Rikon Turning System Carbide Insert Cutters

Rikon Turning System Carbide Insert Cutters

Specifications

• Square — 13mm x 13mm x 3.2mm (~ 1/2" x 1/2" x 1/8")
• Round — 14mm Diameter x 3.2mm (~ 9/16" x 1/8")
• Diamond — 31mm x 13.8mm x 3.2mm (~ 1-1/4" x 9/16" x 1/8")
• Radius Detailing — 31mm x 13.8mm x 3.2mm (~ 1-1/4" x 9/16" x 1/8")
• R2 Radius Square — 14mm x 14mm x 3.2mm (~ 9/16" x 9/16" x 1/8")
• Semi-Circle — 14mm Diameter x 5mm (~ 25/32" x 3/16")
• Fingernail — 27mm x 13mm x 5mm (~ 1-1/16" x 1/2" x 3/16")
• Paisley Left — 27mm x 14mm x 5mm (~ 1-1/16" x 9/16" x 3/16")
• Paisley Right — 27mm x 14mm x 5mm (~ 1-1/16" x 9/16" x 3/16")

Rikon tungsten carbide insert cutters will stay sharp far longer than conventional carbon or high speed steel turning tools. Once a cutter finally becomes dull after many hours of use, it can be quickly rotated to provide a fresh sharp edge. Once all edges have become dull, they can be touched up with a diamond hone for additional use, or replaced with a new insert cutter.

Negative rake inserts are for tunring very hard materials like plastics, acrylics, resins and dense woods.

Comes with replacement screw.