Hofmann & Hammer Premium German Workbench - Large

Hofmann & Hammer Premium German Workbench - Large

The workmanship that goes into this fine woodworking workbench is simply outstanding. Joints are as perfect as most of us usually just wish for; solid beech stock is straight, clear and beautifully finished. This largest H&H model comes complete, ready for assembly. (Bolt the stretchers to the legs, then lay on the top - you're done!) It has a shoulder vise with wooden jaw mounted flush with the left end of the bench, a traditional tail vise with square dog holes in the moving jaw, vise handles, and pair of square-style 9" steel bench dogs. A full-length tool well with clean-out ramps runs along the rear of the work surface, and there's a drawer mounted just under the top as well.

Specifications (Metric measurements are precise manufacturers specs, inch measurements are approximate.)

• Table Size — 25-3/8" x 84-5/8" (645mm x 2150mm)
• Table Size including vise overhang — 32-1/2" x 94-1/2" (825mm x 2400mm)
• Table Top Thickness — 2-1/4" (55mm)
• Table Skirt Thickness — 4-1/4" (108mm)
• Table Height — 34-1/4" (870mm)
• Front Vise Width — 19-11/16" (500mm)
• Front Vise Opening — 9" (230mm)
• Tail Vise Overall Size — 9-7/16" x 24-7/16" (240mm x 620mm)
• Tail Vise Length — 24-7/16" (620mm)
• Tail Vise Overhang — 3-3/8" (85mm)
• Tail Vise Travel — 9-5/8" (245mm)
• Weight — 287lbs (130kg)
• Bench Material — European Beech
• Finish — cold-pressed rapeseed oil

Additional Information

Click here to download Assembly Workbench Instructions