Micro Jig GRR-Ripper+ GR-200PRO Push Block

Micro Jig GRR-Ripper+ GR-200PRO Push Block

The GRR-RIPPER PRO is designed to give woodworkers of all skill levels the confidence and control needed to achieve perfect cuts every time. Whether you're making thin rips down to 1/4", handling irregular-shaped stock, or performing intricate cuts on a router table, the GRR-RIPPER PRO offers the precision and safety you need.

Putting your fingers next to a spinning blade or bit is serious business. The Micro Jig GRR-Ripper stock control system is serious about making it safe to do the close work that sometimes has to be done on the tablesaw, router, jointer and bandsaw.

The Micro Jig GRR-Ripper lets you grip, hold and feed both sides of small workpieces, ripping strips as narrow as 1/4 inch (down to 1/8 inch with an optional leg). Grooved non-slip pads on the bottom of the jig's adjustable legs grab & hold your work securely. The legs bear on your material on both sides of the cut, with the body of the jig acting as a tunnel over the blade as protection.

A large push handle keeps your hand well above blade. For ripping strips with little material situated on the outside of the blade, a balance support fence keeps the Micro Jig GRR-Ripper level and steady. For work pieces longer than 16 inches, two Micro Jig GRR-Rippers are recommended.

The Grr-Ripper GR-200PRO now includes the Safe Rip Kit, which makes it easier to line up cuts so that you don't accidentally cut the center leg or the Grr-Ripper.

Micro Jig GRR-Ripper Advanced GR-200 System includes:

• GRR-Ripper+ 3D Pushblock: Fully adjustable for contolling your material
• Adjustable Spacer: To eliminate snipe on your router table and to increase control on wider stock
• Stabilizing Plate: For keeping workpiece parallel to the fence
• SafeRip Kit
• User's manual
• 1/2" and 1/4" Leg: Allows 1/2" and 1/4" rip cuts which are safe, repeatable and accurate