Festool Guide Rail

Festool's FS Guide rails are available in several lengths from 32" to 118" (800 - 3000mm). They have dual glide strips on top so your tools slide easily and dual non-skid strips on the bottom so the rail stays in place.

TS Plunge Saws

The integrated splinterguard nearly eliminates tearout on cross and rip cuts while aligning perfectly to your cut line.When used with Festool TS Plunge saws, the maximum effective cut will be about 6" shorter that the overall guide rail length.

Jigsaws & Routers

All models of Festool jig saws and routers can be used with the guide rails for precise guided cuts.

The special Hole Series Guide Rails are designed to be used with an OF 1010 EQ or OF 1400 EQ Router router and the LR 32 Hole Drilling Set to rout shelf pin and hinge holes when making 32mm system cabinets. Except for the holes, these guide rails are identical to standard guide rails. You can use them with a plunge saw or jig saw, just like standard rails.

Cross Cut Rails

Cross Cut Guide Rails are used with the Festool HK 55 EQ Carpenter's Saw and Festool HKC 55 EB Cordless Carpenter's Saw

Accessories

Festool offers a wide range of accessories to add to the utility of your guide rails. All of the guide rails can be joined using Guide Rail Connectors for added length. The Screw Clamps, Quick Clamp, FS-Rapid Clamp and Gecko Set hold the guide rail in place while working. The Angle Unit and Limit Stop help guide your cuts. There's even a Tote Bag for guide rails up to 55 inches long.

Product Videos