{"title":"Workbenches \u0026 Hardware","description":"\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e At the heart of every woodworking shop is a solid, flat, sturdy workbench. We offer several fine workbenches in numerous sizes to suit every shop, whether your workshop is tucked into the garage corner, is a converted basement, or is a free standing building with no size restraints. Browse our workbenches from Hofmann and Hammer, Sjobergs and Ramia.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eIf you want to build your own workbench, we have plans from BenchCrafted as well as their superb Vises, clever Swing Away Seat, and well made workbench hardware.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eWe also offer a large selection of workbench accessories including workbench casters to give your workbench mobility, and a variety of dogs, vises, and holdfasts from Veritas, Narex, and Kreg among others.\u003c\/div\u003e","products":[{"product_id":"hofmann-hammer-german-workbench-large","title":"Hofmann \u0026 Hammer Premium German Workbench - Large","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   \u003ca class=\"egl-button\" data-prev-url=\"\/\/www.highlandwoodworking.com\/freight-cost-estimator.aspx?bump=100\u0026amp;sku=114103\u0026amp;freightClass=125\u0026amp;weight=350\u0026amp;desc=Hofmann+and+Hammer+Premium+German+Workbench+-+Large\" href=\"\/pages\/custom-freight-cost-estimator?bump=100\u0026amp;sku=114103\u0026amp;freightClass=125\u0026amp;weight=350\u0026amp;desc=Hofmann+and+Hammer+Premium+German+Workbench+-+Large\" target=\"_blank\"\u003e\n    Estimate Freight Charges\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003c!--114103, class 125, weight 350, $100 Bump due to extreme length--\u003e\n  \u003cp\u003e\n   The workmanship that goes into this fine woodworking workbench is simply outstanding.  Joints are as perfect as most of us usually just wish for;\n solid beech stock is straight, clear and beautifully finished.  This largest H\u0026amp;H model comes complete, ready for assembly.  (Bolt the stretchers to\n the legs, then lay on the top - you're done!)  It has a shoulder vise with wooden jaw mounted flush with the left end of the bench, a traditional tail\n vise with square dog holes in the moving jaw, vise handles, and pair of square-style\n   \u003ca data-prev-url=\"\/steelbenchdogspair-5-12.aspx\" href=\"\/products\/steelbenchdogspair-5-12\"\u003e\n    9\" steel bench dogs\n   \u003c\/a\u003e\n   .\n A full-length tool well with clean-out ramps runs along the rear of the work surface, and there's a drawer mounted just under the top as well.\n  \u003c\/p\u003e\n  \u003c!--\u003cp\u003e\u003cb\u003eThe large Hofmann \u0026amp; Hammer woodworking workbench\u003c\/b\u003e measures 85\" long by 25-1\/2\" wide, with the front edge fully 4-1\/4\" thick. The work\n surface is 2-1\/4\" thick. It weighs 286 lbs, enough mass to keep it stationary through the most vigorous work.  Height is 34-1\/2\". The shoulder vise\n is 19-3\/4\" wide, with a maximum opening of 9-1\/4\".  The powerful tail vise offers 10-1\/4\" maximum opening, with 6-1\/4\" x 4-1\/4\" unobstructed jaw faces.\n Four dog holes along the vise let you control stock up to 90\" long on the benchtop.\u003c\/p\u003e--\u003e\n  \u003ch5\u003e\n   Specifications\n   \u003cspan style=\"font-size:.8em;font-weight:normal;color:#000000;\"\u003e\n    (Metric measurements are precise manufacturers specs, inch measurements are approximate.)\n    \u003cspan\u003e\n    \u003c\/span\u003e\n   \u003c\/span\u003e\n  \u003c\/h5\u003e\n  \u003cul style=\"margin:-1px 0px 0px 0px\"\u003e\n   \u003cli\u003e\n    Table Size — 25-3\/8\" x 84-5\/8\" (645mm x 2150mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Table Size including vise overhang — 32-1\/2\" x 94-1\/2\"  (825mm x 2400mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Table Top Thickness — 2-1\/4\"  (55mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Table Skirt Thickness — 4-1\/4\" (108mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Table Height — 34-1\/4\"  (870mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Front Vise Width — 19-11\/16\" (500mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Front Vise Opening — 9\"  (230mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Tail Vise Overall Size — 9-7\/16\" x 24-7\/16\" (240mm x 620mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Tail Vise Length — 24-7\/16\"  (620mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Tail Vise Overhang — 3-3\/8\"  (85mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Tail Vise Travel — 9-5\/8\"  (245mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight — 287lbs (130kg)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Bench Material — European Beech\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Finish — cold-pressed rapeseed oil\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cbr\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n  \u003cp\u003e   \u003ca data-prev-url=\"library\/manuals\/hofmann hammer assembly.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/hofmann%20hammer%20assembly.pdf\"\u003e\n    Workbench Assembly Instructions\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Hofmann \u0026 Hammer Workbenches","offers":[{"title":"Default Title","offer_id":50821524324634,"sku":"114103","price":1999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/114103d.jpg?v=1768340276"},{"product_id":"veritascarversvisesparefaceplateandrod","title":"Veritas Carver's Vise Spare Faceplate and Rod","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Carver's Vise Spare Faceplate and Rod\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This spare faceplate and mounting rod for the Veritas Carver's Vise lets you quickly change out work-pieces.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 3-1\/2\" diameter mounting plate is 1\/2\" thick with three screw slots.  It is attached to a 5\/8\" diameter steel rod that gives you  3\" of height adjustment capability when used with the Veritas Carver's vise.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821548736794,"sku":"127006","price":41.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/127004_7e132342-34c4-46b1-ac10-7944621fe978.jpg?v=1751676634"},{"product_id":"wooden-vise-handle","title":"Wooden Vise Handle","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Wooden Vise Handle\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   12\" long hardwood handle has removable wooden end knobs that are secured to the dowel with countersunk wood screws.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Select handle diameter to match your vise.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"1 inch","offer_id":50821554438426,"sku":"114145","price":15.0,"currency_code":"USD","in_stock":true},{"title":"7\/8 inch","offer_id":50821554471194,"sku":"114156","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/114145.jpg?v=1751676763"},{"product_id":"veritaslargeshouldervise","title":"Veritas Large Front Vise","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Large Front Vise\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This sturdy, large capacity front vise is perfectly suited to serve as a primary vise on the front of a work bench or may be installed on the end of a bench, where it can be used as a dog vise.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   A robust 1-1\/8\" diameter Acme lead main screw and twin guide rods allow for efficient travel and limit vise racking.  This vise gives 13\" of clamping capacity (minus the thickness of your wooden jaws).  The offset center screw design provides more clearance for clamping pieces vertically, with reduced skewing.  Includes two support collars for the guide rods to use in some installation configurations as needed.  Casting diameter for a handle is 1\".  (Handle NOT included.)  Includes screws for installation.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This style of vise is a good choice for new bench builds, as well as retrofits and is quite versatile for mounting onto a range of styles of workbenches, allowing for different mounting configurations.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-3px;\"\u003e\n   \u003cli\u003e\n    Screw Diameter — 1-1\/8\"\n    \u003c!--1-3\/32\u0026quot; measured--\u003e\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Screw Thread — 5-1\/2 threads per inch\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Maximum Screw Travel — 11-3\/4\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Guide Rod Diameter — 25-32\"\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Overall Length — 21\"\n    \u003c!--21-1\/2\u0026quot; measured--\u003e\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Width — 10-1\/2\"\n   \u003c\/li\u003e\n   \u003c!--\u003cli\u003eUnder Bench Mounting Plate \u0026mdash; 9-5\/8\u0026quot; x 4-3\/8\u0026quot;\u003c\/li\u003e--\u003e\n   \u003c!--\u003cli\u003eFront Mounting Plate \u0026mdash; 10-1\/2\u0026quot; x 2-1\/2\u0026quot;\u003c\/li\u003e--\u003e\n   \u003cli\u003e\n    Handle Casting Internal Diameter – 1\".\n    \u003cem\u003e\n     Handle Not included.\n    \u003c\/em\u003e\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight — 18.8lbs\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   Includes\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-3px;\"\u003e\n   \u003cli\u003e\n    Vise\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Guide Rod Support Collars - 2\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Mounting screws and washers\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Instructions\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Handle Not Included\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Made in the Czech Republic.\n  \u003c\/p\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n  \u003ch3 style=\"background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/veritas\/veritas-front-vise-instructions.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/veritas\/veritas-front-vise-instructions.pdf\"\u003e\n    Veritas Large Front Vise Instructions\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\n\nVeritas\nCast iron and steel components\n\tMachined double guide rods and single-lead Acme screws\n\tLarge front vise is 10-1\/2\" x 21\" overall with a 1-1\/8\" dia. screw and 13\" clamping capacity (less the thickness of your wooden jaws)\n\tLarger vise has offset center screw to prevent skewing\n\tCan be added to an existing bench or built into a new one\n\tMounting screws included\n\nleevalley\nThese vises have rugged, machined, double guide rods and single-lead Acme screws. Our large front vise is 10 1\/2\" × 21\" overall with a 1 1\/8\" dia.\n screw, and 13\" clamping capacity (less the thickness of your wooden jaws). The larger vise has an offset center screw to allow vertical clamping without skewing.\n\nCan be added to an existing bench or built into a new one.\n\nMounting screws included. \n--\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821554569498,"sku":"146204","price":156.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/146204d.jpg?v=1768340408"},{"product_id":"veritastwin-screwvise","title":"Veritas Twin-Screw Vise","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Twin-Screw Vise\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This vise's chain drive system ensures that the jaws stay parallel, eliminating the racking common in other vises.  It operates from either side, and a spring loaded lock pin disengages the chain for controlled skewing to equalize pressure on slightly out-of-square work.  This vise is an easy retrofit to an existing bench, requiring only an end cap drilled for the vise nut \u0026amp; fixing bolts, plus the vise jaw itself.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The vise is set for a standard screw spacing of 16-7\/8\" on center, but you can place the screws closer together by cutting down the chain cover and removing links from the chain. (If you prefer wider screw spacing, you'll need to add the\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/veritastwinscrewviseextensionkit.aspx\" href=\"\/products\/veritastwinscrewviseextensionkit\"\u003e\n    Extension Kit\n   \u003c\/a\u003e\n   . It allows screw spacing up to 24\".)\n   \u003c!--A chain cover lets you set the spindles from 11\" to 20\" apart.  Enough chain is included for 16\" spacing, adequate for benches up to 32\" wide.--\u003e\n   Two vise screws with handles \u0026amp; speed cranks, nuts, chain cover \u0026amp; installation hardware are included with instructions. Maximum jaw opening is 12\". Wooden jaw liners are not included.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   For calculating end clearance for bench legs, the full length of vise screws, including rear spindle nut and front tee is 21-1\/4\"  (540 mm).\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821554635034,"sku":"417021","price":309.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/017021.jpg?v=1751676768"},{"product_id":"veritaswonderdog","title":"Veritas Wonder Dog","description":"\u003cp\u003e\u003cb\u003e Veritas Wonder Dog \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eVeritas Wonder Dogs are wonderfully useful accessories for any bench. Wonder Dogs mount in 3\/4\" drilled holes to provide the moving half of a standard bench dog system without the need for a tail vise, so (together with Veritas Round Bench Dogs) they're perfect for retro-fitting into heavy benches built without dogs. They can also be used in multi-directional, multi-dog holding systems (they pivot in any direction), shop-built wooden clamps, and custom holding or shaping jigs. Dog post is 4-3\/8\" high. A steel spring wire keeps it from slipping. The screw angles downward 2\" for secure grip. The brass clamp face is 3\/4\" high; the post stands a minimum of 7\/8\" above the bench.\u003c\/p\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821554700570,"sku":"417004","price":47.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/017004.jpg?v=1751676771"},{"product_id":"veritaswonderpup","title":"Veritas Wonder Pup","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Wonder Pup\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Wonder Pups are wonderfully useful stock control devices made especially for benchtops 2\" thick or less. They mount in 3\/4\" drilled holes to provide the moving half of a standard bench dog system without the need for a tail vise, so (together with Veritas Round Bench Pups, #419715) they're perfect for retro-fitting into benches built without dogs.  They can also be used in multi-directional, multi-dog holding systems (they pivot in any direction), shop-built wooden clamps, and holding or shaping jigs.  The post is 2-5\/8\" long.  A steel spring wire keeps it from slipping even in 1-1\/2\" thick tops.  The screw angles downward 2\" for secure grip.  The brass clamp face is 3\/4\" high; the post stands 7\/8\" minimum above the bench.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821554798874,"sku":"417007","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/017007.jpg?v=1751676773"},{"product_id":"veritasroundbenchdogspair","title":"Veritas Round Bench Dogs - Pair","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Veritas' simple but functional design makes these dogs very easy to build in or retrofit into any bench.  Boring a simple 3\/4\" hole vertically through the bench surface is the only installation work required.  Dogs are 4-3\/8\" long, with friction springs to make them usable in any benchtop thickness. 5° undercut face grips securely, and can be rotated as needed to hold stock that isn't square.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821554897178,"sku":"419714","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/419714.jpg?v=1751676776"},{"product_id":"veritasbenchpupspair","title":"Veritas Bench Pups - Pair","description":"\u003cbody\u003e\n  \u003cp\u003e\n   Veritas' simple but functional design makes these dogs very easy to build in or retrofit into any bench.  \nBoring a simple 3\/4 inch hole vertically through the bench surface is the only installation work required.  \nPups are 2-3\/8 inches long (shown on the right in the picture), with friction springs to make them usable in \nany benchtop 2 inches thick or less. 5° undercut face grips securely, and can be rotated as needed to \nhold stock that isn't square.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821554995482,"sku":"419715","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/419715d.jpg?v=1768340410"},{"product_id":"veritasbenchholddown","title":"Veritas Bench Hold Down","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Bench Hold Down\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Mounts wherever you drill a 3\/4\" hole in your bench top, or in the bench leg—where the hold-down becomes a panel clamp as well.  Clamp screw with polished brass hex knob applies very high clamping force to secure carvings or other workpieces.  Throat capacity and maximum height is 8\".\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/woodworking-tips-1407jul\/veritas-bench-hold-down-tool-review.html\" href=\"https:\/\/info.highlandwoodworking.com\/woodworking-tips-1407jul\/veritas-bench-hold-down-tool-review.html\" target=\"_blank\"\u003e\n    CLICK HERE\n   \u003c\/a\u003e\n   to read Jeff Fleisher's tool review of the Veritas Bench Hold Down.\n  \u003c\/p\u003e\n  \u003cbr\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821555388698,"sku":"417005","price":134.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/417005d.jpg?v=1768340410"},{"product_id":"steelbenchdogspair-5-12","title":"Hofmann \u0026 Hammer Steel Bench Dogs - Pair","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Steel Bench Dogs - Pair\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   These traditional rectangular steel bench dogs by Hoffman \u0026amp; Hammer are ideal for use in your small to medium-size bench.\n  They feature a smooth face\/ dimpled for traction and polished to minimize marking your stock. A heavy spring holds them securely\n at any height 1\/16 inch or more above the bench surface.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The\n   \u003cb\u003e\n    small dogs\n   \u003c\/b\u003e\n   have 5\/8\" x 1\" heads; they are 5-1\/2\" long. These are the standard dogs on our\n   \u003ca data-prev-url=\"\/hofmann-hammer-german-workbench-compact.aspx\" href=\"\/products\/hofmann-hammer-german-workbench-compact\"\u003e\n    compact\n   \u003c\/a\u003e\n   and\n   \u003ca data-prev-url=\"\/hofmann-hammer-german-workbench-medium.aspx\" href=\"\/products\/hofmann-hammer-german-workbench-medium\"\u003e\n    medium\n   \u003c\/a\u003e\n   Hofmann \u0026amp; Hammer workbenches.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The\n   \u003cb\u003e\n    large dogs\n   \u003c\/b\u003e\n   have 3\/4\" x 1-3\/8\" heads and are 9\" long. These are the standard dogs on our\n   \u003ca data-prev-url=\"\/hofmann-hammer-german-workbench-large.aspx\" href=\"\/products\/hofmann-hammer-german-workbench-large\"\u003e\n    large Hofmann \u0026amp; Hammer workbench\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Hofmann \u0026 Hammer Workbenches","offers":[{"title":"5-1\/2 inch","offer_id":50821555487002,"sku":"114141","price":63.0,"currency_code":"USD","in_stock":true},{"title":"9 inch","offer_id":50821555519770,"sku":"114143","price":84.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/114141.jpg?v=1751676783"},{"product_id":"veritastwinscrewviseextensionkit","title":"Veritas Twin-Screw Vise Extension Kit","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Twin-Screw Vise Extension Kit\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Twin Screw Vise Extension Kit increases the maximum screw spacing of\n the\n   \u003ca data-prev-url=\"\/veritastwin-screwvise.aspx\" href=\"\/products\/veritastwin-screwvise\"\u003e\n    Twin-Screw Vise\n   \u003c\/a\u003e\n   from 16-7\/8\" to 24\" on center.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This kit only fits Twin-Screw Vises made after 2001.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821649170714,"sku":"417022","price":46.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/017022.jpg?v=1751678509"},{"product_id":"setof4benchboltsandnuts","title":"Set of 4 Bench Bolts \u0026 Nuts","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Set of 4 Bench Bolts \u0026amp; Nuts\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Heavy-duty knock-down hardware suitable for assembling a workbench base or\nother large, hard-use furniture. Bolts are 1\/2\" x 6\" hex heads; brass dowel nuts are 25mm x 25mm (.984\") and fit 1\" hole.\n   \u003cb\u003e\n    Please note that the threading on this item is non-standard, and will NOT mate with 1\/2\" x 13 tpi hardware.\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"Default Title","offer_id":50821649269018,"sku":"168045","price":29.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/168045.jpg?v=1751678512"},{"product_id":"veritassurfaceclamp","title":"Veritas Surface Clamp","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Surface Clamp\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Veritas Surface Clamps are small bench hold-downs, just the thing for holding the loose end of a long board to a bench skirt or a board jack.\n They'll fit anywhere you can drill a 3\/4\" hole. Works in a minimum 1-3\/8\" deep blind hole or a through hole as thin as 5\/8\", depending on the material strength.  Once in the hole, a turn of a knob wedges the post in tight.  Their compact size makes them ideal for use on\n drill press auxiliary tables and sliding table saw jigs.  Made from steel, brass and aluminum.  Maximum opening is 3-3\/4\" thick with a throat depth\n of 2-1\/8\".\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821676040474,"sku":"177045","price":89.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/177045.jpg?v=1751679038"},{"product_id":"largeshouldervise","title":"Large Shoulder Vise","description":"\u003cp\u003eCan be used as either a front vise or an end vise. Heavy duty steel guide rods ensure stable action.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eScrew Diameter — 1-1\/8\"\u003c\/li\u003e\n\u003cli\u003eScrew Thread — 3-1\/2 threads per inch\u003c\/li\u003e\n\u003cli\u003eMaximum Screw Travel — 13\"\u003c\/li\u003e\n\u003cli\u003eGuide Rod Diameter — 25\/32\"\u003c\/li\u003e\n\u003cli\u003eOverall Length — 21\"\u003c\/li\u003e\n\u003cli\u003eWidth — 10-1\/4\"\u003c\/li\u003e\n\u003cli\u003eMaximum Clamping Capacity — 13-1\/2\" (less the thickness of your wooden jaw)\u003c\/li\u003e\n\u003cli\u003eHandle Casting Internal Diameter – 1\". \u003cem\u003e Handle Not included. \u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight — 18.4 lbs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eIncludes\u003c\/h5\u003e\n\u003cul style=\"margin-top: -3px;\"\u003e\n\u003cli\u003eVise\u003c\/li\u003e\n\u003cli\u003eGuide Rod Support Collars - 2\u003c\/li\u003e\n\u003cli\u003eHandle Not Included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMade in China\u003c\/p\u003e","brand":"HHI","offers":[{"title":"Default Title","offer_id":50821752848666,"sku":"169132","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/169132.jpg?v=1751682489"},{"product_id":"new-hofmann-hammer-all-round-workbench","title":"Hofmann \u0026 Hammer All-Round Workbench","description":"\u003cp\u003e\u003ca name=\"truck\" href=\"\/pages\/custom-freight-cost-estimator?sku=114146\u0026amp;freightClass=110\u0026amp;weight=265\u0026amp;desc=Hofmann+and+Hammer+All-Round+Workbench\" data-prev-url=\"\/freight-cost-estimator.aspx?sku=114146\u0026amp;freightClass=110\u0026amp;weight=265\u0026amp;desc=Hofmann+and+Hammer+All-Round+Workbench\" class=\"egl-button\" target=\"_blank\"\u003eFreight Calculator\u003c\/a\u003e\u003c\/p\u003e\n\n\u003c!--114146, class 110, weight 265--\u003e\n\n\u003cp\u003eThis newest addition to our fine family of Hofmann \u0026amp; Hammer German Woodworking Benches has an \"American\" style top that provides a larger contiguous area to support your work compared to a European-style top with a recessed tool well. 3\/4\" round dog holes are strategically located to afford you multiple options of positioning \u0026amp; holding your work using round bench dogs (sold separately).\u003c\/p\u003e\n\u003cp\u003eOn the top front edge of the bench, with the end-dog vise fully extended, you get an impressive 76\" of capacity between bench dogs. Twin dog holes set apart 13-3\/4\" traverse across the width of the bench and provide 29\" of double-dog holding capacity with the front vise fully open. Full sized doors and tall panels can be dogged securely utilizing the dog holes located in the vertical face of the front apron.\u003c\/p\u003e\n\u003cp\u003eThe All-Round is made from solid European beech and measures 71\" long x 23-5\/8\" wide x 34\" high. The top is 2\" thick and has a 4\" wide apron. Footprint of the base is 51\" x 24-1\/2\". Weight is 220 lb. \u003cspan style=\"font-weight: bold;\"\u003e Bench dogs are sold separately. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eSpecifications \u003cspan style=\"font-size: .8em; font-weight: normal; color: #000000;\"\u003e (Metric measurements are precise manufacturers specs, inch measurements are approximate.) \u003cspan\u003e \u003c\/span\u003e \u003c\/span\u003e\n\u003c\/h5\u003e\n\u003cul style=\"margin: -1px 0px 0px 0px;\"\u003e\n\u003cli\u003eTable Size — 23-5\/8\" x 70-7\/8\" (600 mm x 1800 mm)\u003c\/li\u003e\n\u003cli\u003eTable Size including vise overhang — 31-1\/16\" x 80-11\/16\" (790 mm x 2015 mm)\u003c\/li\u003e\n\u003cli\u003eTable Top Thickness — 1-15\/16\" (50 mm)\u003c\/li\u003e\n\u003cli\u003eTable Skirt Thickness — 3-15-16\" (100 mm)\u003c\/li\u003e\n\u003cli\u003eTable Height — 34-1\/4\" (870 mm)\u003c\/li\u003e\n\u003cli\u003eFront Vise Width — 19-1\/2\" (495 mm)\u003c\/li\u003e\n\u003cli\u003eFront Vise Opening — 7-3\/4\" (195 mm)\u003c\/li\u003e\n\u003cli\u003eTail Vise Overall Size — 9-7\/16\" x 24-7\/16\" (240 mm x 620 mm)\u003c\/li\u003e\n\u003cli\u003eTail Vise Length — 20-1\/16\" (510 mm)\u003c\/li\u003e\n\u003cli\u003eTail Vise Overhang — 1-5\/8\" (40 mm)\u003c\/li\u003e\n\u003cli\u003eTail Vise Travel — 8-13\/16 \" (225 mm)\u003c\/li\u003e\n\u003c!--ESTIMATE - Verify when display model is fixed--\u003e\n\u003cli\u003eWeight — 220 lb (100 kg)\u003c\/li\u003e\n\u003cli\u003eBench Material — European Beech\u003c\/li\u003e\n\u003cli\u003eFinish — cold-pressed rapeseed oil\u003c\/li\u003e\n\u003cli\u003eBench dogs are NOT included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5 style=\"background: #D6CBB5; padding: 2px 4px;\"\u003eAdditional Information\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/hofmann%20hammer%20assembly.pdf\" data-prev-url=\"library\/manuals\/hofmann hammer assembly.pdf\"\u003e Workbench Assembly Instructions \u003c\/a\u003e\u003c\/p\u003e\n","brand":"Hofmann \u0026 Hammer Workbenches","offers":[{"title":"Default Title","offer_id":50821781029146,"sku":"114146","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/114146.png?v=1760292887"},{"product_id":"roundaluminumbenchdogspair","title":"Round Aluminum Bench Dogs - Pair","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Round Aluminum Bench Dogs - Pair\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Their simple but functional design makes these dogs very easy to build in or retrofit into any bench.  Boring a simple 3\/4\" hole vertically through the bench surface is the only installation work required.  Dogs are 4-3\/8\" long, with friction springs to make them usable in any benchtop thickness. Dogs can be rotated as needed to hold stock that isn't square.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   These dogs fit the dog holes on the wooden vise jaws on our European 53 Beechwood Workbench.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"Default Title","offer_id":50821798658330,"sku":"169134","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/169134d.jpg?v=1768341284"},{"product_id":"roundaluminumshortbenchdogspair","title":"Round Aluminum Short Bench Dogs - Pair","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Round Aluminum Short Bench Dogs - Pair\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Their simple but functional design makes these dogs very easy to build in or retrofit into any bench.\n Boring a simple 3\/4\" hole vertically through the bench surface is the only installation work required.  Dogs are 2-3\/8\" long,\n with friction springs to make them usable in any benchtop thickness. Dogs can be rotated as needed to hold stock that isn't square.\n  \u003c\/p\u003e\n  \u003c!--\u003cp\u003eThese dogs fit the dog holes on the bench top on our European 53 Beechwood Workbench.\u003c\/p\u003e--\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"Default Title","offer_id":50821798723866,"sku":"169135","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/169135d.jpg?v=1768341284"},{"product_id":"roundaluminumbenchdogssetof4","title":"Round Aluminum Bench Dogs - Set of Four","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Round Aluminum Bench Dogs - Set of Four\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Their simple but functional design makes these dogs very easy to build in or retrofit into any bench.\n Boring a simple 3\/4\" hole vertically through the bench surface is the only installation work required.\n Dogs are 2-3\/8\" and 4-3\/8\" long, with friction springs to make them usable in any benchtop thickness.\n Dogs can be rotated as needed to hold stock that isn't square.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   These dogs fit the dog holes on the\n bench top and the wooden vise jaws of our European 53\" Beechwood Workbench.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"Default Title","offer_id":50821798789402,"sku":"169136","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/169136d.jpg?v=1768341288"},{"product_id":"european-workbench","title":"Ramia Advanced 1500 Workbench - 53 inch","description":"\u003ch6\u003e\u003cb\u003e Approach your woodworking projects like never before with our affordable Ramia Advanced 1500 Workbench \u003c\/b\u003e\u003c\/h6\u003e\n\u003cp\u003eA well-made workbench is essential for any woodworker who wants to succeed using traditional hand tools. The benchtop needs to be flat and strong and supported by a sturdy base, and should be equipped to securely hold a variety of shapes and sizes of workpieces.\u003c\/p\u003e\n\u003cp\u003eThis workbench features an ample-sized top made of solid European beech, yet still occupies a compact footprint in your shop. The work top area measures 52-3\/4\" long x 19-11\/16\" wide, and the top thickness is 1-3\/16\" with a 3-1\/2\" high border apron all the way around. A double row of round dog holes runs along the bench's length to work with the tail vise as well as with the front vise. Dog holes on the front legs allow for extended support of awkward workpieces. Solid beech is laminated together in both length and width to craft the sturdy component parts of the bench.\u003c\/p\u003e\n\u003cp\u003eWooden jawed shoulder vises are 14-3\/16\" wide and have steel guide rods for rigidity. Bench comes complete with 4 round bench dogs and a convenient tool storage shelf that sits on top of the stretchers.\u003c\/p\u003e\n\u003cp\u003eThe workbench is manufactured by Ramia in the Czech Republic, and we are very impressed with its overall fit and finish. We believe it will help to inspire you and enable safe, quality woodworking in your workshop. Bench height is 33-7\/16\". Total weight is 104 lb.\u003c\/p\u003e\n\u003cp\u003ePLEASE NOTE: The included heavy duty bench dogs are NOT the style that recess below the bench top. When fully seated, the heads of the bench dogs sit 1\" above the bench top. If you need bench dogs to be set lower than 1\" above the bench top and\/or need them to recess below the bench top, see the optional bench dogs listed below. Consider getting a pair of the 4-3\/8\" long dogs for use in the vise jaws and a pair of the 2-3\/8\" dogs for the holes in the bench top.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cp\u003e(Metric measurements are precise manufacturers specs, inch measurements are approximate.)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTable Size – 19-11\/16\" x 52-3\/4\" (500 mm x 1340 mm)\u003c\/li\u003e\n\u003cli\u003eTable Size including vise overhang – 25-9\/16\" x 59-1\/16\" (650 mm x 1500 mm)\u003c\/li\u003e\n\u003cli\u003eTable Top Thickness – 1-3\/16\" (30 mm)\u003c\/li\u003e\n\u003cli\u003eTable Skirt Thickness – 3-1\/2\" (90 mm)\u003c\/li\u003e\n\u003cli\u003eTable Height – 33-7\/16\" (850 mm)\u003c\/li\u003e\n\u003cli\u003eFront Vise Width – 14-3\/16\" (360 mm)\u003c\/li\u003e\n\u003cli\u003eFront Vise Opening – 6-1\/8\" (155 mm)\u003c\/li\u003e\n\u003cli\u003eEnd Vise Width – 14-3\/16\" (360 mm)\u003c\/li\u003e\n\u003cli\u003eEnd Vise Opening – 6-1\/8\" (155 mm) \u003c\/li\u003e\n\u003cli\u003eDog Hole Diameter – 49\/64\" (19.5 mm) — sized to fit 3\/4\" (19 mm) dogs\u003c\/li\u003e\n\u003cli\u003eWeight – 104 lb (47 kg)\u003c\/li\u003e\n\u003cli\u003eBench Material – European Beech\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-style: italic; margin-top: 15px;\"\u003ePlease Note: This bench was previously listed in our catalog and on our website as the \u003cspan style=\"font-weight: bold;\"\u003eEuropean Workbench\u003c\/span\u003e. It's the same bench, we just updated the name.\u003cbr\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n\u003cp\u003eClick here to download \u003ca href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/114201-workbench-instructions.pdf\" data-prev-url=\"library\/manuals\/114201-workbench-instructions.pdf\"\u003e Assembly Workbench Instructions \u003c\/a\u003e\u003c\/p\u003e","brand":"Ramia Tools","offers":[{"title":"Default Title","offer_id":50821823463706,"sku":"114201","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/ramia1500.jpg?v=1767389659"},{"product_id":"adjust-a-bench-one-rail-bracket-set","title":"Adjust-A-Bench One Rail Bracket Set","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Adjust-A-Bench One Rail Bracket Set\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   One Rail Brackets are constructed of heavy-duty steel and eliminate one bench rail for seated work \nsuch as carving or to allow for extra storage space beneath your Adjust-A-Bench.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Includes 2 One Rail Brackets, Hardware Package, and instructions.\n  \u003c\/p\u003e\n  \u003cbr\u003e\n \n\u003c\/body\u003e","brand":"Noden Furniture Design","offers":[{"title":"Default Title","offer_id":50821838569754,"sku":"114256","price":96.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/114256d.jpg?v=1768341586"},{"product_id":"kreg-bench-dogs-pack-of-4","title":"Kreg Bench Dogs - Pack of 4","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kreg Bench Dogs - Pack of 4\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Kreg Bench dogs are made of 3\/4 inch reinforced nylon and also include a solid rubber bench break with each one. They're great for routing, cutting, and sanding. Feature a Squared Clamping Pad for solid and secure hold and a solid non-slip work surface. Pack of four.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"Default Title","offer_id":50821854462234,"sku":"124368","price":16.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/124368d.jpg?v=1768341713"},{"product_id":"veritas-bench-dog-muzzles","title":"Veritas Muzzles for Bench Dogs or Bench Pups - Pack of 2","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Muzzles for Bench Dogs or Bench Pups - Pack of 2\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Veritas Muzzles allow owners of\n   \u003ca data-prev-url=\"\/veritasroundbenchdogspair.aspx\" href=\"\/products\/veritasroundbenchdogspair\" title=\"Veritas Bench Dogs\"\u003e\n    Veritas Bench Dogs\n   \u003c\/a\u003e\n   and\n   \u003ca data-prev-url=\"\/veritasbenchpupspair.aspx\" href=\"\/products\/veritasbenchpupspair\" title=\"Veritas Bench Pups\"\u003e\n    Veritas Bench Pups\n   \u003c\/a\u003e\n   to cushion the dog's gripping surface so\nthat clamping an already-finished workpiece does not leave a mark at the point where it is gripped. Muzzles slip\neasily over the business end of a Veritas Bench Dog (or Pup). The muzzle's hard, spring-grip, plastic body has six face ribs\nthat grip a workpiece tightly without marring it.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Available in two sizes, the 1-1\/4 inch long muzzles fit Veritas Bench Dogs and the 3\/4 inch long muzzles fit Bench Pups.\nComes as a pack of two of one of the sizes.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Bench Dog Muzzles","offer_id":50821862064410,"sku":"177081","price":3.5,"currency_code":"USD","in_stock":true},{"title":"Bench Pup Muzzles","offer_id":50821862097178,"sku":"177082","price":3.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/benchdogmuzzles.jpg?v=1751684875"},{"product_id":"veritas-bench-hold-down-post-5-1-2in","title":"Veritas Bench Hold Down Post - 5-1\/2 inch","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Bench Hold Down Post - 5-1\/2 inch\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This optional accessory for the\n   \u003ca data-prev-url=\"\/veritasbenchholddown.aspx\" href=\"\/products\/veritasbenchholddown\" title=\"Veritas Bench Hold Down\"\u003e\n    Veritas Bench Hold Down\n   \u003c\/a\u003e\n   (Hold Down unit is sold separately) can be retrofitted to allow the Hold Down to be used in a bench hole \nwhere the 8\" post that comes standard with the Hold Down is too long because the hole's through-travel depth is too limited. \nAt 5-1\/2\" long, the shorter post provides about 4\" of clamping capacity.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821862883610,"sku":"177083","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/177083.jpg?v=1751684884"},{"product_id":"benchcrafted-tail-vise","title":"Benchcrafted Tail Vise","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Benchcrafted Tail Vise\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Benchcrafted Tail Vise is the original flagship of the award-winning Benchcrafted line of workbench hardware. Besides being extremely robust with absolutely precise machining, this vise's real claim to fame lies in its incredibly smooth and effortless operation. Apply a modest spin to the handle and marvel asthe vise action first accelerates and then slowly coasts to a stop. This is the way every tool should feel in response to a craftsman's touch. This style of tail vise is also referred to as a wagon wheel end vise.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Benchcrafted Tail Vise was first conceived to meet the needs of a Roubo-style workbench with a top at least 4\" thick, though it can also be installed on thinner benchtops and can be retrofitted to an existing bench.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Handwheel\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   Benchcrafted offers three options for the handwheel of the Tail Vise. Both are completely designed and manufactured in the USA.\n  \u003c\/p\u003e\n  \u003cul style=\"margin:-2px 0px 0px 0px\"\u003e\n   \u003cli\u003e\n    Machined — This handwheel is fully machined and features a black wrinkle coated aluminum knob.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Cast — This handwheel has a retro rough-cast look and features a black wrinkle coated aluminum knob.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Classic — features a 9\" steel sliding handle assembly with a black “Parkerized” finish.\t\t(This one won't spin like the Machined and cast versions.)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003c!--\u003cp style=\"border: 3px solid #660000;border-radius:8px;background-color:#EDE9E2;padding:4px;text-align:center;\"\u003e\u003cspan style=\"font-weight:bold; color:#660000;\"\u003ePLEASE NOTE:\u003c\/span\u003e Benchcrafted is changing from the wooden knobs described above to aluminum knobs with a black wrinkle coating. We'll ship the tail vises equipped with wooden knobs first.\u003c\/p\u003e--\u003e\n  \u003cbr\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin:-2px 0px 0px 0px\"\u003e\n   \u003c!--\u003cli\u003e5\u0026#34; dia. cast-iron hand wheel provides momentum and precise control. Designed, cast and machined in the USA\u003c\/li\u003e--\u003e\n   \u003cli\u003e\n    Rolled carbon-steel acme-threaded 1-1\/4\" dia. screw with 4 tpi pitch strikes a balance between rapid movement \u0026amp; controlled gradual clamping pressure\n   \u003c\/li\u003e\n   \u003cli\u003e\n    1\" thick acme nut milled from solid billet of cold rolled steel\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Reversible sliding plate for both right-hand or left-hand bench installations\n   \u003c\/li\u003e\n   \u003cli\u003e\n    3\/8\" thick cold-rolled steel flange, black finished\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Cold-rolled steel guide rails support the robust sliding plate assembly, which runs in precisely milled grooves\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Crubber jaw liner\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Includes everything you need to install the vise, except wood\n   \u003c\/li\u003e\n   \u003cli\u003e\n    All components designed and made in the USA\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   We offer a\n   \u003ca data-prev-url=\"\/spax-lag-screws-benchcrafted-tail-vise.aspx\" href=\"\/products\/spax-lag-screws-benchcrafted-tail-vise\"\u003e\n    Set of five Spax Lag Screws\n   \u003c\/a\u003e\n   for installation of the Tail Vise End Cap. These are the screws recommended by Spax for this purpose. (See pages 8-10 of the installation instructions below.) We strongly recommend them for this application.\n  \u003c\/p\u003e\n  \u003cbr\u003e\n  \u003cbr\u003e\n  \u003ch3 style=\" background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/BC_TailVise_Feb2016.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/BC_TailVise_Feb2016.pdf\" target=\"_blank\"\u003e\n    Cast \u0026amp; Machined Tail Vise installation instructions.\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Tail-Vise-Classic_Instructions-Oct18.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Tail-Vise-Classic_Instructions-Oct18.pdf\" target=\"_blank\"\u003e\n    Classic Tail Vise installation instructions.\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Benchcrafted","offers":[{"title":"Machined","offer_id":50821862949146,"sku":"135171","price":459.0,"currency_code":"USD","in_stock":true},{"title":"Cast","offer_id":50821862981914,"sku":"135241","price":379.0,"currency_code":"USD","in_stock":true},{"title":"Classic","offer_id":50821863014682,"sku":"135253","price":317.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/benchcrafted-tail-vise-main-02d.jpg?v=1768341771"},{"product_id":"benchcrafted-moxon-vise","title":"Benchcrafted Moxon Vise Hardware","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Benchcrafted Moxon Vise Hardware\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Benchcrafted Moxon vise is designed to clamp to any workbench as a way of holding\nworkpieces at the ideal height for sawing dovetails and other joints in the end of a\nworkpiece. We offer the Benchcrafted hardware with which you can build your own Moxon vise\nby adding the vise jaws and means of attachment to your bench from wood that you provide.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Benchcrafted Moxon vise uses the same precision rolled acme screws as Benchcrafted's\nfamous Tail Vise and Glide Leg Vise. As on those vises, the mass of the cast iron hand\nwheels combined with the bench screws' polished acme threads allow the hand wheels to spin freely,\ndrawing the jaws together effortlessly for rapid, easy adjustment.\nThe hardware is manufactured entirely in the USA.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Benchcrafted hardware consists of two 5\" cast iron hand wheels tapped for 3\/4\" x 8\ntpi, two 8\" precision rolled carbon steel acme screws, four 3\/4\" x 8 tpi nuts, and a piece\nof\n   \u003c!--suede leather--\u003e\n   crubber (rubberized cork) to mount on the inside of the movable jaw for an absolutely firm grip.\n  \u003c\/p\u003e\n  \u003cp\u003e\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Kit Contents\n  \u003c\/h5\u003e\n  \u003cul style=\"margin:-3px 0px 0px 0px;\"\u003e\n   \u003cli\u003e\n    Two Cast Iron Handwheels\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Two 8\" carbon steel acme-threaded screws\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Four 3\/4\" x 8 tpi nuts\n   \u003c\/li\u003e\n   \u003cli\u003e\n    One piece of crubber (rubberized cork)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    \u003ci\u003e\n     Please Note: Instructions are NOT included, but can be downloaded below.\n    \u003c\/i\u003e\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003c!--\n\u003cp style=\"border: solid 3px #D6CBB5;padding:5px;text-align:center;font-style:italic;font-size:.95em:\"\u003e\u003cspan style=\"font-weight:bold;\"\u003ePlease Note:\u003c\/span\u003e The vise liner\n included with the Benchcrafted Moxon Vise is now made of rubberized cork (crubber), not suede leather as show in the picture\n above and referenced in the instructions. Benchcrafted made this\n \u003ca style=\"font-style:italic;\" href=\"http:\/\/benchcrafted.blogspot.com\/2016\/08\/moxon-vises-now-shipping-with-crubber.html\" target=\"_blank\"\u003echange in September 2016\u003c\/a\u003e\n and suede-equipped vises are no longer available.\u003c\/p\u003e\n--\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n  \u003cbr\u003e\n  \u003ch3 style=\" background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Benchcrafted_Moxon_Vise.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Benchcrafted_Moxon_Vise.pdf\" target=\"_blank\"\u003e\n    Complete illustrated instructions for building your own Moxon vise\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003cp\u003e\n   To learn more, read Jeffrey Fleisher's Tool Review on the\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/woodworking-tips-1507jul\/toolreview\/benchcrafted-moxon-vise-tool-review.html\" href=\"https:\/\/info.highlandwoodworking.com\/woodworking-tips-1507jul\/toolreview\/benchcrafted-moxon-vise-tool-review.html\" target=\"_blank\"\u003e\n    Benchcrafted Moxon Vise Hardware\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Benchcrafted","offers":[{"title":"Default Title","offer_id":50821863112986,"sku":"135174","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/135174d.jpg?v=1768341771"},{"product_id":"benchcrafted-glide-leg-vise","title":"Benchcrafted Glide Leg Vise","description":"\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003eInspired by the 18th century designs of Andre Roubo, this vise hardware lets you plan and create the ultimate front vise for your workbench that will allow you to clamp and hold your stock and projects with exceptional strength.\u003c\/p\u003e\n\u003cp\u003eA leg vise (whose long front jaw pad is called a \"chop\") has several advantages over conventional cast iron vises. Because a leg vise does not need the pair of guide rods required on a Record-style vise, it's possible to clamp a workpiece right up against the screw and thus virtually eliminate racking. Leg vises also allow about 9\" of workable depth, more than twice the space typical of iron face vises, plus the mechanical advantage inherent in a leg vise's geometry provides a more powerful overall grip.\u003c\/p\u003e\n\u003cp\u003eBenchcrafted's exquisitely smooth action of their double-lead, acme screw with a 4 tpi pitch, gives this vise hardware a highly efficient 1\/2\" of travel per revolution of the hand wheel.\u003c\/p\u003e\n\u003ch5\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eCrisscross Mechanism \u003c\/strong\u003e\n\u003c\/h5\u003e\n\u003cp\u003eBenchcrafted's Crisscross mechanism makes operation of the Glide Vise even sweeter. The scissor action of the \"St. Peter's Cross\" eliminates the need for a traditional leg vise's parallel guide and adjustment pin, and instead takes advantage of the mass and free spinning action of the hand wheel to provide smooth and unencumbered movement over the vise's entire range.\u003c\/p\u003e\n\u003cp\u003eBenchcrafted Crisscross hardware comes three versions.\u003c\/p\u003e\n\u003cul style=\"margin-top: -3px;\"\u003e\n\u003cli\u003eThe \u003cb\u003e Solo Crisscross \u003c\/b\u003e mechanism is for installation in new bench construction. It is made from cast iron and powder coated in a matte black finish.\u003c\/li\u003e\n\u003cli\u003eThe \u003cb\u003e Retro Crisscross \u003c\/b\u003e mechanism is almost the same as the Solo version, but includes mounting brackets which make it easier to install when retrofitting an existing bench. The Retro can be used on new benches and is actually easier to install. It is made from cast iron and powder coated in a matte black finish.\u003c\/li\u003e\n\u003cli\u003eThe \u003cb\u003e Crisscross 14 \u003c\/b\u003e is a smaller version of the Solo Crisscross mechanism for use on benches shorter than 30\". The mortise required is only 14-1\/4\" long - compared to 19-1\/2\" for the Solo \u0026amp; Retro. It is made from cold rolled steel. It \u003cem\u003e can \u003c\/em\u003e be used on taller benches, but is optimized for benches with a front vise jaw (the chop) that is under 30\" in length.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5 style=\"font-weight: bold;\"\u003eWhich Crisscross should you choose?\u003c\/h5\u003e\n\u003cp\u003eIf you can put your bench leg on a drill press table to drill the top pivot mounting hole, choose the Solo. If not, choose the Retro. The Crisscross 14 is not available in a retro version. On a shorter bench requiring the crisscross 14, you'll need to drill the leg on a drill press.\u003c\/p\u003e\n\u003ch5 style=\"text-align: left;\"\u003eHandwheel\u003c\/h5\u003e\n\u003cp\u003eBenchcrafted offers two options for the handwheel of the Glide Leg Vise. Both are completely designed and manufactured in the USA.\u003c\/p\u003e\n\u003cul style=\"margin-top: -3px;\"\u003e\n\u003cli\u003ePolished — This 8\" handwheel is polished to a beautiful gloss and features aluminum knobs with a black wrinkle coating.\u003c\/li\u003e\n\u003cli\u003eCast — This 8\" handwheel has a retro rough-cast look and and features aluminum knobs with a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eImportant Note - Crisscross Design Change\u003c\/h5\u003e\n\u003cp\u003eIn February 2025, Benchcrafted released a new version of the Crisscross Solo and Retro.\u003c\/p\u003e\n\u003cp\u003eThe length of the Crisscross arms (the two main parts of the mechanism) were shortened by 1-1\/2\". This allows the Crisscross to be fit into a wider variety of workbench heights and allows for a greater variety of vise installation positions without affecting performance. The mortise for the V2 Crisscross arm is now 18\" long, the previous version being 19-1\/2\" long. All other aspects of the Crisscross Solo and Retro remain unchanged.\u003c\/p\u003e\n\u003cp\u003eUpdated instructions can be downloaded below or on the Benchcrafted website.\u003c\/p\u003e\n\u003ch6 style=\"background: #E0D7C6;\" class=\"addinfo\"\u003eAdditional Information\u003c\/h6\u003e\n\u003cp\u003e\u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/BC_ CC_Glide_Ins_Aug14.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/BC_%20CC_Glide_Ins_Aug14.pdf\" title=\"Installing the Glide Vise\" target=\"_blank\"\u003e Benchcrafted Glide M or Glide C Vise Installation Instructions. \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/CrisscrossGlide_Instructions-Jan22.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/CrisscrossGlide_Instructions-Jan22.pdf\" title=\"Installing the Glide Vise\" target=\"_blank\"\u003e Benchcrafted Glide M or Glide C Vise Installation Instructions 2022. \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Crisscross_Glide_Instructions_2025.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Crisscross_Glide_Instructions_2025.pdf\" title=\"Installing the Glide Vise\" target=\"_blank\"\u003e Benchcrafted Glide M or Glide C Vise Installation Instructions 2025. \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/file-crisscross_14-instructions-2025.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/file-crisscross_14-instructions-2025.pdf\" title=\"Installing the Glide Vise\" target=\"_blank\"\u003e Benchcrafted Glide M or Glide C Vise Installation Instructions (Crisscross 14) 2025. \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Crisscross_Instruction_Apr2013.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Crisscross_Instruction_Apr2013.pdf\" title=\"Installing the Glide Vise\" target=\"_blank\"\u003e Installation Instructions for the previous Benchcrafted Glide Vise. \u003c\/a\u003e\u003c\/p\u003e","brand":"Benchcrafted","offers":[{"title":"Crisscross Solo Leg Vise \/ Polished","offer_id":50821863178522,"sku":"135232","price":518.0,"currency_code":"USD","in_stock":true},{"title":"Crisscross Solo Leg Vise \/ Cast","offer_id":50821863211290,"sku":"135237","price":430.0,"currency_code":"USD","in_stock":true},{"title":"Crisscross Retro Leg Vise \/ Polished","offer_id":50821863244058,"sku":"135233","price":562.0,"currency_code":"USD","in_stock":true},{"title":"Crisscross Retro Leg Vise \/ Cast","offer_id":50821863276826,"sku":"135238","price":474.0,"currency_code":"USD","in_stock":true},{"title":"Crisscross 14 Leg Vise \/ Polished","offer_id":50821863309594,"sku":"135260","price":479.0,"currency_code":"USD","in_stock":true},{"title":"Crisscross 14 Leg Vise \/ Cast","offer_id":50821863342362,"sku":"135261","price":391.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/135233B.png?v=1774899398"},{"product_id":"benchcrafted-split-top-roubo-bench-plan","title":"Benchcrafted Split Top Roubo Bench Plan","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Benchcrafted Split Top Roubo Bench Plan\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Split Top Roubo bench plan was inspired by the bench illustrated in Plate 11 of \nAndre Roubo's classic 17th century treatise on cabinetmaking, L'Art du Menuisier. The design has been enhanced\nto incorporate the advantages that the Benchcrafted Tail Vise and Glide Leg Vise provide. \nIt's a sophisticated set of plans that take the guesswork out of building the workbench of\nyour dreams. The measured drawings and detailed construction notes will enable you to successfully\nbuild the bench and install the vises so that they work perfectly.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The plans consist of four 20\" x 30\" printed pages of measured drawings that show the bench in \nall the necessary views including exploded, with specific details describing each part. \nConcise yet extremely detailed, the drawings are printed on 20-lb. bond paper and shipped rolled \nin a cardboard tube. Full construction notes can be downloaded below\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The completed bench measures 87\" long x 35\" tall, with a benchtop that is 24\" wide x 4\" thick. \nIt typically weighs well over 300 lbs. depending upon the species of wood you select to build it.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The plans can be purchased here by themselves, or you may purchase our\n   \u003ca data-prev-url=\"\/benchcrafted-split-top-roubo-bench-makers-package.aspx\" href=\"\/products\/benchcrafted-split-top-roubo-bench-makers-package\"\u003e\n    Benchmaker's Package\n   \u003c\/a\u003e\n   which\nincludes all the vises and necessary assembly hardware in addition to the plans (everything you need except the wood).\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Important Note - Crisscross Design Change\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   In February 2025, Benchcrafted released a new version of the Crisscross Solo and Retro.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The length of the Crisscross arms (the two main parts of the mechanism) were shortened by\n 1-1\/2\". This allows the Crisscross to be fit into a wider variety of workbench heights and\n allows for a greater variety of vise installation positions without affecting performance. The\n mortise for the V2 Crisscross arm is now 18\" long, the previous version being 19-1\/2\" long.\n All other aspects of the Crisscross Solo and Retro remain unchanged.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Updated instructions and addenda for older plans\/instructions can be downloaded below or\n on the Benchcrafted website.\n  \u003c\/p\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n  \u003ch3 style=\"background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Split-Top-Roubo_Notes-BC1014.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Split-Top-Roubo_Notes-BC1014.pdf\"\u003e\n    Benchcrafted Split Top Roubo Contruction Notes\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/2025_STR_Construction_Notes.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/2025_STR_Construction_Notes.pdf\"\u003e\n    Benchcrafted Split Top Roubo Contruction Notes 2025\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/STR_Plans_V2_Crissross_Addendum.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/STR_Plans_V2_Crissross_Addendum.pdf\"\u003e\n    Benchcrafted Split Top Roubo Workbench Crisscross Addendum 2025\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n\n\u003c\/body\u003e","brand":"Benchcrafted","offers":[{"title":"Default Title","offer_id":50821863440666,"sku":"204726","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/204726d.jpg?v=1768341772"},{"product_id":"benchcrafted-split-top-roubo-bench-makers-package","title":"Benchcrafted Split Top Roubo Bench Maker's Package","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Benchcrafted Split Top Roubo Bench Maker's Package\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Bench Maker's Package includes the detailed measured drawings for building the Benchcrafted design Split Top\n Roubo bench, plus the Tail Vise and Glide Leg Vise as well as all necessary assembly hardware (everything you need\n except the wood).\n  \u003c\/p\u003e\n  \u003c!--\u003cp\u003eFull construction notes for building the bench can be downloaded \u003ca href=\"\/library\/manuals\/benchcrafted\/BC_SplitTopRouboNotes_Feb13.pdf\" target=\"_blank\" title=\"Split Top Roubo Construction Notes\"\u003e\n \u003cb\u003ehere\u003c\/b\u003e\u003c\/a\u003e.\u003c\/p\u003e--\u003e\n  \u003cp\u003e\n   \u003ca href=\"#instructions\" style=\"tex-decoration:none; color: black;\"\u003e\n    Full construction notes for the bench \u0026amp; instructions for installing all vises can be downloaded(PDF) at the bottom of the page.\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Tail Vise\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The\n   \u003ca data-prev-url=\"\/benchcrafted-tail-vise.aspx\" href=\"\/products\/benchcrafted-tail-vise\" style=\"text-decoration:none; font-weight: bold; color:#990000\"\u003e\n    Tail Vise\n   \u003c\/a\u003e\n   is the original flagship of the award-winning Benchcrafted line of\n workbench hardware. Besides being extremely robust with absolutely precise machining, the original tail vise's real claim to fame lies in its incredibly smooth and effortless operation.\n Apply a modest spin to the handle and marvel as the vise action first accelerates and then slowly coasts to a stop. This is the way every tool should feel in response to a craftsman's\n touch. It uses a 5\" cast iron handwheel with a wooden knob.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Now, Benchcrafted offers the\n   \u003cspan style=\"font-weight:bold;font-style:italic;\"\u003e\n    Classic\n   \u003c\/span\u003e\n   version of their tail vise. It has the same smooth operation of the original tail vise,\n but has a 9\" steel sliding handle assembly with a black “Parkerized” finish (like on the Classic leg vise). It makes it easier to torque down on the vise, but you\n won't be able to do that fun spinning thing.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Leg Vises\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   All Benchcrafted leg vises use roll threaded steel acme screws with a 4 tpi pitch and a one piece acme nut milled\n from cold-rolled steel. The vises generate about 1\/2\" of vise movement per handle revolution.\n  \u003c\/p\u003e\n  \u003cp style=\"margin:0px 0px 0px 25px;\"\u003e\n   The\n   \u003ca data-prev-url=\"\/benchcrafted-glide-leg-vise.aspx\" href=\"\/products\/benchcrafted-glide-leg-vise\" style=\"text-decoration:none; font-weight: bold; color:#990000\"\u003e\n    Glide Leg Vise\n   \u003c\/a\u003e\n   has an 8\" cast iron handwheel with three knobs.\n  \u003c\/p\u003e\n  \u003cp style=\"margin:0px 0px 10px 25px;\"\u003e\n   The\n   \u003ca data-prev-url=\"\/benchcrafted-classic-leg-vise.aspx\" href=\"\/products\/benchcrafted-classic-leg-vise\" style=\"text-decoration:none; font-weight: bold; color:#990000\"\u003e\n    Classic Leg Vise\n   \u003c\/a\u003e\n   has a steel\n 15\" sliding handle assembly. It has a black \"Parkerized\" finish.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Crisscross Mechanism\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The Crisscross mechanism helps support the weight of the chop\n (the front leg jaw that moves). It eliminates the need for a parallel guide and helps the leg vise move smoothly throughout its range.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Benchcrafted Crisscross hardware comes\n three versions.\n  \u003c\/p\u003e\n  \u003cul style=\"margin-top:-3px;\"\u003e\n   \u003cli\u003e\n    The\n    \u003cb\u003e\n     Solo Crisscross\n    \u003c\/b\u003e\n    mechanism is for installation in new bench construction. It is made from cast iron and powder coated in a matte black finish.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    The\n    \u003cb\u003e\n     Retro Crisscross\n    \u003c\/b\u003e\n    mechanism is almost the same as the Solo version, but includes mounting brackets which make it easier to install when retrofitting\n an existing bench. The Retro can be used on new benches and is actually easier to install.  It is made from cast iron and powder coated in a matte black finish.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    The\n    \u003cb\u003e\n     Crisscross 14\n    \u003c\/b\u003e\n    is a smaller version of the Solo Crisscross mechanism for use on benches shorter than 30\". The mortise required is only 14-1\/4\"\n long - compared to 19-1\/2\" for the Solo \u0026amp; Retro. It is made from cold rolled steel. It\n    \u003cem\u003e\n     can\n    \u003c\/em\u003e\n    be used on taller benches, but is\tpptimized for benches with a front\n vise jaw (the chop) that is under 30\" in length.\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp style=\"margin:0px 25px 10px 25px;\"\u003e\n   \u003cb\u003e\n    Which Crisscross should you choose?\n   \u003c\/b\u003e\n   — If you can put your\n bench leg on a drill press to drill the mounting hole, get the Solo. If not, get the Retro.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Handwheels\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   Benchcrafted offers two options for the handwheels of the\n Glide Leg Vise and Tail Vise. Both are completely designed and manufactured in the USA.\n  \u003c\/p\u003e\n  \u003cul style=\"margin:-4px 10px 10px 0px;\"\u003e\n   \u003cli\u003e\n    \u003cb\u003e\n     Polished\n    \u003c\/b\u003e\n    — Machined and polished cast iron handwheels have aluminum knobs with a black wrinkle finish.\n   \u003c\/li\u003e\n   \u003c!--\u003cul style=\"margin-top:-2px;\"\u003e\n\t\t\t\t\u003cli\u003eThe Machined Leg Vise handwheel has aluminum knobs with a black wrinkle finish.\u003c\/li\u003e\n\t\t\t\t\u003cli\u003eThe Machined Tail Vise handwheel has aluminum knobs with a black wrinkle finish.\u003c\/li\u003e\n\t\t\t\u003c\/ul\u003e--\u003e\n   \u003cli\u003e\n    \u003cb\u003e\n     Cast\n    \u003c\/b\u003e\n    — Retro-look rough iron handwheels have aluminum knobs with a black wrinkle finish.\n   \u003c\/li\u003e\n   \u003c!--\u003cul style=\"margin-top:-2px;\"\u003e\n\t\t\t\t\u003cli\u003eThe Cast Leg Vise handwheel has aluminum knobs with a black wrinkle finish.\u003c\/li\u003e\n\t\t\t\t\u003cli\u003eThe Cast Tail Vise handwheel has aluminum knobs with a black wrinkle finish.\u003c\/li\u003e\n\t\t\t\u003c\/ul\u003e--\u003e\n  \u003c\/ul\u003e\n  \u003c!--\u003cp style=\"margin:0px 0px 0px 25px;\"\u003e\u003cb\u003eMachined\u003c\/b\u003e \u0026mdash; Machined and polished cast iron with Dymondwood knobs.\u003c\/p\u003e\n\u003cp style=\"margin:0px 0px 10px 25px;\"\u003e\u003cb\u003eCast\u003c\/b\u003e \u0026mdash; Retro-look rough iron with acrylic-infused Beech knobs.\u003c\/p\u003e\n\u003cp style=\"border: 3px solid #660000;border-radius:8px;background-color:#EDE9E2;padding:4px;text-align:center;\"\u003e\n\u003cspan style=\"font-weight:bold; color:#660000;\"\u003ePLEASE NOTE:\u003c\/span\u003e Benchcrafted is changing from the wooden knobs described above\n to aluminum knobs with a black wrinkle coating. We'll ship the tail vises equipped with wooden knobs first.\u003c\/p\u003e--\u003e\n  \u003ch5\u003e\n   Packages Include:\n  \u003c\/h5\u003e\n  \u003cul style=\"margin:-4px 0px 15px 0px;\"\u003e\n   \u003cli\u003e\n    Leg Vise with Crisscross Mechanism\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Tail Vise\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Hardware Pack\n   \u003c\/li\u003e\n   \u003cul style=\"margin:-2px 0px 0px 0px;\"\u003e\n    \u003cli\u003e\n     Set of Four Barrel Bolts\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Set of Two End Cap Barrel Bolts\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Four Spax Lag Screws\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cli\u003e\n    Printed Plans\n   \u003c\/li\u003e\n   \u003cli\u003e\n    \u003cspan style=\"font-style:italic;\"\u003e\n     The Benchmaker's Package DOES NOT include the wooden part of the bench or any of the wood\n required to make the wooden part of the bench.\n    \u003c\/span\u003e\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch5\u003e\n   Important Note - Crisscross Design Change\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   In February 2025, Benchcrafted released a new version of the Crisscross Solo and Retro.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The length of the Crisscross arms (the two main parts of the mechanism) were shortened by\n 1-1\/2\". This allows the Crisscross to be fit into a wider variety of workbench heights and\n allows for a greater variety of vise installation positions without affecting performance. The\n mortise for the V2 Crisscross arm is now 18\" long, the previous version being 19-1\/2\" long.\n All other aspects of the Crisscross Solo and Retro remain unchanged.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Updated instructions can be downloaded below or on the Benchcrafted website.\n  \u003c\/p\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n  \u003ch3 style=\" background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003ch4\u003e\n   Tail Vise Installation\n  \u003c\/h4\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Tail-Vise_Instructions-Mar19.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Tail-Vise_Instructions-Mar19.pdf\" target=\"_blank\"\u003e\n    M or C Tail Vise installation instructions.\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Tail-Vise-Classic_Instructions-Oct18.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Tail-Vise-Classic_Instructions-Oct18.pdf\" target=\"_blank\"\u003e\n    Classic Tail Vise installation instructions.\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n  \u003ch4\u003e\n   Glide Leg Vise Installation\n  \u003c\/h4\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/CrisscrossGlide_Instructions-Jan22.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/CrisscrossGlide_Instructions-Jan22.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Glide M or Glide C Vise Installation Instructions 2022.\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Crisscross_Glide_Instructions_2025.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Crisscross_Glide_Instructions_2025.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Glide M or Glide C Vise Installation Instructions 2025.\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Crisscross14_Instructions-Jul21.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Crisscross14_Instructions-Jul21.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Glide M or Glide C Vise with Crisscross 14 Installation Instructions 2021.\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/file-crisscross_14-instructions-2025.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/file-crisscross_14-instructions-2025.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Glide M or Glide C Vise with Crisscross 14 Installation Instructions 2025.\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003ch4\u003e\n   Classic Vise Installation\n  \u003c\/h4\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Classic_Leg_Vise_Instructions-Jan22.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Classic_Leg_Vise_Instructions-Jan22.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Classic Leg Vise Installation Instructions - 2022.\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Classic_Leg_Vise_Instructions_2025.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Classic_Leg_Vise_Instructions_2025.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Classic Leg Vise Installation Instructions - 2025.\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n  \u003c!--\u003cp\u003e\u003ca href=\"\/library\/manuals\/benchcrafted\/Crisscross_Instruction_Apr2013.pdf\"target=\"_blank\" title=\"Installing the Glide Vise\"\u003eInstallation Instructions for the previous Benchcrafted Glide Vise.\u003c\/a\u003e PDF\u003c\/p\u003e--\u003e\n  \u003ch4\u003e\n   Construction Notes\n  \u003c\/h4\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Split-Top-Roubo_Notes-BC1014.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Split-Top-Roubo_Notes-BC1014.pdf\" title=\"Split Top Roubo Construction Notes\"\u003e\n    Full construction notes for building the bench.\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n  \u003ca name=\"instructions\"\u003e\n  \u003c\/a\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/2025_STR_Construction_Notes.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/2025_STR_Construction_Notes.pdf\"\u003e\n    Benchcrafted Split Top Roubo Contruction Notes 2025\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/STR_Plans_V2_Crissross_Addendum.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/STR_Plans_V2_Crissross_Addendum.pdf\"\u003e\n    Benchcrafted Split Top Roubo Workbench Crisscross Addendum 2025\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Benchcrafted","offers":[{"title":"Glide - Polished Finish \/ Solo \/ Machined Finish","offer_id":50821863506202,"sku":"135234","price":1020.0,"currency_code":"USD","in_stock":true},{"title":"Glide - Polished Finish \/ Retro \/ Machined Finish","offer_id":50821863538970,"sku":"135235","price":1064.0,"currency_code":"USD","in_stock":true},{"title":"Glide - Polished Finish \/ Crisscross 14 - Small \/ Machined Finish","offer_id":50821863571738,"sku":"135255","price":981.0,"currency_code":"USD","in_stock":true},{"title":"Glide - Cast Finish \/ Solo \/ Cast Finish","offer_id":50821863604506,"sku":"135242","price":844.0,"currency_code":"USD","in_stock":true},{"title":"Glide - Cast Finish \/ Retro \/ Cast Finish","offer_id":50821863637274,"sku":"135243","price":888.0,"currency_code":"USD","in_stock":true},{"title":"Glide - Cast Finish \/ Crisscross 14 - Small \/ Cast Finish","offer_id":50821863670042,"sku":"135256","price":805.0,"currency_code":"USD","in_stock":true},{"title":"Classic - Black Finish \/ Solo \/ Classic - Black Finish","offer_id":50821863702810,"sku":"135257","price":784.0,"currency_code":"USD","in_stock":true},{"title":"Classic - Black Finish \/ Retro \/ Classic - Black Finish","offer_id":50821863735578,"sku":"135258","price":828.0,"currency_code":"USD","in_stock":true},{"title":"Classic - Black Finish \/ Crisscross 14 - Small \/ Classic - Black Finish","offer_id":50821863768346,"sku":"135259","price":745.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/135235d.jpg?v=1768341775"},{"product_id":"benchcrafted-crisscross-hardware","title":"Benchcrafted Crisscross Hardware","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Benchcrafted Crisscross Hardware\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  The Benchcrafted Crisscross supports the weight of the vise hardware and the chop (the moving vise jaw),\nallowing the Crisscross to smoothly \"float\" in and out, making the vise far more pleasant to use and\neliminating the need to manually adjust a parallel guide when changing workpiece thickness. The Crisscross\ncan be used on any leg vise installation, including ones using traditional vise screws rather than ones\nmade by Benchcrafted. If you installed a Benchcrafted Glide Vise before the Crisscross mechanism became available,\nyou can possible upgrade your Glide Vise by using the Crisscross Retro.\n  \u003ch5\u003e\n   Mounting\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The Solo and Retro Crisscross use slightly different mounting systems. The\n   \u003cstrong\u003e\n    Solo\n   \u003c\/strong\u003e\n   Crisscross has a slim body\n that mounts into a narrow mortise in the bench leg. It requires a precision drilled hole for the pivot pins. Benchcrafted\n   \u003cspan style=\"font-weight:bold;font-style:italic;\"\u003e\n    strongly recommends\n   \u003c\/span\u003e\n   using a drill press to drill this hole. Of course,\n that's not practical on an existing workbench. That's why Benchcrafted offers the\n   \u003cstrong\u003e\n    Retro\n   \u003c\/strong\u003e\n   Crisscross which includes\n mounting brackets to simplify retrofit installations without the need for a drill press.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Which Crisscross should you choose?\n   \u003c\/b\u003e\n   — If you can put your bench leg on a drill press to drill the mounting hole, get the Solo. If not, get the Retro.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Crisscross 14\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The Crisscross 14 is a smaller version of the Solo Crisscross mechanism for use on benches shorter than 30\". The mortise required is only 14-1\/4\" long -\n compared to 19-1\/2\" for the Solo \u0026amp; Retro. It is made from cold rolled steel. It\n   \u003cem\u003e\n    can\n   \u003c\/em\u003e\n   be used on taller benches, but is optimized for for benches\n under 30\".\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Important Note - Crisscross Design Change\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   In February 2025, Benchcrafted released a new version of the Crisscross Solo and Retro.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The length of the Crisscross arms (the two main parts of the mechanism) were shortened by\n 1-1\/2\". This allows the Crisscross to be fit into a wider variety of workbench heights and\n allows for a greater variety of vise installation positions without affecting performance. The\n mortise for the V2 Crisscross arm is now 18\" long, the previous version being 19-1\/2\" long.\n All other aspects of the Crisscross Solo and Retro remain unchanged.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Updated instructions can be downloaded below or on the Benchcrafted website.\n  \u003c\/p\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n  \u003ch3 style=\" background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003ch4\u003e\n   Glide Leg Vise Installation\n  \u003c\/h4\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/CrisscrossGlide_Instructions-Jan22.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/CrisscrossGlide_Instructions-Jan22.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Glide M or Glide C Vise Installation Instructions 2022.\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Crisscross_Glide_Instructions_2025.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Crisscross_Glide_Instructions_2025.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Glide M or Glide C Vise Installation Instructions 2025.\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Crisscross14_Instructions-Jul21.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Crisscross14_Instructions-Jul21.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Glide M or Glide C Vise with Crisscross 14 Installation Instructions 2021.\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/file-crisscross_14-instructions-2025.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/file-crisscross_14-instructions-2025.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Glide M or Glide C Vise with Crisscross 14 Installation Instructions 2025.\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003ch4\u003e\n   Classic Vise Installation\n  \u003c\/h4\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Classic_Leg_Vise_Instructions-Jan22.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Classic_Leg_Vise_Instructions-Jan22.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Classic Leg Vise Installation Instructions - 2022.\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Classic_Leg_Vise_Instructions_2025.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Classic_Leg_Vise_Instructions_2025.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Classic Leg Vise Installation Instructions - 2025.\n   \u003c\/a\u003e\n   PDF\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Benchcrafted","offers":[{"title":"Crisscross Solo Hardware","offer_id":50821863833882,"sku":"135177","price":126.0,"currency_code":"USD","in_stock":true},{"title":"Crisscross Retro Hardware","offer_id":50821863866650,"sku":"135178","price":170.0,"currency_code":"USD","in_stock":true},{"title":"Crisscross 14 Hardware","offer_id":50821863899418,"sku":"135254","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/crisscrossd.jpg?v=1768341777"},{"product_id":"veritas-prairie-dog","title":"Veritas Prairie Dog - Pair","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Prairie Dog - Pair\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Veritas Prairie Dog is the stop that is always in place, ready to deploy whenever needed, yet out of the way when it's not needed.\nAt the press of a finger the Prairie Dog pops out of its hole and locks into position about 5\/16\" proud, ready to serve as a planing stop. \nPress it again to retract it back into its dog hole out of your way.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Body is made of 3\/4\" solid brass rod. Its spring mechanism can be height adjusted to fit bench holes 2 to 2-1\/2\" deep. \nTo use in a through hole, mount an included stop plate to the underside of the bench for the dog to rest on, where it is held in place\nby a rare earth magnet. The stop plate can pivot out of the way to allow the hole to be used for other purposes. For use in a blind hole,\na washer is countersunk at the bottom of the hole.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Sold in pairs.\n   \u003ca data-prev-url=\"\/Extra-Stop-Plates-Veritas-Prairie-Dogs-Pk\/4.aspx\" href=\"\/products\/extra-stop-plates-veritas-prairie-dogs-pk-4\" title=\"Extra stop plates pk 4\"\u003e\n    Optional extra stop plates\n   \u003c\/a\u003e\n   are available as a set of 4 to allow the Prairie Dogs to be used in multiple holes.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821864128794,"sku":"177086","price":35.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/177086.jpg?v=1751684910"},{"product_id":"extra-stop-plates-veritas-prairie-dogs-pk-4","title":"Extra Stop Plates for Veritas Prairie Dogs - Pack of 4","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Extra Stop Plates for Veritas Prairie Dogs - Pack of 4\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This set of 4 Extra Stop Plates is an optional accessory for the\n   \u003ca data-prev-url=\"\/Veritas-Prairie-Dog.aspx\" href=\"\/products\/veritas-prairie-dog\" title=\"Veritas Prairie Dogs\"\u003e\n    Veritas Prairie Dogs\n   \u003c\/a\u003e\n   to allow the dogs to be used in multiple bench locations.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821864227098,"sku":"177087","price":4.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/177087.jpg?v=1751684912"},{"product_id":"kreg-automaxx-bench-klamp-system","title":"Kreg Automaxx Bench Klamp System","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kreg Automaxx Bench Klamp System\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Kreg Automaxx Bench Klamp System brings new ease and versatility to fill your benchtop\nclamping needs. The Kreg Klamp Plate can be easily routed into your workbench or other\nwooden work surface. Once installed, it accepts any Kreg Bench Clamp, but when not in use,\nthe clamps can be removed leaving a perfectly flush work surface.\n  \u003c\/p\u003e\n  \u003cp\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Automaxx Klamps feature advanced technology that allows them to automatically adjust\nto different workpiece thicknesses (up to 2-1\/2\") without the need for manual adjustment. They also feature\neasy-to-regulate clamping force that once set, is maintained each time you use them, regardless\nof the workpiece thickness. The clamp can be easily rotated 360 degrees to fill any benchtop clamping need.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 3\"-reach clamp included in this kit features extra-large clamp faces, comfortable padded handles, \nand heavy-duty construction.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"Default Title","offer_id":50821865898266,"sku":"124111","price":73.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/124111.jpg?v=1751684955"},{"product_id":"kreg-automaxx-bench-klamp","title":"Kreg Automaxx Bench Klamp","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kreg Automaxx Bench Klamp\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Kreg's Automaxx Klamps are designed to attach to your workbench where you've mounted a stationary Kreg Klamp Plate\n(available separately),\nor at any point along a Kreg Klamp Trak (available separately) that you've mounted to your worktable.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   These clamps feature advanced technology that allows them to automatically adjust\nto different workpiece thicknesses (up to 2-1\/2\") without the need for manual adjustment. \nOnce set using an easy-to-adjust thumbscrew, your desired clamping force is maintained each time you use them, regardless\nof the workpiece thickness. Each clamp features extra-large clamp faces, comfortable padded handles, \nand heavy-duty construction. Two sizes are available, one with 3\" reach and the other with 6\" reach.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"3in","offer_id":50821866619162,"sku":"124138","price":52.5,"currency_code":"USD","in_stock":true},{"title":"6in","offer_id":50821866651930,"sku":"124137","price":63.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/124138d_6a252d3d-a45a-4840-bf78-af2c2a06dd3c.jpg?v=1768341795"},{"product_id":"benchcrafted-classic-leg-vise","title":"Benchcrafted Classic Leg Vise","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Benchcrafted Classic Leg Vise\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   After the great success of their exquisite\n   \u003ca data-prev-url=\"\/benchcrafted-glide-leg-vise.aspx\" href=\"\/products\/benchcrafted-glide-leg-vise\" target=\"_blank\"\u003e\n    Glide Leg Vise\n   \u003c\/a\u003e\n   ,\n Benchcrafted has produced a new leg vise version, the Benchcrafted Classic Leg Vise.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   While the handwheel design of the Glide Vise probably provides the smoothest and most ergonomic\nmovement of the leg vise screw, the T-handle design of the Classic Vise works quite smoothly as well\nwhile also giving a pleasing traditional appearance that some bench owners will prefer.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   An obvious question is \"What is the difference between the Classic and the Glide?\" Jameel\nAbraham, Benchcrafted's main designer, answers this way:\n  \u003c\/p\u003e\n  \u003cblockquote\u003e\n   \"We made the Classic purely for its looks. Some people prefer the traditional look. Buy\nthe Glide if you prefer a more refined feel and modern look (think Porsche 911) Buy the\nClassic if you like things a little more stock and old-school (think '69 Dodge Charger).\nBoth get you from A to B, just a little different way.\"\n  \u003c\/blockquote\u003e\n  \u003cp\u003e\n   In general, leg vises have a number of advantages over ordinary cast iron vises. Because a\nleg vise does not need the pair of guide rods needed on a Record-style vise, it's\npossible to clamp a workpiece right up against the screw and thus virtually eliminate\nracking. Leg vises allow about 9\" of workable depth, more than twice that typical of iron\nface vises, plus the mechanical advantage inherent in a leg vise's geometry provides a\nmore powerful overall grip.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The smooth turning, double lead acme screw with a 4tpi pitch gives this vise hardware a\n highly efficient 1\/2\" of travel per revolution of the handle.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Benchcrafted Classic Leg Vise is fully machined from steel components, and its hub,\nT-handle and flange feature a very pleasing and durable black Parkerized finish. The\nhandle is machined with a V-groove detent centered along its length that engages with a\nstainless steel spring plunger in the center of the hub, allowing one to quickly center\nthe handle and thus balance it to spin rapidly for large movements. Watch the short video\nabove to see this in action.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Classic Leg Vise can be purchased with either the Solo or Retro Crisscross scissor mechanism,\nor without the Crisscross for installation using a traditional parallel guide that you provide.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Crisscross Mechanism\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   Benchcrafted's  Crisscross mechanism makes operation of the leg vise even sweeter. The scissor\naction of the \"St. Peter's Cross\" eliminates the need for a traditional leg vise's\nparallel guide and adjustment pin, and instead takes advantage of the mass and free\nspinning action of the hand wheel to provide smooth and unencumbered movement over the\nvise's entire range.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Benchcrafted Crisscross hardware comes three versions.\n  \u003c\/p\u003e\n  \u003cul style=\"margin-top:-3px;\"\u003e\n   \u003cli\u003e\n    The\n    \u003cb\u003e\n     Solo Crisscross\n    \u003c\/b\u003e\n    mechanism is for installation in new bench construction. It is made from cast iron and powder coated in a matte black finish.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    The\n    \u003cb\u003e\n     Retro Crisscross\n    \u003c\/b\u003e\n    mechanism is almost the same as the Solo version, but includes mounting brackets which make it easier to install when retrofitting\n\t\tan existing bench. The Retro can be used on new benches and is actually easier to install.  It is made from cast iron and powder coated in a matte black finish.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    The\n    \u003cb\u003e\n     Crisscross 14\n    \u003c\/b\u003e\n    is a smaller version of the Solo Crisscross mechanism for use on benches shorter than 30\". The mortise required is only\n\t\t14-1\/4\" long - compared to 18\" for the Solo \u0026amp; Retro. It is made from cold rolled steel. It\n    \u003cem\u003e\n     can\n    \u003c\/em\u003e\n    be used on taller benches, but is\n\t\toptimized for benches with a front vise jaw (the chop) that is under 30\" in length.\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp style=\"font-weight: bold;\"\u003e\n   Which Crisscross should you choose?\n  \u003c\/p\u003e\n  \u003cp\u003e\n   If you can put your bench leg on a drill press table to drill the top pivot mounting hole, choose the Solo. If not, choose the Retro. The Crisscross 14 is not available in a\nretro version. On a shorter bench requiring the crisscross 14, you'll need to drill the leg on a drill press.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    This vise is only the hardware and does NOT include wood\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Like all Benchcrafted vises, the Classic Leg Vise is designed and manufactured entirely in the U.S.A.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Important Note - Crisscross Design Change\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   In February 2025, Benchcrafted released a new version of the Crisscross Solo and Retro.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The length of the Crisscross arms (the two main parts of the mechanism) were shortened by\n 1-1\/2\". This allows the Crisscross to be fit into a wider variety of workbench heights and\n allows for a greater variety of vise installation positions without affecting performance. The\n mortise for the V2 Crisscross arm is now 18\" long, the previous version being 19-1\/2\" long.\n All other aspects of the Crisscross Solo and Retro remain unchanged.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Updated instructions can be downloaded below or on the Benchcrafted website.\n  \u003c\/p\u003e\n  \u003ch3 style=\" background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003c!--\u003cp\u003e\u003ca href=\"\/library\/manuals\/benchcrafted\/BC_Classic_LegVise_Install_Inst_Aug14.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003eBenchcrafted Classic Leg Vise Installation Instructions.\u003c\/a\u003e\u003c\/p\u003e--\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Classic_Leg_Vise_Instructions-Jan22.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Classic_Leg_Vise_Instructions-Jan22.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Classic Leg Vise Installation Instructions - 2022.\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Classic_Leg_Vise_Instructions_2025.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Classic_Leg_Vise_Instructions_2025.pdf\" target=\"_blank\" title=\"Installing the Glide Vise\"\u003e\n    Benchcrafted Classic Leg Vise Installation Instructions - 2025.\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Benchcrafted","offers":[{"title":"Classic Hardware Only","offer_id":50821891588378,"sku":"135183","price":232.0,"currency_code":"USD","in_stock":true},{"title":"Crisscross Solo Leg Vise","offer_id":50821891621146,"sku":"135184","price":358.0,"currency_code":"USD","in_stock":true},{"title":"Crisscross Retro Leg Vise","offer_id":50821891653914,"sku":"135185","price":402.0,"currency_code":"USD","in_stock":true},{"title":"Crisscross 14 Leg Vise","offer_id":50821891686682,"sku":"135262","price":319.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/135185-1d_48664bff-45c3-4257-87ba-f8d4f8ed2081.jpg?v=1768341977"},{"product_id":"sjobergs-file-clamp","title":"Sjobergs File Clamp","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Sjöbergs File Clamp\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Sjöbergs calls this a File Clamp (actually a Filklämma). Others call it a Tool Vise.  We call it a saw sharpening vise.  It fits into the existing vise on your workbench and extends its reach above the bench by about 8 inches. To hold your hand saw, fit it between the jaws of the \"file clamp\" and tighten your bench vise. With your saw clamped in this vise, you can sharpen it easily. The saw is held firmly and it's up off the workbench surface where it's much easier to see.\n  \u003c\/p\u003e\n  \u003c!--Notch in side fits over vise screw--\u003e\n  \u003c!--\n\nmfg propaganda\n\nFile clamp 33492\n\nSjöbergs file clamp fits into a vice end and is equipped with abrasive cloth to secure the work object.\nOpens 5 33\/64” 140 mm. Fits all our benches!\n\n\nItem no. \t33492\nMaterial \tBirch\nDimensions, mm\nLength 310\nWidth 130\nHeight 135\nWeight, kg \t1,4\nEAN \t7316703492107 \n\n\n\nSjöbergs File clamp 33490\n\nSjöbergs File clamp fits our workbenches for school and Sjöbergs Original 1900. The File clamp fits into a vice end and is equipped with abrasive cloth to secure the work object.\nOpens 140 mm.\n\nItem no. \t33490\nMaterial \tBirch\nDimensions, mm\nLength 400\nWidth 125\nHeight 125\nWeight, kg \t1,4\nEAN \t7316703490103 \n\n--\u003e\n \n\u003c\/body\u003e","brand":"Sjobergs Workbenches","offers":[{"title":"Default Title","offer_id":50821918228762,"sku":"115036","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/115036d.jpg?v=1768342105"},{"product_id":"sjobergs-adjustable-vise","title":"Sjobergs AV-25 Adjustable Vise","description":"\u003cbody\u003e\n  \u003cp\u003e\n   This is a version of the vise that Sjöbergs puts on the\n   \u003ca data-prev-url=\"\/sjobergs-workbench-elite-with-drawer-cabinet.aspx\" href=\"\/products\/sjobergs-workbench-elite-with-drawer-cabinet\"\u003e\n    Elite Workbench\n   \u003c\/a\u003e\n   .\n It's a really easy way to mount a top quality vise to your custom workbench. It bolts to the bottom of your workbench top and uses a custom wooden jaw\n that you make. The Adjustable Vise is suitable for workbenches up to 23\" wide, with vise jaws from 13\" to 17\" wide.  The approximate\n footprint for the vise hardware plate mounting under the bench is 15 inches wide x 12-3\/4 inches deep.  Comes with a wooden vise handle.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Mounting screws NOT included.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Sjobergs Workbenches","offers":[{"title":"Default Title","offer_id":50821918392602,"sku":"115031","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/115044.jpg?v=1777401154"},{"product_id":"sjobergs-tool-savers","title":"Tool Savers for Sjobergs 1 inch Bench Dogs","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Tool Savers for Sjöbergs 1 inch Bench Dogs\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Tool Savers are rubber rings that fit around Sjöbergs 1 inch Bench Dogs to protect your hand planes from accidental damage upon striking a bench dog.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Pack of four.\n  \u003c\/p\u003e\n  \u003c!-- fits Elites benches--\u003e\n \n\u003c\/body\u003e","brand":"Sjobergs Workbenches","offers":[{"title":"Default Title","offer_id":50821918556442,"sku":"115037","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/115037d.jpg?v=1768342112"},{"product_id":"sjobergs-bench-dogs","title":"Sjobergs Bench Dogs - Pack of 4","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Sjöbergs Bench Dogs - Pack of 4\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   All Sjöbergs workbenches come with bench dogs, but you may need more than the four that come with the bench.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    3\/4\" by 1-5\/8\" bench dogs\n   \u003c\/b\u003e\n   fit Sjöbergs\n   \u003ca data-prev-url=\"\/sjobergs-smart-vise.aspx\" href=\"\/products\/sjobergs-smart-vise\"\u003e\n    Smart Vise\n   \u003c\/a\u003e\n   \u0026amp; Minor workbench.  They'll also fit any other workbench that uses\n 3\/4\"(19mm) bench dogs – like our\n   \u003ca data-prev-url=\"\/european-workbench.aspx\" href=\"\/products\/european-workbench\"\u003e\n    European Workbench\n   \u003c\/a\u003e\n   \u0026amp;\n   \u003ca data-prev-url=\"\/premium-european-workbench.aspx\" href=\"\/products\/premium-european-workbench\"\u003e\n    Large Premium European Workbench\n   \u003c\/a\u003e\n   .\n Made of black plastic.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    3\/4\" by 4-3\/8\" bench dogs\n   \u003c\/b\u003e\n   fit Sjöbergs\n   \u003ca data-prev-url=\"\" href=\"https:\/\/info.highlandwoodworking.com\"\u003e\n    Scandi Plus\n   \u003c\/a\u003e\n   ,\n   \u003ca data-prev-url=\"\" href=\"https:\/\/info.highlandwoodworking.com\"\u003e\n    Nordic Plus\n   \u003c\/a\u003e\n   ,\n   \u003ca data-prev-url=\"\" href=\"https:\/\/info.highlandwoodworking.com\"\u003e\n    Duo\n   \u003c\/a\u003e\n   ,\n   \u003ca data-prev-url=\"\" href=\"https:\/\/info.highlandwoodworking.com\"\u003e\n    Junior\n   \u003c\/a\u003e\n   ,\n   \u003ca data-prev-url=\"\" href=\"https:\/\/info.highlandwoodworking.com\"\u003e\n    Senior\n   \u003c\/a\u003e\n   \u0026amp;\n   \u003ca data-prev-url=\"\" href=\"https:\/\/info.highlandwoodworking.com\"\u003e\n    Minor\n   \u003c\/a\u003e\n   workbenches.  They'll also fit any other workbench that uses\n 3\/4\"(19mm) bench dogs – like our\n   \u003ca data-prev-url=\"\/european-workbench.aspx\" href=\"\/products\/european-workbench\"\u003e\n    European Workbench\n   \u003c\/a\u003e\n   \u0026amp;\n   \u003ca data-prev-url=\"\/premium-european-workbench.aspx\" href=\"\/products\/premium-european-workbench\"\u003e\n    Large Premium European Workbench\n   \u003c\/a\u003e\n   .\n Made of fiber reinforced plastic.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    1\" by 7-5\/8\" bench dogs\n   \u003c\/b\u003e\n   fit Sjöbergs\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/sjobergs-workbench-elite-with-drawer-cabinet.aspx\" href=\"\/products\/sjobergs-workbench-elite-with-drawer-cabinet\"\u003e\n    Elite Workbenches\n   \u003c\/a\u003e\n   .\n They are available in steel and aluminum.\n  \u003c\/p\u003e\n  \u003cp\u003e\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Sjobergs Workbenches","offers":[{"title":"3\/4 inch Plastic - Short","offer_id":50821918720282,"sku":"115075","price":21.0,"currency_code":"USD","in_stock":true},{"title":"3\/4 inch Plastic","offer_id":50821918753050,"sku":"115029","price":59.0,"currency_code":"USD","in_stock":true},{"title":"1 inch Aluminum","offer_id":50821918785818,"sku":"115028","price":188.0,"currency_code":"USD","in_stock":true},{"title":"1 inch Steel","offer_id":50821918818586,"sku":"115030","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/115029d.jpg?v=1768342116"},{"product_id":"sjobergs-bench-holdfast","title":"Sjobergs Bench Holdfast","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Sjöbergs Bench Holdfast\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Holdfasts are great for clamping large workpieces to your workbench. Sjöbergs offers a few great holdfasts to fit their benches.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The\n   \u003cb\u003e\n    3\/4\" holdfast\n   \u003c\/b\u003e\n   fits Sjöbergs\n   \u003ca data-prev-url=\"\" href=\"https:\/\/info.highlandwoodworking.com\"\u003e\n    Scandi Plus\n   \u003c\/a\u003e\n   ,\n   \u003ca data-prev-url=\"\" href=\"https:\/\/info.highlandwoodworking.com\"\u003e\n    Nordic Plus\n   \u003c\/a\u003e\n   ,\n   \u003ca data-prev-url=\"\" href=\"https:\/\/info.highlandwoodworking.com\"\u003e\n    Duo\n   \u003c\/a\u003e\n   ,\n   \u003ca data-prev-url=\"\" href=\"https:\/\/info.highlandwoodworking.com\"\u003e\n    Junior\n   \u003c\/a\u003e\n   ,\n   \u003ca data-prev-url=\"\" href=\"https:\/\/info.highlandwoodworking.com\"\u003e\n    Senior\n   \u003c\/a\u003e\n   \u0026amp;\n   \u003ca data-prev-url=\"\" href=\"https:\/\/info.highlandwoodworking.com\"\u003e\n    Minor\n   \u003c\/a\u003e\n   workbenches. You drop it into a dog hole, press it tight against the workpiece and tighten the clamping screw. It works like a traditional holdfast, but with an added screw clamp.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Unlike traditional holdfasts,\n   \u003cb\u003e\n    Deluxe Holdfasts\n   \u003c\/b\u003e\n   fit tightly into a workbench dog hole.  The post stays at approximately 90° to the workbench surface and clamp straight down on your workpiece. The large clamping surface has a protective plastic pad to prevent marring the workpiece. Deluxe holdfasts are available in 3\/4\" to fit a variety of workbenches (see above) as well as the\n   \u003cb\u003e\n    Smart Workstation Pro\n   \u003c\/b\u003e\n   and a 1\" size to fit\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/sjobergs-workbench-elite-with-drawer-cabinet.aspx\" href=\"\/products\/sjobergs-workbench-elite-with-drawer-cabinet\"\u003e\n    Sjöbergs Elite Workbenches.\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   3\/4\" standard and deluxe holdfasts fit into a 3\/4\" hole. The 1\" deluxe holdfast fits into a 1\" hole.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Sjobergs Workbenches","offers":[{"title":"3\/4 inch - Pack of 2","offer_id":50821918982426,"sku":"115042","price":63.0,"currency_code":"USD","in_stock":true},{"title":"3\/4 inch Deluxe","offer_id":50821919015194,"sku":"115043","price":93.0,"currency_code":"USD","in_stock":true},{"title":"1 inch Deluxe","offer_id":50821919047962,"sku":"115041","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/115042d.jpg?v=1768342118"},{"product_id":"sjobergs-vise-jaw-cushions","title":"Sjobergs Cork Vise Jaw Cushions","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Sjöbergs Cork Vise Jaw Cushions\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Sjöbergs self-adhesive cork vise jaw cushions stick to the vise faces on your workbench and protect your workpieces from damage while clamping.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Small cork vise cushions\n   \u003c\/b\u003e\n   are 430mm x 35mm (~16-15\/16\" x 1-3\/8\"). They are made to fit Sjöbergs Scandi Plus, Nordic Plus, Duo, Hobby Plus, Junior, Senior \u0026amp; Minor workbenches.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Large cork vise cushions\n   \u003c\/b\u003e\n   are 600mm x 80 mm (~23-5\/8\" x 3-1\/8\"). They are made to fit Sjöbergs Elite workbenches and Sjöbergs Smart Vises.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Of course, these cushions can be used on any workbench.  You just need to match the size of the cushion to the size of the vise jaws on your bench.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Pack of two cushions. Enough to equip one vise.\n  \u003c\/p\u003e\n  \u003c!--\n\nSmall 430mm x 35mm - 16-15\/16\" x 1-3\/8\" fits scandi plus, duo nordic plus, hobby plus, junior,senior, minor workbenches\nLarge 600mm x 80mm - 23-5\/8\" x 3-1\/8\" fits elite\n\n--\u003e\n \n\u003c\/body\u003e","brand":"Sjobergs Workbenches","offers":[{"title":"Small","offer_id":50821919211802,"sku":"115033","price":23.0,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":50821919244570,"sku":"115034","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/115033d_0c9cf9aa-f18c-40a8-adbd-75d950d59148.jpg?v=1768342120"},{"product_id":"sjobergs-workbench-anvil-attachment","title":"Sjobergs Workbench Anvil Attachment","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Sjöbergs Workbench Anvil Attachment\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Hang on a minute there...this isn't an ANVIL like a blacksmith uses. This is an attachment for a Sjöbergs Workbench that allows you to do a little bit of\n metal shaping in the course of your woodworking.  It's a heavy steel plate that hooks into a dog hole on the bench and hangs over the front edge. Using the anvil\n attachment you can flatten a hinge or bend a steel rod without wrecking your beautiful woodworking bench.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The anvil attachment has a steel rod(or lug) that slides into a dog hole to hold it in place. The lug is adjustable so it can be moved to fit the offset from\n the bench front to the dog hole on almost any bench.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin:-4px 0px 0px 0px\"\u003e\n   \u003cli\u003e\n    Thickness – 6mm (~1\/4\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Width – 250mm (~9-13\/16\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Depth – 125mm (~4-15\/16\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Front Plate Height – 75mm (~2-15\/16\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Lug Diameter – 18mm (~3\/4\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Lug Length – 35mm(~1-3\/8\")\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Lug to front plate gap – 13mm (~1\/2\") to 78mm (~3-1\/16\")\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cbr\u003e\n  \u003ch5\u003e\n   Fit\n  \u003c\/h5\u003e\n  \u003cp style=\"margin:-4px 0px 0px 0px\"\u003e\n   The Universal Workbench Anvil Attachment fits these Sjöbergs Workbench models: Elite, Duo, Scandi Plus, Nordic Plus, Hobby Plus and Junior\/Senior. It also fits all other workbenches we carry.\n  \u003c\/p\u003e\n  \u003c!-- fits Nordic plus, hobby plus, junior and senior\nUniversal anvil fits all Elite, Duo, Scandi Plus, Nordic Plus, Hobby Plus and Junior\/Senior.\nFor metal working\n--\u003e\n \n\u003c\/body\u003e","brand":"Sjobergs Workbenches","offers":[{"title":"Default Title","offer_id":50821919408410,"sku":"115038","price":80.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/115038d.jpg?v=1768342121"},{"product_id":"sjobergs-smart-workstation-pro","title":"Sjobergs Smart Workstation Pro","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   Like the\n   \u003ca data-prev-url=\"\/sjobergs-amsrt-vise.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/sjobergs-amsrt-vise.aspx\"\u003e\n    Sjöbergs Smart Vise\n   \u003c\/a\u003e\n   , the Smart Workstation Pro is a great workbench solution for the space or budget challenged woodworker.\n The Smart Workstation Pro bench top clamps to nearly any counter or table, but adds 30% more worktop area and 7 lbs more weight than the original Smart Vise.  The work surface is made from solid beech.\n It won't replace a full workbench, but you could definitely hold a drawer side or front in it to make hand-cut dovetails.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Smart Workstation Pro includes four bench dogs with side springs and comes in a box that can be used for storage or transport.\n Sjöbergs also offers a variety of accessories for use with the Workstation Pro, including\n   \u003ca data-prev-url=\"\/sjobergs-vise-jaw-cushions.aspx\" href=\"\/products\/sjobergs-vise-jaw-cushions\"\u003e\n    cork jaw cushions\n   \u003c\/a\u003e\n   to protect your workpiece,\n the\n   \u003ca data-prev-url=\"\/sjobergs-bench-holdfast.aspx\" href=\"\/products\/sjobergs-bench-holdfast\"\u003e\n    Holdfast\n   \u003c\/a\u003e\n   to hold you work down to the work surface and \n the\n   \u003ca data-prev-url=\"\/sjobergs-workbench-anvil-attachment.aspx\" href=\"\/products\/sjobergs-workbench-anvil-attachment\"\u003e\n    anvil\n   \u003c\/a\u003e\n   for light metal work. (All sold separately.)\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul\u003e\n   \u003cli\u003e\n    Length of work top — 15-3\/4\" (400mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Total length — 20-7\/8\" (530mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Width of worktop — 14-3\/8\" (360mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Thickness of worktop — 1-5\/8\" (40mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Vise capacity — 4-5\/16\" (110mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Dog Holes — 3\/4\" (19mm)\n   \u003c\/li\u003e\n   \u003cli\u003e\n    Weight — 22lbs (10 kg)\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n\n \n\u003c\/body\u003e","brand":"Sjobergs Workbenches","offers":[{"title":"Default Title","offer_id":50821935530266,"sku":"115056","price":320.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/115056d.jpg?v=1768342196"},{"product_id":"veritas-inset-vise","title":"Veritas Inset Vise","description":"\u003cbody\u003e\n  \u003cp\u003e\n   The Veritas Inset Vise is a compact version of a wagon vise. It adds an adjustable dog to a workbench - allowing you to clamp your workpiece against one\n of your bench dogs. The clamping jaw of the inset vise has a 4\" range of travel, but the clamping capacity is limited only by the length of your bench\n and the placement of the dog holes. The vise slide has two mounting positions – 3-7\/8\" apart – for the vise jaw. This spacing gives full\n clamping coverage for dog holes up to 7-3\/4\" apart. When not is use, the vise jaw can be removed for a completely flat bench surface.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Jaws\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The standard Inset Vise jaw is 1\/2\" tall x 1-3\/16\" wide. It has a slot in its face that accepts a 1\/4-20 nut so you can mount a shop made accessory jaw. \nThe\n   \u003ca data-prev-url=\"\/pivoting-jaw-veritas-inset-vise.aspx\" href=\"\/products\/pivoting-jaw-veritas-inset-vise\"\u003e\n    Pivoting Jaw\n   \u003c\/a\u003e\n   (sold separately) is used for clamping odd-shaped items.  It is 1\/2\" tall and 1-1\/2\" wide.\nThe\n   \u003ca data-prev-url=\"\/low-profile-jaw-veritas-inset-vise.aspx\" href=\"\/products\/low-profile-jaw-veritas-inset-vise\"\u003e\n    Low Profile Jaw\n   \u003c\/a\u003e\n   (sold separately) is used for clamping thin items without obstruction. It can hold workpieces as thin\n as 1\/4\" and is especially useful when handplaning.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Installation\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The Inset Vise can be installed in any workbench that is at least 1-1\/4\" thick. you'll need enough room to make a mortise 10-3\/4\" long by 3\" wide\n by 29\/32\" deep. (This is the space required. The mortise is actually stepped. See the\n   \u003ca data-prev-url=\"\/library\/manuals\/veritas\/veritas-inset-vise-installation.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/veritas\/veritas-inset-vise-installation.pdf\"\u003e\n    Veritas Inset Vise Installation Manual\n   \u003c\/a\u003e\n   \u003ca name=\"moreinfo\"\u003e\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/veritas\/veritas-inset-vise-installation.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/veritas\/veritas-inset-vise-installation.pdf\"\u003e\n    Veritas Inset Vise Installation Manual\n   \u003c\/a\u003e\n\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821959942426,"sku":"177067","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/177067d.jpg?v=1768342308"},{"product_id":"pivoting-jaw-veritas-inset-vise","title":"Pivoting Jaw for the Veritas Inset Vise","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Pivoting Jaw for the Veritas Inset Vise\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Pivoting Jaw is used is used for clamping odd-shaped items in the\n   \u003ca data-prev-url=\"\/veritas-inset-vise.aspx\" href=\"\/products\/veritas-inset-vise\"\u003e\n    Veritas Inset Vise\n   \u003c\/a\u003e\n   .\n It is 1\/2\" tall and 1-1\/2\" wide.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821960073498,"sku":"177068","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/177068.jpg?v=1751686184"},{"product_id":"low-profile-jaw-veritas-inset-vise","title":"Low Profile Jaw for the Veritas Inset Vise","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Low Profile Jaw for the Veritas Inset Vise\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Low Profile Jaw is used for clamping thin items without obstruction in the\n   \u003ca data-prev-url=\"\/veritas-inset-vise.aspx\" href=\"\/products\/veritas-inset-vise\"\u003e\n    Veritas Inset Vise\n   \u003c\/a\u003e\n   . It can hold workpieces as thin\n as 1\/4\" and is especially useful when handplaning.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821960237338,"sku":"177122","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/177122-1.jpg?v=1751686186"},{"product_id":"benchcrafted-planing-stop","title":"Benchcrafted Planing Stop","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   The planing stop is a traditional solution to a common woodworking problem — \"How do you keep your workpiece from sliding across your bench when planing?\" Before the advent of the tail vise, the planing stop was the most common solution to this problem. This simple device attaches to an adjustable block set in the workbench top. The saw tooth edge sits a little above the surface of the bench so it can grip, but stay out of the way of your plane. The teeth will grip most workpieces - even bevel down mitered boards - without slipping.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Installation\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   Benchcrafted's Planing Stop mounts to an adjustable stock set in the bench top. With a snug fitting stock, you'll be able to adjust the vertical position of the planning stop with a few mallet taps. The planing stop can even be set below the surface of the bench for unobsructed access to the entire bench surface.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The planing stop attaches to the adjustable stock using two screws and double-tapped barrel nut. This system holds the stop in place through even vigorous planing, while allowing for easy removal in case you need to sharpen the stop. (You'll acheive additional resistance to rotation by mortising the planing stop slightly into the stock, but it's not required.)\n   \u003ca href=\"#moreinfo\" style=\"font-weight:bold; color:#660000;\"\u003e\n    Complete installation instructions below.\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Tail Vise or Planing Stop\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   What about a tail vise? A planing stop will not replace a tail vise, but it can hold stock for many of the same planing operations where you might use a tail vise. In many operations, the planing stop is quicker, and easier to use than a tail vise. It's a good option for a bench without a tail vise or as a complementary fixture on a bench with a tail vise.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cstrong\u003e\n    Note:\n   \u003c\/strong\u003e\n   Use a 3\/16\" Allen Wrench (Hex Bit) for the screws.\n  \u003c\/p\u003e\n  \u003cbr\u003e\n  \u003cbr\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/Planing_Stop_Installation_Instructions.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/Planing_Stop_Installation_Instructions.pdf\" target=\"_blank\"\u003e\n    Benchcrafted Planing Stop Installation Instructions\n   \u003c\/a\u003e\n  \u003c\/p\u003e\n\n\u003c\/body\u003e","brand":"Benchcrafted","offers":[{"title":"Default Title","offer_id":50821975572762,"sku":"135196","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/135196-02d.jpg?v=1768342413"},{"product_id":"benchcrafted-hi-vise-hardware","title":"Benchcrafted Hi Vise Hardware","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Benchcrafted Hi Vise Hardware\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Benchcrafted Hi-Vise is a valuable addition to any workbench. It's a smaller version of the\n   \u003ca data-prev-url=\"\/benchcrafted-classic-leg-vise.aspx\" href=\"\/products\/benchcrafted-classic-leg-vise\"\u003e\n    Benchcrafted Leg Vise\n   \u003c\/a\u003e\n   that mounts on top of your\n existing bench. It raises your workpiece so it's closer to eye level - great for detail work.  It\n also allows clamping of awkwardly shaped workpieces that couldn't be held in a standard bench vise.\n It can clamp workpieces up to 5-1\/2\" thick and up to 5-3\/8\" tall.\n  \u003c\/p\u003e\n  \u003ccenter\u003e\n   \u003cp\u003e\n    \u003cb\u003e\n     Read the Christopher Schwarz\n     \u003ca href='https:\/\/blog.lostartpress.com\/2018\/11\/27\/get-thee-an-etaux-aka-a-hivise\/\"' target=\"_blank\"\u003e\n      blog entry\n     \u003c\/a\u003e\n     on the Hi-Vise.\n    \u003c\/b\u003e\n   \u003c\/p\u003e\n  \u003c\/center\u003e\n  \u003ch5\u003e\n   Configurations\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The Hi Vise comes in two basic configurations - standard and with the mounting screw.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The standard Hi Vise can mount to your bench in two ways, depending on how you construct it. The simplest contruction\n uses a batten on the back of the vise.  It mounts to your benchtop using either bar clamps or holdfasts. If you have a\n workbench with a\n   \u003ca data-prev-url=\"\/benchcrafted-tail-vise.aspx\" href=\"\/products\/benchcrafted-tail-vise\"\u003e\n    Benchcrafted Tail Vise\n   \u003c\/a\u003e\n   , you can also make the Hi-Vise with a\n cleat designed to be clamped in the tail vise. Instructions for both configurations can be\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/benchcrafted-hi-vise-instructions-nov16.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/benchcrafted-hi-vise-instructions-nov16.pdf\" target=\"_blank\"\u003e\n    downloaded here\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Hi Vise with Mounting Screw mounts to your workbench (or any other table) without any other tools.\n  \u003c\/p\u003e\n  \u003cdiv style=\"text-align:center;\"\u003e\n   \u003cimg data-prev-url=\"\/productimages\/workbenches\/benchcrafted\/hi-vise-configurations-500-202.jpg\" src=\"https:\/\/info.highlandwoodworking.com\/productimages\/workbenches\/benchcrafted\/hi-vise-configurations-500-202.jpg\"\u003e\n   \u003cp\u003e\n    Hi Vise with mounting screw, with tail vise cleat and with benchtop batten\n   \u003c\/p\u003e\n  \u003c\/div\u003e\n  \u003ch5\u003e\n   Components\n  \u003c\/h5\u003e\n  \u003cp\u003e\n   The\n   \u003cstrong\u003e\n    Standard Hi Vise\n   \u003c\/strong\u003e\n   includes the roll threaded acme clamping screw, handle, nut,  mounting hardware,\n crisscross vise support and rubberized cork jaw pads. The\n   \u003cstrong\u003e\n    Hi Vise with Mounting Screw\n   \u003c\/strong\u003e\n   adds the mounting screw,\n nut \u0026amp; handwheel. Each kits includes everything you need except the wood.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Like all Benchcrafted hardware, the Hi Vise is designed and manufactured in the USA.\n  \u003c\/p\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n  \u003ch3 style=\" background:#D6CBB5; padding:2px 4px; font-size:13.33px;margin-top:15px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/benchcrafted\/benchcrafted-hi-vise-instructions-nov16.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/benchcrafted\/benchcrafted-hi-vise-instructions-nov16.pdf\" target=\"_blank\"\u003e\n    Complete illustrated instructions for building the Benchcrafted Hi Vise\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Benchcrafted","offers":[{"title":"Hi Vise Hardware","offer_id":50821976949018,"sku":"135250","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Hi Vise Hardware with Mounting Screw","offer_id":50821976981786,"sku":"135251","price":272.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/135250-1d.jpg?v=1768342432"},{"product_id":"tracpad-rubber-traction-square","title":"TracPad Rubber Traction Squares - Pack of 8","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    TracPad Rubber Traction Squares - Pack of 8\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   With the TracPad Kit, you can make your own bench pads! Stick a 2-3\/8\" traction rubber to each side of a wood block\n and the Tracpads pads will grab your workbench and the wood for amazing staying power. Kit includes 8 pads and 4 Blind-nails.\n Use the blind nails to raise you workpiece for finishing.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Fastcap","offers":[{"title":"Default Title","offer_id":50821984485658,"sku":"167269","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/167269-01-d.jpg?v=1768342497"},{"product_id":"kreg-in-line-clamp-kbcic","title":"Kreg In-Line Clamp - KBCIC","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Kreg In-Line Clamp - KBCIC\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Kreg In-Line Clamp is an easy-to-use clamp that holds a variety of workpieces and assemblies. The clamp stays out of the way by applying pressure from the sides instead of from above. The pushrod extends 4 3\/4\" and the contoured dial makes for easy adjustments. The Kreg In-Line Clamp provides up to 250 pounds of clamping pressure and works on any bench with 3\/4\" (19mm) holes.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kreg Tool","offers":[{"title":"Default Title","offer_id":50821987926298,"sku":"124152","price":26.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/124152d.jpg?v=1768342527"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/collections\/WorkbenchandHardwaredrawing.jpg?v=1774112841","url":"https:\/\/www.highlandwoodworking.com\/collections\/workbenches-hardware.oembed?page=4","provider":"Highland Woodworking","version":"1.0","type":"link"}