Festool KA 65 Conturo Edge Bander

The Festool Conturo Edge Bander can change the way you do edge banding. If you have astationary edge banding machine, the Conturo will complement your process by simplifyingand speeding up edge banding on curved pieces. If you don't have an edge banding machine,the Conturo will handle all of your edging jobs while freeing you from tedious anddifficult iron or heat gun applications.

The Conturo is easy to use and handles almost any edging job you can imagine. Ithandles straight and curved edges – even inside curves down to 2" radius. It appliesedging from 23/32" to 2-9/16" wide. It can apply edging on beveled surfaces. It offerstwo application speeds to ensure efficiency and quality.

Glue System

The Conturo uses hot melt glue that's heated as needed to eliminate potential spillageand waste. The advanced, electronically controlled glue application system dispenses justthe right amount of glue for the job. You can adjust the rate of glue application and thetemperature of the glue at the display interface. The display will also show you how muchmore glue you have so you don't run out in the middle of a piece.

Glue for the Conturo comes in round blocks about the size of a hockey puck. It'savailable in two colors: natural and white. (Black andbrown will become available in summer of 2015.)

Specifications:

• Banding Height 23/32" to 2-9/16" (18-65mm)
• Banding Thickness 1/32" to 1/8" (0.5-3.0mm)
• Inner Radius Minimum of 2" (50mm)
• Weight 17.4 lbs (7.9 kg)

Standard Conturo Includes:

• CONTURO Edge Bander
• Support handle / guide table
• Natural EVA Adhesive - Pack of 4
• Systainer

Conturo SET Includes:

• Everything in the standard Conturo
• Festool KB-KA 65 Edge Trimmng Set