Micro Jig ZeroPlay 360 Sled Kit

Micro Jig ZeroPlay 360 Sled Kit

The Micro Jig ZeroPlay 360 Sled Kit combines the excellent ZEROPLAY Miter Bar with the versatility of the MATCHFIT Dovetail Hardware to provide everything you need to build the most useful sled in your shop.

Most table saw sleds have only one function, and factory miter gauges have a limited range of angles. With Micro Jig ZeroPlay 360 Sled Kit's unique grid layout of dovetail grooves, this sled is fully adjustable to cut any size stock and allows you to set your fence at any angle, locking it in place with the included MATCHFIT Dovetail Hardware. The ZEROPLAY Miter Bar insures that the sled is running parallel to the blade at all times.

This sled is incredibly easy to build. All you need is some plywood, a 1/2" 14-degree dovetail router bit, and about an hour. The package includes easy to follow plans.

Included in the Micro Jig ZeroPlay 360 Sled Kit:

• ZEROPLAY Miter Bar (Single Bar)
• ZEROPLAY Miter Bar Instructions
• MATCHFIT 1-1/2" Dovetail Track Screw Hardware (4x 10-32 1-1/2" Track Screws, 4x 10-32 Wing Knobs)
• Illustrated 360 Sled and Fence Plans

ZEROPLAY Miter Bars will fit ANY standard (3/4" x 3/8") T-Track miter slot that measures between 0.73" and 0.79" wide and at least 5/16" deep.

Important: Not compatible with table saws with 'Tabs' cast into the top of the miter slot or 5/8" miter slots.

Additional Information

Download the free step-by-step Instructions to see just how easy it is to build the most versatile sled in your workshop!

Videos