{"product_id":"festoolroutercenteringmandrel","title":"Festool Router Centering Mandrel","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   The centering mandrel is used to precisely align the router collet with the template guide.  With the template guide\n loosely installed, put the mandrel through the template guide and fix it in the router collet.  Then, raise cone of the\n mandrel until it seats in the template guide. While the cone holds the template guide in place, tighten it.  Remove the\n centering mandrel.  Now your collet and template guide are perfectly aligned.  This centering mandrel is made by Festool,\n but will work in any router that has a 1\/4\" or 8mm collet.  The maximum diameter of the cone(and largest template\n guide that can be centered) is 40mm (1-9\/16\").\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    Please note: this tool is to be used for setup only.  DO NOT operate your router with this tool installed.\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003c!--\nmfg propaganda\n\n\nCentering Mandrel ZD-OF\/D 6,35+8\nFor all Festool routers\nItem number 492187\n\nWorks with 1\/4\" and 8 mm collets.\n    For shank support dia. 1\/4“ (6.35 mm) and 5\/16\" (8 mm) for centering the copying rings\n--\u003e\n \n\u003c\/body\u003e","brand":"Festool","offers":[{"title":"Default Title","offer_id":50821672894746,"sku":"720857","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/720857-01d.jpg?v=1768340906","url":"https:\/\/www.highlandwoodworking.com\/products\/festoolroutercenteringmandrel","provider":"Highland Woodworking","version":"1.0","type":"link"}