{"product_id":"onewayvacuumgaugekit","title":"Oneway Vacuum Gauge Kit","description":"\u003cbody\u003e\n \n  \u003cp\u003e\n   \u003cb\u003e\n    Oneway Vacuum Gauge Kit\n   \u003c\/b\u003e\n  \u003c\/p\u003e\n  \u003cp\u003e\n   When vacuum chucking, it is critical to maintain sufficient vacuum. The\n   \u003cb\u003e\n    Vacuum Gauge Kit\n   \u003c\/b\u003e\n   helps you do that. It fits in your vacuum\n piping between the vacuum pump and the rotary air fitting. It has a bleader valve and a gauge that reads pressure in inches of Mercury and Bar.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   It's best to check the gauge periodically to make sure you have appropriate vacuum. You'll want to keep at least 20 inHg of vacuum\n (~0.65 Bar) to hold most pieces securely. More vacuum will hold better, but don't use too much or you might collapse your bowl.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   The Vacuum Gauge Kit includes everything you need including: a vacuum gauge, mounting bracket, bleeder Valve,\n 5 feet of 3\/8\" reinforced PVC hose, hardware pack and instructions.\n  \u003c\/p\u003e\n  \u003chr\u003e\n  \u003cp\u003e\n   Vacuum chucking is a productive turner's dream of instant, positive, non-marring holding power and instant release of the\n work at the flip of a lever.  If your headstock spindle is through-bored with no cross holes, and is threaded at the outboard end,\n then you're ready to mount a vacuum chuck.\n  \u003c\/p\u003e\n  \u003cp\u003e\n   You'll need six components to complete the system: a Drum Chuck,\n a\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/onewayrotaryairfitting.aspx\" href=\"\/products\/onewayrotaryairfitting\"\u003e\n    Rotary Air Fitting\n   \u003c\/a\u003e\n   ,\n a\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/onewayvacuumgaugekit.aspx\" href=\"\/products\/onewayvacuumgaugekit\"\u003e\n    Vacuum Gauge Kit\n   \u003c\/a\u003e\n   ,\n a\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/onewaygastvacuumpump.aspx\" href=\"https:\/\/info.highlandwoodworking.com\/onewaygastvacuumpump.aspx\"\u003e\n    Vacuum Pump\n   \u003c\/a\u003e\n   ,\n and\n   \u003ca data-prev-url=\"http:\/\/www.highlandwoodworking.com\/onewaymountingadapterforstrongholdchucks.aspx\" href=\"\/products\/onewaymountingadapterforstrongholdchucks\"\u003e\n    two Stronghold Mounting Adapters\n   \u003c\/a\u003e\n   (one for your inboard spindle nose, the other outboard.)\n  \u003c\/p\u003e\n  \u003c!--\n\n\u003cp\u003eVacuum chucking is a productive turner's dream of instant, positive, non-marring holding power and instant release of the work at the flip of a lever.  If your headstock spindle is through-bored with no cross holes, and is threaded at the outboard end, then you're ready to mount a vacuum chuck.\u003c\/p\u003e\n\n\u003cp\u003eYou'll need six components to complete the system: a Drum Chuck, a Rotary Air Fitting, a Vacuum Gauge Kit, a Vacuum Pump, and two threaded Stronghold Mounting Adapters (one for your inboard spindle nose, the other outboard.)\u003c\/p\u003e\n\n\u003cp\u003eOneway's heavy drum chucks are milled from solid aluminum stock, with smooth, rounded lips that seal well against convex, flat, or concave surfaces.  Ideally, use the largest chuck that will fit your work; the 5-1\/2\" model offers the greatest versatility for general work.  The vacuum gauge kit includes a large gauge, bleeder valve, mounting bracket with installation hardware, and 5 ft. of reinforced 3\/8\" air hose.  The vacuum pump is a 1\/3HP Gast unit which draws up to 26\" of Mercury, with 4.5 max. CFM.\u003c\/p\u003e\n\n--\u003e\n \n\u003c\/body\u003e","brand":"Oneway","offers":[{"title":"Default Title","offer_id":50821466423578,"sku":"181721","price":112.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/181721.jpg?v=1751674765","url":"https:\/\/www.highlandwoodworking.com\/products\/onewayvacuumgaugekit","provider":"Highland Woodworking","version":"1.0","type":"link"}