Festool Circular Saw Blades

Festool offers a variety of saw blades for their miter & track saws. Each saw blade is designed for optimum performance with a particular saw and material. The quality and ease of cut is determined by several factors - saw type, blade speed, material, tooth pattern and number of teeth. Festool blades are made in Germany.

Tooth Shapes

Alternate Top Bevel (ATB) Most wood cutting blades are ATB. Every other tooth on the blade is beveled to the left or right. The sharp top edge slices cleanly into the material - reducing tearout.

Alternate Top Bevel with Raker ATB with raker adds a chipper tooth in between the alternate bevelled teeth to clear the wood chips.

Triple Chip Triple chip blades are used for cutting hard, difficult materials. They have two types of teeth that alternate: a trapezoidal tooth which is beveled on each side and a flat tooth.

Flat Tooth with Chamfer (F-FA) F-FA blades are used for cutting hard, difficult materials. They have flat teeth with variable chamfers for consistent quality and a long service life.

Flat Top Flat top blades are used for cutting uniform materials that don't require the slicing cut of an ATB.

Material & Speed

All Festool saws have variable speed so you can match the blade speed to the material and cut. Festool blades are color-coded for the recommended material.

Blade Sizes

We stock Festool circular saw blades in four diameters.

• 160mm Diameter(~6-1/4") - to fit TS 55 EQ, TS 55 REQ, TS 55 FEQ, TSC 55, TSC 55 K, HKC 55 & HK 55 saws. (160mm blades are available in 2.2mm kerf and 1.8mm kerf. See notes below.)
• 2.2mm kerf 160mm blades fit TS 55 EQ, TS 55 REQ & TSC 55 Saws. They cannot be used on saws designed for 1.8mm kerf blades.
• 1.8mm kerf 160mm blades fit TSC 55 K, TS 55 FEQ, HKC 55 & HK 55 saws. They cannot be used on saws designed for 2.2mm blades.
• 168mm Diameter(~6-5/8") - to fit CSC SYS 50, TS 60 KEB & TSV 60 KEB Saws.
• 210mm Diameter(~8-1/4") - to fit TS 75 EQ Track Saws.
• 216mm Diameter(~8-1/2") - to fit KSC 60 Kapex Miter Saws
• 260mm Diameter(~10-1/4") - to fit KS 120 Kapex Miter Saws
• 190mm Diameter(~7-1/4") - to fit AT 65 Track Saws (This is an older model.)

PLEASE NOTE!
When selecting a 160mm blade, please pay close attention
to the model number & and kerf required for your saw.
1.8mm kerf blades WILL NOT work on saws designed for 2.2mm kerf blades.
2.2mm kerf blades should not be used on saws designed for 1.8mm kerf blades.

For more information, move your cursor over the text in the Type column.
For a larger picture, move your cursor over the image in the Type column.

Size		Type	Kerf	Hook Angle	Bevel Angle	Tooth Type	Teeth	Festool #	Price
160mm 2.2mm Kerf - TS 55 EQ, TS 55 REQ & TSC 55 REB	Wood & Soft Plastic	Fine-toothFine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped ATB(Alternate Top Bevel) blade.	2.2mm	5°	15°	ATB	48	495377 TSC 55 REB & TS 55 REQ Std equipment
		UniversalUniversal Saw Blade - Clean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped ATB(Alternate Top Bevel) blade.	2.2mm	15°	16°	ATB	28	496304
		Panther RipRip Blade - Carbide-tipped ATB(Alternate Top Bevel) blade.	2.2mm	20°	15°	ATB	12	496305
	Special	Cement- & gypsum- bonded materialsCement- & gypsum-bonded materials - Designed for cutting cement-based boards and siding (like Hardieplank®. Diamond-tipped FTG(Flat-top Grind) blade.	2.2mm	-5°	n/a	FTG	4	202958
	Plastic	Solid Surface & LaminateSolid Surface & Laminate - Saw Blade Long-lasting, high-cut quality blade, ideal for laminate flooring and solid surface countertop materials. Carbide-tipped TC(Triple Chip) blade.	2.2mm	4°	15°	TC	48	496309
6¼" - 160mm 1.8mm - HK 55, TS 55 FEQ & TSC 55 K Saws	Wood & Soft Plastic	Fine-toothFine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped ATB(Alternate Top Bevel) blade.	1.8mm	10°	15°	ATB w/ raker	42	205561 TSC 55 K & TS 55 FEQ Std equipment
		UniversalUniversal Saw Blade - Clean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped ATB(Alternate Top Bevel) blade.	1.8mm	15°	10°	ATB	28	205560
		StandardStandard Saw Blade - Coarse-cutting rip blade for use with building panels, wood and soft plastics. Carbide-tipped ATB(Alternate Top Bevel) blade.	1.8mm	25°	15°	ATB	18	500461 HKC 55 EB & HK 55 EQ Std equipment
		Panther RipRip Blade - Carbide-tipped ATB(Alternate Top Bevel) blade.	1.8mm	20°	15°	ATB	12	205559
	Special	Cement- & gypsum- bonded materialsCement- & gypsum-bonded materials - Designed for cutting cement-based boards and siding (like Hardieplank®. Diamond-tipped FTG(Flat-top Grind) blade.	1.8mm	-n/a	n/a	FTG	4	205564 NOT FOR USE ON HK 55 saws!
	Plastic	Solid Surface & LaminateSolid Surface & Laminate - Saw Blade Long-lasting, high-cut quality blade, ideal for laminate flooring and solid surface countertop materials. Carbide-tipped TC(Triple Chip) blade.	1.8mm	-5°	20°	TC	52	205562
		Aluminum & PlasticsAluminum & Plastics - Saw Blade For aluminium panels and profiles, perspex, hard and fibre-reinforced plastics, non-ferrous metals, aluminium composite panels Carbide-tipped blade.	1.8mm	-5°	20°	TC	52	205563
6⅝" - 168mm 1.8mm Kerf - CSC SYS 50, TS 60 KEB & TSV 60 KEB	Wood & Soft Plastic	Fine-toothFine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped ATB(Alternate Top Bevel) blade.	1.8mm	10°	15°	ATB	42	205772 TS 60 KEB & TSV 60 KEB Std equipment
		UniversalUniversal Saw Blade - Clean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped ATB(Alternate Top Bevel) blade.	1.8mm	15°	10°	ATB	28	205771
		Panther RipRip Blade - Carbide-tipped ATB(Alternate Top Bevel) blade.	1.8mm	20°	15°	FT	16	205770
	Special	Cement- & gypsum- bonded materialsCement- & gypsum-bonded materials - Designed for cutting cement-based boards and siding (like Hardieplank®. Diamond-tipped FTG(Flat-top Grind) blade.	1.8mm	12°	n/a	FTG	4	205775
	Plastic	Solid Surface & LaminateSolid Surface & Laminate - Saw Blade Long-lasting, high-cut quality blade, ideal for laminate flooring and solid surface countertop materials. Carbide-tipped TC(Triple Chip) blade.	1.8mm	-5°	20°	TC	52	205773
		Aluminum & PlasticsAluminum & Plastics - Saw Blade For aluminium panels and profiles, perspex, hard and fibre-reinforced plastics, non-ferrous metals, aluminium composite panels Carbide-tipped blade.	1.8mm	-5°	20°	F/FA	52	205774
8¼" - 210mm - Fits TS 75 EQ	Wood & Soft Plastic	Fine-toothFine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped ATB(Alternate Top Bevel) blade.	2.4mm	15°	15°	ATB	52	495381
		UniversalUniversal Saw Blade - Clean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped ATB(Alternate Top Bevel) blade.	2.4mm	15°	15°	ATB	36	495380 TS 75 EQ Std equipment
		StandardStandard Saw Blade - Coarse-cutting rip blade for use with building panels, wood and soft plastics. Carbide-tipped ATB(Alternate Top Bevel) blade.	2.6mm	20°	15°	ATB	18	495379
		PantherPanther Saw Blade - Fast-cutting rip blade with aggressive hook angle and deep gullets. Carbide-tipped ATB(Alternate Top Bevel) blade.	2.6mm	28°	15°	ATB	16	495378
	Plastic	Solid Surface & LaminateSolid Surface & Laminate - Saw Blade Long-lasting, high-cut quality blade, ideal for laminate flooring and solid surface countertop materials. Carbide-tipped TC(Triple Chip) blade.	2.4mm	4°	15°	TC	60	495382
8½" - 216mm - Fits KSC 60 EB Kapex	Wood & Soft Plastic	UniversalUniversal Saw Blade - Clean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped ATB(Alternate Top Bevel) blade.	2.3mm	-5°	15°	ATB	36	576927 KSC 60 Std equipment
		Fine-toothFine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped ATB(Alternate Top Bevel) blade.	2.3mm	-5°	15°	ATB	60	576928
	Plastic	Aluminum & PlasticsAluminum & Plastics - Saw Blade For aluminium panels and profiles, perspex, hard and fibre-reinforced plastics, non-ferrous metals, aluminium composite panels Carbide-tipped blade.	2.3mm	0°	15°	TC	64	576929
		Solid Surface & LaminateSolid Surface & Laminate - Saw Blade Long-lasting, high-cut quality blade, ideal for laminate flooring and solid surface countertop materials. Carbide-tipped TC(Triple Chip) blade.	2.3mm	-5°	15°	MATB	60	576930
10¼" - 260mm - Fits KS 120 EB Kapex	Wood & Soft Plastic	UniversalUniversal Saw Blade - Clean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped ATB(Alternate Top Bevel) blade.	2.5mm	-5°	15°	ATB	60	495388 Kapex KS 120 Std equipment
		Fine-toothFine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped ATB(Alternate Top Bevel) blade.	2.5mm	-5°	-15°	ATB	80	495387
		Universal & Fine-tooth PackageUniversal Saw Blade - Clean-cutting general-purpose blade for wood and soft plastics. Fine rip cut blade for glue-ready joints. Carbide-tipped ATB(Alternate Top Bevel) blade. Fine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped ATB(Alternate Top Bevel) blade.	2.5mm	-5°	15°	ATB	60/80	203150
	Plastic	Solid Surface & LaminateSolid Surface & Laminate - Saw Blade Long-lasting, high-cut quality blade, ideal for laminate flooring and solid surface countertop materials. Carbide-tipped TC(Triple Chip) blade.	2.5mm	-5°	15°	MATB	64	495386
7½" - 190mm Fits AT 65	Wood & Soft Plastic	Fine-toothFine-Tooth Saw Blade - Cross-cut blade for smooth results in sheet goods, melamine, hard and soft woods. Carbide-tipped ATB(Alternate Top Bevel) blade.	2.8mm	8°	15°	ATB	48	486297