{"product_id":"festoolkapexcrownstop","title":"Festool AB-KS Kapex Crown Stop","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   The Festool Crown Stop is a multi-purpose extension and stop used with the\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/festoolkapexslidingcompoundmitersaw10.aspx\" href=\"\/products\/festoolkapexslidingcompoundmitersaw10\"\u003e\n    Kapex Miter Saw\n   \u003c\/a\u003e\n   .\n The main part of the the Crown Stop is a 5-3\/8\" wide by 8-1\/4\" deep table extension that mounts\n to the side of the Kapex saw in seconds (just tighten the knob!) The groove in the table extension can accept\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/festool4-1116guiderailclamppk2.aspx\" href=\"\/products\/festool4-1116guiderailclamppk2\"\u003e\n    Festool FS Clamps\n   \u003c\/a\u003e\n   to\n use as hold downs or the sliding stop(see below).\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The\n   \u003cb\u003e\n    sliding stop\n   \u003c\/b\u003e\n   can be used to hold a workpiece against the fence, but it's primary use is to\nsupport a piece of crown molding leaned against the fence when cutting the miter. (Upside down and backwards, of course.)\n  \u003c\/p\u003e\n  \u003cp\u003e\n   When using the crown stop, you can quickly and accurately position crown molding stock – greatly simplifying\n the setup work for this complicated cut.\n   \u003ca href=\"#moreinfo\"\u003e\n    See the PDF of the directions below\n   \u003c\/a\u003e\n   to get\n a better idea of how this works.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Crown Stop includes one table extension and one sliding stop. It can be used on either side of the Kapex saw. \nIf you need crown stops for both sides of your saw, you need two crown stops.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cspan style=\"font-weight:bold;\"\u003e\n    Please Note:\n   \u003c\/span\u003e\n   The Crown Stop is not compatible with the the\n   \u003ca data-prev-url=\"\/festool-kapex-ug-mobile-miter-station-extensions.aspx\" href=\"\/products\/festool-kapex-ug-mobile-miter-station-extensions\"\u003e\n    Kapex Extensions\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003ca name=\"moreinfo\"\u003e\n  \u003c\/a\u003e\n  \u003ch3 style=\" background:#D6CBB5; padding:2px 4px; font-size:13.33px;\"\u003e\n   Additional Information\n  \u003c\/h3\u003e\n  \u003cp style=\"margin:-4px 0px 0px 0px\"\u003e\n   \u003ca data-prev-url=\"\/library\/manuals\/festool\/festool-crown-stop-instructions.pdf\" href=\"https:\/\/info.highlandwoodworking.com\/library\/manuals\/festool\/festool-crown-stop-instructions.pdf\"\u003e\n    Kapex Crown Stop Instruction Sheet\n   \u003c\/a\u003e\n   (PDF)\n  \u003c\/p\u003e\n  \u003c!--\u003cp\u003eFestool Crown Stops support nested work pieces at any angle when using the Festool Kapex Miter Saw\u003c\/a\u003e.\n Base extensions provide enhanced material support to the left or right, and enable additional clamping\n possibilities when used with Festool FS clamps.\u003c\/p\u003e\n\n\u003cp\u003eCrown Stops allows you to quickly and accurately position crown molding stock, and greatly simplifies the setup work for making\n complicated cuts. (1 base extension and 1 crown stop, 2 each are needed with the FS Clamps).\u003c\/p\u003e\n\nExpanding the versatility of the Kapex sliding compound miter saw, the Crown Stop with Base Extension supports nested workpieces\n at any angle, and provides enhanced material support to the left or right of the saw. Integrated t-slots enable additional\n clamping capability, expanding the use of job-specific jigs when used with Festool FS clamps. Includes 1 base extension and\n 1 crown stop.\n\n    Secures crown molding in the nested postion for safer, more accurate cutting\n    Crown stops slide easily and lock securely with T-nut construction, allowing you to move quickly between setups\n    Integrated T-slots enable additional clamping capability, expanding the use of job-specific jigs when used with\n    Festool FS clamps\n    Base extensions attach quickly via a V groove channel on each side, minimizing set up time\n--\u003e\n \n\u003c\/body\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":50821780963610,"sku":"720241","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/720241_2702a804-d8de-4874-a782-e7443b37ea55.jpg?v=1768341149","url":"https:\/\/www.highlandwoodworking.com\/products\/festoolkapexcrownstop","provider":"Highland Woodworking","version":"1.0","type":"link"}