|
| | |
|
| |
| | |
|
Kreg Zinc Pocket Hole Screws
|
Kreg Zinc Pocket Hole Screws
|
|
Select Product Options Here
| Type: |
|
| Thread: |
|
| Length: |
|
| Pack Quantity: |
|
Detailed Description
Kreg Zinc Pocket Hole Screws
Kreg's zinc screws are the standard choice for pocket hole joints in indoor furniture. They are made from case hardened steel for durablility and strength. The screw tips are sharp and self-tapping so they can drive into wood without a pilot hole.
The underside of the head is flat so it mates perfectly with the base of the pocket hole - unlike drywall screws.
Maxi-Loc & Pan Heads
Screw Types
Kreg's screws come in two head styles: Maxi-Loc and Pan Head. Maxi-Loc screws are Kreg's washer-head design. It gives the broadest bearing area and the surest hold. Pan head screws have a slightly smaller head, without the built-in washer.
They are used for joints in thinner stock and very hard woods.
Coarse thread Kreg screws have deep threads that cut into softwoods and sheet goods for maximum grip. They should be used in basswood, spruce, fir, cedar, pine, MDF, plywood & particle board.
Fine thread Kreg screws are smaller so they can drive into hard woods without splitting, but they have more threads per inch to insure sufficient hold. They should be used in mahogany, cherry, maple, poplar, birch,
ash, oak & hickory.
Kreg offers screws in six lengths from 3/4" to 2-1/2". See the chart below for help selecting the correct length for your application.
Kreg screws have self-tapping tips so they drive easily and without splitting. They use square drive for positive connection and easy driving. These screws use # 2 square drivers.
If you're making furniture for outdoors, check out Kreg's Blue Kote or Stainless Steel screws.
| Screw Type |
Length |
Pack |
Price |
|
For material 1/2" thick
Kreg # SPS-F075
Fine for
Hardwoods
Pan
Head
|
3/4" |
100 |
|
|
| 500 |
|
|
| 1200 |
|
|
For material 5/8" thick
Kreg # SPS-C1
Coarse for
Softwoods
Pan
Head
|
1" |
100 |
|
|
| 250 |
|
|
| 500 |
|
|
| 1200 |
|
|
For material 5/8" thick
Kreg# SML-C1
Coarse for
Softwoods
Maxi-Loc Head
|
1" |
100 |
|
|
| 500 |
|
|
| 1200 |
|
|
For material 5/8" thick
Kreg # SPS-F1
Fine for
Hardwoods
Pan
Head
|
1" |
100 |
|
|
| 500 |
|
|
| 1200 |
|
|
For material 3/4" thick
Kreg # SML-C125
Coarse for
Softwoods
Maxi-Loc Head
|
1-1/4" Most
Popular!
|
100 |
|
|
| 250 |
|
|
| 500 |
|
|
| 1200 |
|
|
For material 3/4" thick
Kreg # SPS-F125
Fine for
Hardwoods
Pan
Head
|
1-1/4" |
100 |
|
|
| 500 |
|
|
| 1200 |
|
|
For material 3/4" thick
Kreg # SML-F125
Fine for
Hardwoods
Maxi-Loc Head
|
1-1/4" |
100 |
|
|
| 250 |
|
|
| 500 |
|
|
| 1200 |
|
|
For material 7/8" - 1-1/8" thick
Kreg# SML-C150
Coarse for
Softwoods
Maxi-Loc Head
|
1-1/2" |
100 |
|
|
| 250 |
|
|
| 500 |
|
|
For material 7/8" to 1-1/8" thick
Kreg # SPS-F150
Fine for
Hardwoods
Pan
Head
|
1-1/2" |
100 |
|
|
| 1200 |
|
|
For material 7/8" to 1-1/8" thick
Kreg # SML-F150
Fine for
Hardwoods
Maxi-Loc Head
|
1-1/2" |
100 |
|
|
| 500 |
|
|
For material 1-1/4" - 1-3/8" thick
Kreg # SML-C2
Coarse for
Softwoods
Maxi-Loc Head
|
2" |
50 |
|
|
| 250 |
|
|
For material 1-1/2" thick
Kreg # SML-C250
Coarse for
Softwoods
Maxi-Loc Head
|
2-1/2" |
50 |
|
|
| 125 |
|
|
| 250 |
|
|
Product Warnings
 WARNING FOR RESIDENTS OF CALIFORNIA!
This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please read our Proposition 65 warning.
For more information, see www.P65Warnings.ca.gov.
|
|
Price: Starting at $28.50
|
|
|
| | |
|
Buy a Gift Certificate
Watch the
Highland Woodworker TV Show
HALF PRICE
CLEARANCE
Select items
at 50% discount
| | |
| Enter name to search for wish list
| |
| | |
|
Information about
Sale Price Comparisons
|
|