TRY OUR WOODWORKING
SEARCH ENGINE
Workshop Wisdom
CURRENT SPECIALS
FLIP
THROUGH OUR WOODWORKING TOOL CATALOG
FREE
STREAM 68 EPISODES
OF OUR TV SHOW
The Highland Woodworker
|
Festool T18+3 and C18 Lithium Ion Cordless Drills
Festool T18+3 and C18 Lithium Ion Cordless Drills
|
|
Select Product Options Here
Detailed Description
Festool T18+3 and C18 Lithium Ion Cordless Drills
Festool's 18V cordless drills bring a new paradigm to drilling machines, and are far more affordable than they appear at first glance. They offer a
3 year warranty on the entire drill, including the drill itself, the charger, as well as the batteries. That's right, even the batteries will be replaced
within 3 years of purchase if they cease to hold a charge!
Most cordless drills rely on a mechanical clutch. The Festool cordless drill uses an advanced electronic clutch, resulting in better control and far less
wear and tear on the motor and bearings.
Festool 18V cordless drills feature an advanced brushless motor which brings tangible higher efficiency, better reliability and longer service life. You will
drive more screws faster. In addition, the torque is electronically controlled to produce the same torque regardless of which speed setting is used. You can
switch back and forth between drill and drive modes without losing your clutch setting.
The state-of-the-art lithium-ion cells used in Festool's cordless drill batteries are individually selected to exactly match one another, resulting in
a balanced load and absolute optimal charge and discharge cycles. They take a full charge in less than 70 minutes. The intelligent charger is also compatible
with legacy Festool NiCad and NiMH batteries. The drill has a LED that illuminates the target area when you squeeze the drill's trigger.
Chucks
Festool's drills will allow you to drill and drive into areas that standard drills simply can't access. Three removable Fastfix® chucks and the
Centrotec chuck comprise the system. The Keyless Chuck accepts bits up to 1/2" shank diameter. The Centrotec Chuck that lets you instantly snap 1/4" hex
shank bits in & out. It is shorter and less bulky than conventional chucks. Switch to the Right Angle Chuck to work at a right angle to the drill's axis with the ability to rotate
the chuck in 22.5° increments around a full circle. The right angle chuck holds 1/4" hex bits directly, but it also holds either the keyless drill chuck or
the Centrotec chuck.
18v Drill Packages (Note: Basic Packages do NOT include batteries or a charger.)
Basic 18V Drill includes:
- Drill
- FastFix Keyless Chuck - 1/2"
- Centrotec Chuck
- Centrotec Bit Holder
- #2 Phillips bit (T18) or TX24 Torx Bit (C18)
- Belt clip
- Systainer3 SYS3 M 187 Storage Case
- No batteries
- No charger
-
18v Drill Compact Set includes:
Festool 18V Drill Specifications
Model |
C 18 |
T 18+3 |
Motor type |
EC TEC Brushless |
Battery Voltage & Amp-hours |
18v / 4.0Ah |
RPM Low / High |
0-450 / 0-1500 |
Chuck capacity |
1/16" (1.5mm) - 1/2" (13mm) |
Max. drill size - steel |
1/2" (13 mm) |
Max. drill size - wood |
1-9/16" (40mm) |
Torque setting range |
7.0-70.8 in-lbs (0.8-8.0Nm) |
6.0-53.1 in-lbs (0.5-6.0Nm) |
Weight |
3.75 lbs (1.7kg) |
3.85 lbs (1.75kg) |
Due to Festool policy, Highland Woodworking cannot ship Festool products outside the 48 contiguous U.S. states. Any Festool order that we ship requires an shipping address in the contiguous US.
Product Warnings
WARNING FOR RESIDENTS OF CALIFORNIA!
This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please read our Proposition 65 warning.
For more information, see www.P65Warnings.ca.gov.
See Festool's Proposition 65 warning.
|
|