Items in Cart - 0
TRY OUR WOODWORKING
SEARCH ENGINE
Workshop Wisdom
CURRENT SPECIALS
FREE
STREAM 68 EPISODES
OF OUR TV SHOW
The Highland Woodworker
|
Sorby Stebcentre No. 2 Morse Taper Drive Center
 Sorby Stebcentre 1/2 in. 2MT 141994 Sorby Stebcentre - 7/8 inch 2MT Sorby Stebcentre - 1-1/4 inch 2MT |
|
Sorby Stebcentre No. 2 Morse Taper Drive Center
|
|
Select Product Options Here
Detailed Description
Sorby Stebcentre No. 2 Morse Taper Drive Center
This ingenious drive center should become a popular tool among spindle turners. The Stebcentre's spring-loaded center point allows you to set your workpiece
in place (or remove it) with the lathe turning. Your workpiece spins when you increase tailstock pressure and the Stebcentre's teeth bite into the wood. With
light pressure - it will drive your work, but allow it to stop if you have a catch, minimizing damage to your workpiece. With increased pressure - it will power
through even the heaviest cuts. Since its multiple teeth spread the pressure over a larger area, the Stebcentre is less likely to split your workpiece than a
standard spur.
If you don't know what size Morse Taper you may need, see our guide.
Product Warnings
 WARNING FOR RESIDENTS OF CALIFORNIA!
This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please read our Proposition 65 warning.
For more information, see www.P65Warnings.ca.gov.
|
|