Festool Spiral Up-Cut Router Bits - 8mm shank

Email this page to a friend

Detailed Description

Festool Spiral Up-Cut Router Bits - 8mm shank

Straight cutting spiral bits give very smooth shearing cuts. These bits are up-cutting bits (they pull the chips up out of the cut.)

Please note: These bits all have 8mm shanks.

Cutting Diameter	Cutting Length	Shank	Overall Length	Cutter Material	HW #	Festool #
6mm (~1/4")	21mm (~13/16")	8mm	50mm (~2")	HSS	721510	490944 ♦ (HS Spi S8 D6/21)
6mm (~1/4")	21mm (~13/16")	8mm	50mm (~2")	Carbide	721511	490978 ♦ (HW Spi S8 D6/21)
10mm (~3/8")	30mm (~1-3/16")	8mm	60mm (~2-3/8")	Carbide	721514	490980♦ (HW Spi S8 D10/30)
♦ These bits are used for slot joints FZ 6 and open dovetail joints SZO 14 on the Festool VS 600 Joinery Jig (discontinued).
♦ This bit is used for slot joints FZ 10 and open dovetail joints SZO 20 on the Festool VS 600 Joinery Jig (discontinued).

Due to Festool policy, Highland Woodworking cannot ship Festool products outside the 48 contiguous U.S. states. Any Festool order that we ship requires an shipping address in the contiguous US.

Product Warnings

WARNING FOR RESIDENTS OF CALIFORNIA!

This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Please read our Proposition 65 warning.

For more information, see www.P65Warnings.ca.gov.

See Festool's Proposition 65 warning.

CLOSE X

Festool California Proposition 65 Warning