/www.highlandwoodworking.com\/collections\/woodworking-hardware.oembed","provider":"Highland Woodworking","version":"1.0","type":"link"}