Festool VAC SYS Vacuum Clamping System

See below for video on the VAC SYS Clamping System.

The Festool VAC SYS Clamping System will change the way you work. Whether you are in the shop or on the jobsite, the VAC SYS provides a strong, stable base for holding workpieces in a variety of shapes and sizes while you sand or machine them. The heavy duty clamping module can mount to any work table or bench with screws, or to any non-porous surface using the built in vacuum system. Festool even offers a purpose-built mount for the MFT3 Multi-Function Table.

With the clamping module in place, you only need to insert the vacuum cup and put your workpiece on top. The vacuum pump provides plenty of clamping power for almost any application. You can easily clamp and release your workpieces using the foot valve - without turning off the pump. Once clamped, you can rotate your workpiece through 360° and tilt it through 90° with ease.

System Options

The VAC SYS Vacuum Clamping System includes everything you need to get started — the pump to power the system, the SE 1 Clamping Module with a Round Vacuum Cup and the foot valve for hands-free control.

The VAC SYS Vacuum Clamping System SET adds a second clamping module (SE 2 with and oblong vacuum cup) to run inline with the SE 1 Clamping Module. With the set, you can hold larger pieces with two modules.

Includes:

• VAC SYS Vacuum Clamping System
• VAC PMP Vacuum Pump
• VAC SYS SE 1 Clamping Module
• Round Vacuum Cup
• Foot Valve
• Vacuum hose to connect the pump, module & foot valve
• Systainer for the VAC SYS SE 1, vacuum cup & foot valve
• VAC SYS Vacuum Clamping System SET
• Everything in the VAC SYS Vacuum Clamping System
• VAC SYS SE 2 Clamping Module
• Oblong Vacuum Cup
• Vacuum hose to connect to the VAC SYS Vacuum Clamping System
• Systainer for the VAC SYS SE 2, vacuum cup & hose

Please Note: The VAC SYS is not designed to operate above 2000m (6,500 ft) of elevation.
Use above this level is prohibited.

Additional Information

Videos