Rikon 50-300 Oscillating Spindle Sander

Rikon 50-300 Oscillating Spindle Sander

Rikon's 50-300 Oscillating Spindle Sander makes no-load, no-burn shaping and finish sanding a snap on any straight or contoured edge. The sanding drum rotates at 1700 rpm and oscillates 15/16" up & down (29 opm), constantly presenting fresh, cool sandpaper that works far more efficiently than any fixed sanding drum.

The unit's beefy cast iron and steel structure is a definite step up from cheaper, less sturdy plastic models. The cast iron table features a handy rack-and-pinion system for easily adjusting the table angle from 0 to 45 degrees, and locks securely at both front and back. The unit comes equipped with spindles in 5 sizes, including 1/2", 3/4", 1", 1-1/2" and 2", and will accommodate spindles up to 3" diameter (available separately). A 2" dust port allows you to exhaust sanding dust to your shop vac.

The 50-300 sander is powered by a 1/2 HP TEFC 110V 3.4A motor. Unit weighs 76 lbs. FIVE YEAR warranty.

Specifications

• Motor: 1/2 HP TEFC; 110v; 3.4a
• No Load Speed: 1,700 rpm
• Cast Iron Table: 14-3/4" by 14-3/4"
• Table tilt: 0° to 45° forward
• Dust port: 2"
• Spindles: 1/2", 3/4", 1", 1-1/2" & 2" – all 4-1/2" long
• Spindle Oscillation: 15/16"
• Oscillations Per Minute(OPM): 29
• Overall size: 17-1/4" wide x 14-3/4" deep x 23-1/2" high
• Weight: 76 lbs
• Footprint: 11-13/16" x 11"
• FIVE-YEAR manufacturer's warranty.

Additional Information

Rikon 50-300 Oscillating Spindle Sander Manual

Rikon 50-300 Oscillating Spindle Sander Product Sheet