Sculptured Rocker Hardboard Pattern Set

Sculptured Rocker Hardboard Pattern Set

This CNC milled set of hardboard patterns give you durable templates to enhance the parts layout process in making your Sculptured Rocking Chair based on the Charles Brock "Build a Sculptured Rocker Plans in 8/4". This set of permanent patterns work in conjunction with the paper patterns that come in the plans and is available separately for folks who purchased the plans at an earlier date.

Made from 1/8″ thick pressed hardboard they are rigid in shape and much easier for layout than using paper patterns, yet they are also flexible enough to work for the layout of parts having curves in the Z axis. In addition to the ease of use over paper patterns, these hardboard patterns will stand up to the use of making many rockers.

When you first get the hardboard patterns, you will mate them up with the paper patterns and permanently label each hardboard template. If you wish, you can then drill a hole and hang them on your shop wall, ready at hand and visible to inspire you to get to work on your second, third or more rockers!

If you bought your rocker plans a number of years ago, please read the notice below to be sure these patterns can work with your plans, as the older version of plans were for 10/4 stock and the newer version of plans are for building in 8/4 stock.

Notice: In order to use these permanent hardboard patterns, your existing Sculptured Rocker paper plans should show the title  "Build an 8/4 Sculptured Rocking Chair with Charles Brock" printed on your plans.  If not, you have the older version of the paper patterns designed for building the original version of the rocker using 10/4 stock.  These 8/4  hardboard patterns are only for working in concert with the more recent version of the plans building with 8/4 stock.

Videos