Oneway Large Easy-Core Coring Base Set

Oneway Large Easy-Core Coring Base Set

14", 16", 18", 20", 22", 24" and 26" EASY-CORE CORING BASE SETS

Base Set includes: steel base plate, knife and finger support posts, and handle. The Base Set size you choose is determined by the swing capacity of your lathe.

Size Selection

The size listed is the minimum swing that the base set will accomodate. If the actual swing of your lathe is smaller, you will need to select the next size down. The post of the knife set will be able to cover the different.

For example, a 23-1/2" swing lathe, will require a 22" base set, not a 24" Base Set. Please measure the swing of your lathe. (Sometimes manufacturers will round up the actul lathe swing.)

Additional Items Required

Important: In addition to the Base Set, the Large Easy-Core Coring System also requires a KNIFE SET and a CLAMP BLOCK which are sold separately.

The Knife Sets determine what size bowl blanks can be cored. There are four knife sets available for a complete system.

The Clamp Block required will vary from lathe to lathe. To determine the size of the Clamp Block needed, measure the distance between the bedways.