Camber Roller Assembly for Veritas Mk II Honing Guide

Camber Roller Assembly for Veritas Mk II Honing Guide

This barrel-shaped roller assembly replaces the standard flat roller base on the Veritas Mk II Standard Honing Guide. The Camber Roller lets you alternate finger pressure over either side of your plane blade to produce a slightly convex radius on the cutting edge. Instructors such as Toshio Odate and David Charlesworth advocate curved or cambered edges to prevent ridgelines when smoothing wide panels. Once installed, you still use the sliding stop to set bevel angles and the 3-position cam for micro-bevels if desired.

The Camber Roller is compatible with the Mark II Standard Honing Guide and the Mark II Narrow-Blade Honing Guide.