Zero-Clearance Throat Plate
Backorder Item
This item is currently on backorder. We are accepting orders and will ship as soon as stock is replenished.
Satisfaction Guarantee
Satisfaction Guarantee
If for any reason you are not satisfied with any stock item purchased from Highland Woodworking, return it to us within 60 days of receipt (30 days for Festool tools) and we will promptly replace it or refund the purchase price of that item, according to your preference.
Click for more information.
Shipping & Delivery
Shipping & Delivery
Orders are processed soon after receipt and are usually shipped within 2 business days via FedEx ground or US Mail, depending on location and weight.
We do not ship combustible materials by air.
If we are out of stock on an item, we will either back order or cancel that item according to any special instructions entered with your order or our ability to source the product.
Visit our complete Shipping Information Page for more detailed information.
California Customers - Prop 65 Warning
California Customers - Prop 65 Warning
This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, see www.P65Warnings.ca.gov.
Did you find an error on this page?
Did you find an error on this page?
We have made every effort to ensure our product pages are accurate and fully functioning. However, even we may miss something! If you see an error, please email us at feedback@highlandwoodworking.com. Include a link to the page, or the SKU number of the product, and short description of what’s wrong and we will address it. Thank you!
Not sure which size plate you need?? See our throat plate fit chart below.
Custom throat plates are one of the handiest accessories for your saw, preventing cut-off kickback, limiting chip-out and providing solid stock support. Our melamine-coated solid phenolic resin, zero clearance blanks made by Leecraft are flatter, stiffer and slicker than any other throat plate inserts you can buy.
Most models of these insert plates feature lateral and end adjustment screws, leveling screws that are accessible from the top, a lug to keep the blank's rear from lifting and a finger hold for easy removal. (Not all of the throat plate features listed are appropriate for every model of saw the plates fit.) The bottom of each blank is pre-recessed to accommodate your saw blade, so you can more easily begin to cut the blade opening through the plate.
Instructions for safely cutting through the plate are included. Please follow them carefully.
Please note: Throat plate colors are random and may be a different color than pictured.
We carry zero clearance throat plates for many table saws and miter Saws. Please check the size chart below to find the plate for your saw and select the correct plate from the drop down list above.
Please measure your throat plate to make sure you get the right one.
| Model | Length | Width | Thickness | Fits |
|---|---|---|---|---|
| BH-1 | 13-9/16" | 3-3/4" | 7/16" |
Zero Clearance with riving knife slot Bosch 4100 & 4000 |
| BH-2 | 13-9/16" | 3-3/4" | 7/16" |
Zero Clearance/Dado without riving knife slot Bosch 4100 & 4000 |
| CR-1 | 14" | 3-3/4" | 3/16" | Sears Craftsman 10" belt-drive models 1977 to mid 2004 (check size, see DL-1U) RIDGID TS2412, TS2424, TS2400, TS2400-0, TS3612 |
| CR-2 | 14-3/8" | 3-3/4" | 3/16" | Sears Craftsman, OLDER (circa 1964-1977) 10" belt-drive, including models: 113.29901, 113.29902, 113.29903, 113.29904, 113.29943, 113.299142, 113.29960 |
| CR-3 | 14-3/8" | 3-3/4" | 3/32" | Sears Craftsman, VINTAGE (circa 1947-1964) 10" belt-drive, including models: 103.29992, 113.22401, 113.22411, 113.27520, 113.27610, 113.27970, 113.29920, 113.29990, 113.29991, 113.29992 |
| CR-4 | 15-1/8" | 4-1/8" | 1/8" | Sears Craftsman 21833 (351.218330) Grizzly G0715P, G0833P; Dayton 4KXD1 Shop Fox W1824, W1851; Rikon 10-205 Masterforce 240-0036, 240-0037; Jet JTS-250CSX |
| DL-1U | 13-3/8" | 3-3/4" | 1/2" | Delta: Unisaw & LEFT-TILT UNISAW, 10" Contractor,10" Tilt Arbor Saw, “Hybrid” & Left-Tilt Contractor Grizzly G1023 Jet CTAS-10 Powermatic 63 Sears Craftsman 22104, 22114, 22124 Bridgewood BW10TS Steel City 35605, 35610, 35670, 35675, 35680, 35685 |
| DL-2 | 12-1/2" | 3-3/4" | 3/32" | Delta Models: 34-670, 34-740 (Super-10), 36-380 (XL-10), 36-600, QT-10, TS-300 & TS-350 Jet: JSL-10TS (Shopline), JTS-10DD |
| DL-4 | 24-25/32" | 4-23/32" | Delta RT-40 | |
| DL-5 | 10-5/32" | 3-9/16" | Delta 9" Rockwell | |
| DL-6 | 14-1/2" | 5" | 17/32" - 31/64" |
Zero Clearance/Dado without riving knife slot Delta: New Unisaw 36-L336, 36-L352, 36-L552 |
| DL-7 | 14-1/2" | 5" | 17/32" - 31/64" |
Zero Clearance with riving knife slot Delta: New Unisaw 36-L336, 36-L352, 36-L-552 |
| DW-1 | 10" | 2-5/8" | 1/4" - 1/8" | DeWalt 12" Miter Saws: DW703, DW704, DW705, DW705S, DW706, DW713, DW715, DW716 |
| DW-2 | 13-9/16" | 3-3/4" | 29/64" | DeWalt: DW744 & DW745 (factory splitter/guard incompatible with DW-2 insert on the DW744 & DW755 saws); DW746 & DeWalt DWE7480, DWE7490X, DWE7491RS, DWE7499GD |
| DW-3 | 13-9/16" | 3-3/4" | 29/64" |
Dado Insert (with Expanded Dado Pocket) DeWalt: DW744 & DW745 (factory splitter/guard incompatible with DW-2 insert on the DW744 & DW755 saws); DW746 & DeWalt DWE7480, DWE7490X, DWE7491RS, DWE7499GD |
| DW-4 | 17-3/8" | 3-5/16" | 3/8" | DeWalt 12" Compound Sliding Miter Saws: DWS779, DWS780, DWS782, DHS780, DHS790 |
| DW-4Y | 17-3/8" | 3-5/16" | 3/8" | DeWalt 12" Compound Sliding Miter Saws: DWS779, DWS780, DWS782, DHS780, DHS790 (Same as the DW-4, but YELLOW!) |
| GE-1 | 13-13/16" | 3-1/2" | 25/64" | General International: 350 (Right Tilt) & 650 (Left Tilt) |
| GE-2 | 14-31/32" | 3-23/32" | 3/16" | General International: 50-220, 50-090K Jet: 10" Workshop Table Saw (Stock# 708100), JPS-10 Pro-Shop (Stock# 708480, 708481, 708482, 708483, 708480K) |
| GE-3 | 12-9/16" | 3-9/16" | 25/64" | General International: 50-075, 50-175, 50-185, 50-250, 50-260 |
| HT-1 | 15-1/8" | 3-3/4" | 1/8" | Hitachi: C10FL, C10LA Porter Cable: PCB270TS |
| JT-164 | 12-1/2" | 3-9/16" | 7/16" | Jet: JTS-10, JCS-10, JWTS-10, JTAS-10, JWCS-10 Powermatic: 64 & 64A (left-tilt) Sunhill: most 10" saws Bridgewood: TSC-10C & TSC-10CL King KC 10GC Shop Fox: W1703, W1714, W1725, W1726 Grizzly: G0444, G0444Z, G0575, G0576 |
| JT-2L | 13-5/16" | 3-11/16" | 1/2" | Jet XACTA SAW LEFT (JTAS10XL) Shop Fox: W1677, W1711 Grizzly G1023SL, G1023RL Please Note: Jet has used the JTAS-10XL model # for two different saws. Please measure your plate to be sure you get the correct plate. |
| JT-5 | 15-5/16" | 4-1/4" |
Zero Clearance with riving knife slot Jet JTAS-10XL Deluxe XACTA Saw Powermatic PM1000 Please Note: Jet has used the JTAS-10XL model # for two different saws. Please measure your plate to be sure you get the correct plate. |
|
| JT-6 | 15-5/16" | 4-1/4" |
Zero Clearance/Dado without riving knife slot Jet JTAS-10XL Deluxe XACTA Saw Powermatic PM1000 Please Note: Jet has used the JTAS-10XL model # for two different saws. Please measure your plate to be sure you get the correct plate. |
|
| JT-7 | 14" | 4-1/8" |
Zero Clearance with riving knife slot Jet ProShop Saw: JPS-10TS, 708490, 708491, 708492, 708493, 708494, 708495 Laguna Fusion 1.75hp 10" Table Saw Baleigh TS-1044H; Grizzly G0661 General International 50-090R M1 |
|
| JT-8 | 14" | 4-1/8" |
Zero Clearance/Dado without riving knife slot Jet ProShop Saw: JPS-10TS, 708490, 708491, 708492, 708493, 708494, 708495 Laguna Fusion 1.75hp 10" Table Saw Baleigh TS-1044H; Grizzly G0661 General International 50-090R M1 |
|
| JT-SS | 12-9/16" | 3-9/16" | 29/32" | Jet Super Saw JWSS-10LFR, JWSS-10PF, JWSS-CS, JWSS-10SPF |
| PM-1 | 14-7/16" | 4" | 27/64" | Powermatic 66; Bridgewood BW10LTS |
| PM-2 | 20-5/8" | 4" | 3/4" - 5/16" | Powermatic 72A |
| PM-3 | 17-5/8" | 4" | Old Powermatic 72 (full round ends) | |
| PM-5 | 17-7/8" | 4" | Old Powermatic 72 & 68 (rectangular - flat ends) | |
| PM-6 | 17-7/8" | 4-1/4" | 15/32" - 3/8" |
Zero Clearance with riving knife slot Powermatic PM2000 does not fit Powermatic PM2000B |
| PM-7 | 17-7/8" | 4-1/4" | 15/32" - 3/8" |
Zero Clearance/Dado without riving knife slot Powermatic PM2000 does not fit Powermatic PM2000B |
| Some Ridgid Saws use the CR-1 Plate (above) . Please check your Model # & measurements. | ||||
| RG-1 | 14" | 3-3/4" | 1/2" | RIDGID TS3650 & TS3660 (Cast Iron Top Contractor) |
| RG-2 | 13-15/16" | 3-3/4" | 7/16" | RIDGID TS2400LS, TS2410LS & TS2400-1 (Alloy Top Portable) |
| RG-3 | 14" | 3-3/4" | 3/8" |
Zero Clearance with riving knife slot RIDGID R4510, R45101 |
| RG-4 | 14" | 3-3/4" | 3/8" |
Zero Clearance/Dado without riving knife slot RIDGID R4510, R45101 |
| RG-5 | 15-1/8" | 3-3/4" | 1/8" |
Zero Clearance with riving knife slot RIDGID R4512; Shop Fox W1837; Craftex CX212 Grizzly G0771, G0771Z |
| RG-6 | 15-1/8" | 3-3/4" | 1/8" |
Zero Clearance/Dado without riving knife slot RIDGID R4512; Shop Fox W1837; Craftex CX212 Grizzly G0771, G0771Z |
| RK-1 | 14-1/2" | 4" | 1/2" | Rikon 10-050 & 10-110 |
| SC-1 | 14-11/16" | 3-3/4" | 1/2" |
Zero Clearance with riving knife slot Steel City 10" Riving Knife Cabinet Saw Model #35900 Series RIDGID R4511; Rikon 10-201, 11-200, 11-300 Sears Craftsman 351.221160 |
| SC-2 | 14-11/16" | 3-3/4" | 1/2" |
Zero Clearance/Dado without riving knife slot Steel City 10" Riving Knife Cabinet Saw Model #35900 Series RIDGID R4511; Rikon 10-201, 11-200, 11-300 Sears Craftsman 351.221160 |