{"title":"Workshop","description":"","products":[{"product_id":"tite-markmarkinggauge","title":"Tite-Mark Marking Gauge","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   The Tite-Mark Marking Gauge is a beautifully made gauge featuring dial-in micro adjustability for fabulously easy precision setting. Every detail has been attended to with care.\n The file hard (Rc60) marking blade is round, but it doesn't rotate during use; it slices with or across the grain as cleanly as a knife.  The lockable brass head and tail, fitted\n with spring-loaded locking screws and a nylon tension screw as well, slice along a groove milled in the beam to keep them from rotating during micro-adjustment.  The stout knurled\n brass adjustment nut is 1\" wide for easy fingertip access.  The head, 1-5\/8\" in diameter, is fitted with a countersink that houses the blade safely out of harm's way when not in use.\n It's a lovely tool, and beautifully functional, too.\n  \u003c\/p\u003e\n\u003cp\u003eThe blade attaches with a 5\/64\" hex wrench (not included).\u003c\/p\u003e \n\u003c\/body\u003e","brand":"Glen-Drake","offers":[{"title":"Default Title","offer_id":50821263491354,"sku":"455201","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/455201-02d.jpg?v=1770138455"},{"product_id":"longrangerremotecontrolextratransmitterunit","title":"Long Ranger Remote Control Extra Transmitter Unit","description":"\u003cp\u003eExtra transmitter unit for the Long Ranger Type 3 Remote Control.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003e PLEASE NOTE: Transmitter will not work with Type II \u003c\/b\u003e\u003c\/p\u003e","brand":"PSI","offers":[{"title":"Default Title","offer_id":50821263786266,"sku":"184953","price":31.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/184953.jpg?v=1767045830"},{"product_id":"dmt-dia-sharp-115in-dia-sharp-bench-stone","title":"DMT 11.5 inch Dia-Sharp Bench Stone","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    DMT 11.5 inch Dia-Sharp Bench Stone\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   These Dia-Sharp stones are 11-1\/2\" long by 2-1\/2\" wide on 3\/8\" solid steel plates. Monocrystalline diamond abrasive\n is bonded to the stones' solid surface. The heavy steel plates are precisely flat and guaranteed to stay that way.  They are\n excellent for flattening and polishing the backs of chisels and plane irons, and of course they provide a truly sharp edge.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   They may be used dry, requiring an occasional scrub with household abrasive cleanser to unclog the surface.  Whenever possible,\n liberally wet the surface with water while you work, letting a combination of surface tension and hydraulic action keep swarf\n accumulation from slowing you down.  Each stone comes with a set of non-skid ribber feet.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"DMT","offers":[{"title":"X-Coarse (60 micron \/ 220 mesh)","offer_id":50821263884570,"sku":"141058","price":94.5,"currency_code":"USD","in_stock":true},{"title":"Coarse (45 micron \/ 325 mesh)","offer_id":50821263917338,"sku":"448042","price":94.5,"currency_code":"USD","in_stock":true},{"title":"Fine (25 micron \/ 600 mesh)","offer_id":50821263950106,"sku":"448043","price":94.5,"currency_code":"USD","in_stock":true},{"title":"X-Fine (9 micron \/ 1200 mesh)","offer_id":50821263982874,"sku":"448044","price":94.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/dmt_20dia-sharp-d.jpg?v=1767043235"},{"product_id":"veritasbeamcompassheads","title":"Veritas Beam Compass Heads","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Beam Compass Heads\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Veritas trammel set's extremely sharp points let you lay out and scribe arcs and circles as precisely as you might ever wish.  One point is eccentrically ground, providing 1\/8\" micro-adjustment range by simply rotating the point.  The heads clamp on any material between 5\/8\" \u0026amp; 3\/4\" thick.  A trapped pin under each clamp knob insures that the heads stay exactly where you put them on the beam.  Either pin can be replaced with a pencil (included).  Black anodized clamp heads \u0026amp; brass lock knobs make the set as elegant as it is precise.  A snap-closed storage case is included.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821264671002,"sku":"467025","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/467025d.jpg?v=1767043238"},{"product_id":"camelliaoil100ml","title":"Camellia Oil - 100ml","description":"\u003cp\u003e\u003cb\u003e Camellia Oil - 100ml \u003c\/b\u003e\u003c\/p\u003e\n\n\u003cp\u003eCamellia oil is a favorite traditional tool treatment among both samurai and woodworkers, used both for preventing corrosion and for easing chisels and knives through their work. Light and nearly odorless, the oil is non-staining and doesn't affect glue-up. Use a light wipe of Camellia oil on all your steel tools to keep them clean \u0026amp; shiny. 100ml\/3.3 fl.oz.\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e This is a special blend oil, made with natural camellia and liquid paraffin. It is non-toxic and non-allergenic.\u003c\/i\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"tableMasterEmbed\" data-id=\"2xdrx75LOD\"\u003e\u003c\/div\u003e\n","brand":"MZT","offers":[{"title":"Default Title","offer_id":50821481333018,"sku":"456460","price":9.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/456460d.jpg?v=1768338465"},{"product_id":"veritasjointeredger","title":"Veritas Jointer\/Edger","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Jointer\/Edger\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This simple jig holds a\n   \u003ca data-prev-url=\"\/6millbastardfile.aspx\" href=\"\/products\/6millbastardfile\"\u003e\n    6\", 8\" or 10\" mill bastard file\n   \u003c\/a\u003e\n   (file not included)\n precisely perpendicular to a fence face, making it a snap to file scraper edges square or to joint the teeth on a handsaw properly\n before resharpening. A second fence tilted at 45° is for sharpening the blades of handled scrapers such as the Stanley No. 80.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821483659546,"sku":"422605","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/022605.jpg?v=1751675147"},{"product_id":"japanesemarkingknife","title":"Japanese Marking Knife","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Japanese Marking Knife\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This simple tool is remarkably comfortable \u0026amp; well-balanced. The laminated steel blade is beveled on one side only, so the cutting edge lies flush against a square, and stands vertically for clean \u0026amp; accurate marking. The back of the blade is hollowed to speed the honing process, incidentally providing a nice fit for the right thumb.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"MZT","offers":[{"title":"Default Title","offer_id":50821487001882,"sku":"466401","price":23.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/066401.jpg?v=1751675245"},{"product_id":"japanese3featherfile","title":"Japanese Feather Files","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Japanese Feather Files\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Feather-shaped taper files for sharpening hand saws with Japanese-style teeth. Files come without handles.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Sizes\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-3px;margin-left:-15px;\"\u003e\n   \u003cli style=\"font-weight:bold;\"\u003e\n    #3 Feather File\n   \u003c\/li\u003e\n   \u003cul style=\"margin-top:-3px;margin-left:-15px;\"\u003e\n    \u003cli\u003e\n     75mm (3\") cutting length\n    \u003c\/li\u003e\n    \u003cli\u003e\n     110mm (4-5\/16\") overall length\n    \u003c\/li\u003e\n    \u003cli\u003e\n     17mm (15\/16\") wide\n    \u003c\/li\u003e\n    \u003cli\u003e\n     2.5mm (3\/32\") thick\n    \u003c\/li\u003e\n    \u003cli\u003e\n     For sharpening saws 16-24 points per inch\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Uses our\n     \u003ca data-prev-url=\"\/japanesefeatherfilehandle.aspx\" href=\"\/products\/japanesefeatherfilehandle\"\u003e\n      Small File Handle\n     \u003c\/a\u003e\n     ,\n     \u003ca data-prev-url=\"\/wire-bound-ferrule-wooden-file-handle.aspx\" href=\"\/products\/wire-bound-ferrule-wooden-file-handle\"\u003e\n      #1 or #2 Wire Bound File Handle\n     \u003c\/a\u003e\n     or\n     \u003ca data-prev-url=\"\/lutz-long-ferrule-wooden-file-handle.aspx\" href=\"\/products\/lutz-long-ferrule-wooden-file-handle\"\u003e\n      #2 Long Ferrule File Handle\n     \u003c\/a\u003e\n     \u003c!-- not a good fit with Nicholson file handles--\u003e\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cli style=\"font-weight:bold;\"\u003e\n    #4 Feather File\n   \u003c\/li\u003e\n   \u003cul style=\"margin-top:-3px;margin-left:-15px;\"\u003e\n    \u003cli\u003e\n     100mm (4\") cutting length\n    \u003c\/li\u003e\n    \u003cli\u003e\n     140mm (5-1\/2\") overall length\n    \u003c\/li\u003e\n    \u003cli\u003e\n     21mm (13\/16\") wide\n    \u003c\/li\u003e\n    \u003cli\u003e\n     3mm (1\/8\") thick\n    \u003c\/li\u003e\n    \u003cli\u003e\n     For sharpening saws 12-17 points per inch\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Uses our\n     \u003ca data-prev-url=\"\/nicholson-wooden-file-handle.aspx\" href=\"\/products\/nicholson-wooden-file-handle\"\u003e\n      Nicholson Type A file handle\n     \u003c\/a\u003e\n     or\n     \u003ca data-prev-url=\"\/wire-bound-ferrule-wooden-file-handle.aspx\" href=\"\/products\/wire-bound-ferrule-wooden-file-handle\"\u003e\n      #3 Wire Bound File Handle\n     \u003c\/a\u003e\n     \u003c!-- not a good fit with small file handle or Long Ferrule File Handles--\u003e\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n   \u003cli style=\"font-weight:bold;\"\u003e\n    #5 Feather File\n   \u003c\/li\u003e\n   \u003cul style=\"margin-top:-3px;margin-left:-15px;\"\u003e\n    \u003cli\u003e\n     125mm (5\") cutting length\n    \u003c\/li\u003e\n    \u003cli\u003e\n     170mm (6-11\/16\") overall length\n    \u003c\/li\u003e\n    \u003cli\u003e\n     24mm (15\/16\") wide\n    \u003c\/li\u003e\n    \u003cli\u003e\n     4mm (3\/16\") thick\n    \u003c\/li\u003e\n    \u003cli\u003e\n     For sharpening saws 6-14 points per inch\n    \u003c\/li\u003e\n    \u003cli\u003e\n     Uses our\n     \u003ca data-prev-url=\"\/nicholson-wooden-file-handle.aspx\" href=\"\/products\/nicholson-wooden-file-handle\"\u003e\n      Nicholson Type B or Type C file handle\n     \u003c\/a\u003e\n     ,\n     \u003ca data-prev-url=\"\/wire-bound-ferrule-wooden-file-handle.aspx\" href=\"\/products\/wire-bound-ferrule-wooden-file-handle\"\u003e\n      #3 Wire Bound File Handle\n     \u003c\/a\u003e\n     or\n     \u003ca data-prev-url=\"\/lutz-long-ferrule-wooden-file-handle.aspx\" href=\"\/products\/lutz-long-ferrule-wooden-file-handle\"\u003e\n      #3 Long Ferrule File Handle\n     \u003c\/a\u003e\n     \u003c!-- not a good fit with small file handle--\u003e\n    \u003c\/li\u003e\n   \u003c\/ul\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003e\n   Some modern Japanese saws have hardened teeth and cannot be re-sharpened. If your saw has black teeth, it likely cannot be re-sharpened.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"MZT","offers":[{"title":"#3 File","offer_id":50821487067418,"sku":"456450","price":16.0,"currency_code":"USD","in_stock":true},{"title":"#4 File","offer_id":50821487100186,"sku":"456451","price":18.0,"currency_code":"USD","in_stock":true},{"title":"#5 File","offer_id":50821487132954,"sku":"456452","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/056450.jpg?v=1751675247"},{"product_id":"japanesefeatherfilehandle","title":"Small File Handle","description":"\u003cp\u003eFits small files including saw sharpening taper files and Japanese feather files.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul style=\"margin-top: -3px;\"\u003e\n\u003cli style=\"font-weight: bold;\"\u003eNo. 1\u003c\/li\u003e\n\u003cul style=\"margin-top: -3px;\"\u003e\n\u003cli\u003eLength — 3-1\/2\"\u003c\/li\u003e\n\u003cli\u003eDiameter — 7\/8\"\u003c\/li\u003e\n\u003cli\u003eBore — 5\/32\"\u003c\/li\u003e\n\u003cli\u003eBore Depth — 1-3\/4\"\u003c\/li\u003e\n\u003cli\u003eFits — 3\" to 6\" files\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Mercer","offers":[{"title":"Default Title","offer_id":50821487198490,"sku":"475622","price":7.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/475622d.jpg?v=1768339987"},{"product_id":"starrettcombinationsquare12","title":"Starrett Combination Square","description":"\u003cp\u003eThe Starrett combination square is one of the most versatile and useful marking and measuring tools in the woodworking shop.\n Carefully machined and manufactured in the USA since 1878, Starrett squares are known for their accuracy, reliability, precision\n and long service life. Dead accurate like a high quality engineer's square, and far more versatile and precise than a try square,\n a Starrett combination square has a head made from durable cast iron or hardened steel. The rules (blades) are hardened, tempered\n steel with photo-engraved graduations that will never wear out and have a non-glare satin chrome finish. Often copied, but rarely\n duplicated, a Starrett combination square will be a tool you will rely on year after year for accurate joint layout, checking your\n work for perfect square \u0026amp; 45 degree angles, and for accurately setting up your woodworking machines.\u003c\/p\u003e\n \n\u003ch5\u003eStarrett Combination Square Heads\u003c\/h5\u003e\n\u003cp\u003eThe \u003cb\u003e standard combination square head \u003c\/b\u003e has a 90° face and a 45° face. It is used for check square or 45° on everything from\n table saw blades to jointed edges of boards.It includes a built-in spirit level and a hardened steel steel scribing pin. The\n \u003cb\u003e center head \u003c\/b\u003e is used to find the center of round workpieces (dowels, small table tops, etc.) The \u003cb\u003e protractor head \u003c\/b\u003e\n is used to precisely measure angles.\u003c\/p\u003e\n \n\u003cp\u003eAll three heads come in cast iron with a black wrinkle finish. The standard head and center head are also available in hardened \nsteel with a glossy black finish. Hardened steel heads are typically used by metal workers.\u003c\/p\u003e\n\n\u003cp\u003eThe heart of the combination square is the locking bolt. All three types of head use Starrett's precise, reversible and reliable\n locking bolt. It locks the blade in place with just a few turns and keeps the blade square without slipping through many years of\n service.\u003c\/p\u003e\n \n\u003ch5\u003eStarrett Combination Square Blades\u003c\/h5\u003e\n\u003cp\u003eAll of our Starrett combination squares have hardened steel blades with a satin chrome finish. The satin chrome finish reduces\n glare and makes the rule easier to read.\u003c\/p\u003e\n \n\u003cp\u003eOur inch graduated Starrett combination squares use the # \u003cb\u003e 4R \u003c\/b\u003e inch graduation pattern on their blades. One side of the\n blade has quick reading 64ths \u0026amp; 32nds. The other side of the blade has 16ths and 8ths. The blade can be mounted in the square\n in all four positions so that your preferred scale is in the best position.\u003c\/p\u003e\n \n\u003cp\u003eOur metric-inch graduated Starrett combination squares use the #35 graduation pattern. They have 1\/2mm and 1mm graduations on\n both sides of the blade.\u003c\/p\u003e\n \n\u003ch5\u003eCombination Square Sets\u003c\/h5\u003e\n\u003cp\u003eStandard combination squares come with the blade (rule) and the standard square head. Combination square sets add the\n \u003ca data-prev-url=\"\/starrettcenterheadfor12square.aspx\" href=\"\/products\/starrettcenterheadfor12square\"\u003e center head \u003c\/a\u003e and \u003ca data-prev-url=\"\/starrettprotractorheadfor12square.aspx\" href=\"\/products\/starrettprotractorheadfor12square\"\u003e protractor head \u003c\/a\u003e and come in a fitted plastic case.\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"chart\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ctable class=\"hwpt\"\u003e\n\n\u003ctbody\u003e\n\t\u003ctr\u003e\n\t\t\u003cth\u003e\u003c!--image--\u003e\u003c\/th\u003e\n\t\t\u003cth\u003eSquare\u003c\/th\u003e\n\t\t\u003cth\u003eStarrett #\u003c\/th\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/productimages\/markingmeasuring\/starrett\/461568-50.jpg\" height=\"100\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461568.jpg?v=1764726441\" width=\"100\"\u003e\u003c\/td\u003e\n\t\t\u003ctd\u003e4\" Combination Square \u003cbr\u003eCast Iron Head w\/ black wrinkle finish \u003cbr\u003eRule is 5\/8\" wide.\u003c\/td\u003e\n\t\t\u003ctd\u003eC11H-4-4R\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/productimages\/markingmeasuring\/starrett\/461520-50.jpg\" height=\"100\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461520d.jpg?v=1768339993\" width=\"100\"\u003e\u003c\/td\u003e\n\t\t\u003ctd\u003e6\" Combination Square \u003cbr\u003eCast Iron Head w\/ black wrinkle finish \u003cbr\u003eRule is 3\/4\" wide.\u003c\/td\u003e\n\t\t\u003ctd\u003eC11H-6-4R\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/productimages\/markingmeasuring\/starrett\/461521-50.jpg\" height=\"100\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461521d.jpg?v=1768339993\" width=\"100\"\u003e\u003c\/td\u003e\n\t\t\u003ctd\u003e12\" Combination Square \u003cbr\u003eCast Iron Head w\/ black wrinkle finish \u003cbr\u003eRule is 1\" wide.\u003c\/td\u003e\n\t\t\u003ctd\u003eC11H-12-4R\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/productimages\/markingmeasuring\/starrett\/461561-50.jpg\" height=\"100\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461561d.jpg?v=1768339993\" width=\"100\"\u003e\u003c\/td\u003e\n\t\t\u003ctd\u003e12\" Combination Square Set \u003cbr\u003eCast Iron Head w\/ black wrinkle finish \u003cbr\u003eIncludes \u003ca data-prev-url=\"\/plasticcaseforstarrettcombinationsquare.aspx\" href=\"\/products\/plasticcaseforstarrettcombinationsquare\" style=\"color: #660000; font-size: 1.0em;\"\u003e fitted plastic case \u003c\/a\u003e\n\t\t\u003c\/td\u003e\n\t\t\u003ctd\u003eC435-12-4R\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/productimages\/markingmeasuring\/starrett\/161028-50.jpg\" height=\"100\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/161028d.jpg?v=1768339993\" width=\"100\"\u003e\u003c\/td\u003e\n\t\t\u003ctd\u003e12\" Combination Square Set \u003cbr\u003eHardened Steel Head w\/ gloss black finish \u003cspan style=\"color: red;\"\u003e ♦ \u003c\/span\u003e \u003cbr\u003eIncludes \u003ca data-prev-url=\"\/plasticcaseforstarrettcombinationsquare.aspx\" href=\"\/products\/plasticcaseforstarrettcombinationsquare\" style=\"color: #660000; font-size: 1.0em;\"\u003e fitted plastic case \u003c\/a\u003e\n\t\t\u003c\/td\u003e\n\t\t\u003ctd\u003eC434-12-4R\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/productimages\/markingmeasuring\/starrett\/461547-50.jpg\" height=\"100\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461547d.jpg?v=1768339993\" width=\"100\"\u003e\u003c\/td\u003e\n\t\t\u003ctd\u003e150mm Combination Square \u003cbr\u003eCast Iron Head w\/ black wrinkle finish\u003c\/td\u003e\n\t\t\u003ctd\u003eC11MH-150\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/productimages\/markingmeasuring\/starrett\/461546-01.jpg\" height=\"100\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461546-01d.jpg?v=1768339993\" width=\"100\"\u003e\u003c\/td\u003e\n\t\t\u003ctd\u003e150mm Combination Square \u003cbr\u003eHardened Steel Head w\/ gloss black finish\u003c\/td\u003e\n\t\t\u003ctd\u003eC33MHC-150\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/productimages\/markingmeasuring\/starrett\/161088-50.jpg\" height=\"100\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/161088d.jpg?v=1768339993\" width=\"100\"\u003e\u003c\/td\u003e\n\t\t\u003ctd\u003e300mm Combination Square Set \u003cbr\u003eCast Iron Head w\/ black wrinkle finish \u003cbr\u003eIncludes \u003ca data-prev-url=\"\/plasticcaseforstarrettcombinationsquare.aspx\" href=\"\/products\/plasticcaseforstarrettcombinationsquare\" style=\"color: #660000; font-size: 1.0em;\"\u003e fitted plastic case \u003c\/a\u003e\n\t\t\u003c\/td\u003e\n\t\t\u003ctd\u003eC435M-300\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/productimages\/markingmeasuring\/starrett\/161071-50.jpg\" height=\"100\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/161071d.jpg?v=1768339993\" width=\"100\"\u003e\u003c\/td\u003e\n\t\t\u003ctd\u003e300mm Combination Square Set \u003cbr\u003eHardened Steel Head w\/ gloss black finish \u003cspan style=\"color: red;\"\u003e ♦ \u003c\/span\u003e \u003cbr\u003eIncludes \u003ca data-prev-url=\"\/plasticcaseforstarrettcombinationsquare.aspx\" href=\"\/products\/plasticcaseforstarrettcombinationsquare\" style=\"color: #660000; font-size: 1.0em;\"\u003e fitted plastic case \u003c\/a\u003e\n\t\t\u003c\/td\u003e\n\t\t\u003ctd\u003eC434M-300\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd class=\"imgcell\"\u003e\u003cimg data-prev-url=\"\/productimages\/markingmeasuring\/starrett\/161035-50.jpg\" height=\"100\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/161035d.jpg?v=1768339993\" width=\"100\"\u003e\u003c\/td\u003e\n\t\t\u003ctd\u003e300mm Combination Square \u003cbr\u003eCast Iron Head w\/ black wrinkle finish\u003c\/td\u003e\n\t\t\u003ctd\u003eC11MH-300\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\t\u003ctr\u003e\n\t\t\u003ctd colspan=\"5\"\u003e\n\t\t\u003cspan style=\"color: red;\"\u003e ♦ \u003c\/span\u003e Please Note: While the square head and center head included with these sets are hardened steel, the protractor head is cast iron.\u003c\/td\u003e\n\t\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e\n\u003cp style=\"margin: -2px 0px 10px 0px;\"\u003e\u003ca data-prev-url=\"\/library\/manuals\/starrett\/starrett-combination-square-instructions.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/starrett\/starrett-combination-square-instructions.pdf\"\u003e Starrett Combination Square: Introduction, Assembly \u0026amp; Applications \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/woodworking-tips-1411nov\/starrett-combination-square-tool-review.html\" href=\"https:\/\/info.highlandwoodworking.com\/woodworking-tips-1411nov\/starrett-combination-square-tool-review.html\" target=\"_blank\"\u003e Jeffrey Fleisher's Starrett Combination Square Tool Review \u003c\/a\u003e .\u003c\/p\u003e","brand":"L. S. Starrett","offers":[{"title":"4 inch \/ Square Head \/ Cast Iron - Black Wrinkle","offer_id":50821487362330,"sku":"461568","price":140.0,"currency_code":"USD","in_stock":true},{"title":"6 inch \/ Square Head \/ Cast Iron - Black Wrinkle","offer_id":50821487395098,"sku":"461520","price":156.0,"currency_code":"USD","in_stock":true},{"title":"12 inch \/ Set of Three Heads \/ Cast Iron - Black Wrinkle","offer_id":50821487427866,"sku":"461561","price":585.0,"currency_code":"USD","in_stock":true},{"title":"12 inch \/ Set of Three Heads \/ Hardened Steel - Gloss Black","offer_id":50821487460634,"sku":"161028","price":500.0,"currency_code":"USD","in_stock":true},{"title":"12 inch \/ Square Head \/ Cast Iron - Black Wrinkle","offer_id":50821487493402,"sku":"461521","price":165.0,"currency_code":"USD","in_stock":true},{"title":"150mm \/ Square Head \/ Cast Iron - Black Wrinkle","offer_id":50821487526170,"sku":"461547","price":173.0,"currency_code":"USD","in_stock":true},{"title":"150mm \/ Set of Two Heads \/ Hardened Steel - Gloss Black","offer_id":50821487558938,"sku":"461546","price":309.0,"currency_code":"USD","in_stock":true},{"title":"300mm \/ Set of Three Heads \/ Cast Iron - Black Wrinkle","offer_id":50821487591706,"sku":"161088","price":455.0,"currency_code":"USD","in_stock":true},{"title":"300mm \/ Set of Three Heads \/ Hardened Steel - Gloss Black","offer_id":50821487624474,"sku":"161071","price":600.0,"currency_code":"USD","in_stock":true},{"title":"300mm \/ Square Head \/ Cast Iron - Black Wrinkle","offer_id":50821487657242,"sku":"161035","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461521d.jpg?v=1768339993"},{"product_id":"starrett24bladefor12combinationsquare","title":"Starrett 24\" Blade for 12\" Combination Square","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Starrett 24\" Blade for 12\" Combination Square\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This optional 24\" Blade for Starrett 12\" Combination Square gives you Starrett accuracy on stock up to 22\" wide,\n and it makes a fine straightedge, too.  The blade is 1\" wide and has a satin chrome finish.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This blade uses #\n   \u003cb\u003e\n    4R\n   \u003c\/b\u003e\n   inch graduation pattern. One side of the blade has quick reading 64ths \u0026amp; 32nds. The other side\nhas 16ths and 8ths. It can be mounted in the square in all four positions so that your preferred scale is in the best position.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Starrett 24\" blade only, 12\" Combination Square NOT included.\n  \u003c\/p\u003e\n  \u003cp style=\"font-style:italic;\"\u003e\n   This picture above is a representation of the graduation pattern on this blade. It is not a picture of the actual blade.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"L. S. Starrett","offers":[{"title":"Default Title","offer_id":50821487722778,"sku":"461524","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/starrett-4r-d_c70007ba-3c11-43f5-ac91-4b96513688c7.jpg?v=1768339993"},{"product_id":"starrettcenterheadfor12square","title":"Starrett Center Head for 12\" Square","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Starrett Center Head for 12\" Square\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Opitional Center Head accessory for Starrett 12\" Square.  Converts the Starrett 12\"\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/starrettcombinationsquare12.aspx\" href=\"\/products\/starrettcombinationsquare12\"\u003e\n    combination square\n   \u003c\/a\u003e\n   into a center finder for round or square stock.  Starrett Center Head only.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 12\" combination square and blade are NOT included.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"L. S. Starrett","offers":[{"title":"Default Title","offer_id":50821487788314,"sku":"461522","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461522d.jpg?v=1768339994"},{"product_id":"starrettprotractorheadfor12square","title":"Starrett Protractor Head for 12\" Square","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Starrett Protractor Head for 12\" Square\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Starrett's optional Protractor Head for their 12\"\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/starrettcombinationsquare12.aspx\" href=\"\/products\/starrettcombinationsquare12\"\u003e\n    combination square\n   \u003c\/a\u003e\n   converts the 12\" Square into a large 180° reversible protractor.  This is the Protractor Head only.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 12\" combination square and blade are NOT included.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"L. S. Starrett","offers":[{"title":"Default Title","offer_id":50821487853850,"sku":"461523","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461523d.jpg?v=1768339995"},{"product_id":"starrettstraightedge36","title":"Starrett Straightedge - 12 to 72 inches","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Starrett Straightedge\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Starrett's classic straightedge tool is pure function: no bevels, no graduations, just finely milled \u0026amp; finished reference edges.\n Starrett Straightedges are all milled straight to within 0.0002 inch per foot of length and parallel to within 0.0004 inch per foot of\n length. Arrows mark suspension points by which the tool should be supported (if needed) to minimize deflection due to its length and weight.\n  \u003c\/p\u003e\n  \u003ch5\u003e\n   Specifications\n  \u003c\/h5\u003e\n  \u003cul style=\"margin-top:-2px;\"\u003e\n   \u003cli\u003e\n    12\" - 12\" long, 1-13\/32\" wide and 11\/64\" thick.\n   \u003c\/li\u003e\n   \u003c!--\u003cli\u003e18\" - 18\" long, 1-13\/32\" wide and 11\/64\" thick. \u003c\/li\u003e--\u003e\n   \u003cli\u003e\n    24\" - 24\" long, 1-13\/32\" wide and 11\/64\" thick.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    36\" - 36\" long, 2-13\/32\" wide and  7\/32\" thick.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    48\" - 48\" long, 2-13\/32\" wide and  7\/32\" thick.\n   \u003c\/li\u003e\n   \u003cli\u003e\n    72\" - 72\" long, 3-5\/32\" wide and  9\/32\" thick.\n    \u003cbr\u003e\n    \u003c!--\u003cb\u003e(72\" is a Special Order Item - allow approximately 3 weeks for delivery.)\u003c\/b\u003e \u003c\/li\u003e--\u003e\n   \u003c\/li\u003e\n  \u003c\/ul\u003e\n \n\u003c\/body\u003e","brand":"L. S. Starrett","offers":[{"title":"12 inch","offer_id":50821487919386,"sku":"461514","price":99.0,"currency_code":"USD","in_stock":true},{"title":"24 inch","offer_id":50821487952154,"sku":"461528","price":149.0,"currency_code":"USD","in_stock":true},{"title":"36 inch","offer_id":50821487984922,"sku":"461529","price":355.0,"currency_code":"USD","in_stock":true},{"title":"48 inch","offer_id":50821488017690,"sku":"461587","price":535.0,"currency_code":"USD","in_stock":true},{"title":"72 inch (Special Order)","offer_id":50821488050458,"sku":"161003","price":939.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461514d.jpg?v=1768339996"},{"product_id":"starrettdoublesquare4","title":"Starrett Double Square","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Starrett Double Square\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Given their guaranteed accuracy, these delightfully handy squares offer a versatile alternative to fixed steel squares.\n They're accurate both inside \u0026amp; out, and their adjustable graduated blades (8ths, 16ths, 32nds \u0026amp; 64ths) also enable\n them to check square in places too tight for fixed blades, perform measuring chores and be set precisely for scribing or\n marking set depths.  6 inch size has a spirit level in the handle.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"L. S. Starrett","offers":[{"title":"4 inch","offer_id":50821488115994,"sku":"461525","price":122.0,"currency_code":"USD","in_stock":true},{"title":"6 inch","offer_id":50821488148762,"sku":"461526","price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461525d.jpg?v=1768339997"},{"product_id":"starrettprecisionrulewithendgrads6","title":"Starrett C604RE-6 Precision Rule with End Grads - 6 inch","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Starrett Precision Rule with End Grads - 6 inch\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Starrett's black-filled graduation lines are so uniform that each 1\/64 inch line stands out clearly between its neighbors.\n The rule is graduated in English measure on both sides; the first side with 64ths on one edge and 32nds on the other, the\n second side with 16ths and 8ths.  The 6 inch rule is also graduated vertically in 32nds on both ends of one side, a real\n help for measuring edges and rabbets in tight places and for setting up router bits or saw blades for joinery and grooving.\n The 6 inch rule is 3\/4 inch wide.  It is constructed of 3\/64 inch thick, slightly flexible spring-tempered steel with a\n multi-plate satin chrome finish.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Starrett # C604RE-6\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"L. S. Starrett","offers":[{"title":"Default Title","offer_id":50821488214298,"sku":"461511","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461511d.jpg?v=1768339998"},{"product_id":"starrettprecisionrule12","title":"Starrett Precision Rule - 12 inch","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Starrett Precision Rule - 12 inch\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Starrett's black-filled graduation lines are so uniform that each 1\/64 inch line stands out clearly between its neighbors.  The rule is graduated in English measure on both sides; the first side with 64ths on one edge and 32nds on the other, the second side with 16ths and 8ths.  The 12 inch rule is 1 inch wide, it is constructed of 3\/64 inch thick, slightly flexible spring-tempered steel with a multi-plate satin chrome finish.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"L. S. Starrett","offers":[{"title":"Default Title","offer_id":50821488279834,"sku":"461512","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461512d.jpg?v=1768339999"},{"product_id":"starrettprecisionrule24","title":"Starrett Precision Rule - 24 inch","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Starrett Precision Rule - 24 inch\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Starrett's black-filled graduation lines are so uniform that each 1\/64 inch line stands out clearly between its neighbors.  The rule is graduated in English measure on both sides; the first side with 64ths on one edge and 32nds on the other, the second side with 16ths and 8ths.  The 24 inch rule is 1-1\/4 inch wide, it is constructed of 3\/64 inch thick, slightly flexible spring-tempered steel with a multi-plate satin chrome finish.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"L. S. Starrett","offers":[{"title":"Default Title","offer_id":50821488345370,"sku":"461513","price":178.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461513d.jpg?v=1768340000"},{"product_id":"veritasbargaugeheads","title":"Veritas Bar Gauge Heads","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Veritas Bar Gauge Heads\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This simple hardware lets you make a surprisingly useful measuring tool.  It's nothing fancier than a wooden beam with\n adjustable length; you'll use it for very accurate measurement transfer, eliminating memory and arithmetic errors, and\n for comparing diagonal measurements when verifying squareness of drawers, carcasses \u0026amp; frames.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cspan style=\"font-weight:bold;\"\u003e\n    You supply the wood\n   \u003c\/span\u003e\n   :  two 1\/4\" x 3\/4\" pieces in the length that suits your work.  Remember, any time you can transfer\n a dimension directly, without converting it into numbers, you avoid a primary source of error. This set of Bar Gauge\n Heads let you create your very own, adjustable story sticks.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821488410906,"sku":"437014","price":18.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/437014-01d.jpg?v=1768340001"},{"product_id":"veritaswheelmarkinggauge","title":"Veritas Wheel Marking Gauge","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Wheel Marking Gauge\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The cutting wheel on these Veritas gauges starts and marks smoothly, without having to worry about attack angle and without\n tearing during cross-grain marking.  The hardened steel wheel is ground sharp with the bevel on the inside, so it naturally pulls\n the gauge tight against your stock and resists following uncooperative grain.  Unmarked bar.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821488476442,"sku":"467010","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/467010d.jpg?v=1768340002"},{"product_id":"veritastransferscribe","title":"Veritas Transfer Scribe","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Transfer Scribe\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This excellent scribing tool makes quick, accurate work of fitting cabinet trim, backsplash and mouldings to out-of-flat walls \u0026amp; ceilings.  It lets you cope moulding corners perfectly, and also works for clean, tight-fitting log joinery.  The double-ended steel stylus has a blunt offset tracing point \u0026amp; a sharp compass point.  Two leveling vials assure consistent accuracy.  Opens up to 12\".\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821488541978,"sku":"467014","price":164.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/067014.jpg?v=1751675286"},{"product_id":"pencilcompass","title":"Pencil Compass","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Pencil Compass\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   A Pencil Compass is a simple and inexpensive alternative to hunting for the right size can for marking circles \u0026amp; arcs. Fine-thread adjustment nut, knurled pivot and spring tensioned hinge allow pinpoint accuracy to 8\" diameter.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"General Tools","offers":[{"title":"Default Title","offer_id":50821488607514,"sku":"463013","price":8.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/463013d.jpg?v=1768340003"},{"product_id":"starrettmachinistsbluedye4oz","title":"Starrett Machinist's Blue Dye - 4 oz.","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Starrett Machinist's Blue Dye - 4 oz.\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Layout dye for when you're fitting tool parts precisely, making your own hardware, or working on castings or formed metal, this opaque, fast-drying dye will give you the reference surface you need.  Find out exactly where parts make contact (and where they don't), or provide a high-contrast background for clean, lightly scribed layout marks.  Washes off with alcohol or lacquer thinner.\n  \u003c\/p\u003e\n  \u003ca data-prev-url=\"https:\/\/www.highlandwoodworking.com\/msds\/461531 Starrett Machinist Layout Dye 4oz.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/msds\/461531%20Starrett%20Machinist%20Layout%20Dye%204oz.pdf\" target=\"_blank\"\u003e\n   Material Safety Data Sheet for Starrett Machinist Layout Dye 4oz\n  \u003c\/a\u003e\n  \u003cbr\u003e\n \n\u003c\/body\u003e","brand":"L. S. Starrett","offers":[{"title":"Default Title","offer_id":50821488673050,"sku":"461531","price":27.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461531d.jpg?v=1768340004"},{"product_id":"starrettmachinistsbluedye115ozaerosol","title":"Starrett Machinist's Blue Dye - 11.5 oz. Aerosol","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Starrett Machinist's Blue Dye - 11.5 oz. Aerosol\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   When you're fitting tool parts precisely, making your own hardware, or working on castings or formed metal, this opaque, fast-drying dye will give you the reference surface you need.  Find out exactly where parts make contact (and where they don't), or provide a high-contrast background for clean, lightly scribed layout marks.  Washes off with alcohol or lacquer thinner.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"L. S. Starrett","offers":[{"title":"Default Title","offer_id":50821488738586,"sku":"461565","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461565d.jpg?v=1768340005"},{"product_id":"onewaymulti-gaugedialindicator","title":"Oneway Multi-Gauge Dial Indicator","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Oneway Multi-Gauge Dial Indicator\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Oneway's Multi Gauge Dial Indicator uses a heavy, precisely machined cast iron base as its reference plane.  Unlike magnetic-base indicators, it works on cast aluminum as well as on steel tool surfaces.  The 1-1\/4\" thick frame serves as an accurate square for fence \u0026amp; blade set-up.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Oneway","offers":[{"title":"Default Title","offer_id":50821488804122,"sku":"150101","price":115.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/2289.jpg?v=1751675296"},{"product_id":"incramarkingrule","title":"Incra Marking Rule","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Incra Marking Rules\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Incra's unique rules are equipped with a series of narrow slots and tiny holes that locate your .5mm mechanical pencil lead or the point of your scratch awl at exactly the measurement you choose.  Your awl point can't skate around, and your pencil line will be straight and perpendicular to the rule.  Since you can pin one end with the point of an awl, these rules make excellent beam compasses too, for marking curves of any radius you need.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Marking Rules\n   \u003c\/b\u003e\n   , graduated in 16ths and 32nds, are flexible enough to snake under a clamp or conform easily to a curved surface.  For metric or decimal inch users, there's a 10\" Marking Rule using those scales.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    T-Rules\n   \u003c\/b\u003e\n   , in 6\", 12\" and 18\" lengths with 1\/16\" and 1\/32\" grads and 1\/64\" marking holes, are 3\" wide satin-finished stainless steel rules mounted on a track which serves as a precise end register.  The rule can be used as a very convenient hook rule, as a T-square, as a precision scribe for marking lines parallel to an edge, or as a gauge for setting routers or saws using the vertical graduations along the free end.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Bend Rules\n   \u003c\/b\u003e\n   , in 6\", 12\" and 18\" lengths, have a 90° bend along their length so they'll fit along the square edge or end of a workpiece.  The bend also makes these rules free-standing on flat surfaces.  Slots in 1\/16\" increments across the corner as well as 1\/32\" holes at the edges let you mark your work for cross-cutting or joinery.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 12\"\n   \u003cb\u003e\n    Centering Rule\n   \u003c\/b\u003e\n   measures left and right equally from zero, making it easy to find the center of a workpiece or to position one piece centered on another.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Incra Rules are sold separately or in sets (T, Marking \u0026amp; Bend Rules) in 6\", 12\" and 18\" lengths.  Sets include a free .5mm mechanical pencil.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Incra Tools","offers":[{"title":"6\"","offer_id":50821488869658,"sku":"485370","price":10.25,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":50821488902426,"sku":"485373","price":20.5,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":50821488935194,"sku":"485382","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/485373d.jpg?v=1768340006"},{"product_id":"incra10metricdecimalrule","title":"Incra 10\" Metric\/Decimal Rule","description":"\u003cp\u003e\u003cstrong\u003e Incra 10\" Metric\/Decimal Rule \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncra's unique rules are equipped with a series of narrow slots and tiny holes that locate your .5mm mechanical pencil lead or the point of your scratch awl at exactly the measurement you choose. Your awl point can't skate around, and your pencil line will be straight and perpendicular to the rule. Since you can pin one end with the point of an awl, these rules make excellent beam compasses too, for marking curves of any radius you need.\u003c\/p\u003e\n","brand":"Incra Tools","offers":[{"title":"Default Title","offer_id":50821489000730,"sku":"485380","price":22.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/485380.jpg?v=1751675301"},{"product_id":"incra-t-rule","title":"Incra T-Rule","description":"\u003cbody\u003e\n \n   \u003cp\u003e\n   Incra's unique rules are equipped with a series of narrow slots and tiny holes that locate your .5mm mechanical pencil lead or the point of your scratch awl at exactly the measurement you choose.  Your awl point can't skate around, and your pencil line will be straight and perpendicular to the rule.  Since you can pin one end with the point of an awl, these rules make excellent beam compasses too, for marking curves of any radius you need.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    T-Rules\n   \u003c\/b\u003e\n   , in 6\", 12\" and 18\" lengths with 1\/16\" and 1\/32\" grads and 1\/64\" marking holes, are 3\" wide satin-finished stainless steel rules mounted on a track which serves as a precise end register.  The rule can be used as a very convenient hook rule, as a T-square, as a precision scribe for marking lines parallel to an edge, or as a gauge for setting routers or saws using the vertical graduations along the free end.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Incra Tools","offers":[{"title":"6\"","offer_id":50821489066266,"sku":"485372","price":27.75,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":50821489099034,"sku":"485375","price":39.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":50821489131802,"sku":"485376","price":50.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/485372cd.jpg?v=1768340012"},{"product_id":"incraruleset","title":"Incra Rule Set","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Incra Rule Sets\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Incra's unique rules are equipped with a series of narrow slots and tiny holes that locate your .5mm mechanical pencil lead or the point of your scratch awl at exactly the measurement you choose.  Your awl point can't skate around, and your pencil line will be straight and perpendicular to the rule.  Since you can pin one end with the point of an awl, these rules make excellent beam compasses too, for marking curves of any radius you need.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Incra Rules are sold here in sets of T, Marking \u0026amp; Bend Rules available in 6\", 12\" and 18\" lengths.  Sets include a free .5mm mechanical pencil.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    T-Rules\n   \u003c\/b\u003e\n   , in 6\", 12\" and 18\" lengths with 1\/16\" and 1\/32\" grads and 1\/64\" marking holes, are 3\" wide satin-finished stainless steel rules mounted on a track which serves as a precise end register.  The rule can be used as a very convenient hook rule, as a T-square, as a precision scribe for marking lines parallel to an edge, or as a gauge for setting routers or saws using the vertical graduations along the free end.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Marking Rules\n   \u003c\/b\u003e\n   , graduated in 16ths and 32nds, are flexible enough to snake under a clamp or conform easily to a curved surface.  For metric or decimal inch users, there's a 10\" Marking Rule using those scales.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Bend Rules\n   \u003c\/b\u003e\n   , in 6\", 12\" and 18\" lengths, have a 90° bend along their length so they'll fit along the square edge or end of a workpiece.  The bend also makes these rules free-standing on flat surfaces.  Slots in 1\/16\" increments across the corner as well as 1\/32\" holes at the edges let you mark your work for cross-cutting or joinery.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Incra Tools","offers":[{"title":"6\"","offer_id":50821489197338,"sku":"485377","price":57.0,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":50821489230106,"sku":"485378","price":83.5,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":50821489262874,"sku":"485379","price":119.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/485377d.jpg?v=1768340015"},{"product_id":"incrarulesprotractor","title":"Incra Rules Protractor","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Incra Rules Protractor\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This protractor makes accurate angle measurement and layout as easy as drawing a straight line.  Micro-fine marking holes in 1\/2° increments precisely locate the tip of a .5mm pencil lead or a marking awl.  It works flat, or with its T-bar registered against the edge of a piece of stock.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Incra Tools","offers":[{"title":"Default Title","offer_id":50821489328410,"sku":"485384","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/485384d.jpg?v=1768340015"},{"product_id":"rosewoodbevel7-12","title":"Crown Bevel - 7-1\/2 inch","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   Essential for marking out dovetails and duplicating angles, sliding bevels lock and hold angles between 0° \u0026amp; 180°. Wooden stock with brass end caps.  7-1\/2 inch steel-blade bevel locks with wingnut.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Crown Hand Tools","offers":[{"title":"Default Title","offer_id":50821489393946,"sku":"431165","price":36.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/431165d.jpg?v=1768340016"},{"product_id":"rosewoodbevelwithlever","title":"Crown Bevel with Lever - 9 inch","description":"\u003cbody\u003e\n\n  \u003cp\u003e\n   Essential for marking out dovetails and duplicating angles, sliding bevels lock and hold angles between 0° \u0026amp; 180°.\n This Crown bevel has a walnut stock with brass end caps and a recessed locking lever. The bevels have hardened, tempered, and blued\n steel blades.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Crown Hand Tools","offers":[{"title":"Default Title","offer_id":50821489459482,"sku":"461118","price":43.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461119.jpg?v=1751675314"},{"product_id":"crowncuttinggauge","title":"Crown Beech Cutting Gauge","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Crown Beech Cutting Gauge\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Crown Cutting Gauge for incising clean lines across the grain, as when laying out dovetails and other joints. The cutting gauge actually cuts the visible shoulder\n of the joint before the saw is used for stock removal. 8\" long.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Crown Hand Tools","offers":[{"title":"Default Title","offer_id":50821489525018,"sku":"461113","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461113d.jpg?v=1768340017"},{"product_id":"crownmarkingandmortisegauge","title":"Crown Marking \u0026 Mortise Gauge","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Crown Marking \u0026amp; Mortise Gauge\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Crown's fine marking \u0026amp; mortise combination gauge features two spurs on one side, one fixed and one adjustable with brass pull slide for laying out mortises. Single spur on the other side is for regular marking.\n Knurled brass knob locks headstock in place. 7-1\/2\" long.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Crown Hand Tools","offers":[{"title":"Default Title","offer_id":50821489590554,"sku":"461114","price":64.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461114d.jpg?v=1768340018"},{"product_id":"crowndeluxemarkingandmortisegauge","title":"Crown Deluxe Marking \u0026 Mortise Gauge","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Crown Deluxe Marking \u0026amp; Mortise Gauge\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Crown's deluxe model is similar to the standard\n   \u003ca data-prev-url=\"\/crownmarkingandmortisegauge.aspx\" href=\"\/products\/crownmarkingandmortisegauge\"\u003e\n    Marking \u0026amp; Mortise Gauge\n   \u003c\/a\u003e\n   except it features a thumbscrew-operated\n slide enabling precise setting of mortise width. It has two pins on one side for marking mortises and a single pin on the other side for standard marking. 7-1\/2\" long.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Crown Hand Tools","offers":[{"title":"Default Title","offer_id":50821489656090,"sku":"461116","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461116.jpg?v=1751675321"},{"product_id":"crownmarkinggauge","title":"Crown Beech Marking Gauge","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Crown Beech Marking Gauge\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This is Crown's simple beechwood construction marking gauge with plastic thumbscrew and hardened steel spur; for marking lines along the grain of the wood.  8\" long.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Crown Hand Tools","offers":[{"title":"Default Title","offer_id":50821489721626,"sku":"461111","price":19.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461111d.jpg?v=1768340019"},{"product_id":"steelengineerssquare2","title":"Steel Engineer's Square - 2 inch","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Steel Engineer's Square - 2 inch\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   A 2 inch square can nestle in your shop apron to be ready in a moment's notice.  This square is durable with reliable accuracy inside \u0026amp; out. Perfect for joinery on any scale, and for accurate calibration of machines \u0026amp; jigs.  Comes with a protective case.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"iGaging","offers":[{"title":"Default Title","offer_id":50821489787162,"sku":"169311","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/169311d.jpg?v=1768340019"},{"product_id":"steelengineerssquare4","title":"Steel Engineer's Square - 4 inch","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Steel Engineer's Square - 4 inch\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This classic layout and setup square combines great durability with reliable accuracy inside \u0026amp; out. It provides the precision essential for joinery on any scale, and for accurate calibration of machines \u0026amp; jigs. Includes a protective case.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"iGaging","offers":[{"title":"Default Title","offer_id":50821489852698,"sku":"169312","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/169312d.jpg?v=1768340020"},{"product_id":"steelengineerssquare6","title":"Steel Engineer's Square - 6 inch","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Steel Engineer's Square - 6 inch\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The 6 inch sized engineer square is our most popular size providing the needed precision for accurate layout work and for precise calibration of machines and jigs. Comes packed in a protective case.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"iGaging","offers":[{"title":"Default Title","offer_id":50821489951002,"sku":"169313","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/169313d.jpg?v=1768340021"},{"product_id":"rosewoodtrysquare6","title":"Crown Try Square - 6 inch","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Crown Try Square - 6 inch\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Steel rivets attach the blade to the walnut handle of this traditional try square.  A brass strip lines the inside surface of the handle.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Crown Hand Tools","offers":[{"title":"Default Title","offer_id":50821490016538,"sku":"461106","price":33.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461106d.jpg?v=1768340023"},{"product_id":"rosewoodtrysquare9","title":"Crown Try Square - 9 inch","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   Steel rivets attach the blade to the walnut handle of this traditional try square. A brass strip lines the inside surface of the handle.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Crown Hand Tools","offers":[{"title":"Default Title","offer_id":50821490082074,"sku":"461107","price":38.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461107d.jpg?v=1768340023"},{"product_id":"shinwaslidingbevel10","title":"Shinwa Sliding Bevel - 10 inch","description":"\u003cp\u003eThis premium Japanese aluminum bevel's locking screw is in the end of the handle, so you can lay the bevel flat on either side. The heavy blade's generous length makes it very convenient for laying out complementary angles.\u003c\/p\u003e","brand":"Shinwa Measuring Tools","offers":[{"title":"Default Title","offer_id":50821490147610,"sku":"461202","price":31.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/461202d.jpg?v=1768340024"},{"product_id":"scratchawl","title":"Crown Scratch Awl","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Crown Scratch Awl\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Attractive beech wood handled tool with 5\" tapered slim blade is very\n useful during layout work in joint-making. Also useful for starting holes for small screws or brads.\n  \u003c\/p\u003e\n  \u003c!--change to new picture and copy with dark handle when light handled-version is sold out. New pictures prepped and uploaded. See advanced notes.--\u003e\n \n\u003c\/body\u003e","brand":"Crown Hand Tools","offers":[{"title":"Light Beech Handle","offer_id":50821490213146,"sku":"462102","price":26.5,"currency_code":"USD","in_stock":false},{"title":"Stained Beech Handle","offer_id":50821490245914,"sku":"462101","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/462101d_42a415ba-ac38-488d-a20f-b8fb77518700.jpg?v=1768340026"},{"product_id":"woodworkers6dialcaliper","title":"Woodworker's 6 inch Dial Caliper","description":"\u003cbody\u003e\n  \n  \u003cp\u003e\n   This fine machinist-quality 6 inch dial caliper may well become your personal \"ultimate measuring tool\". We call it a woodworker's caliper because it is calibrated in 64ths of an inch, with major divisions marked in the terms you're most familiar with: 1\/16\", 1\/8\", 3\/16\", 1\/4\" and so on around the dial. The face is large (1-3\/8\" dia.) and exceptionally easy to read; dimensions as small as 1\/128\" are visible at a glance. The inner scale reads in hundredths of an inch, which is useful for machine work.  Stainless steel.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"iGaging","offers":[{"title":"Default Title","offer_id":50821490311450,"sku":"465008","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/465008-01d.jpg?v=1768340027"},{"product_id":"kunztrammelpoints","title":"Kunz Trammel Points","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cstrong\u003e\n    Kunz Trammel Points\n   \u003c\/strong\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   These simple trammels clamp on a wooden beam up to 1-5\/16\" thick.  Points are 1-3\/8\" long.  A pencil can be used in place of a point.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"Kunz","offers":[{"title":"Default Title","offer_id":50821490376986,"sku":"463901","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/463901d.jpg?v=1768340028"},{"product_id":"dovetailmarkers","title":"Veritas Dovetail Markers","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Veritas Dovetail Markers\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   This handy pair of dovetail markers provides 1:6 ratio for softwood and 1:8 ratio for hardwood. Anodized to avoid marring\n the workpiece. The slope is engraved on the face of the tool.\n  \u003c\/p\u003e\n  \u003c!--\n\nReplace with 177129 when sold out\n\n2\" x 2\" markers with riding ledges on both sides\nMade from anodized aluminum and marked to indicate slope and to avoid error\nDesigned so entire ledge is riding on reference face, even when marking edge dovetails\nAvailable as set in traditional ratios of 1:6 for softwood and 1:8 for hardwood\n\n05N10.11 \tVeritas® Dovetail Markers\n\n--\u003e\n \n\u003c\/body\u003e","brand":"Veritas Tools","offers":[{"title":"Default Title","offer_id":50821490508058,"sku":"177129","price":17.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/177129.jpg?v=1751675352"},{"product_id":"centerfinder","title":"Center Finder","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Center Finder\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Quickly and positively determines the center point of round or octagonal stock up to 8\" in diameter.  Also centers square stock up to 8\" on a side and hexagonal stock up to 5-3\/4\" diameter.  Body is transparent acrylic plastic.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"HHI","offers":[{"title":"Default Title","offer_id":50821490573594,"sku":"467201","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/067201.jpg?v=1751675355"},{"product_id":"steelprotractor","title":"General Tools Steel Protractor","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    General Tools Steel Protractor\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Stainless steel protractor features a lockable pivoting  arm (6\" exposed length) and an etched head with right- and left-reading 180° scales.  Locknut is spring loaded for smooth control when setting.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"General Tools","offers":[{"title":"Square Head","offer_id":50821490639130,"sku":"123024","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Round Head","offer_id":50821490671898,"sku":"463011","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/steel-protractor.jpg?v=1751675359"},{"product_id":"compoundprotractor6","title":"Compound Protractor - 6\"","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Compound Protractor - 6\"\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   These protractors are the most versatile you've ever seen.  They measure angles from 10 to 170 degrees, inside or out, with clearly legible scales and a locking pivot knob for precise marking \u0026amp; scribing. The small unit, in high visibility yellow plastic, has a short 3 - 1\/2\" long arm for use in tight quarters.\n  \u003c\/p\u003e\n \n\u003c\/body\u003e","brand":"General Tools","offers":[{"title":"Default Title","offer_id":50821490737434,"sku":"463025","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/463025d.jpg?v=1768340032"},{"product_id":"leighd4r24dovetailjig","title":"Leigh D4R Pro 24 inch Dovetail Jig","description":"\u003cp\u003eLeigh dovetail jigs set a standard that no other jig can match. The adjustable guide fingers on the D4R Dovetail Jig offer variable spacing of both pins \u0026amp; tails, as close as 1\" apart on center on stock up to 24\" wide. With a Leigh Jig, you design a piece of furniture and then fit the jig to the design, rather than being constrained to the limited number of stock widths that suit conventional fixed templates. The actual cutting of perfect dovetails quickly becomes routine, freeing you to focus on designing creative, aesthetically appealing layouts.\u003c\/p\u003e\n\u003ch5\u003eThrough Dovetails\u003c\/h5\u003e\n\u003cp\u003eIn through dovetail mode, D4R jigs are designed to cut dovetails at 8° (about a 1:7 pitch), creating a sleek, custom look which is especially attractive in thick stock. Another advantage of Leigh's slim angle is unusually great depth of cut, allowing delicate dovetailing in stock far thicker than ordinary bits can handle. A 13\/16\", 8° dovetail bit, for instance, can cut through dovetails in stock up to 1-1\/4\" thick. Hand-cut dovetails would look very much like Leigh production - if you cut them perfectly every time. Operation is surprisingly simple.\u003c\/p\u003e\n\u003cp\u003eOnce you've settled on a joint design, set up pairs of guide fingers accordingly and lock them in place. If you're working in 3\/4\" stock, here's how: Mount the e7 template guide in your router base, install the standard 1\/2\" dovetail bit and set its depth of cut to match the thickness of your pin stock. Mill out as many tail pieces as needed. Next, switch to a 5\/16\" straight bit with the same e7 template guide, and set depth to match the tail piece thickness. Flip the finger assembly over to \"TD Pins\" mode and make a test cut to check the fit with a tail piece. Moving the assembly forward on the jig lets the wedge-shaped pairs of fingers to cover more wood, leaving thicker pins for a tighter fit; moving the assembly backward leaves thinner pins and eases the fit. After a couple of test runs, you're ready to crank out all the pin pieces, with identical perfect fit in every one. Includes 3 bits: 1\/2\", 8° dovetail, 1\/2\", 14° dovetail \u0026amp; 5\/16\" straight bit.\u003c\/p\u003e\n\u003ch5\u003eHalf-Blind Dovetails\u003c\/h5\u003e\n\u003cp\u003eFor half-blind dovetails, a dovetail bit cuts both halves of the joint, with tail pieces (drawer sides) standing vertically just like through dovetail mode, but with pin pieces (drawer fronts) clamped horizontally. Producing a good fit is a simple matter of raising or lowering the bit. To get started, set your depth as suggested in the manual, make a test cut and adjust as needed until the fit is as close to perfect as you please. \u003cbr\u003eIt's worth noting that the 1\/2\" 8° bit supplied with the jig has to cut quite deeply to make a good half-blind fit, so its minimum pin piece (drawer front) thickness is 7\/8\". For half-blind dovetailing in 3\/4\" stock, you'll need to use the 1\/2\", 14° bit listed separately (Item #105317).\u003c\/p\u003e\n\u003ch5\u003eHybrids \u0026amp; Slides\u003c\/h5\u003e\n\u003cp\u003eThe Leigh D4R can do half the work for you in hybrid hand\/machine joints. When your design calls for extremely narrow pins for genuine hand-cut impact, you'll have to cut the tails by hand, since no dovetail bit can taper to much less than a 1\/4\" minimum width. But pins that taper to almost nothing can be cut on the jig just as easily as any others, automating half the work and providing sharp, clean patterns from which to lay out the matching tails.\u003c\/p\u003e\n\u003cp\u003eThe D4R jig does a fine job on through or stopped sliding dovetails, providing convenient holding mechanisms for both horizontal and vertical stock control, and a precisely adjustable router guide system as well. Both depth and thickness of the tail piece are entirely up to you, so you can make the joint as strong as possible in any stock thickness.\u003c\/p\u003e\n\u003cp\u003eLeigh's manual successfully conveys not only the operational details but also the essential simplicity of the jig, so you always know not only what to do but why you're doing it.\u003c\/p\u003e\n\u003ch5\u003eSingle Pass Half-Blind Dovetails\u003c\/h5\u003e\n\u003cp\u003eSingle pass dovetail routing requires precise finger spacing and tail board offset. The horizontal travel of the router must also be limited for accurate tail socket depth. Two design features from Leigh Super Dovetail Jigs make this joint possible:\u003c\/p\u003e\n\u003cul style=\"margin-top: -2px;\"\u003e\n\u003cli\u003ea dual function plastic spacer to space the fingers on the finger bar and position the tail board with the correct offset\u003c\/li\u003e\n\u003cli\u003ea \"stop rod\" inserted in the tail end of fingers to limit router travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eFinger\/Box Joints\u003c\/h5\u003e\n\u003cp\u003eBox joint routing has similar requirements: correct finger spacing and tail (socket) board offset. A similar dual function spacer is used for routing 3\/8\" and 3\/4\" box joints on the standard dovetail fingers. Box joint fit can be problematic but the patented Leigh eBush template guidebush makes precise fit adjustments easy and fast. The box joint spacer, single pass dovetail spacer, nylon stop rod and e7 guidebush are included with all D4R Pro jigs.\u003c\/p\u003e\n\u003ch5\u003eStandard Equipment:\u003c\/h5\u003e\n\u003cul style=\"margin-top: -2px;\"\u003e\n\u003cli\u003e1\/2\", 8° dovetail bit (Leigh # 80-8)\u003c\/li\u003e\n\u003cli\u003e1\/2\", 14° dovetail bit (Leigh # 120-8)\u003c\/li\u003e\n\u003cli\u003e5\/16\" straight bit (Leigh # 140-8)\u003c\/li\u003e\n\u003cli\u003e1\/2\" to 8mm collet reducer (Leigh # 172-8)\u003c\/li\u003e\n\u003cli\u003ee7 template guide\u003c\/li\u003e\n\u003cli\u003eCam-action speed clamps\u003c\/li\u003e\n\u003cli\u003eSliding dovetail fence\u003c\/li\u003e\n\u003cli\u003eSquare drive screwdriver\u003c\/li\u003e\n\u003cli\u003e5\/64\" hex key\u003c\/li\u003e\n\u003cli\u003eFully illustrated user guide\u003c\/li\u003e\n\u003cli\u003eHalf-blind bridge piece material\u003c\/li\u003e\n\u003cli\u003eLeigh Wrench\u003c\/li\u003e\n\u003cli\u003eSingle pass spacer\u003c\/li\u003e\n\u003cli\u003eBox joint spacere\u003c\/li\u003e\n\u003cli\u003eNylon Stop Rod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eJig Versions and Packages\u003c\/h5\u003e\n\u003cp\u003eThe Leigh D4R Pro is available in both inch and metric versions. Both versions use the same template guides and routers bits and come with the same standard equipment. The only difference is that the Metric jig has guide scales graduated in millimieters.\u003c\/p\u003e\n\u003cp\u003eThe D4R jig can be purchased by itself or packaged with accessories at a savings. You can add the Vacuum \u0026amp; Router Support(VRS) or the \u003cb\u003e Accessory Kit, which includes the VRS and Highland's 13-piece bit set. \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca name=\"moreinfo\"\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch6 class=\"addinfo\" style=\"background: #E0D7C6;\"\u003eAdditional Information\u003c\/h6\u003e \n\u003cp\u003e\u003ca data-prev-url=\"\\library\\leigh_gb_and_adaptor_chart.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/\\library\\leigh_gb_and_adaptor_chart.pdf\"\u003e Click here for the Leigh Template Guide System Selection Chart \u003c\/a\u003e\u003c\/p\u003e","brand":"Leigh Jigs","offers":[{"title":"Inch Dovetail Jig Only","offer_id":50821492506906,"sku":"105304","price":769.0,"currency_code":"USD","in_stock":true},{"title":"Inch Dovetail Jig with VRS","offer_id":50821492539674,"sku":"105714","price":879.0,"currency_code":"USD","in_stock":true},{"title":"Inch Dovetail Jig with Accessory Kit","offer_id":50821492572442,"sku":"105715","price":989.0,"currency_code":"USD","in_stock":true},{"title":"Metric Dovetail Jig Only","offer_id":50821492605210,"sku":"105411","price":769.0,"currency_code":"USD","in_stock":true},{"title":"Metric Dovetail Jig with VRS","offer_id":50821492637978,"sku":"105866","price":879.0,"currency_code":"USD","in_stock":true},{"title":"Metric Dovetail Jig with Accessory Kit","offer_id":50821492670746,"sku":"105867","price":989.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/leigh-d4r-pro-1d_13311976-ed53-4dc6-aa60-56cdc67099ca.jpg?v=1768340061"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/collections\/Chairmakerdrawing.jpg?v=1774109806","url":"https:\/\/www.highlandwoodworking.com\/collections\/workshop.oembed?page=68","provider":"Highland Woodworking","version":"1.0","type":"link"}