Items in Cart - 0

TRY OUR WOODWORKING
SEARCH ENGINE
Workshop Wisdom
CURRENT SPECIALS
FREE
STREAM 68 EPISODES
OF OUR TV SHOW
The Highland Woodworker
|
Waterlox Marine Gloss Finish - Quart
Waterlox Marine Gloss Finish - Quart
|
Highland Item # 195404
|
Shipped ground only!
|
Detailed Description
Waterlox Marine Gloss Finish - Quart
Waterlox is a reliable, easily applied tung oil-based varnish. Polymerized tung oil, ester gum, polymerized linseed oil,
and a high ratio of phenolic resin allow it to build a tough surface film which resists scuffs and staining admirably.
Waterlox Marine Finish is a clear, high gloss finish coat which penetrates wood, enabling it to resist moisture,
the harmful UV raysof the sun, salt and fresh water exposure, and heat and cold. Waterlox Original Marine Finish is
recommended for all exterior wood surfaces as a finish coat, such as marine furniture, paneling, all boat woodwork. Apply by wiping, brushing, rolling, spraying or with lambswool pad;
thin and clean up with mineral spirits or turpentine. Waterlox is tack-free and ready to recoat in 6-24 hours dependent
on temperature, humidity and ventilation. Repair is easy: sand out the damage and recoat! Begin all exterior finishing
projects with 1-2 coats of Waterlox Marine Sealer, followed by 1-2 coats of Waterlox Marine Finish.
Coverage is around 400 square feet per gallon per coat; soft woods require more coats than very hard woods.
Additional Information
Waterlox Marine Finish MSDS
Product Warnings
WARNING FOR RESIDENTS OF CALIFORNIA!
This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please read our Proposition 65 warning.
For more information, see www.P65Warnings.ca.gov.
|
|