{"product_id":"shaper-origin-handheld-cnc-router","title":"Shaper Origin Handheld CNC Router","description":"\u003cp\u003eShaper Origin is a tool unlike anything you have seen before. It performs many of the tasks of an ordinary router, but with more precision. It performs many of the tasks of a CNC router, but more easily and with fewer restrictions. Origin locates itself in your workspace and makes continuous adjustments while cutting so you get the best result possible. Once you set up, select or upload your pattern, simply route following the path displayed on the screen. Origin will adjust to keep the cut in the right place. If you veer off too far, it will automatically raise the cutter out of the workpiece.\u003c\/p\u003e\n\u003cp\u003eOrigin doesn't require a computer to run. You can design on-tool or transfer design files from the ShaperHub online library. If you prefer to make detailed designs on your computer, Origin can handle that, too. Origin's control unit has a capacitive full color touch screen and WiFi to transfer design files and software updates. No WiFi? You can load design files through the USB port. Origin uses standard vector files (.SVG).\u003c\/p\u003e\n\u003cp\u003eThe Shaper SM-1 Spindle Motor was designed in cooperation with Festool, who makes it to their usual high standards. It has load-compensating speed control, soft start and safety cutoff for overload and overheating.\u003c\/p\u003e\n\u003cp\u003eOrigin's dust port accepts standard 27 mm \u0026amp; 36 mm dust hoses (like Fein \u0026amp; Festool).\u003c\/p\u003e\n\u003cp\u003eThe Shaper Origin comes with everything you need to get started right out of the box: the three most popular cutters, two rolls of ShaperTape and all required accessories. Everything is stored in a custom Tanos T-Loc Systainer 5.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRapid replacement - in the event of a failure, a replacement will be shipped immediately, without waiting for return of the problem tool.\u003c\/li\u003e\n\u003cli\u003eEnhanced support — live support over the phone Monday - Friday 9am-5pm Pacific time. \u003cspan style=\"font-style: italic;\"\u003e Phone support only available in English at this time. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-weight: bold;\"\u003e PLEASE NOTE: \u003c\/span\u003e Shaper Pro Care must be purchased with the tool and cannot be added later.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eShaper Packages\u003c\/h5\u003e\n\u003cp\u003eWe offer Shaper Origin with a variety of accessory packages at lower prices than if purchasing all components separately. For details on those accessories, see the individual pages of the Shaper Core Accessories (\u003ca data-prev-url=\"\/shaper-workstation.aspx\" href=\"\/products\/shaper-workstation\"\u003eWorkstation\u003c\/a\u003e, \u003ca data-prev-url=\"\/shaper-plate.aspx\" href=\"\/products\/shaper-plate\"\u003ePlate\u003c\/a\u003e and \u003ca data-prev-url=\"\/shaper-benchpilot.aspx\" href=\"\/products\/shaper-benchpilot\"\u003eBenchPilot\u003c\/a\u003e), you'll save $75 for each of the core accessories.\u003c\/p\u003e\n\u003cp style=\"font-weight: bold;\"\u003eThe BenchPilot and Shelf Upgrade Kit are now available for pre-order and will be shipped in December 2025.\u003c\/p\u003e\n\u003ch5\u003e30 Day Risk-free Trial\u003c\/h5\u003e\n\u003cp\u003eYou have 30 days to decide if Origin is right for you. If not, return the tool in its original packaging for a complete refund — just pay shipping!\u003c\/p\u003e\n\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eInput Power — 120 VAC, 60 H. 7 A\u003c\/li\u003e\n\u003cli\u003eSpindle Motor Power — 720 W\u003c\/li\u003e\n\u003cli\u003eSpindle Motor Speed — 10,000-26,000 rpm with load compensating speed control\u003c\/li\u003e\n\u003cli\u003eDepth Control — 43 mm (1.7\") total z-axis travel\u003c\/li\u003e\n\u003cli\u003eWeight — 14.5 lb\u003c\/li\u003e\n\u003cli\u003eDimensions — 13-3\/4\" wide (handle-to-handle) x 7-3\/4\" deep x 11-3\/4\" high\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDust Port — 34 mm (1-5\/16\") ID, 39 mm (1-9\/16\") OD — \u003cspan style=\"font-style: italic;\"\u003e Accepts standard 27 mm \u0026amp; 36 mm dust hoses (Festool \u0026amp; Fein type) \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n \n\u003ch5\u003eIncluded\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eShaper Origin\u003c\/li\u003e\n\u003cli\u003e1\/4\" collet\u003c\/li\u003e\n\u003cli\u003eTanos Systainer 5\u003c\/li\u003e\n\u003cli\u003eTwo rolls of \u003ca data-prev-url=\"\/shapertape.aspx\" href=\"\/products\/shapertape\"\u003eShaperTape\u003c\/a\u003e (150-ft each)\u003c\/li\u003e\n\u003cli\u003eTool change accessories\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca data-prev-url=\"\/shaper-origin-router-bits.aspx\" href=\"\/products\/shaper-origin-router-bits\"\u003e 1\/4\" upcut spiral cutter \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca data-prev-url=\"\/shaper-origin-router-bits.aspx\" href=\"\/products\/shaper-origin-router-bits\"\u003e 1\/8\" upcut spiral cutter \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca data-prev-url=\"\/shaper-origin-router-bits.aspx\" href=\"\/products\/shaper-origin-router-bits\"\u003e60 deg engraving cutter \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eOne-year warranty\u003c\/li\u003e\n\u003cli\u003eHighly responsive email support\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cp\u003eWhen using the Shaper Origin, many projects will require the use of double stick tape to hold your workpiece in place. We've been carrying the \u003ca data-prev-url=\"\/doublesticktape3x36yds.aspx\" href=\"\/products\/doublesticktape3x36yds\"\u003etape that Shaper recommends\u003c\/a\u003e for years. It's strong enough to hold turning projects on the lathe so it should hold your Shaper projects securely. We suggest that you order the 1-1\/2\" or 3\" tape. The last thing you want is your workpiece coming loose while you're routing.\u003c\/p\u003e\n\u003cp\u003eDue to Shaper policy, Highland Woodworking cannot ship Shaper products outside the U.S. Any Shaper order that we ship requires a U.S. shipping address.\u003c\/p\u003e","brand":"Shaper Tools","offers":[{"title":"Shaper Origin Handheld CNC Router","offer_id":51370264690970,"sku":"306251","price":2899.0,"currency_code":"USD","in_stock":true},{"title":"Origin + Workstation","offer_id":51370264723738,"sku":"306254","price":3299.0,"currency_code":"USD","in_stock":true},{"title":"Origin + Plate","offer_id":51370264756506,"sku":"306256","price":3199.0,"currency_code":"USD","in_stock":true},{"title":"Origin + Plate + Workstation","offer_id":51370264789274,"sku":"306258","price":3599.0,"currency_code":"USD","in_stock":true},{"title":"Origin + BenchPilot","offer_id":51370264822042,"sku":"306284","price":4323.0,"currency_code":"USD","in_stock":true},{"title":"Origin + Plate + BenchPilot","offer_id":51370264854810,"sku":"306285","price":4623.0,"currency_code":"USD","in_stock":true},{"title":"Origin + Workstation + BenchPilot","offer_id":51370264887578,"sku":"306286","price":4723.0,"currency_code":"USD","in_stock":true},{"title":"Origin + Plate + Workstation + BenchPilot","offer_id":51370264920346,"sku":"306287","price":5023.0,"currency_code":"USD","in_stock":true},{"title":"Origin + Workstation + BenchPilot + Shelf Upgrade Kit","offer_id":51370264953114,"sku":"306295","price":4897.0,"currency_code":"USD","in_stock":true},{"title":"Origin + Plate + Workstation + BenchPilot + Shelf Upgrade Kit","offer_id":51370264985882,"sku":"306288","price":5197.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0904\/5167\/3370\/files\/306251-06d.jpg?v=1768344532","url":"https:\/\/www.highlandwoodworking.com\/products\/shaper-origin-handheld-cnc-router","provider":"Highland Woodworking","version":"1.0","type":"link"}