Festool VAC SYS Vacuum Clamping Module

The clamping module is the heart of the Festool Vacuum Clamping system. The base of the clamping module can be secured to a non-porous work surface using the same vacuum that holds your workpiece on top or it can be clamped or screwed down. The vacuum cup on top holds your workpiece. It can rotate through 360° and tilt through 90°. The vacuum cup can be changed easily without tools and without turning off the pump.

(PLEASE NOTE: the pump must be purchased separately when buying the clamping module, unless you purchase it as part of the full system.)

Vacuum Cups

Vacuum cups come in four shapes to suit various workpieces. Each clamping module comes with one vacuum cup. The SE 1 module comes with a 215mm (~8-7/16") round vacuum cup. The SE 2 module comes with a 275mm x 100mm (~10-13/16" x 3-15/16") oblong vacuum cup.

Module Type

The SE 1 Clamping Module is the starter module. It includes the module base with round vacuum cup, foot valve & hoses to connect to the vacuum pump. (NOTE: pump is not included).

The SE 2 Clamping Module is an addition to the SE 1 module so that you can use two vacuum clamps together. It includes the module base with oblong vacuum cup & hoses to connect to the vacuum pump and SE 1 Module.