{"product_id":"gyokucho-rip-dozuki-saw-372","title":"Gyokucho RazorSaw Rip Dozuki Saw - Model 372","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Gyokucho RazorSaw Rip Dozuki Saw - Model 372\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   Gyokucho's Rip Dozuki Saw is great for all types of joinery. The thin blade has impulse hardened teeth for long life. You'll\n get a very thin kerf and a smooth cut even in very hard woods. The 372 saw has a traditional wooden handle with a cane wrap.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   19 tpi.  Blade thickness is 0.3mm (.012\").   Kerf is .018\".   Blade length is 240mm (9-7\/16\"). \n Overall length is 23-7\/8\".  Blade height (depth of cut) tapers along the length of the blade.  At the heel it measures \n44mm (1-3\/4\") and at the toe it's 57mm (2-1\/4\").  Weighs 8-1\/4 oz.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003cb\u003e\n    This is the saw that David Barron recommends\n   \u003c\/b\u003e\n   for use with his\n   \u003ca data-prev-url=\"\/david-barron-magnetic-dovetail-saw-guide.aspx\" href=\"\/products\/david-barron-magnetic-dovetail-saw-guide\"\u003e\n    Magnetic Dovetail Saw Guides\n   \u003c\/a\u003e\n   and\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/david-barron-magnetic-guide.aspx\" href=\"\/products\/david-barron-magnetic-guide\"\u003e\n    Magnetic Saw Guides\n   \u003c\/a\u003e\n   .\n  \u003c\/p\u003e\n  \u003cp\u003e\n   \u003ci\u003e\n    The Gyokucho Rip Dozuki saw has impulse hardened teeth, which greatly increases the life of their sharp edges, but they cannot be resharpened.\n When the saw eventually dulls, you'll need to\n    \u003ca data-prev-url=\"\/gyokucho-rip-dozuki-saw-372-blade.aspx\" href=\"\/products\/gyokucho-rip-dozuki-saw-372-blade\" style=\"font-style:italic; color#660000;\"\u003e\n     replace the blade\n    \u003c\/a\u003e\n   \u003c\/i\u003e\n   .\n  \u003c\/p\u003e\n  \u003c!--\n  mfg propaganda with bad google translationThin blade series of pronouns Rezaso. The birth of the blade-type saw began from here. 0.3mm ultra-thin blade\n realize a cut that does not require is on the sharp sharpness and . Just a gem, is a product of virtuosity.Rezaso Shirube is a precision machining type.\n Until the general wood and plywood, laminated wood, bamboo is ideal for all finishing. Also width wide type you can cut the material of up to 2 cun angle.\n Vertical minced type is capable of finishing hard natural wood (ebony, rosewood, etc.).Rezaso Shirubeis the ultimate precision machining for the saw. You\n can go mad not finish cut an inch. Since long Sekin is fixed, while feeling the weight of the saw in hand, you beautiful cut with the speedy sharpness is\n obtained when the grind rhythmically. Up to a maximum of 35mm thickness is 0.3mm thickness of the thickness (width wide type is up to 2 cun angle position)\n is possible finishing of the plate of. Also verticalfor type will be able to choose the products that meet the demands can also be used for the finishing\n of hard natural wood (such as ebony, rosewood).http:\/\/www.gyokucho.co.jp\/products\/feature\/Display to compare the fineness of the eye of the saw blade. Our\n in is using a representation of what sheet and are two pitch \u0026 dimension.Pitch (mm)pitchOne blade of the eye of the size, refers to the distance from the\n tip of the Ichiha to the tip of the Tsugiha, as the number is less eye is fine, as the increase, will be rough.Sheet thickness (mm)What th DimensionAs\n basically a thin blade, suitable for crafted work, thick blade is suitable for fixtures. In addition, narrow eyes in the relatively thin blade, has become\n a rough eyes in thick blade.What th DimensionThe number of eyes between a certain distance (1 cun 30.3mm), the craftsman and the like than conventional,\n eyes some to the spacing of the sequence 1 cun of teeth have been using the display method of Sunshaku have teeth (blade) you are viewing the fineness.The\n shock hardening?Using ultra high frequency (27.12MHz), with impact energy only the surface of the saw blade, it is a heat treatment method for obtaining a\n cured layer by heating to the quenching temperature in the 0.003 to 0.005 seconds. Surface hardness, finish in Hv900 ~ 1200. (Hardness comparison:\n dressing file = Hv800 ~ 850)The secret of Yongkang out! There is here! Shock hardeningFirmly only the surface, the center is hardening a flexibleShock\n hardeningHere it is different! Our shock hardening!The Company, in order to finish the blade durable, uses the shock hardening machine that was developed\n in-house. Faithful to protect the \"hardening of once per position blade\", which is the basic of quenching, and one blade one blade surely quenching. In\n order to take advantage of the flexibility of the saw material, it has been subjected to a hardening only the surface.Indelible laser markingAll of the\n products are clearly stated name of product and plate thickness, blade length, blade part number. Products can be confirmed even if you lose your package\n has been used only to check the mark. Using the laser marking by laser irradiation in marking, it is considered so mark does not disappear.Laser marking\nSpecial surface treatmentThe Company adopted the electroless nickel plating.Strong special surface treatment to rustOn the saw blade surface by coating\n processing thin special metal, we observe the saw from rust.Saw blade, or sharpness becomes bad and rust, it can cause breakage eye.It does not have to\n worry about dirty the cutting material by rust.Wood tar has become less likely to adhere. It should be attached wood tar, washed off clean because it\n is washable, easy to care for.Specifications over the coastal areas and, to demonstrate the efficacy at the time of over-the-counter display.--\u003e\n \n\u003c\/body\u003e","brand":"Gyokucho RazorSaw","offers":[{"title":"Default Title","offer_id":50821944836378,"sku":"456468","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/456468-01d.jpg?v=1768342238","url":"https:\/\/www.highlandwoodworking.com\/products\/gyokucho-rip-dozuki-saw-372","provider":"Highland Woodworking","version":"1.0","type":"link"}