Festool 14mm DOMINO Connector System

From $21.00

Shipping calculated at checkout.

Connector Component

Expansion Anchor - Pack of 32 Anchor Bolt - Pack of 32 Cross Anchor - Pack of 32 Double Bolt - Pack of 16 Extension Shell - Pack of 32 Corner EV Set - Pack of 32 Surface FV Set - Pack of 16 14x75mm Tenon - Pack of 104

Satisfaction Guarantee

If for any reason you are not satisfied with any stock item purchased from Highland Woodworking, return it to us within 60 days of receipt (30 days for Festool tools) and we will promptly replace it or refund the purchase price of that item, according to your preference.

Click for more information.

Shipping & Delivery

Orders are processed soon after receipt and are usually shipped within 2 business days via FedEx ground or US Mail, depending on location and weight.

We do not ship combustible materials by air.

If we are out of stock on an item, we will either back order or cancel that item according to any special instructions entered with your order or our ability to source the product.

Visit our complete Shipping Information Page for more detailed information.

California Customers - Prop 65 Warning

This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, see www.P65Warnings.ca.gov.

Did you find an error on this page?

We have made every effort to ensure our product pages are accurate and fully functioning. However, even we may miss something! If you see an error, please email us at feedback@highlandwoodworking.com. Include a link to the page, or the SKU number of the product, and short description of what’s wrong and we will address it. Thank you!

Due to Festool policy, we cannot ship Festool products outside the 48 contiguous U.S. states. Any Festool order that we ship requires an shipping address in the contiguous US.

Festool's DOMINO Connector System allows you to make quick, easy, reversible joints with your DOMINO DF 700 XL Joiner. These aren't ordinary knockdown (KD) furniture joints. DOMINO connector joints are easier to make AND more robust than standard KD joints. You can join table tops, panels and other joints any stock at least 1-3/16" (30mm) thick. Then, you can disassemble and re-assemble them later.

Each joint is milled 100% with the DOMINO DF 700 XL using a 14mm cutter(not included). If you're using the indexing pins on the DF 700, you don't even need a ruler.

The Connector System consists of nine components. Each is described below.

If you're just starting out with the Festool Domino Connector System, you may want to get the Festool DOMINO Connector Set Systainer SV-SYS. It has a complete collection of Connector fittings organized in a Systainer - everything you need to start except the Domino XL machine and the 14mm cutter.

Component	Description	Festool #
Expansion Anchor SV-SA Pack of 32	The Expansion Anchor slides into a inline mortise for a Corner Connector and locks in place when you tighten the anchor bolt. It expands into a mortise and the teeth grip the wood. Once the Expansion Anchor has been installed, it can not be removed.	201349
Anchor Bolt SV-AB Pack of 32	The Anchor Bolt locks the Expansion Anchor into an inline mortise, then serves as the connection to a Cross Anchor in when making a Corner Connector	201350
Cross Anchor SV-QA Pack of 32	The Cross Anchor slides into a cross mortise for either a Straight Connector or a Corner Connector. Either an Anchor Bolt or a Double Bolt provide the connection to the other side of the joint. The Cross Anchor is completely removable. When using a Cross Anchor in MDF or particle board, we recommend adding an Extension Shell for strength and stability.	201351
Double Bolt SV-DB Pack of 16	The Double bolt is the heart of the Straight Connector. It makes the connection between two cross anchors - one in each workpiece. It can be used with either one or two alignment shells - depending on the application. Each Double Bolt includes four half shells to make two complete alignment shells.	201352
Extension Shell SV-V Pack of 32	Extension Shells widen the Cross Anchor to provide stability and improve pressure distribution. They are recommended for use in particle board and MDF. Includes 64 half-shells to make 32 whole shells.	201498
Corner EV Set Pack of 32	The Corner EV Set is a complete connector for joining two workpieces at a 90° angle. Each Corner EV Set includes one Anchor Bolt, one Expansion Anchor and one Cross Anchor.	201827
Surface FV Set Pack of 16	The Surface FV Set is a complete connector for joining two inline workpieces - like a panel. Each Surface FV Set includes one Double Bolt, two Cross Anchors and two Extension Shells.	201828
14mm x 75m Connector Tenon Pack of 104	The other components of the DOMINO Connector system hold the joints together. Each joint should have at least one Connector Tenon to alignment and strength. The Connector Tenon is like other 14mm DOMINO Tenons, but in a length specific to Connector Joints.	201499