Hedgehog Spiral Featherboard

Hedgehog Spiral Featherboard

The Hedgehog spiral Featherboard makes it much easier to cut safely and accurately on the table saw, band saw or router table. Its unique spiral shape and single pivot point speed up and simplify featherboard setup. The genius of the Hedgehog feather board design is that it lets you set and reset quickly to the changing width of your primary stock board as it narrows with each cut (or when cutting the same dimension from boards of varying widths).

It can be re-configured to use on the left or right side of the fence and two can be stacked - using the stacking accessory - to better control thick workpieces. The stacking accessory REQUIRES two Hedgehogs. It spaces them apart by 1-1/2" and creates a total height of 2-1/4".

The Hedgehog is designed for machines with 3/4" (19mm) miter slots.

Videos

Hedgehog Spiral Featherboard