SawStop Dust Collection Blade Guard

SawStop Dust Collection Blade Guard

This is the standard blade guard on 3HP Professional Cabinet Saws. If you have a 1.75hp Professional Cabinet Saw and would like to use the Overarm Dust Collector Attachment, you need to upgrade your saw with this guard.

This blade guard can also be used to upgrade SawStop Contractor's Saw for overhead dust collection.

You can also connect a shop vac hose directly to the port on the dust guard without using SawStop's Overarm Dust Collector Attachment if you figure a way to support the your hose from above in order to keep the table area free and clear. The O.D. of the port on the dust guard is 1-9/16". The I.D. is 1-5/16" and goes in for 3/4" where it reduces down to allow you to jam fit in an 1-1/4" O.D. fitting.

All Industrial Cabinet Saws and 3hp Professional Cabinet Saws come with this blade guard as standard equipment.

SawStop, the SawStop blade logo, and the configurations of SawStop products are either registered trademarks or trademarks of SawStop, LLC and are used with permission.

Due to SawStop policy, Highland Woodworking cannot ship SawStop products outside the U.S. Any SawStop order that we ship requires a U.S. shipping address.